scholarly journals An uncomplicated electrochemical sensor combining a perfluorocarbon SAM and ACE2 as the bio-recognition element to sensitively and specifically detect SARS-CoV-2 in complex samples.

2020 ◽  
Author(s):  
Vincent Vezza ◽  
Adrian Butterworth ◽  
Perrine Lasserre ◽  
Ewen O Blair ◽  
Alexander MacDonald ◽  
...  
Keyword(s):  
Specific Binding ◽  
Low Cost ◽  
Diagnostic Testing ◽  
Economic Effects ◽  
Spike Protein ◽  
Clinical Samples ◽  
Label Free ◽  
Ambient Conditions ◽  
Electrochemical Assay ◽  
Recognition Element

Emerging in late 2019, the SARS-CoV-2 virus has had a devastating health and economic effects around the world forcing governments to enact restrictions on day to day life, resulting in severe economic and social disruption. The virus has stimulated new research in the fields of drug development, vaccinology and diagnostic testing. Here we present the basis for a simple, mass manufacturable saliva based electrochemical assay for the SARS-CoV-2 virus acheived through adsorption of the Angiotsnsin Converting Enzyme 2 (ACE2) into thiolated amphiphobic prefluoro monolayer assemled on a gold sensor surface. Following sensor preparation, it is possible to measure specific binding of recombinant spike protein and discriminate positive and negative samples of inactivated SARS-CoV-2 following 30 minutes incubation under ambient conditions. Representative calculations of limits of detection are made for recombinant spike protein (1.68 ng/ml) and inactivated virus (37.8 dC/mL). The assay as presented ultimately shows discrimination between positive and negative inactivated SARS-CoV-2 samples originating from clinical molecular standards kit intended for clinical and biomedical assay validation, and which is designed to mimic clinical samples through presence of cells and proteins in the sample medium. The simple design of the label free measurement and the selection of reagents involved means the assay has clear potential for transfer onto mass producible units such as screen-printed electrodes similar to glucose-format test strips, to enable widespread, low cost and rapid testing for SARS-CoV-2 in the general population

scholarly journals An uncomplicated electrochemical sensor combining a perfluorocarbon SAM and ACE2 as the bio-recognition element to sensitively and specifically detect SARS-CoV-2 in complex samples.

2020 ◽  
Author(s):  
Vincent Vezza ◽  
Adrian Butterworth ◽  
Perrine Lasserre ◽  
Ewen O Blair ◽  
Alexander MacDonald ◽  
...  
Keyword(s):  
Specific Binding ◽  
Low Cost ◽  
Diagnostic Testing ◽  
Economic Effects ◽  
Spike Protein ◽  
Clinical Samples ◽  
Label Free ◽  
Ambient Conditions ◽  
Electrochemical Assay ◽  
Recognition Element

Emerging in late 2019, the SARS-CoV-2 virus has had a devastating health and economic effects around the world forcing governments to enact restrictions on day to day life, resulting in severe economic and social disruption. The virus has stimulated new research in the fields of drug development, vaccinology and diagnostic testing. Here we present the basis for a simple, mass manufacturable saliva based electrochemical assay for the SARS-CoV-2 virus acheived through adsorption of the Angiotsnsin Converting Enzyme 2 (ACE2) into thiolated amphiphobic prefluoro monolayer assemled on a gold sensor surface. Following sensor preparation, it is possible to measure specific binding of recombinant spike protein and discriminate positive and negative samples of inactivated SARS-CoV-2 following 30 minutes incubation under ambient conditions. Representative calculations of limits of detection are made for recombinant spike protein (1.68 ng/ml) and inactivated virus (37.8 dC/mL). The assay as presented ultimately shows discrimination between positive and negative inactivated SARS-CoV-2 samples originating from clinical molecular standards kit intended for clinical and biomedical assay validation, and which is designed to mimic clinical samples through presence of cells and proteins in the sample medium. The simple design of the label free measurement and the selection of reagents involved means the assay has clear potential for transfer onto mass producible units such as screen-printed electrodes similar to glucose-format test strips, to enable widespread, low cost and rapid testing for SARS-CoV-2 in the general population

scholarly journals Electrochemical DNA Detection Methods to Measure Circulating Tumour DNA for Enhanced Diagnosis and Monitoring of Cancer

