scholarly journals SYNTHESISAND STUDY OF THE COMPLEXES OF: N-(3,4,5-TRIMETHOXY PHENYL)-N- BENZOYL THIOUREA (TMPBT) WITH A NUMBER OF TRANSITION METALS AND THEIR INDUSTRIAL AND MEDICAL IMPORTANCE

2020 ◽  
Vol 12 (2) ◽  
pp. 62-70
Author(s):  
أمير حسين حسن ◽  

This paper performance for preparation and identification of six new complexes of a number of transition metals Cr (lII), Mn (I1), Fe (l), Co (II), Ni (I1), Cu (Il) with: N - (3,4,5-Trimethoxy phenyl-N - benzoyl Thiourea (TMPBT) as a bidentet ligand. The prepared complexes have been characterized, identified on the basis of elemental analysis (C.H.N), atomic absorption, molar conductivity, molar-ratio ,pH effect study, I. Rand UV spectra studies. The complexes have the structural formula ML2X3 for Cr (III), Fe (III), and ML2X2 for Mn (II), Ni (II), and MLX2 for Co (Il) , Cu (Il).

2012 ◽  
Vol 9 (4) ◽  
pp. 608-615
Author(s):  
Baghdad Science Journal

Anew Schiff base (NaHL) has been prepared from the reaction between the salt of amino acid glycine with 2-hydroxy naphthaldehyde. By tridentate Schiff base of (ONO), donors were characterized by using U.V and spectrophotometer techniques. Complexes of Co(II) Ni(II) Cu(II) and Zn(II) ion with the ligand have been prepared, these complexes were identified by infrared, electronic spectral data, elemental analysis, magnetic moments, and molar conductivity measurements. It is concluded from the elemental analysis that all the complexes have (1:2) [metal:ligand] molar ratios, octahedral, with the exception to Zn(II) complex which have (1:1)[metal:ligand] molar ratio.


2020 ◽  
Vol 18 (4) ◽  
pp. 445-450
Author(s):  
S.Z. Ismayilova ◽  

Condensation of p-phenylenediamine and glyoxal at a molar ratio of 1: 1 made it possible to synthesize a new polyimine with chelating ability. The complexation of this polyimine with transition metals was studied and the composition and structure of the complexes obtained were explored by means of IR, electron spectroscopy, EPR, derivatography, and elemental analysis.


2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
Lakhdar Sibous ◽  
Embarek Bentouhami ◽  
Mustayeen Ahmed Khan

4,4′-Diaminobiphenyl reacts with 2,4-pentanedione in absolute ethanol in a molar ratio 1 : 2 to form mainly the product of [1 + 2] condensation, 4,4′-(biphenyl-4,4′-diyldinitrilo)dipentan-2-one (H2L). The Schiff base was used as tetradentate chelating ligand to coordinate CoII and NiII chlorides leading to complexes where the ratio of metal ligand was found to be 2 : 1 or 2 : 2. All the synthesized products were characterized by elemental analysis, infrared, electronic, and mass spectroscopy, 1H NMR, and DSC. The electrochemical behaviour of the ligand and its complexes in DMF is also investigated.


2010 ◽  
Vol 93-94 ◽  
pp. 13-16
Author(s):  
Khalil J. Asali

Reactions of the labile complex (Me3tach)M(CO)3 (Me3tach = 1,3,5-trimethyl-1,3,5-triazacyclohexane; M = W, Mo) with bis(phenylthio)alkanes ( = PhS(CH2)nSPh), (2:3 molar ratio) in CH2Cl2 as solvent (at 35 oC M = W, 0 oC M = Mo) afforded in good yields bimetallic tricarbonyl complexes triply- bridged by bis(phenylthio)alkanes of the type [M(CO)3]2(μ-PhS-(CH2)n-SPh)3 [n = 3 (a), 4 (b), 5 (c), 6 (d); M = W (1), Mo (2)]. These new triply-bridged complexes were characterized by 1H NMR, FT-IR and elemental analysis. Additionally, it has been observed that the thermodynamic stability of some of these new complexes in chlorinated hydrocarbons depends mainly on the nature of the metal center and varies in the order W >> Mo.


2021 ◽  
pp. 88-96
Author(s):  
D. Muktaly ◽  
◽  
Zh.K. Myltykbaeva ◽  
M.B. Smaiyl ◽  
◽  
...  

Continuous growth in consumption of oil in the world, as well as ever-increasing quality requirements stimulate the search for new scientific and technological solutions to directionally affect the characteristics of petroleum products, including their chemical composition. The advantages of oxidative desulfurization before hydrotreating are the absence of the need to use hydrogen, as well as small capital and energy costs, since the method does not require high temperatures and pressures. The purpose of this work was to study the oxidation process of diesel fuel and to search for the optimal mode of oxidative desulfurization of diesel fuel in the presence of transition metals salts with the addition of mineral acids. The object of the study is a straight-run diesel fraction of the Pavlodar Petrochemical Plant with boiling temperatures of 180-350°C. The oxidation process was carried out with hydrogen peroxide in the presence of salts of the transition metals molybdenum, vanadium and tungsten. The article defined the basic physico-chemical characteristics of straight-run and desulfurized diesel fractions. The optimal catalyst (Na2MoO4) was selected at a molar ratio of metal to sulfur of 1:100 for the oxidation process of straight-run diesel fractions. As a result of oxidative desulfurization of diesel fuel in the presence of sodium molybdenum perox complexes, the total sulfur content decreased by 42.9%, and with the addition of sulfuric acid by 56.5%. An increase in the cetane index from 56.3 to 58.6 was revealed in the presence of sodium molybdate with the addition of sulfuric acid.


