Karakterisasi Umbi dan Pati Lima Kultivar Ubi Kayu (Manihot esculenta)

Agrotek ◽  
2018 ◽  
Vol 3 (1) ◽  
Author(s):  
Murtiningrum Murtiningrum ◽  
Elvis F. Bosawer ◽  
P. Istalaksana ◽  
Abadi Jading

<em>The aim of this research was to evaluate the chemical composition of tubers and cassava starch and cassava starch physical Masni District. This study consists of three (3) stages: preparation of materials and chemical characterization of fresh tubers, starch extraction and chemical and physical characterization of cassava. Extraction is done by using a 3:1 ratio of water and tubers. The results showed that the starch content of the fresh tubers ranged from 13.12% to 46.09% while the starch content of cassava starch between 81.40% to 89.55%. Amylose starch levels ranged from 12.28% to 27.38% while the amylopectin content ranged from 72.61% to 87.71%. Starch granule shape is round, round cut, elliptical with a size ranging between 5-25 ?m, the temperature ranges from 65-69<sup>o</sup>C gelatinization and power development starches ranged from 1.42 to 26.65.</em>

Heritage ◽  
2019 ◽  
Vol 2 (3) ◽  
pp. 2597-2611 ◽  
Author(s):  
Mario Bandiera ◽  
Patrice Lehuédé ◽  
Marco Verità ◽  
Luis Alves ◽  
Isabelle Biron ◽  
...  

This work aims to characterise the chemical composition of Roman opaque red glass sectilia dated to the 2nd century A.D and to shed light on Roman glassmaking production of different shades of red, from red to reddish-brown. Due to the lack of technical historical sources for this period many questions about technological aspects still remain. In this project a multi-disciplinary approach is in progress to investigate the red glass sectilia with several red hues from the Imperial Villa of Lucius Verus (161–169 A.D.) in Rome. First, colorimetric measurements were taken to identify the various red hues. The second step was chemical characterization of the samples and the identification of crystalline colouring phases. Particle Induced X-Ray Emission (PIXE) analysis was used to investigate the chemical composition of these glass samples, while the crystalline phases were identified by Raman Spectroscopy and Scanning Electrons Microscope with Energy Dispersive X-ray Spectrometry (SEM-EDS). Using SEM-EDS nanoparticles were detected as a colouring agent, the chemical composition and the morphology of which has been studied in depth. This information has been compared with the colorimetric analysis to establish any correlation with the different colour hues.


2013 ◽  
Vol 845 ◽  
pp. 256-260 ◽  
Author(s):  
M. Abubakar ◽  
A.B. Aliyu ◽  
Norhayati Ahmad

Porous ceramics were produced by compaction method of Nigerian clay and cassava starch. The samples were prepared by adding an amount from 5 to 30%wt of cassava starch into the clay and sintered at temperature of 900-1300°C. The influence of cassava starch content on the bulk density and apparent porosity was studied. The result of XRD and DTA/TGA shows that the optimum sintering temperature was found to be 1300°C. The percentage porosity increased from 12.87 to 43.95% while bulk density decreased from 2.16 to 1.46g/cm3 with the increase of cassava starch from 5 to 30%wt. The effect of sintering temperature and cassava starch content improved the microstructure in terms of porosity and the thermal properties of porous clay for various applications which requires a specific porosity.


2021 ◽  
Author(s):  
Florian Ungeheuer ◽  
Diana Rose ◽  
Dominik van Pinxteren ◽  
Florian Ditas ◽  
Stefan Jacobi ◽  
...  

&lt;p&gt;We present the results from a chemical characterization study of ultrafine particles (UFP), collected nearby Frankfurt International Airport where particle size distribution measurements showed high number concentrations for particles with a diameter &lt;50 nm. Aluminium filter samples were collected at an air quality monitoring station in a distance of 4 km to Frankfurt airport, using the 13-stage cascade impactor Nano-MOUDI (MSP Model-115). The chemical characterization of the ultrafine particles in the size range of 0.010-0.018 &amp;#956;m, 0.018-0.032 &amp;#956;m and 0.032-0.056 &amp;#956;m was accomplished by the development of an optimized filter extraction method. An UHPLC method for chromatographic separation of homologous series of hydrophobic and high molecular weight organic compounds, followed by heated electrospray ionization (ESI) and mass analysis using an Orbitrap high-resolution mass spectrometer was developed. Using a non-target screening, ~200 compounds were detected in the positive ionization mode after filtering, in order to ensure high quality of the obtained data. We determined the molecular formula of positively charged adducts ([M+H]&lt;sup&gt;+&lt;/sup&gt;; [M+Na]&lt;sup&gt;+&lt;/sup&gt;), and for each impaction stage we present molecular fingerprints (Molecular weight vs Retention time, Kroll-diagram, Van-Krevelen-diagram, Kendrick mass defect plot) in order to visualize the complex chemical composition. The negative ionization mode led only to the detection of a few compounds (&lt;20) for which reason the particle characterization focuses on the positive ionization mode. We found that the majority of detected compounds belong to homologous series of two different kinds of organic esters, which are base stocks of aircraft lubrication oils. In reference to five different jet engine lubrication oils of various manufacturers, we identified the corresponding lubricant base stocks and their additives in the ultrafine particles by the use of matching retention time, exact mass and MS/MS fragmentation pattern of single organic molecules. As the relevance of the chemical composition of UFP regarding human health is depending on the mass contribution of each compound we strived for quantification of the jet engine oil compounds. This was achieved by standard addition of purchased original standards to the native sample extracts. Two amines serving as stabilizers, one organophosphate used as an anti-wear agent/metal deactivator and two ester base stocks were quantified. Quantification of the two homologous ester series was carried out using one ester compound and cross-calibration. The quantitative determination is burdened by the uncertainty regarding sampling artefacts in the Nano-MOUDI. Therefore we characterized the cascade impactor in a lab experiment using the ester standard. Particle size distribution measurements conducted parallel to the filter sampling enables the determination of jet engine oil contribution to the UFP mass. Results indicate that aircraft emissions strongly influence the mass balance of 0.010-0.018 &amp;#956;m particles. This contribution decreases for bigger sized particles (0.018-0.056 &amp;#956;m) as presumably more sources get involved. The hereby-introduced method allows the qualitative and quantitative assignment of aircraft emissions towards the chemical composition and total mass of airport related ultrafine particles.&lt;/p&gt;