Proceedings ◽  
2020 ◽  
Vol 60 (1) ◽  
pp. 15
Author(s):  
Bukola Attoye ◽  
Matthew Baker ◽  
Chantevy Pou ◽  
Fiona Thomson ◽  
Damion K. Corrigan
Keyword(s):  
Point Of Care ◽  
Low Cost ◽  
Detection Methods ◽  
Clinical Samples ◽  
Label Free ◽  
Ambient Conditions ◽  
Liquid Biopsies ◽  
Current Time ◽  
Electrochemical Approach ◽  
Label Free Detection

Liquid biopsies are becoming increasingly important as a potential replacement for existing biopsy procedures which can be invasive, painful and compromised by tumour heterogeneity. This paper reports a simple electrochemical approach tailored towards point-of-care cancer detection and treatment monitoring from biofluids using a label-free detection strategy. The mutations under test were the KRAS G12D and G13D mutations, which are both important in the development and progression of many human cancers and which have a presence that correlates with poor outcomes. These common circulating tumour markers were investigated in clinical samples and amplified by standard and specialist PCR methodologies for subsequent electrochemical detection. Following pre-treatment of the sensor to present a clean surface, DNA probes developed specifically for detection of the KRAS G12D and G13D mutations were immobilized onto low-cost carbon electrodes using diazonium chemistry and 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride/N-hydroxysuccinimide coupling. Following the functionalisation of the sensor, it was possible to sensitively and specifically detect a mutant KRAS G13D PCR product against a background of wild-type KRAS DNA from the representative cancer sample. Our findings give rise to the basis of a simple and very low-cost system for measuring ctDNA biomarkers in patient samples. The current time to result of the system was 3.5 h with considerable scope for optimisation, and it already compares favourably to the UK National Health Service biopsy service where patients can wait weeks for their result. This paper reports the technical developments we made in the production of consistent carbon surfaces for functionalisation, assay performance data for KRAS G13D and detection of PCR amplicons under ambient conditions.

scholarly journals Plasmonic random laser biosensor on fiber facet for label-free detecting biomolecules

2020 ◽  
Author(s):  
Xiaoyu Shi ◽  
Kun Ge ◽  
Junhua Tong ◽  
Tianrui Zhai
Keyword(s):  
Clinical Medicine ◽  
Specific Binding ◽  
Low Cost ◽  
Protein A ◽  
Random Laser ◽  
Label Free ◽  
Refractive Index Sensitivity ◽  
Near Surface ◽  
Medical Diagnostic ◽  
Index Sensitivity

Abstract Low-cost and miniaturized biosensors are key factors leading to the possibility of portable and integrated biomedical system, which play an important role in clinical medicine and life sciences. Random lasers with simple structures provide opportunities for detecting biomolecules. Here, a low-cost biosensors on fiber facet for label-free detecting biomolecules is demonstrated resorting to plasmonic random laser. The random laser is achieved resorting to a random plasmonic scattering structure of Ag nanoparticles and polymer film on fiber facet. Refractive index sensitivity and near-surface sensitivity of the biosensor are systematically studied. Furthermore, the biosensor is used to detect lgG through specific binding to protein A , exhibiting the detecting limit of 0.68 nM. It is believed that this work may promote the applications of plasmonic random laser bio-probe in portable or integrated medical diagnostic platforms, and provide fundamental understanding for the life science.

scholarly journals Graphene Quantum Dot-Based Electrochemical Immunosensors for Biomedical Applications

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 96 ◽  
Author(s):  
Bhargav D. Mansuriya ◽  
Zeynep Altintas
Keyword(s):  
Electrochemical Sensors ◽  
Point Of Care ◽  
Low Cost ◽  
Graphene Quantum Dots ◽  
Clinical Samples ◽  
Label Free ◽  
Electrochemical Immunosensors ◽  
Biomedical Diagnosis ◽  
Electrochemical Immunosensing ◽  
Distinct Features

