scholarly journals Effect of π-conjugated molecules on electronics properties of benzene-diamine derivatives

2021 ◽  
Vol 19 (50) ◽  
pp. 70-76
Author(s):  
Mohsin Al-Khaykanee ◽  
Ali Al-Jawdahb
Keyword(s):  
Band Gap ◽  
Density Functional ◽  
Conjugated Molecules ◽  
Functional Theory ◽  
Pi Conjugated ◽  
Phenyl Rings ◽  
Mechanical Approach ◽  
Quantum Mechanical Approach ◽  
Chemical Groups ◽  
Theoretical Results

The present work shows a theoretical results that have been used the functional Hybrid of three parameters Lee-Yang-Parr (B3LYP) of the quantum mechanical approach for density functional theory with (Spanish Initiative for Electronic Simulations with Thousands of Atoms) SIESTA code. All calculations were carried out employing the used method at the Gaussian 09 package of programs. It was reported the main point for research on dominance of the bandgap of elongated pi-conjugated molecules by using different chemical groups replacing hydrogen atom in the most molecules that used in this work. The side groups creates another factor that controls the value of the band gap. The dihedral angle between the two phenyl rings plays more important role in controlling the band gap in these molecules.

scholarly journals Simultaneous Suppression of pi- and sigma- Transmission in pi-Conjugated Molecules

2020 ◽  
Author(s):  
Marc Hamilton Garner ◽  
Gemma C. Solomon
Keyword(s):  
Density Functional ◽  
Structural Changes ◽  
Twist Angle ◽  
Dielectric Materials ◽  
Methyl Groups ◽  
Conjugated Molecules ◽  
Functional Theory ◽  
Pi Conjugated ◽  
Phenyl Rings ◽  
Open Question

<div><div><div><p>Molecular dielectric materials require ostensibly conflicting requirements of high polarizability and low conductivity. As previous efforts towards molecular insulators focused on saturated molecules, it remains an open question whether pi- and sigma-transport can be simultaneously suppressed in conjugated systems. Here, we demonstrate that there are conjugated molecules where the sigma-transmission is suppressed by destructive sigma-interference, while the pi-transmission can be suppressed by a localized disruption of conjugation. Using density functional theory, we study the Landauer transmission and ballistic current density, which allow us to determine how the transmission is affected by various structural changes in the molecule. We find that in para-linked oligophenyl rings the sigma-transmission can be suppressed by changing the remaining hydrogens to methyl groups due to the inherent gauche-like structure of the carbon backbone within a benzene ring, similar to what was previously seen in saturated systems. At the same time, the methyl groups fulfil a dual purpose as they modulate the twist angle between neighboring phenyl rings. When neighboring rings are orthogonal to each other, the transmission through both pi- and sigma-systems is effectively suppressed. Alternatively, breaking conjugation in a single phenyl ring by saturating two carbons atoms with two methyl substituents on each carbon, results in suppressed pi- and sigma-transport independent of dihedral angle. These two strategies demonstrate that methyl-substituted oligophenyls are promising candidates for the development of molecular dielectric materials.</p></div></div></div>

Suppression of the Sigma-Transmission by Destructive Quantum Interference in Pi-Conjugated Molecules

2020 ◽  
Author(s):  
Marc Hamilton Garner ◽  
Gemma C. Solomon
Keyword(s):  
Quantum Interference ◽  
Density Functional ◽  
Structural Changes ◽  
Dielectric Materials ◽  
Conjugated Molecules ◽  
Functional Theory ◽  
Conjugated Systems ◽  
Pi Conjugated ◽  
Phenyl Rings ◽  
Open Question