2019 ◽  
Vol 625 ◽  
pp. A147 ◽  
Author(s):  
M. Agúndez ◽  
N. Marcelino ◽  
J. Cernicharo ◽  
E. Roueff ◽  
M. Tafalla

An exhaustive chemical characterization of dense cores is mandatory to our understanding of chemical composition changes from a starless to a protostellar stage. However, only a few sources have had their molecular composition characterized in detail. Here we present a λ 3 mm line survey of L483, a dense core around a Class 0 protostar, which was observed with the IRAM 30 m telescope in the 80–116 GHz frequency range. We detected 71 molecules (140 including different isotopologs), most of which are present in the cold and quiescent ambient cloud according to their narrow lines (FWHM ~ 0.5 km s−1) and low rotational temperatures (≲10 K). Of particular interest among the detected molecules are the cis isomer of HCOOH, the complex organic molecules HCOOCH3, CH3OCH3, and C2H5OH, a wide variety of carbon chains, nitrogen oxides like N2O, and saturated molecules like CH3SH, in addition to eight new interstellar molecules (HCCO, HCS, HSC, NCCNH+, CNCN, NCO, H2NCO+, and NS+) whose detection has already been reported. In general, fractional molecular abundances in L483 are systematically lower than in TMC-1 (especially for carbon chains), tend to be higher than in L1544 and B1-b, and are similar to those in L1527. Apart from the overabundance of carbon chains in TMC-1, we find that L483 does not have a marked chemical differentiation with respect to starless/prestellar cores like TMC-1 and L1544, although it does chemically differentiate from Class 0 hot corino sources like IRAS 16293−2422. This fact suggests that the chemical composition of the ambient cloud of some Class 0 sources could be largely inherited from the dark cloud starless/prestellar phase. We explore the use of potential chemical evolutionary indicators, such as the HNCO/C3S, SO2/C2S, and CH3SH/C2S ratios, to trace the prestellar/protostellar transition. We also derived isotopic ratios for a variety of molecules, many of which show isotopic ratios close to the values for the local interstellar medium (remarkably all those involving 34S and 33S), while there are also several isotopic anomalies like an extreme depletion in 13C for one of the two isotopologs of c-C3H2, a drastic enrichment in 18O for SO and HNCO (SO being also largely enriched in 17O), and different abundances for the two 13C substituted species of C2H and the two 15N substituted species of N2H+. We report the first detection in space of some minor isotopologs like c-C3D. The exhaustive chemical characterization of L483 presented here, together with similar studies of other prestellar and protostellar sources, should allow us to identify the main factors that regulate the chemical composition of cores along the process of formation of low-mass protostars.


MAUSAM ◽  
2021 ◽  
Vol 62 (3) ◽  
pp. 425-432
Author(s):  
P.R. SALVE ◽  
T. GOBRE ◽  
R.J. KRUPADAM ◽  
S. SHASTRY ◽  
A. BANSIWAL ◽  
...  

The chemical composition of rainwater changes from place to place and region to region under the influence of several major factors, viz., topography, its distance from sea and overall rainfall pattern. The present study investigated the chemical composition of precipitation at Akkalkuwa, district Nandurbar, in the State Maharashtra during southwest monsoon. The rainwater samples were collected on event basis during June-September 2008 and were analyzed for pH, major anions (F, Cl, NO3, SO4) and cations (Ca, Mg, Na, K, NH4). The pH varied from 6.0 and 6.8 with an average of 6.29 ± 0.23 indicating alkaline nature and dominance of Ca in precipitation. The relative magnitude of major ions in precipitation follows the pattern as Ca>Cl>Na>SO4>NO3>HCO3>NH4>Mg>K>F>H. The Neutralization factor (NF) was found to be NFCa = 0.95, NFNH4 = 0.31, NFMg = 0.27 and NFK = 0.08 indicating below cloud process in which crustal components are responsible for neutralization of anions. Significant correlation of NH4 with SO4 and NO3 was observed with correlation coefficient of r = 0.79 and 0.75, respectively.


