DEVELOPMENT OF CONSTRUCTION OF THREE-INPUT GENERATING INSTALLATIONS ON BASED OF RENEWABLE ENERGY SOURCES

Author(s):  
Я.М. КАШИН ◽  
Л.Е. КОПЕЛЕВИЧ ◽  
А.В. САМОРОДОВ ◽  
Ч. ПЭН

Описаны конструктивные особенности трехвходовой аксиальной генераторной установки (ТАГУ), преобразующей кинетическую энергию ветра и световую энергию солнца и суммирующей механическую, световую и тепловую энергию с одновременным преобразованием полученной суммарной энергии в электрическую. Показаны преимущества ТАГУ перед двухвходовыми генераторными установками. Дополнительное включение стабилизатора напряжения в схему ТАГУ позволило расширить область применения стабилизированной трехвходовой аксиальной генераторной установки за счет стабилизации ее выходного напряжения. The design features of the three-input axial generating installation (TAGI), which converts the kinetic energy of wind and light energy of the sun and sums the mechanical, light and thermal energy with the simultaneous conversion of the total energy into electrical energy, are described. The benefits of TAGI in front of the two-input generating installation shown. The additional introduction of a voltage regulator into the TAGI scheme allowed to expand the scope of the stabilized three-input axial generating installation by stabilizing its output voltage.

2021 ◽  
Vol 2 (1) ◽  
pp. 31-36
Author(s):  
Sandip Patil ◽  
◽  
Ketan Dhande ◽  

India is a developing country, with a population of about 1,387,297,452. India requires a lot of energy both for development and running all its systems smoothly. Most of the energy consumed in India is in electrical form. The electrical energy consumption of India is around 1,137.00 billion kWh of electric energy per year. When counted per person, this energy comes to an average of around 841 kWh. When looking at the tactical data given out by the Indian government, 80% of the total electrical energy is produced using fossil fuels, even though there is a lot of abundant availability of renewable energy here in India. This paper studies the various renewable energy sources currently utilized in various sectors in India. This paper looks at the effect of technical efficiency gains on energy use in industrial, agricultural, and other sectors in India, at varying levels of aggregation. This paper gives the present status of energy sources and utilization areas. Although around 80% of the average temperature zone is available in the Indian subcontinent, the electrical energy produced in India via solar energy is less than around 1.3% of total consumption. India currently produces 63.730 GW, which is very less when compared to the total energy required. Similarly, India produces 32 GW of electrical energy from the wind sector, which is very little compared to the total energy consumption.


Author(s):  
Б.Х. ГАЙТОВ ◽  
Я.М. КАШИН ◽  
Л.Е. КОПЕЛЕВИЧ ◽  
А.В. САМОРОДОВ ◽  
Ч. ПЭН

Обоснована необходимость разработки эффективных генераторов аксиальной конструкции для преобразования кинетической энергии ветра и световой энергии солнца в электрическую энергию высокого качества. Дан сравнительный анализ существующих генераторных установок и разработанных авторами на уровне изобретений. Описаны конструктивные особенности и порядок работы двухвходовых аксиальных генераторных установок, позволяющих преобразовать энергию возобновляемых источников в электрическую энергию высокого качества. The need of the development efficient axial-flow generators to convert the kinetic energy of wind and light energy of the sun into electrical energy of high quality is substantiated. The comparative analysis of the existing generator sets and developed by the authors at the level of inventions is given. The design features and operating procedures of two-input axial generator sets, which allow to transform energy of renewable sources into high quality electric energy, are described.


Author(s):  
Alexey Dragunov ◽  
Eugene Saltanov ◽  
Igor Pioro ◽  
Pavel Kirillov ◽  
Romney Duffey

It is well known that the electrical-power generation is the key factor for advances in any other industries, agriculture and level of living. In general, electrical energy can be generated by: 1) non-renewable-energy sources such as coal, natural gas, oil, and nuclear; and 2) renewable-energy sources such as hydro, wind, solar, biomass, geothermal and marine. However, the main sources for electrical-energy generation are: 1) thermal - primary coal and secondary natural gas; 2) “large” hydro and 3) nuclear. The rest of the energy sources might have visible impact just in some countries. Modern advanced thermal power plants have reached very high thermal efficiencies (55–62%). In spite of that they are still the largest emitters of carbon dioxide into atmosphere. Due to that, reliable non-fossil-fuel energy generation, such as nuclear power, becomes more and more attractive. However, current Nuclear Power Plants (NPPs) are way behind by thermal efficiency (30–42%) compared to that of advanced thermal power plants. Therefore, it is important to consider various ways to enhance thermal efficiency of NPPs. The paper presents comparison of thermodynamic cycles and layouts of modern NPPs and discusses ways to improve their thermal efficiencies.


2020 ◽  
Vol 60 (1) ◽  
pp. 287-294
Author(s):  
C. Dumitrescu ◽  
R. Rădoi ◽  
C. Cristescu ◽  
L. Dumitrescu

The article presents an experimental model of a modular structure system for the production of thermal energy and the results of conducting specific tests. The experimental model uses two renewable energy sources - solar energy and energy generated by burning biomass - to provide thermal energy for an increased duration, regardless of the atmospheric factors. Properly sized, the system can be designed as a series product, in a variety of powers, to be used by heat suppliers, and also by individuals, especially the ones from remote areas, who want to ensure their thermal energy independence by using renewable energy.


