Shear connection between precast concrete bridge segments built with thin-walled elements

2021 ◽  
Author(s):  
Tobias Huber ◽  
Stephan Fasching ◽  
Johann Kollegger
Keyword(s):  
Precast Concrete ◽  
Deformation Behaviour ◽  
Lateral Force ◽  
Test Results ◽  
Construction Time ◽  
Shear Connection ◽  
Force Transfer ◽  
Strength And Deformation ◽  
Thin Walled ◽  
Segmental Bridge

<p>Segmental bridge construction combines the advantages of prefabrication, for example the reduction of construction time and very high product quality, with those of common bridge erecting methods. Short precast segments are assembled and prestressed to form the complete superstructure. New methods divide these segments into prefabricated elements to create new lighter versions of the segments. For this to work, new joint types must be developed which can ensure the force transfer between the segments. In this paper, several methods, including a new concept for joining thin-walled pre-fabricated elements, are described. Push-off tests with a constant lateral force were carried out to assess the shear strength and deformation behaviour. The main parameters were the joint type (wet joints: plain, grooved, keyed; dry joints), the mortar type, and the level of lateral force. In this paper, the test results are presented and recalculations with a design code are shown.</p>

scholarly journals Semi-Precast Segmental Bridge Construction Method: Experimental Investigation on the Shear Transfer in Longitudinal and Transverse Direction

2021 ◽  
Vol 11 (12) ◽  
pp. 5502
Author(s):  
Stephan Johann Fasching ◽  
Tobias Huber ◽  
Michael Rath ◽  
Johann Kollegger
Keyword(s):  
Finite Element ◽  
Deformation Behaviour ◽  
Lateral Force ◽  
Concrete Bridges ◽  
Structural Behaviour ◽  
Element Analysis ◽  
Linear Finite Element ◽  
Non Linear ◽  
Thin Walled ◽  
The Stability

Large span concrete bridges with a box-shaped girder are usually built from prefabricated concrete segments or by in-situ casting of the concrete on a scaffolding system. Both technologies have their advantages and drawbacks. Recently a new approach to the construction of such bridges which combines the advantages of both existing solutions was proposed at the TU Wien. This method uses the standard precast segmental erection methods with their high construction speed, but divides the segments into easily transportable pre-fabricated thin-walled elements to create new, lighter versions of the segments. Following the installation of these lightweight segments, they are strengthened with additional concrete in their final position in the superstructure. This paper focuses on the transmission of shear forces during construction stages. Firstly, on the level of individual segments, where rigid cross-frames are necessary to guarantee the stability of the segments and secondly, on the level of a bridge girder built from such segments, where new joint types must be developed to ensure the force transfer between the segments. Different options for the formation of cross-frames as well as shear tests on double walls and concrete panels with steel girders are shown. In this experimental series, different shear transmitting elements were compared to each other and to calculations with non-linear finite element analysis, showing that all the investigated solutions are suitable for use in thin-walled bridge segments. Several methods, including a new concept for joining thin-walled pre-fabricated elements, are described for the joints between the segments. Push-off tests with a constant lateral force were carried out to assess the shear strength and deformation behaviour. The main parameters were the joint type (wet joints: plain, grooved, keyed; dry joints), the grout type, and the lateral force level. The test results are presented and the structural behaviour is further analysed using non-linear finite-element simulations.

Precast Concrete Segmental Bridge Piers under Ship Impact

2016 ◽  
Vol 106 (6) ◽  
pp. 683-690 ◽  
Author(s):  
Hai FANG ◽  
Lu ZHU ◽  
Francis T.K AU
Keyword(s):  
Precast Concrete ◽  
Bridge Piers ◽  
Segmental Bridge

scholarly journals Test and Numerical Model of Curved Steel–Concrete Composite Box Beams under Positive Moments

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2978
Author(s):  
Zhi-Min Liu ◽  
Xue-Jin Huo ◽  
Guang-Ming Wang ◽  
Wen-Yu Ji
Keyword(s):  
Finite Element ◽  
Static Loading ◽  
Composite Beams ◽  
Parameter Analysis ◽  
Outer Side ◽  
Finite Element Models ◽  
Test Results ◽  
Rotational Angle ◽  
Shear Connection ◽  
Box Beams

