scholarly journals Analisis Penerapan Job Order Costing Method Terhadap Harga Pokok Produksi Untuk Meningkatkan Akurasi Harga Jual Produk Pada Maju Jaya Aluminium Kecamatan Cina Kabupaten Bone

2019 ◽  
Vol 1 (2) ◽  
pp. 143-162
Author(s):  
Martinah Martinah ◽  
Muctar Nuhung
Keyword(s):  
Calculation Method ◽  
Production Cost ◽  
Raw Material ◽  
Selling Price ◽  
Labor Costs ◽  
Profit Rate ◽  
Cost Of Production ◽  
The Difference ◽  
The Cost

This study aims to compare the cost of the 2M CA type of storefront production that has been applied in Forward Jaya Aluminum by calculating the production cost principle using the job order costing method. Data is collected through observation, interviews, and documentation. Furthermore, the data is analyzed using qualitative methods. While the calculation method used in this study is the method of job order costing or the cost of the order. The results of the study found that the calculation of the cost of production of type 2 M CA storefront was IDR 1,300,000 with a set profit rate of 19.6% with a selling price of IDR 1,550,000, while the calculation using the job order costing method was equal to Rp 1,329,217 with a selling price of Rp 1,589,744 with a profit rate of 19.6%. Based on the results of his analysis, the difference in the calculation of cost of goods manufactured is due to the fact that Maju Jaya Aluminum does not identify in detail the elements of the cost of production, so the cost of production calculated by Maju Jaya Aluminum is lower than using the job order costing method. We recommend that Maju Jaya Aluminum correct the calculation of cost of goods manufactured according to the job order costing method by calculating and identifying raw material costs, direct labor costs, and factory head costs so that the specified selling price can be accurate and increase.

scholarly journals CALCULATION OF PRODUCTION COST IN UD. USAHA BARU WITH FULL COSTING METHOD

2019 ◽  
Vol 4 (1) ◽  
pp. 28-42
Author(s):  
Suprianto Suprianto ◽  
Bina Andari ◽  
Yely Sulistyawati
Keyword(s):  
Production Cost ◽  
Raw Materials ◽  
Analysis Data ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Other Information ◽  
Cost Of Production ◽  
The Cost

This study aims to evaluate the calculation of cost of production. The accuracy of the calculation of cost of production is influenced by the suitability in the accumulation and calculation of production costs which includes the cost of raw materials, direct labor costs and other costs (factory overhead costs). This research was conducted at UKM UD. Usaha Baru which aims to determine the calculation of cost of production at UD. Usaha Baru and to find out whether the calculation of cost of production is in accordance with the full costing method. The technique (method) of data analysis used in this study is quantitative analysis. Data collection techniques use interview techniques directly to obtain information from the number of units of monthly production, raw material costs, direct labor costs, and factory overhead costs, as well as other information relating to the calculation of cost of production. Based on the evaluation results for the calculation of raw material costs and labor costs are in accordance with the full costing method. However, the calculation of factory overhead costs is not in accordance with the full costing method because there are costs that have not been included in the calculation of production costs.

PERHITUNGAN HARGA POKOK PRODUKSI DENGAN METODE FULL COSTING PADA USAHA AMPLANG UD. TAUFIK JAYA MAKMUR DI SAMARINDA

2020 ◽  
Vol 8 (2) ◽  
pp. 142
Author(s):  
Muhammad Ramadhani
Keyword(s):  
Raw Materials ◽  
Production Costs ◽  
Selling Price ◽  
Labor Costs ◽  
Descriptive Research ◽  
Cost Of Production ◽  
The Difference ◽  
The Cost ◽  
Production Period