Author(s):  
Archana Sudhakar Talhar ◽  
Sanjay B. Bodkhe

This paper gives a review of energy scenario in India and other countries. Today’s demand of the world is to minimize greenhouse gas emissions, during the production of electricity. Henceforth over the world, the production of electrical power is changing by introducing abundantly available renewable energy sources like sun and wind. But, because of the intermittent nature of sustainable power sources, the electrical power network faces many problems, during the transmission and distribution of electricity. For resolving these issues, Electrical Energy Storage (EES) is acknowledged as supporting technology. This paper discusses about the world electrical energy scenario with top renowned developed countries in power generation and consumption. Contribution of traditional power sources changed after the introduction of renewable energy sources like sun and wind. Worldwide Agencies are formed like International Energy Agency (IEA), The Central Intelligence Agency, (CIS) etc. The main aim of these agencies is to provide reliable, affordable and clean energy. This paper will discuss about the regulatory authority and government policies/incentives taken by different countries.  At the end of this paper, author focuses on obstacles in implementation, development and benefits of renewable energy.


Author(s):  
Vulisi Narendra Kumar ◽  
Gayadhar Panda ◽  
Bonu Ramesh Naidu

The growing demand for electrical energy calls for the assimilation of renewable energy sources to the main utility grid. Multiple renewable energy sources (RESs) like solar PV array, wind turbine, micro-hydro plant, etc. can be combined and controlled to form a microgrid. In spite of the availability of different microgrid topologies, DC microgrid largely facilitates the injection of DC power from various renewable energy sources into the stabilised DC power pool. The requirement for a minimal number of conversion stages, simple structure, economic operation, and numerous localised applications are driving factors for the DC microgrid technology. The mettle of the DC microgrid technology lies in choosing the appropriate microgrid participants for energy interchange and the suitable supervisory control to tap power from the microgrid partakers even after respecting their operating constraints. The use of high gain DC-DC converters is inevitable in DC microgrid due to the low terminal voltage levels of different RESs.


2020 ◽  
Author(s):  
Aleksandr Ivakhnenko ◽  
Beibarys Bakytzhan

<p>In global socioeconomic development facing climate change challenges to minimize the output of greenhouse gas (GHG) emissions and moving to a more low-carbon economy (LCE) the major driving force for success in achieving Sustainable Development Goals (SDGs) is the cost of energy generation. One of the main factors for energy source selection in the power supply and energy type generation process is the price parameters often influenced at different degree by government policies incentives, technological and demographic challenges in different countries. We research the energy sources situation and possible development trends for developing country Kazakhstan with resource-based economy. In general, the economic aspects affect the quality and quantity of energy generated from different sources with incentives for environmental concern. Traditional energy sources in Kazakhstan, such as coal, oil and natural gas remain low-cost in production due to high reserve base, which leads to steady growth in this area. In general, the cost for generating 1 kWh of energy from the cheapest carbon source of energy sub-bituminous coal is about 0.0024 $, for natural gas 0.0057 $, conventional oil 0.0152 $ (conventional diesel is 0.0664 $) and for expensive unconventional oil 0.0361 $, whereas renewable hydrocarbons could potentially become more competitive with unconventional oil production (methanol 0.0540 $, biodiesel 0.0837 $, bioethanol 0.1933 $ for generating 1 kWh). Furthermore, we consider the main non-traditional and renewable energy sources of energy from the sun, wind, water, and biofuels, hydrogen, methane, gasoline, uranium, and others. There is a difference between the breakeven prices of conventional gas and biomethane (0.0057 $ and 0.047 - 0.15 $ respectively averaging 0.0675 $ per 1 kWh for biomethane) which is often related to the difference in their production methods. The main advantage of biomethane is environmentally friendly production. We also propose an assessment of fuel by environmental characteristics, where one of the hazardous sources Uranium is forth cheap 0.0069 $ per kWh, but the environmental damage caused by its waste is the greatest. At the same time hydropower is seven times more expensive than uranium, but it does not cause direct health damage issues, however influencing significantly ecosystem balance. Hydrogen fuel is the most expensive among others. Overall in Kazakhstan energy-producing from the sun, wind and biogas is more expensive comparing with global trends from 0.4 to 5.5 cents per 1 kWh, but remains cheaper for hydropower. In addition, based on the research findings we analyzed the potential for sustainable non-renewable and renewable energy development in the future for the case of the resource-based economy in Kazakhstan. </p>


2014 ◽  
Vol 659 ◽  
pp. 463-468
Author(s):  
Adrian Alexandru Şerbănoiu ◽  
Gabriel Teodoriu ◽  
Bogdan Serbanoiu ◽  
Ion Serbanoiu ◽  
Marina Verdeș ◽  
...  

The major objective of this paper is to optimize the relationship insurance energy source - high thermal insulation of the building envelope analyzed in order to minimize the financial effort incurred by the beneficiary. In this respect, the paper proposes a methodology for analyzing the financial perspective of the relation envelope - equipment that capitalizes renewable energy sources, built on a newer concept - optimal cost.


Sign in / Sign up

Export Citation Format

Share Document