<div><div><div><p>Molecular dielectric materials require ostensibly conflicting requirements of high polarizability and low conductivity. As previous efforts towards molecular insulators focused on saturated molecules, where the polarizability will be generally less than conjugated molecules, it remains an open question whether electron transport can be comprehensively suppressed in conjugated systems. Here, we demonstrate that the s-transmission in conjugated oligophenyl</p><p>systems can be suppressed by destructive sigma-interference. Using density functional theory, we study the Landauer transmission and ballistic current density, which allow us to determine how the transmission is affected by structural changes in the molecule. In para-linked phenyl rings, the sigma- transmission can be suppressed by changing the remaining hydrogens to methyl substituents due to the inherent gauche-like structure of a benzene ring. When two neighboring phenyl rings are orthogonal to each other, the transmission through both pi- and sigma-systems can be effectively suppressed, making methyl-substituted oligophenyls promising candidates for conjugated insulators.</p></div></div></div>

scholarly journals Simultaneous Suppression of pi- and sigma- Transmission in pi-Conjugated Molecules

2020 ◽  
Author(s):  
Marc Hamilton Garner ◽  
Gemma C. Solomon
Keyword(s):  
Density Functional ◽  
Structural Changes ◽  
Twist Angle ◽  
Dielectric Materials ◽  
Methyl Groups ◽  
Conjugated Molecules ◽  
Functional Theory ◽  
Pi Conjugated ◽  
Phenyl Rings ◽  
Open Question

<div><div><div><p>Molecular dielectric materials require ostensibly conflicting requirements of high polarizability and low conductivity. As previous efforts towards molecular insulators focused on saturated molecules, it remains an open question whether pi- and sigma-transport can be simultaneously suppressed in conjugated systems. Here, we demonstrate that there are conjugated molecules where the sigma-transmission is suppressed by destructive sigma-interference, while the pi-transmission can be suppressed by a localized disruption of conjugation. Using density functional theory, we study the Landauer transmission and ballistic current density, which allow us to determine how the transmission is affected by various structural changes in the molecule. We find that in para-linked oligophenyl rings the sigma-transmission can be suppressed by changing the remaining hydrogens to methyl groups due to the inherent gauche-like structure of the carbon backbone within a benzene ring, similar to what was previously seen in saturated systems. At the same time, the methyl groups fulfil a dual purpose as they modulate the twist angle between neighboring phenyl rings. When neighboring rings are orthogonal to each other, the transmission through both pi- and sigma-systems is effectively suppressed. Alternatively, breaking conjugation in a single phenyl ring by saturating two carbons atoms with two methyl substituents on each carbon, results in suppressed pi- and sigma-transport independent of dihedral angle. These two strategies demonstrate that methyl-substituted oligophenyls are promising candidates for the development of molecular dielectric materials.</p></div></div></div>

scholarly journals Simultaneous Suppression of pi- and sigma- Transmission in pi-Conjugated Molecules

2020 ◽  
Author(s):  
Marc Hamilton Garner ◽  
Gemma C. Solomon
Keyword(s):  
Density Functional ◽  
Structural Changes ◽  
Twist Angle ◽  
Dielectric Materials ◽  
Methyl Groups ◽  
Conjugated Molecules ◽  
Functional Theory ◽  
Pi Conjugated ◽  
Phenyl Rings ◽  
Open Question

<div><div><div><p>Molecular dielectric materials require ostensibly conflicting requirements of high polarizability and low conductivity. As previous efforts towards molecular insulators focused on saturated molecules, it remains an open question whether pi- and sigma-transport can be simultaneously suppressed in conjugated systems. Here, we demonstrate that there are conjugated molecules where the sigma-transmission is suppressed by destructive sigma-interference, while the pi-transmission can be suppressed by a localized disruption of conjugation. Using density functional theory, we study the Landauer transmission and ballistic current density, which allow us to determine how the transmission is affected by various structural changes in the molecule. We find that in para-linked oligophenyl rings the sigma-transmission can be suppressed by changing the remaining hydrogens to methyl groups due to the inherent gauche-like structure of the carbon backbone within a benzene ring, similar to what was previously seen in saturated systems. At the same time, the methyl groups fulfil a dual purpose as they modulate the twist angle between neighboring phenyl rings. When neighboring rings are orthogonal to each other, the transmission through both pi- and sigma-systems is effectively suppressed. Alternatively, breaking conjugation in a single phenyl ring by saturating two carbons atoms with two methyl substituents on each carbon, results in suppressed pi- and sigma-transport independent of dihedral angle. These two strategies demonstrate that methyl-substituted oligophenyls are promising candidates for the development of molecular dielectric materials.</p></div></div></div>

scholarly journals Structural and computational investigation of an imine-based propeller-shaped macrocyclic cage