Compared with straight steel–concrete composite beams, curved composite beams exhibit more complicated mechanical behaviors under combined bending and torsion coupling. There are much fewer experimental studies on curved composite beams than those of straight composite beams. This study aimed to investigate the combined bending and torsion behavior of curved composite beams. This paper presents static loading tests of the full elastoplastic process of three curved composite box beams with various central angles and shear connection degrees. The test results showed that the specimens exhibited notable bending and torsion coupling force characteristics under static loading. The curvature and interface shear connection degree significantly affected the force behavior of the curved composite box beams. The specimens with weak shear connection degrees showed obvious interfacial longitudinal slip and transverse slip. Constraint distortion and torsion behavior caused the strain of the inner side of the structure to be higher than the strain of the outer side. The strain of the steel beam webs was approximately linear. In addition, fine finite element models of three curved composite box beams were established. The correctness and applicability of the finite element models were verified by comparing the test results and numerical calculation results for the load–displacement curve, load–rotational angle curve, load–interface slip curve, and cross-sectional strain distribution. Finite element modeling can be used as a reliable numerical tool for the large-scale parameter analysis of the elastic–plastic mechanical behavior of curved composite box beams.

Experimental and Numerical Investigation of Critical Buckle Load of Composite Specimens

2015 ◽  
Vol 732 ◽  
pp. 85-90
Author(s):  
Lukáš Bek ◽  
Radek Kottner ◽  
Jan Krystek ◽  
Tomáš Kroupa
Keyword(s):  
Static Analysis ◽  
Glass Fibre ◽  
Large Deformations ◽  
Bending Test ◽  
Test Results ◽  
Beam Test ◽  
Three Point Bending ◽  
Box Beams ◽  
Buckle Beam ◽  
Thin Walled

Different carbon and glass fibre strips were subjected to the double clamp buckle beam test. Furthermore, thin-walled glass fibre box-beams were subjected to the three-point bending test. Results of experiments were compared to different numerical simulations using buckling analysis or static analysis considering large deformations.

Investigation of the adhesion strength and deformation behaviour of in situ fabricated NbC coatings by scratch testing

2016 ◽  
Vol 299 ◽  
pp. 135-142 ◽  
Author(s):  
Xiaolong Cai ◽  
Yunhua Xu ◽  
Nana Zhao ◽  
Lisheng Zhong ◽  
Ziyuan Zhao ◽  
...  
Keyword(s):  
Adhesion Strength ◽  
Deformation Behaviour ◽  
Scratch Testing ◽  
Strength And Deformation

scholarly journals STUDY OF THE FIRE PERFORMANCE OF HYBRID STEEL-TIMBER CONNECTIONS WITH FULL-SCALE TESTS AND FINITE ELEMENT MODELLING

2016 ◽  
Author(s):  
Aaron O. Akotuah ◽  
Sabah G. Ali ◽  
Jeffrey Erochko ◽  
Xia Zhang ◽  
George V. Hadjisophocleous
Keyword(s):  
Finite Element ◽  
Load Ratio ◽  
Full Scale ◽  
Test Results ◽  
Structural Members ◽  
Fire Performance ◽  
Shear Connection ◽  
Timber Connections ◽  
Full Scale Tests ◽  
Connection Design

Connection design is critical in timber buildings since the connections tend to have lower strength than the structural members themselves and they tend to fail in a brittle manner. The effect of connection geometry on the fire performance of a hybrid steel-timber shear connection is investigated by full-scale testing. These tests were conducted by exposing the test specimens to the standard time-temperature curve defined by CAN/ULC-S101 (CAN/ULC-S101, 2007). Test results showed that the fire resistance of these connections depends on the load ratio, the type of connection and the relative exposure of the steel plate to fire. Finite element models of the connections under fire were constructed using ABAQUS/CAE and these were validated using the test results. These numerical model results correlate well with test results with ±8.32% variation.

scholarly journals Experiment and Design Method on Cold-Formed Thin-Walled Steel Lipped Channel Columns with Slotted Web Holes Under Axial Compression