In the area of biomedicine, research for designing electrochemical sensors has evolved over the past decade, since it is crucial to selectively quantify biomarkers or pathogens in clinical samples for the efficacious diagnosis and/or treatment of various diseases. To fulfil the demand of rapid, specific, economic, and easy detection of such biomolecules in ultralow amounts, numerous nanomaterials have been explored to effectively enhance the sensitivity, selectivity, and reproducibility of immunosensors. Graphene quantum dots (GQDs) have garnered tremendous attention in immunosensor development, owing to their special attributes such as large surface area, excellent biocompatibility, quantum confinement, edge effects, and abundant sites for chemical modification. Besides these distinct features, GQDs acquire peroxidase (POD)-mimicking electro-catalytic activity, and hence, they can replace horseradish peroxidase (HRP)-based systems to conduct facile, quick, and inexpensive label-free immunoassays. The chief motive of this review article is to summarize and focus on the recent advances in GQD-based electrochemical immunosensors for the early and rapid detection of cancer, cardiovascular disorders, and pathogenic diseases. Moreover, the underlying principles of electrochemical immunosensing techniques are also highlighted. These GQD immunosensors are ubiquitous in biomedical diagnosis and conducive for miniaturization, encouraging low-cost disease diagnostics in developing nations using point-of-care testing (POCT) and similar allusive techniques.

scholarly journals A Camera Phone Localised Surface Plasmon Biosensing Platform towards Low-Cost Label-Free Diagnostic Testing

2011 ◽  
Vol 2011 ◽  
pp. 1-7 ◽  
Author(s):  
Philip J. R. Roche ◽  
Sandrine Filion-Côté ◽  
Maurice C.-K. Cheung ◽  
Vamsy P. Chodavarapu ◽  
Andrew G. Kirk
Keyword(s):  
Surface Plasmon ◽  
Incubation Time ◽  
Point Of Care ◽  
Low Cost ◽  
Diagnostic Testing ◽  
Localized Surface Plasmon ◽  
Label Free ◽  
Camera Phone ◽  
Commercial System ◽  
Chemokine Ligand

Developmental work towards a camera phone diagnostic platform applying localized surface plasmon resonance (LSPR) label-free sensing is presented. The application of spherical gold nanoparticles and nanorods are considered and assessed against ease of application, sensitivity, and practicality for a sensor for the detection of CCL2 (chemokine ligand 2). The sensitivity of the platform is compared with that of a commercial UV/Vis spectrometer. The sensitivity of the camera phone platform is found to be 30% less than that of the commercial system for an equivalent incubation time, but approaches that of the commercial system as incubation time increases. This suggests that the application of LSPR sensing on a portable camera phone devices may be a highly effective label-free approach for point-of-care use as a low-cost diagnostic sensing tool in environments where dedicated equipment is not available.

scholarly journals Demonstration of a Label-Free and Low-Cost Optical Cavity-Based Biosensor Using Streptavidin and C-Reactive Protein

Biosensors ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 4
Author(s):  
Donggee Rho ◽  
Seunghyun Kim
Keyword(s):  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Optical Cavity ◽  
Sample Volume ◽  
Small Sample ◽  
Label Free ◽  
C Reactive Protein ◽  
Reactive Protein ◽  
Cavity Structure

An optical cavity-based biosensor (OCB) has been developed for point-of-care (POC) applications. This label-free biosensor employs low-cost components and simple fabrication processes to lower the overall cost while achieving high sensitivity using a differential detection method. To experimentally demonstrate its limit of detection (LOD), we conducted biosensing experiments with streptavidin and C-reactive protein (CRP). The optical cavity structure was optimized further for better sensitivity and easier fluid control. We utilized the polymer swelling property to fine-tune the optical cavity width, which significantly improved the success rate to produce measurable samples. Four different concentrations of streptavidin were tested in triplicate, and the LOD of the OCB was determined to be 1.35 nM. The OCB also successfully detected three different concentrations of human CRP using biotinylated CRP antibody. The LOD for CRP detection was 377 pM. All measurements were done using a small sample volume of 15 µL within 30 min. By reducing the sensing area, improving the functionalization and passivation processes, and increasing the sample volume, the LOD of the OCB are estimated to be reduced further to the femto-molar range. Overall, the demonstrated capability of the OCB in the present work shows great potential to be used as a promising POC biosensor.