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Sriram Srinivasa Raghvan ◽  
Suresh Madhu ◽  
Velmurugan Devadasan ◽  
Gunasekaran Krishnasamy
Keyword(s):  
Band Gap ◽  
Density Functional ◽  
Strain Tensor ◽  
Strong Interactions ◽  
Soft Condensed Matter ◽  
Functional Theory ◽  
Self Assembling ◽  
Phenyl Rings ◽  
Crystal Volume

AbstractIn this study, we present the synthesis, spectroscopic and structural characterization of self-assembling gem-dimethyl imine based molecular cage (IMC). Self-assembling macrocycles and cages have well-defined cavities and have extensive functionalities ranging from energy storage, liquid crystals, and catalysts to water splitting photo absorber. IMC has large voids i.e., 25% of the total crystal volume thus could accommodate wide substrates. The synthesized imine-based molecular cages are stabilized by coaxial π bonded networks and long-range periodic van der Waal and non-bonded contacts as observed from the crystal structure. IMC also has typical properties of soft condensed matter materials, hence theoretical prediction of stress and strain tensor along with thermophysical properties were computed on crystal system and were found to be stable. Molecular dynamics revealed IMC is stabilized by, strong interactions between the interstitial phenyl rings. Density functional theory (DFT) based physicochemical properties were evaluated and has band gap of around 2.38ev (520 nm) similar to various photocatalytic band gap materials.

scholarly journals Integrating Density Functional Theory Modeling with Experimental Data to Understand and Predict Sorption Reactions: Exchange of Salicylate for Phosphate on Goethite

Soil Systems ◽  
2020 ◽  
Vol 4 (2) ◽  
pp. 27 ◽  
Author(s):  
James D. Kubicki ◽  
Tsutomu Ohno
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Mineral Water ◽  
Surface Complexes ◽  
Functional Theory ◽  
Complex Models ◽  
Mechanical Approach ◽  
Plant Exudates ◽  
Quantum Mechanical Approach

Density functional theory (DFT) calculations are a quantum mechanical approach that can be used to model chemical reactions on an atomistic scale. DFT provides predictions on structures, thermodynamics, spectroscopic parameters and kinetics that can be compared against experimentally determined data. This paper is a primer on the basics of utilizing DFT for applications in mineral-water interfaces. In our case-study, we use DFT to model the surface complexes of phosphate and salicylate adsorbed onto the (101) and (210) surfaces of α-FeOOH (goethite), as an example of combining DFT and experiment. These three components are important in the phosphorus-organic matter interactions in soils, and by comparing the energies of the two surface complexes, the exchange energy of salicylate for phosphate onto goethite can be estimated. The structures of the surface complexes are predicted and the resulting vibrational frequencies calculated based on these structures are compared to previous observations. Upon verification of reasonable surface complex models, the potential energy of exchanging salicylate for phosphate is calculated and shown to be significantly exothermic. This model result is consistent with observations of plant exudates, such as salicylate freeing adsorbed phosphate in soils under P-limited conditions.

scholarly journals Study on the CO Formation Mechanism during Coal Ambient Temperature Oxidation

Energies ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2587
Author(s):  
Shuo Liu ◽  
Yuguo Wu ◽  
Chunshan Zhou ◽  
Jianming Wu ◽  
Yulong Zhang
Keyword(s):  
Density Functional Theory ◽  
Ambient Temperature ◽  
Density Functional ◽  
Basis Set ◽  
Functional Theory ◽  
Temperature Oxidation ◽  
Ambient Temperatures ◽  
Mechanical Approach ◽  
Aldehyde Groups ◽  
Quantum Mechanical Approach