Determination of cost of goods must be applied appropriately and careful, because this can help entrepreneurs to compete in a manner well and in a relatively long period of time. The purpose of this study was to determine the calculation of the cost of production of the UD Taufik Jaya Makmur Samarinda Samarinda business which is used today and the calculation of the cost of production in the UD Taufik Jaya Makmur Samarinda Samarinda business according to the full costing method. Full costing is a method of determining the cost of production that takes into account all elements of production costs into the cost of production, which consists of the cost of raw materials, direct labor costs, and factory overhead costs, both behaving variable and fixed. The method used in this research is descriptive research with a quantitative approach. The variables of this study include the cost of production using the full costing method. Data analysis was performed by calculating the cost of production based on the concept of the full costing method. The results showed that the results of the analysis of the calculation of the Cost of Production of envelopes per kg in the UD Taufik Jaya Makmur Samarinda Endeavor conducted at present were Rp. 80,312.50 per kg. Whereas the Cost of Production of envelopes per kg in the UD Taufik Jaya Makmur Samarinda Business in Samarinda if calculated using the full costing method is Rp 83,068.23 per kg. The difference in cost of production of the UD Taufik Jaya Makmur Samarinda Amplang Business conducted so far using the full costing method for the UD Taufik Jaya Makmur Samarinda Endeavor is Rp 2,755.73 per kg. It is recommended that UD Taufik Jaya Makmur in Samarinda should calculate and charge all elements of the factory overhead costs in one production period (month). This is done so that information about the cost of production can be a good basis for the factory in setting the selling price of envelopes at UD Taufik Jaya Makmur in Samarinda.

EVALUASI PENERAPAN METODE JOB ORDER COSTING DALAM PENENTUAN HARGA POKOK PRODUKSI (Studi Kasus pada PT. Organ Jaya)

2019 ◽  
Vol 7 (01) ◽  
pp. 47
Author(s):  
Jeffry .
Keyword(s):  
Production Cost ◽  
Raw Materials ◽  
Production Costs ◽  
Raw Material ◽  
Accurate Information ◽  
Labor Costs ◽  
Overhead Cost ◽  
Cost Of Production ◽  
Production Calculation ◽  
The Cost

PT . Jaya organ producing products based on orders received from customers , and therefore in determining the cost of production of PT . Jaya organs using job order costing. Production cost consists of raw material costs , direct labor costs and factory overhead costs. For the calculation of the cost of raw materials PT . Organ jaya calculate based on the existing formula , but for the cost of direct labor and factory overhead costs PT . Jaya organs not calculate accurately match the job order costing method . Both the cost is calculated based on the rates , so the cost of direct labor and factory overhead costs are absorbed by the product orders can not be calculated specifically. With job order costing method , PT . Organ Jaya will easily find the cost of production for each order , because in the calculation of the cost of production is not affected by the initial inventory of final goods as well as ordered , then the cost of production is the basis for determining the cost of production . Calculation of cost of production is carried out by PT . Jaya organ still manually so that the resulting lack of accurate information , in this case PT . Jaya organs not use time sheet and job cost ticket as a medium in the calculation of production costs in order to determine the cost of production . Keyword : Job order costing-overhead cost

scholarly journals Analisis dan Perancangan Aplikasi Berbasis Web untuk Pengelolaan Harga Pokok Produksi Menggunakan Metode Harga Pokok Proses

2019 ◽  
Vol 17 (2) ◽  
pp. 1
Author(s):  
Magdalena Karismariyanti
Keyword(s):  
Web Application ◽  
Production Cost ◽  
Raw Materials ◽  
Unit Cost ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Web Based ◽  
Cost Of Production ◽  
The Cost

Manufacturing of products incurred raw material costs, direct labor costs, and factory overhead   costs, which could be used to determine the price of the product sold.  On the contrary, the company, which manufactured thousands of toys and dolls monthly, did not have proper cost record. Production cost calculated by the average of total cost divided with a total of confirmed product. Hence, the production cost for each product could not be defined precisely. Based on the problems described, a web application was developed to manage the recording of transaction and automatically calculated the cost of production. This application's functionalities were able to manage purchasing activities, handing over raw materials to production, confirming finished goods, calculating production costs, posting journals and ledgers, and reporting of the cost of production. This application could help companies to calculate the unit cost. Based on a comparison between manual and application testing, it could be concluded that output in the application displayed an exact match from the manual. Thus, this web-based application was ready to be implemented in the company.

scholarly journals Perbandingan Perhitungan Harga Pokok Produksi Berdasarkan Metode Full Costing Vs Variable Costing Pada Produksi Sambel Pecel

2020 ◽  
Vol 1 (2) ◽  
pp. 111-118
Author(s):  
Darno Darno ◽  
Liana Dwi Muasyaroh
Keyword(s):  
Fast Food ◽  
Cost Accounting ◽  
Raw Material ◽  
Variable Cost ◽  
Selling Price ◽  
Manufacturing Companies ◽  
Labor Costs ◽  
Full Cost ◽  
Cost Of Production ◽  
The Cost

