scholarly journals EXPERIMENTAL STUDY OF SOLAR AIR HEATER USING OF PHOTOVOLTAIC CELLS

2020 ◽  
Vol 4 (12) ◽  
pp. 103-106
Author(s):  
Deeksha Vishwakarma ◽  
Jyoti Kale
Keyword(s):  
Experimental Study ◽  
Forced Convection ◽  
Flow Rate ◽  
Storage System ◽  
Flat Glass ◽  
Photovoltaic Cells ◽  
Solar Air Heater ◽  
Outlet Temperature ◽  
Air Flow Rate ◽  
Air Heater

In this paper, we are studying about solar air heater. The solar air heater are consisting the several component such as flat glass, collector, D.C. fan, photovoltaic cells and electrical storage system. In this study we are achieving the various type of outlet temperature with the help of D.C. fan and various Mass air flow rate using of simple absorber trays forced convection.

scholarly journals Thermal Evaluation of a Double-Pass Unglazed Solar Air Heater with Perforated Plate and Wire Mesh Layers

2020 ◽  
Vol 12 (9) ◽  
pp. 3619
Author(s):  
Afaq Jasim Mahmood
Keyword(s):  
Flow Rate ◽  
Thermal Efficiency ◽  
Air Flow ◽  
Wire Mesh ◽  
Inlet Temperature ◽  
Solar Air Heater ◽  
Outlet Temperature ◽  
Air Flow Rate ◽  
Double Pass ◽  
Air Heater

In this study, an experimental outdoor investigation of the thermal efficiency and outlet air temperature was conducted on an unglazed, double-pass, solar air heater with a perforated absorber plate and packing wire mesh layers as a supplemental absorbent area. This was done to observe their effects on the thermal performance of the solar air heater. The double-pass collector was constructed with a bed height of 0.05 m, and a collection area of 1.5 m2. The height of the upper channel was fixed at 0.015 m to improve the thermal efficiency, and the outlet temperature at air flow rates between 0.003 and 0.018 kg/s. The collector was mounted with a slope of 42° facing south, to maximize the intensity of solar irradiance during winter. The effects of the air flow rate, ambient temperature, inlet temperature, outlet temperature, and solar intensity were experimentally investigated. The results showed that thermal efficiency could be improved by increasing the air flow rate, where the highest thermal efficiency achieved was 86% at 0.018 kg/s. However, the temperature difference was increased to a maximum value of 38.6 °C, when the air flow rate was decreased to 0.003 kg/s. Furthermore, the results demonstrated a significant improvement in the thermal efficiency and outlet temperature; and when compared with previous research, the experimental results and the predictions for the outlet temperature using the theoretical model agreed.

Experimental Investigation on the Heat Transfer of a Portable Forced-Convection Solar Air Heater

2010 ◽  
Author(s):  
Mohammad Fakoor Pakdaman ◽  
Pejman Zohorian Izadi ◽  
Mohammad Javadinia Azari ◽  
Amir Lashkari
Keyword(s):  
Forced Convection ◽  
Air Flow ◽  
Bottom Plate ◽  
Solar Air Heater ◽  
Air Flow Rate ◽  
Flow Conditions ◽  
Maximum Enhancement ◽  
Air Heater ◽  
Weather Changes ◽  
Plate Absorber

A cross-corrugated portable forced-convection solar air heater has been designed, fabricated, and developed. A wavelike bottom plate has been positioned crosswise to the air flow while rectangular baffles have been attached to the flat-plate absorber. The relative corrugation height, (e/Dh) ranges between 0.24 and 0.4, and relative baffles distance (l/L) varies between 0.21 and 0.48. The air flow rate in the heater duct has been varied in the range of 0.001 kgs−1 to 0.01kgs−1 (Reynolds number ranges from 350 to 3500), while other thermal specifications such as inlet, outlet, and plate temperatures have varied due to weather changes. Results of this study have been compared with those related to smooth ducts and other literatures, and the maximum enhancement in Nusselt number is observed to be approximately five times of that of the smooth duct under similar flow conditions. Finally, thermal efficiency of the device for different case studies has been determined and compared with other researches.

scholarly journals Numerical Simulation of Solar Air Heater using Paraffin Wax-Aluminum Compound as Phase Changing Material

2021 ◽  
Vol 3 (2) ◽  
pp. 49-55
Author(s):  
Atul Kumar ◽  
Prabhakar Bhandari ◽  
K.S. Rawat
Keyword(s):  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Paraffin Wax ◽  
Solar Air Heater ◽  
Outlet Temperature ◽  
Freezing Time ◽  
Aluminum Compound ◽  
Air Heater ◽  
Aluminium Powder