The CO formation rules of coal were analyzed by a self-developed testing device under ambient temperature. The changes of functional groups caused by oxidation were obtained using Fourier-transform infrared spectroscopy (FTIR). The experimental results showed that CO was generated during the ambient temperature oxidation. The highest concentration level of CO could be 389 ppm. The methylene and aldehyde groups on the side chains were involved in the reaction. For the quantum mechanical approach, we employed the density functional theory with the 6–31 G (d, p) basis set. Density functional theory–based computations interpreted the possible reaction sites on a coal molecule by electronic static potential analysis. The rationality of the predicted reactions was also evaluated by transition state analysis and energy analysis. This research theoretically proved that coal could be oxidized to carbon monoxide under ambient temperatures and gave the possible reaction paths.

scholarly journals DFT Study of the Electronic Structure of Cubic-SiC Nanopores with a C-Terminated Surface

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
M. Calvino ◽  
A. Trejo ◽  
M. I. Iturrios ◽  
M. C. Crisóstomo ◽  
Eliel Carvajal ◽  
...  
Keyword(s):  
Electronic Structure ◽  
Band Gap ◽  
Density Functional ◽  
Surface Passivation ◽  
Phase Changes ◽  
Surface Relaxation ◽  
Oh Radicals ◽  
Functional Theory ◽  
Band Gap Engineering ◽  
Chemical Surface

A study of the dependence of the electronic structure and energetic stability on the chemical surface passivation of cubic porous silicon carbide (pSiC) was performed using density functional theory (DFT) and the supercell technique. The pores were modeled by removing atoms in the [001] direction to produce a surface chemistry composed of only carbon atoms (C-phase). Changes in the electronic states of the porous structures were studied by using different passivation schemes: one with hydrogen (H) atoms and the others gradually replacing pairs of H atoms with oxygen (O) atoms, fluorine (F) atoms, and hydroxide (OH) radicals. The results indicate that the band gap behavior of the C-phase pSiC depends on the number of passivation agents (other than H) per supercell. The band gap decreased with an increasing number of F, O, or OH radical groups. Furthermore, the influence of the passivation of the pSiC on its surface relaxation and the differences in such parameters as bond lengths, bond angles, and cell volume are compared between all surfaces. The results indicate the possibility of nanostructure band gap engineering based on SiC via surface passivation agents.

First-Principles Study of Triangle Terarylene as a Possible Optical Molecular Switch

2011 ◽  
Vol 311-313 ◽  
pp. 526-529
Author(s):  
Cai Juan Xia ◽  
Han Chen Liu ◽  
Ji Xin Yin
Keyword(s):  
First Principles ◽  
Density Functional ◽  
Molecular Switch ◽  
Optical Switches ◽  
Functional Theory ◽  
Closed Ring ◽  
Potential Applications ◽  
Homo Lumo ◽  
Non Equilibrium Green’S Function ◽  
Theoretical Results

Using non-equilibrium Green’s function formalism combined with first-principles density functional theory, we investigate the electronic transport properties of a triangle terarylene(open- and closed-ring forms) optical molecular switch. The influence of the HOMO-LUMO gaps and the spatial distributions of molecular orbitals on the quantum transport through the molecular device is discussed. Theoretical results show that the conductance of the closed-ring is 3-8 times larger than that of open-ring, which expect that this system can be one of good candidates for optical switches due to this unique advantage, and may have some potential applications in future molecular circuit.

A New Approach for Calculating the Band Gap of Semiconductors within the Density Functional Method

2015 ◽  
Vol 242 ◽  
pp. 434-439 ◽  
Author(s):  
Vasilii E. Gusakov
Keyword(s):  
Density Functional Theory ◽  
Band Gap ◽  
Density Functional ◽  
Density Functional Method ◽  
Functional Method ◽  
Localized States ◽  
Experimental Accuracy ◽  
Functional Theory ◽  
New Approach ◽  
The Density Functional Theory

Within the framework of the density functional theory, the method was developed to calculate the band gap of semiconductors. We have evaluated the band gap for a number of monoatomic and diatomic semiconductors (Sn, Ge, Si, SiC, GaN, C, BN, AlN). The method gives the band gap of almost experimental accuracy. An important point is the fact that the developed method can be used to calculate both localized states (energy deep levels of defects in crystal), and electronic properties of nanostructures.

Sign in / Sign up

Export Citation Format

Share Document