scholarly journals Integrating high-performing electrochemical transducers in lateral flow assay

2021 ◽  
Author(s):  
Antonia Perju ◽  
Nongnoot Wongkaew
Keyword(s):  
High Performance ◽  
Point Of Care ◽  
Low Cost ◽  
High Sensitivity ◽  
Lateral Flow ◽  
Analytical Performance ◽  
Label Free ◽  
High Performing ◽  
Lateral Flow Assays ◽  
Electrochemical Transducers

AbstractLateral flow assays (LFAs) are the best-performing and best-known point-of-care tests worldwide. Over the last decade, they have experienced an increasing interest by researchers towards improving their analytical performance while maintaining their robust assay platform. Commercially, visual and optical detection strategies dominate, but it is especially the research on integrating electrochemical (EC) approaches that may have a chance to significantly improve an LFA’s performance that is needed in order to detect analytes reliably at lower concentrations than currently possible. In fact, EC-LFAs offer advantages in terms of quantitative determination, low-cost, high sensitivity, and even simple, label-free strategies. Here, the various configurations of EC-LFAs published are summarized and critically evaluated. In short, most of them rely on applying conventional transducers, e.g., screen-printed electrode, to ensure reliability of the assay, and additional advances are afforded by the beneficial features of nanomaterials. It is predicted that these will be further implemented in EC-LFAs as high-performance transducers. Considering the low cost of point-of-care devices, it becomes even more important to also identify strategies that efficiently integrate nanomaterials into EC-LFAs in a high-throughput manner while maintaining their favorable analytical performance.

scholarly journals SARS-CoV-2 full length spike protein for COVID-19 vaccine development and diagnostic testing

2021 ◽  
Vol 147 (2) ◽  
pp. AB152
Author(s):  
Crystal Richardson ◽  
Mayuresh Abhyankar ◽  
Jillian Bracaglia ◽  
Sayeh Agah ◽  
Zachary Schuhmacher ◽  
...  
Keyword(s):  
Vaccine Development ◽  
Diagnostic Testing ◽  
Full Length ◽  
Spike Protein

scholarly journals Direct diagnostic testing of SARS-CoV-2 without the need for prior RNA extraction

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Shan Wei ◽  
Esther Kohl ◽  
Alexandre Djandji ◽  
Stephanie Morgan ◽  
Susan Whittier ◽  
...  
Keyword(s):  
Limit Of Detection ◽  
Point Of Care ◽  
Diagnostic Testing ◽  
Rna Extraction ◽  
Cost Effective ◽  
Clinical Samples ◽  
Nasopharyngeal Swab ◽  
Percentage Agreement ◽  
Testing Method ◽  
Viral Transport

AbstractThe COVID-19 pandemic has resulted in an urgent need for a rapid, point of care diagnostic testing that could be rapidly scaled on a worldwide level. We developed and tested a highly sensitive and robust assay based on reverse transcription loop mediated isothermal amplification (RT-LAMP) that uses readily available reagents and a simple heat block using contrived spike-in and actual clinical samples. RT-LAMP testing on RNA-spiked samples showed a limit of detection (LoD) of 2.5 copies/μl of viral transport media. RT-LAMP testing directly on clinical nasopharyngeal swab samples in viral transport media had an 85% positive percentage agreement (PPA) (17/20), and 100% negative percentage agreement (NPV) and delivered results in 30 min. Our optimized RT-LAMP based testing method is a scalable system that is sufficiently sensitive and robust to test for SARS-CoV-2 directly on clinical nasopharyngeal swab samples in viral transport media in 30 min at the point of care without the need for specialized or proprietary equipment or reagents. This cost-effective and efficient one-step testing method can be readily available for COVID-19 testing world-wide, especially in resource poor settings.

Sign in / Sign up

Export Citation Format

Share Document