2011 ◽  
Vol 63 (10) ◽  
pp. 595-603 ◽  
Author(s):  
Renata Baraldi de Pauli ◽  
Leda Battestin Quast ◽  
Ivo Mottin Demiate ◽  
Lyssa Setsuko Sakanaka

2012 ◽  
Vol 550-553 ◽  
pp. 1503-1512 ◽  
Author(s):  
Kamol Maikrang ◽  
Klanarong Sriroth ◽  
Kunruedee Sangseethong ◽  
Amnat Jarerat

Raw cassava starch was treated with α-amylase and amyloglucosidase in aqueous solution under annealing condition to obtain starch granules with rough and porous surfaces. Many different pits and pores formed by the activity of the enzymes on the surface granules and were observed by scanning electron microscopy (SEM). The obtained starch granules with rough surfaces were mechanically blended with poly(butylenes adipate-co-terephthalate)(PBAT) at different ratios by using a single screw extruder. The results showed that the samples comprised of enzymatically treated starch blends had higher elongation than those comprised of untreated starch blends. At 10% starch content, the treated starch/PBAT blend had about 37.55% more elongation than the untreated starch/PBAT blend. This resulted in the improved compatibility of the starch granules and PBAT matrix in the blends as confirmed by SEM.


2020 ◽  
Vol 10 (18) ◽  
pp. 6414
Author(s):  
Nuno Rodrigues ◽  
Teresa Pinho ◽  
Susana Casal ◽  
António M. Peres ◽  
Paula Baptista ◽  
...  

Oleaster (Olea europaea var. sylvestris), or the wild olive tree, has great interest as a source of genetic material for olive breeding programs. Nevertheless, information about its oil composition is scarce. In the present work, the characterization of oleaster fruit morphology and oil chemical composition from three different tree populations in Northeastern Portugal (Moncorvo, Alijó and Vila Nova de Foz Côa) was performed. The three studied populations presented some morphological differences in the fruits, but similar oil chemical composition. Oleic acid (68.9–70.6%) was the most abundant fatty acid. High variability was observed in total tocopherol content, ranging between 263 and 503 mg/kg. Additionally, high amounts of total sterols were found, from 1742 to 2198 mg/kg of oil. A rich composition in phenols was found with 14 phenolic compounds identified. The evaluated parameters for oleander oils allowed discriminating the oils according to the geographical origin and were consistent with those commonly found in olive oil, showing that they are particularly rich in antioxidants and can be exploited in breeding programs to increase the amounts of bioactive compounds in cultivated oils.


2014 ◽  
Vol 69 (1-2) ◽  
pp. 10-20 ◽  
Author(s):  
Andrea Aliboni

Propolis is a beehive product that bees manufacture by mixing their own wax with vegetable resins collected from different species of trees and bushes. The chemical composition of propolis is very variable because it depends on the flora locally available, and specimens from different geographical and climatic areas display unique properties. In this paper, the results of the chemical characterization of some propolis specimens collected in northern California and in Oregon are presented. Their chemical compositions show that all specimens contain resins from poplars of the Tacamahaca section (balsam poplars) - characteristic of the western part of the North American continent. Nevertheless, some of the specimens are of mixed origin because they also contain resins from poplars of the Aigeiros section (cottonwoods) - also present in this part of the world. Propolis causes allergies in sensitive human individuals, which are due to the presence of certain esters. The contents of known propolis allergenic esters - phenylethyl caffeate, 1,1-dimethylallyl caffeate, benzyl cinnamate, and benzyl salicylate - have been investigated in these specimens and found to depend on the botanical origin.


Paleobiology ◽  
1991 ◽  
Vol 17 (2) ◽  
pp. 133-144 ◽  
Author(s):  
Erik W. Tegelaar ◽  
Hans Kerp ◽  
Henk Visscher ◽  
Pieter A. Schenck ◽  
Jan W. de Leeuw

The impact of the variations in the chemical composition of higher vascular plant cuticles on their fossil record is usually not considered in paleobotanical and, more particularly, taphonomic studies. Here we address the subject with reference to the chemical characterization of insoluble cuticular matrices of a large variety of recent and fossil cuticles. The cuticles were analyzed using Curie-point pyrolysis-gas chromatographic techniques. Cuticular matrices of extant higher plants consist either of the biopolyester cutin, the insoluble, non-hydrolyzable polymethylenic biopolymer cutan, or a mixture of both biopolymers. In fossil cuticles an additional cuticular matrix type consisting of cutan and cutin-derived material is recognized. On the basis of the variations in their chemical composition and the different behavior of the cuticular constituents (viz., cutin and cutan) during diagenesis, it is concluded that the paleobotanical record of cuticles will be biased toward taxa originally having a significant amount of cutan in their cuticular matrix.


Sign in / Sign up

Export Citation Format

Share Document