This paper presents a theoretical investigation of solar air heater using phase change material (PCM). PCM used in present configuration is homogenous mixture of paraffin wax with Aluminium powder. The purpose of using Aluminium powder with paraffin wax is to increase the thermal conductivity. PCM mixtures are encapsulated in cylinders and are used as solar absorbers. Using MATLAB program, the effect of different parameters is studied. It has been observed that with increase in mass flow rate, air outlet temperature decreases and freezing time of cylinder decreases. However, at constant mass flow rate, with increase in cylinder radius, air temperature decreases and while freezing time increase sharply. The different parameters have  to be chosen such that performance of solar air heater can be optimized.

scholarly journals Energy analysis of a solar air heater with an absorber plate made of porous material

2021 ◽  
Vol 25 (Spec. issue 2) ◽  
pp. 333-337
Author(s):  
Filiz Ozgen ◽  
Ayse Dayan
Keyword(s):  
Flow Rate ◽  
Energy Analysis ◽  
Inlet Temperature ◽  
Type I ◽  
Solar Air Heater ◽  
Outlet Temperature ◽  
Absorber Plate ◽  
Plate Temperature ◽  
Air Heater ◽  
Plate Type

In this study, the energy analysis of a solar air heater with an absorber plate made of different obstacles was made. Absorber plate of the solar air heater was created with porous steel wool. Three different absorber plates were used for the experimental study. Complex plate (Type I) was used as the first type of absorber plate, less complex plate (Type II) as the second type absorber plate, and flat plate (Type III) the third type absorber plate. On these plates, which are manufactured as three different absorber plates, steel wools are placed in a complex and less complex way. One absorber plate was left empty. In the experiments, the mass-flow rate of the air passing through the air passage channels was taken as 0.05 kg/s and 0.025 kg/s, and the optimum flow rate was found as 0.05 kg/s. In order to make heater efficiency calculations, heater inlet temperature, outlet temperature, absorber plate temperature, ambient temperature and solar radiation values were measured. Efficiency values for different absorber plate were found between 23% and 74%.

Design and Development of V-Grooved Natural Convection Solar Air Heater for Odisha

2015 ◽  
Vol 813-814 ◽  
pp. 668-673
Author(s):  
D.V.N. Lakshmi ◽  
S.S. Mohapatra ◽  
Anbalgan Satheesh ◽  
Harish Das
Keyword(s):  
Experimental Study ◽  
Natural Convection ◽  
Mass Flow Rate ◽  
Air Temperature ◽  
Flow Rate ◽  
Meteorological Conditions ◽  
Second Law ◽  
Solar Air Heater ◽  
Air Heater ◽  
Solar Heater

This paper presents an experimental study of natural convection V-grooved solar heater. Based on the experimental study, the first law and second law efficiencies and entropy generation have been calculated considering the available radiation under the meteorological conditions of Bhubaneswar, Odisha, India. Experiments were conducted during the month of November 2014 to March, 2015 for studying the performance characteristics of the solar air heater. The results obtained are quite significant with respect to outlet air temperature as compared to other solar heaters. The maximum air heater efficiency was found to be 16.91%, calculated at a mass flow rate of 3.55 gm/s of air and the second law efficiency was 6.72%.

Experimental Study of a Solar Air Heater With a New Arrangement of Transverse Longitudinal Baffles

2017 ◽  
Vol 139 (3) ◽  
Author(s):  
Afaq Jasim Mahmood
Keyword(s):  
Heat Transfer ◽  
Flow Rate ◽  
Thermal Efficiency ◽  
Air Flow ◽  
Maximum Temperature ◽  
Maximum Efficiency ◽  
Solar Air Heater ◽  
Air Flow Rate ◽  
Double Pass ◽  
Air Heater

This study presents a new design for improving the convection heat transfer coefficients of double-pass solar air heater. Three cases were described by using a different number of transverse baffles (three, five, and seven) in the lower channel of the collectors; steel mesh sheets were also used to enlarge the heat transfer area. All collectors have a space of 25 mm between its glass covers and a 50 mm depth of air channel. Furthermore, this work examined the effect of air flow rate and baffles number on device's thermal efficiency and outlet temperature. The experimental results indicate raises in the thermal efficiency as the air flow rate goes from 0.011 kg/s to 0.038 kg/s. A maximum efficiency of 68% was obtained from the case of seven baffles at the air flow rate of 0.038 kg/s. Moreover, the difference between collector's inlet and outlet temperatures, ΔT, indicated an inverse relationship with air flow rate. Thus, the results show ΔT increases as the air flow rate reduced. The maximum temperature difference recorded was 54 °C, which achieved using seven baffled solar air heater at 0.011 kg/s air flow rate in the middle of the day. It has also been found that thermal efficiency of double-pass solar air heater is greater than single-pass solar air heater, using same air flow rate and number of baffles. Finally, the pressure drop associated with increasing the number of baffles and air flow rate was deliberated.

