scholarly journals The Research on Evaluation of Areal Sweep Efficiency in Low Permeability Reservoir with Streamline Numerical Simulation Method

Author(s):  
Renyi Cao ◽  
Yanbin Zhou ◽  
Qi Xiong
2013 ◽  
Vol 734-737 ◽  
pp. 1415-1419
Author(s):  
Zhen Yu Liu ◽  
Tian Tian Cai ◽  
Hu Zhen Wang ◽  
Cheng Yu Zhang

There is an increasing focus on the effective methods to develop low-permeability reservoirs, especially for ultra-low permeability reservoirs. It is hard to achieve the expected stimulation effect only on the traditional single fracturing, because of the poor supply ability from the matrix to fracture in low-permeability reservoirs. Volume stimulating to reservoir, achieving short distance from matrix to fracture because of producing fracture network. So the volume fracturing technology proposed for increasing oil or gas production, this technology is suitable for low porosity and low permeability reservoir. The conventional simulation method can't describe the complex fracture network accurately,but this paper established hydraulic fracturing complex fracture model based on the finite element numerical simulation method , making the simulated complex fracture more close to the real description,it can accurately describe the flow state in the reservoir and cracks.It has an important reference value to the low permeability reservoirs.


2017 ◽  
Vol 322 ◽  
pp. 301-312 ◽  
Author(s):  
Susumu Yamashita ◽  
Takuya Ina ◽  
Yasuhiro Idomura ◽  
Hiroyuki Yoshida

2012 ◽  
Vol 229-231 ◽  
pp. 55-58
Author(s):  
Jun Fan

To obtain the know-how of the deficiency for the filling capability, taking Ti75 alloy as the research object, at the same height of reducing, strain rates during forming as the control objective, the finite element numerical simulation method was used to simulate the hot compression with DEFORM-3D, analyzing the effect of the strain rates on the distribution of strain and stress.


2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Zhengzhi Wang ◽  
Chunling Zhu

In view of the rotor icing problems, the influence of centrifugal force on rotor blade icing is investigated. A numerical simulation method of three-dimensional rotor blade icing is presented. Body-fitted grids around the rotor blade are generated using overlapping grid technology and rotor flow field characteristics are obtained by solving N-S equations. According to Eulerian two-phase flow, the droplet trajectories are calculated and droplet impingement characteristics are obtained. The mass and energy conservation equations of ice accretion model are established and a new calculation method of runback water mass based on shear stress and centrifugal force is proposed to simulate water flow and ice shape. The calculation results are compared with available experimental results in order to verify the correctness of the numerical simulation method. The influence of centrifugal force on rotor icing is calculated. The results show that the flow direction and distribution of liquid water on rotor surfaces change under the action of centrifugal force, which lead to the increasing of icing at the stagnation point and the decreasing of icing on both frozen limitations.


Sign in / Sign up

Export Citation Format

Share Document