Author(s):  
Xi Shi Tai ◽  
Peng Fei Li ◽  
Li Li Liu

Metal-organic complex hybrid materials constructed from carboxylate ligands and hydrazone ligands have exhibited potential application in many fields. In order to enrich the applications of the metai-organic complex materials, a new hydrazone ligand contains carboxylate group, 2-carboxybenzaldehyde-p-toluenesulfonyl hydrazone (L1), and its Cu(II) complex (C2), have been prepared. The structure of L1 was determined by elemental analysis, IR spectra and single crystal X-ray diffraction, and the composition of Cu(II) complex (C2) has also been determined by elemental analysis, IR and UV spectra. The catalytic activity for A3 coupling reaction of benzaldehyde, piperidine, and phenylacetylene has been investigated. The results show that Cu(II) complex displays a 100 % selectivity to the product of propargylamine during A3 coupling reaction and benzaldehyde conversions were 95.3, 94.2, and 93.4 % at 120 °C for 12 h in the first, second, and third reaction cycles, respectively.  Copyright © 2018 BCREC Group. All rights reservedReceived: 16th March 2017; Revised: 17th July 2017; Accepted: 18th July 2017; Available online: 22nd January 2018; Published regularly: 2nd April 2018How to Cite: Tai, X.S., Li, P.F., Liu, L.L. (2018). Preparation, Characterization, and Catalytic Property of a Cu(II) Complex with 2-Carboxybenzaldehyde-p-Toluenesulfonyl Hydrazone Ligand. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (1): 7-13 (doi:10.9767/bcrec.13.1.1012.7-13) 


Crystals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 982
Author(s):  
Devaraj Pandiarajan ◽  
Thomas Fox ◽  
Bernhard Spingler

The coordination chemistry of butane-2,3-dione bis (2′-pyridylhydrazone) towards the divalent first-row transition metals zinc and iron has been explored. Depending upon the conditions, the ligand in the six complexes was found to be either neutral, mono, or doubly deprotonated. The zinc(II) and iron(II) complexes were fully characterized by elemental analysis, mass spectrometry, and X-ray diffraction methods.


2011 ◽  
Vol 8 (4) ◽  
pp. 1005-1011
Author(s):  
Baghdad Science Journal

Many complexes of 3,5-dimethyl-1H-pyrazol-1-yl phenyl methanone with Cr(III), Co(II), Ni(II), Cu(II) and Cd(II) were synthesized and characterized by FT-IR, UV/visible spectra, elemental analysis, room temperature magnetic susceptibility and molar conductivity. Cd(II) complex was expected to have tetrahedral structure while all the other complexes were expected to have an octahedral structure.


2013 ◽  
Vol 10 (3) ◽  
pp. 597-606
Author(s):  
Baghdad Science Journal

New (pentulose-?-lactone-2,3-enedibenzoate barbituric acid) (L) have been synthesized by reaction of (5-C-dimethyl malonyl-pentulose-?-lactone-2,3-enedibenzoate) with urea in alkaline media (sodium methoxide). (Ca+2, Co+2, Ni+2, Cu+2, Zn+2, Cd+2 and Hg+2) complexes of (pentulose-?-lactone-2,3-enedibenzoate barbituric acid) (L) have been prepared and characterized by (1H and 13CNMR), FTIR, (U.V-Vis) spectroscopy, Atomic absorption spectrophotometer (A.A.S), Molar conductivity measurements and Magnetic moment measurements, and the following general formula has been given for the prepared complexes [MLCl2(H2O)].XH2O, where M = (Ca+2, Co+2, Ni+2, Cu+2, Zn+2, Cd+2, Hg+2), X = five molecules with (Cd+2) complex, L = (pentulose-?-lactone-2,3-enedibenzoate barbituric acid).


2020 ◽  
Vol 11 (7) ◽  
pp. 1277-1291
Author(s):  
Tsegaye Bojago

The purpose of the current study is to analyze the concentration levels of selected trace metals: Ca, Cu, Fe, K and Zn in medicinal plant Moringa stenopetala grown in SNNPR, Ethiopia. A wet digestion procedure is used. Thus, the result showed that the concentrations of Ca, Cu, Fe, K and Zn in Moringa stenopetala grown in Gamo Gofa (Arbaminch) were;2.80±0.36, 0.866±0.134, 7.98±1.23, 3.02±0.63 and 84±0.92 mg/Kg, in Wolaita 3.28±0.28, 0.94±0.16, 7.13±1.32, 7.13±1.32 and 0.61±0.11mg/Kg and in Konso were; 2.97±0.67, 0.77±0.098, 6.79±0.73, 2.39±0.23 and 0.37±0.006mg/Kg respectively.


Sign in / Sign up

Export Citation Format

Share Document