2017 ◽  
Vol 11 (1) ◽  
pp. 244-257 ◽  
Author(s):  
Xingyou Yao
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Ultimate Strength ◽  
Test Results ◽  
Distortional Buckling ◽  
Steel Columns ◽  
Cold Formed Steel ◽  
Thin Walled ◽  
Shell Finite Element ◽  
The Web

Background: Cold-formed steel structural sections used in the walls of residential buildings and agricultural facilities are commonly C-shaped sections with web holes. These holes located in the web of sections can alter the elastic stiffness and the ultimate strength of a structural member. The objective of this paper is to study the buckling mode and load-carrying capacity of cold-formed thin-walled steel column with slotted web holes. Methods: Compression tests were conducted on 26 intermediate length columns with and without holes. The tested compressive members included four different kinds of holes. For each specimen, a shell finite element Eigen-buckling analysis and nonlinear analysis were also conducted. The influence of the slotted web hole on local and distortional buckling response had also been studied. The comparison on ultimate strength between test results and calculated results using Chinese cold-formed steel specification GB50018-2002, North American cold-formed steel specification AISI S100-2016, and nonlinear Finite Element method was made. Result: Test results showed that the distortional buckling occurred for intermediate columns with slotted holes and the ultimate strength of columns with holes was less than that of columns without holes. The ultimate strength of columns decreased with the increase in transverse width of hole in the cross-section of member. The Finite element analysis results showed that the web holes could influence on the elastic buckling stress of columns. The shell finite element could be used to model the buckling modes and analysis the ultimate strength of members with slotted web holes. The calculated ultimate strength shows that results predicted with AISI S100-2016 and analyzed using finite element method are close to test results. The calculated results using Chinese code are higher than the test results because Chinese code has no provision to calculate the ultimate strength of members with slotted web holes. Conclusion: The calculated method for cold-formed thin-walled steel columns with slotted web holes are proposed based on effective width method in Chinese code. The results calculated using the proposed method show good agreement with test results and can be used in engineering design for some specific cold-formed steel columns with slotted web holes studied in this paper.

scholarly journals Designing of minimum mass airframes under several loadings

2020 ◽  
Vol 19 (4) ◽  
pp. 14-29
Author(s):  
A. I. Danilin
Keyword(s):  
Suggested Method ◽  
Optimal Structure ◽  
Light Weight ◽  
Material Distribution ◽  
Minimum Mass ◽  
Force Transfer ◽  
Optimal Force ◽  
Wing Structure ◽  
Thin Walled

We discuss the features of optimal force transfer in a thin-walled structure and use them to develop a method for defining the distribution of material over the structure elements for minimizing its volume. The suggested method works with one or several external loadings and allows one to determine the optimal structure and to recognize the phenomenon of Razani in which a structure with unequal stresses due to several loadings is more light-weight than a fully- stressed one. Using the developed method, we solved the original Razani problem and applied it for the optimization of the wing structure of a novel hypersonic airplane. It is shown that the determined material distribution is 8.78% lighter than that in a conventionally fully-stressed structure.

Comparative Study on the Pseudo-Dynamic Testing of Semi-Rigid Connection of Steel Frames with or without Brace

2011 ◽  
Vol 194-196 ◽  
pp. 2001-2007
Author(s):  
Jia Lv ◽  
Qi Lin Zhang
Keyword(s):  
Dynamic Testing ◽  
Dynamic Test ◽  
Lateral Force ◽  
Steel Frame ◽  
Seismic Loads ◽  
Test Results ◽  
Shearing Force ◽  
Braced Frame ◽  
Rigid Connection ◽  
Steel Braced Frame

The horizontal stiffness of steel frame is relatively weak. So designers introduce brace system into steel frame to increase the horizontal stiffness. In order to guarantee the safety of the structure, we should imitate the performance of the structure under seismic loads. In this paper, the pseudo-dynamic test was conducted on the semi-rigid connection of steel frame and the semi-rigid connection of steel-braced frame. The test results show that the brace can increase the ductility of the structure, decrease the displacement of the top floor, decrease the interlayer displacement, and bear ground floor shearing-force. So the brace greatly impacts the performance of the structure. It has the ability of anti-earthquake and strong resistance ability of lateral force.

Sign in / Sign up

Export Citation Format

Share Document