Investigation of the Thermal Performances of Flat, Finned, and v-Corrugated Plate Solar Air Heaters

2016 ◽  
Vol 138 (5) ◽  
Author(s):  
A. E. Kabeel ◽  
A. Khalil ◽  
S. M. Shalaby ◽  
M. E. Zayed
Keyword(s):  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Thermal Efficiency ◽  
Convective Heat Transfer Coefficient ◽  
Operating Conditions ◽  
Experimental Results ◽  
Solar Air Heater ◽  
Outlet Temperature ◽  
Air Heater

In this research, the thermal performances of flat, finned, and v-corrugated plate solar air heaters were investigated experimentally. A solar air heater with single glass cover, single pass was designed and tested under prevailing weather conditions of Tanta city (30°43′ N, 31° E), Egypt. The solar air heater was designed to be easy to replace the absorber plate from one to another one. Comparisons between the temperature difference of air across the heater and thermal efficiencies of the flat, finned, and v-corrugated plate solar air heaters were presented. The effect of change in the mass flow rate of air on the outlet air temperature and the thermal efficiency of the heater were also studied when the mass flow rates were 0.062, 0.028, and 0.009 kg/s. The experimental results showed that the maximum value of outlet temperature of the v-corrugated plate solar air heater was 5 and 3.5 °C more than that of flat and finned plates when the mass flow rate was 0.062 kg/s, respectively. And, it increased to be 8 and 5.5 C when the mass flow rate was 0.009 kg/s. It is also indicated that the thermal efficiency of the v-corrugated solar air heater is 8–14.5% and 6–10.5% higher than that of the flat and finned plate heaters, respectively, when the mass flow rate was 0.062 kg/s under the considered configurations and operating conditions. The experimental results also indicated that the convective heat transfer coefficient of the v-corrugated heater reached up to 1.64 and 1.36 times than that of the flat and finned heaters, respectively, when the flow rate was 0.062 kg/s.

scholarly journals Experimental Investigation on Improvement of Wet Cooling Tower Efficiency with Diverse Packing Compaction Using ANN-PSO Algorithm

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 167
Author(s):  
Hasan Alimoradi ◽  
Madjid Soltani ◽  
Pooriya Shahali ◽  
Farshad Moradi Kashkooli ◽  
Razieh Larizadeh ◽  
...  
Keyword(s):  
Neural Network ◽  
Water Temperature ◽  
Water Flow ◽  
Flow Rate ◽  
Cooling Tower ◽  
Air Flow ◽  
Water Flow Rate ◽  
Pso Algorithm ◽  
Outlet Temperature ◽  
Air Flow Rate

In this study, a numerical and empirical scheme for increasing cooling tower performance is developed by combining the particle swarm optimization (PSO) algorithm with a neural network and considering the packing’s compaction as an effective factor for higher accuracies. An experimental setup is used to analyze the effects of packing compaction on the performance. The neural network is optimized by the PSO algorithm in order to predict the precise temperature difference, efficiency, and outlet temperature, which are functions of air flow rate, water flow rate, inlet water temperature, inlet air temperature, inlet air relative humidity, and packing compaction. The effects of water flow rate, air flow rate, inlet water temperature, and packing compaction on the performance are examined. A new empirical model for the cooling tower performance and efficiency is also developed. Finally, the optimized performance conditions of the cooling tower are obtained by the presented correlations. The results reveal that cooling tower efficiency is increased by increasing the air flow rate, water flow rate, and packing compaction.

Thermo-hydraulic and exergetic performance of a cost-effective solar air heater: CFD and experimental study

2022 ◽  
Vol 184 ◽  
pp. 627-641
Author(s):  
Kottayat Nidhul ◽  
Ajay Kumar Yadav ◽  
S. Anish ◽  
U.C. Arunachala
Keyword(s):  
Experimental Study ◽  
Cost Effective ◽  
Solar Air Heater ◽  
Air Heater
Sign in / Sign up

Export Citation Format

Share Document