scholarly journals Evaluation of Malathion Pesticide Removal Efficiency by g-C3N4/ Fe3O4/Ag Nanocomposites from Aqueous Solutions in the Presence of UV Irradiation

2020 ◽  
Vol 7 (3) ◽  
pp. 261-279
Author(s):  
Ali Esrafili ◽  
Soudabeh Ghodsi ◽  
Roshanak Rezaei Kalantary ◽  
Mitra Gholami ◽  
◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Removal Efficiency ◽  
Uv Irradiation ◽  
Pesticide Removal

scholarly journals Effect of Praestol as a Coagulant-Aid to Improve Coagulation-Flocculation in Dye containing Wastewaters

2015 ◽  
Vol 18 (1) ◽  
pp. 38-46 ◽  
Keyword(s):  
Ionic Strength ◽  
Aqueous Solutions ◽  
Removal Efficiency ◽  
Dye Removal ◽  
Settling Time ◽  
Solution Ph ◽  
Polyaluminum Chloride ◽  
Flocculation Process ◽  
Flocculation Time

<div> <p>This study was conducted to investigate the effect of praestol, as a coagulant-aid, to improve coagulation-flocculation process in the removal of disperse red 60 from aqueous solutions. The effect of various parameters including coagulants dose (10-1000 mg l<sup>-1</sup>), praestol dose (0-1000 mg l<sup>-1</sup>), solution pH (3-11), initial dye concentration (100-500 mg l<sup>-1</sup>), flocculation speed (30-60 rpm), flocculation time (15-30 min), settling time (5-60 min) and ionic strength (0-6 mg l<sup>-1</sup>) was evaluated on the dye removal. The dye removal efficiency was substantially increased by using praestol in the concentration of 80 mg l<sup>-1 </sup>and 400 mg l<sup>-1 </sup>for coagulation with alum and polyaluminum chloride (PACl), respectively. The maximum dye removal by alum coupled with praestol (Al-P) and PACl coupled with praestol (PA-P) was found to be 97.8% and 98.7%, respectively that were occurred at pH 7. The results showed that the application of PA-P or Al-P can be effectively used to remove disperse red 60 (DR 60) in aqueous solutions.</p> </div> <p>&nbsp;</p>

scholarly journals Aqueous ozone solutions for pesticide removal from potatoes

2016 ◽  
Vol 22 (8) ◽  
pp. 752-758 ◽  
Author(s):  
Fernanda F Heleno ◽  
Maria Eliana LR de Queiroz ◽  
Lêda RA Faroni ◽  
Antônio A Neves ◽  
André F de Oliveira ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Human Health ◽  
Pesticide Residues ◽  
Pure Water ◽  
Pesticide Analysis ◽  
Quantification Limit ◽  
Pesticide Removal ◽  
High Consumption ◽  
Potential Impact

The presence of pesticide residues in potatoes is of concern because of the potential impact to human health due to the high consumption of this vegetable. In this study, aqueous solutions with and without ozone saturation as postharvest wash treatment at pH 4.0, 7.0, and 9.0 were tested to remove chlorothalonil from potatoes. The method used for pesticide analysis has been validated, presenting recovery values of 94–103%, with variations in the repeatability coefficients of ≤10.6%, and a quantification limit of 0.05 mg kg−1. Regardless of pH, treatment with aqueous ozone solutions removed 70–76% of the pesticide present in the potato. In the no-ozone treatments, the percentage average removal of chlorothalonil residues in potatoes was only 36%. Over 24 days of storage, the quality of potatoes washed with aqueous ozone solutions was not significantly different from those washed with pure water.

Preparation and Application of Electrospinning Membranes of Thermoplastic Carboxymethyl Cellulose/PLA for Removal of Cu2+ from Aqueous Solutions

2012 ◽  
Vol 724 ◽  
pp. 61-64
Author(s):  
Ying Li ◽  
Xiao Yan Lin ◽  
Zhe Chen ◽  
Xue Guang Luo ◽  
Wei Li Zuo
Keyword(s):  
Tensile Strength ◽  
Aqueous Solutions ◽  
Removal Efficiency ◽  
Composite Membrane ◽  
Carboxymethyl Cellulose ◽  
Contact Time ◽  
Electrospinning Process ◽  
Cross Linking ◽  
Initial Concentration ◽  
The Cross

A composite membrane of thermoplastic carboxymethyl cellulose (TCMC) /PLA was prepared by electrospinning process, and crossliked by epichlorohydrin solution at different temperature. The cross-linking temperature was optimized by characterizing the morphology and tensile strength of the film. The optimal cross-linking temperature was 50°C. A composite membrane was used to remove Cu2+ from aqueous solutions, and the effects of initial concentration of Cu2+ and contact time on the removal efficiency of Cu2+ were investigated. The removal efficiency of Cu2+ was 13.78%, at the initial concentration of 40 mg·L-1 and contact time of 30s.

scholarly journals Molybdenum Trioxide: Efficient Nanosorbent for Removal of Methylene Blue Dye from Aqueous Solutions

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2295 ◽  
Author(s):  
Souad Rakass ◽  
Hicham Oudghiri Hassani ◽  
Mostafa Abboudi ◽  
Fethi Kooli ◽  
Ahmed Mohmoud ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Aqueous Solutions ◽  
Removal Efficiency ◽  
Molybdenum Trioxide ◽  
Second Order ◽  
Blue Dye ◽  
Order Kinetic ◽  
Methylene Blue Dye ◽  
Removal Capacity ◽  
Pseudo Second Order

Nano Molybdenum trioxide (α-MoO3) was synthesized in an easy and efficient approach. The removal of methylene blue (MB) in aqueous solutions was studied using this material. The effects of various experimental parameters, for example contact time, pH, temperature and initial MB concentration on removal capacity were explored. The removal of MB was significantly affected by pH and temperature and higher values resulted in increase of removal capacity of MB. The removal efficiency of Methylene blue was 100% at pH = 11 for initial dye concentrations lower than 150 ppm, with a maximum removal capacity of 152 mg/g of MB as gathered from Langmuir model. By comparing the kinetic models (pseudo first-order, pseudo second-order and intraparticle diffusion model) at various conditions, it has been found that the pseudo second-order kinetic model correlates with the experimental data well. The thermodynamic study indicated that the removal was endothermic, spontaneous and favorable. The thermal regeneration studies indicated that the removal efficiency (99%) was maintained after four cycles of use. Fourier Transform Infrared (FTIR) and Scanning Electron Microscopy (SEM) confirmed the presence of the MB dye on the α-MoO3 nanoparticles after adsorption and regeneration. The α-MoO3 nanosorbent showed excellent removal efficiency before and after regeneration, suggesting that it can be used as a promising adsorbent for removing Methylene blue dye from wastewater.

scholarly journals Removal of Cr(VI) from Aqueous Environments Using Micelle-Clay Adsorption

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Mohannad Qurie ◽  
Mustafa Khamis ◽  
Adnan Manassra ◽  
Ibrahim Ayyad ◽  
Shlomo Nir ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Removal Efficiency ◽  
Continuous Flow ◽  
Contact Time ◽  
Langmuir Adsorption Isotherm ◽  
Optimal Conditions ◽  
Batch Experiments ◽  
Langmuir Adsorption ◽  
Ph Values ◽  
Aqueous Environments

Removal of Cr(VI) from aqueous solutions under different conditions was investigated using either clay (montmorillonite) or micelle-clay complex, the last obtained by adsorbing critical micelle concentration of octadecyltrimethylammonium ions onto montmorillonite. Batch experiments showed the effects of contact time, adsorbent dosage, and pH on the removal efficiency of Cr(VI) from aqueous solutions. Langmuir adsorption isotherm fitted the experimental data giving significant results. Filtration experiments using columns filled with micelle-clay complex mixed with sand were performed to assess Cr(VI) removal efficiency under continuous flow at different pH values. The micelle-clay complex used in this study was capable of removing Cr(VI) from aqueous solutions without any prior acidification of the sample. Results demonstrated that the removal effectiveness reached nearly 100% when using optimal conditions for both batch and continuous flow techniques.

Sign in / Sign up

Export Citation Format

Share Document