Manufacturing company is a company that processes raw goods into semifinished or finished goods. In manufacturing companies to determine the selling price does not escape from the calculation of the cost of production which is appropriate and in accordance with cost accounting standards. PT. Indramukti Segara is a fast food company that comes from natural ingredients. Products produced by PT. Indramukti Segara includes: pecel sauce and fried onions. Calculation of cost of goods manufactured by PT. Indramukti Segara is not right to determine the selling price, because the company only calculates the material used multiplied by the price of the material. On this occasion the author analyzes the cost of production in accordance with the Cost Accounting standard and conducts a comparison between two methods, namely: the full costing method and the variable costing method.  The purpose of this study is to compare the cost of production using the full cost and variable costs method. The data collected comes from the results of interviews with the Production Administration, Sambel Pecel production supervisor, and employees of Sambel production at PT. Indramukti Segara. Data obtained includes data on raw material expenditure, direct labor costs, and factory overhead costs that are fixed and variable. Based on the comparison of the calculation of Cost of Production between the full cost method and variable costs there are differences, because the full cost method calculates all costs that are fixed and variable while the variable cost method only calculates costs that are variable in nature.

scholarly journals ACTIVITY BASED COSTING: METODE AKURAT MENENTUKAN BIAYA SEWA KAMAR HOTEL

AdBispreneur ◽  
2020 ◽  
Vol 5 (1) ◽  
pp. 51
Author(s):  
Suryanto ◽  
Mas Rasmini ◽  
Thealice Lidwina
Keyword(s):  
Calculation Method ◽  
Production Cost ◽  
Quantitative Method ◽  
Production Method ◽  
Activity Based Costing ◽  
Literature Study ◽  
Calculation Results ◽  
Cost Of Production ◽  
The Difference ◽  
The Cost

Every company has an interest in calculating the cost of production. Cost of production is a way to calculate the costs used in producing a product. This study aims to analyze the calculation of the cost of the production method used by the hotel and determine the cost of production calculated by the method of activity-based costing (ABC). The method used in this research is a quantitative method. Data collected through observation, unstructured interviews, and literature study. The results of this study indicate that the calculation of the cost of production of hotel rooms conducted by the company occurred under costing for standard, superior, and superior plus types of rooms. As for the type of family room, family plus, and family-standard over costing occurs. The difference in the calculation results occurs because the calculation method by the company has not been done in detail as in the ABC method.Setiap perusahaan berkepentingan terhadap perhitungan harga pokok produksi. Harga pokok produksi adalah cara untuk menghitung biaya yang digunakan dalam menghasilkan suatu produk. Penelitian ini bertujuan untuk menganalisis perhitungan metode harga pokok produksi yang digunakan pihak hotel dan mengetahui harga pokok produksi yang dihitung dengan metode Activity Based Costing (ABC). Metode yang digunakan dalam penelitian ini adalah metode kuantitatif. Data dikumpulkan melalui observasi, wawancara tidak terstruktur, dan studi pustaka. Hasil penelitian ini menunjukkan bahwa perhitungan harga pokok produksi kamar hotel yang dilakukan oleh pihak perusahaan terjadi undercosting untuk jenis kamar standard, superior, dan  superior plus. Sedangkan untuk jenis kamar family, family plus, dan family standard terjadi overcosting. Perbedaan hasil perhitungan tersebut terjadi karena dalam metode perhitungan yang dilakukan perusahaan belum dilakukan secara detail sebagaimana dalam metode ABC.

SELISIH BIAYA PRODUKSI SEBAGAI ALAT PENGENDALIAN MANAJEMEN PT INDO PUSAKA BERAU

2019 ◽  
Vol 3 (02) ◽  
pp. 397
Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM
Keyword(s):  
Raw Materials ◽  
Field Research ◽  
Analytical Tool ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Library Research ◽  
The Difference ◽  
The Cost

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  

scholarly journals Analisis Perhitungan Dan Penentuan Harga Pokok Produksi Pada PT. Mutifa Medan

2019 ◽  
Vol 2 (1) ◽  
pp. 12
Author(s):  
John Fisher Gulo ◽  
Kamil Mustafa ◽  
Ninny Siregar
Keyword(s):  
Production Cost ◽  
Raw Materials ◽  
Descriptive Analysis ◽  
Production Costs ◽  
Total Production ◽  
Labor Costs ◽  
Average Production ◽  
Qualitative Descriptive ◽  
Cost Of Production ◽  
The Cost

<p>The cost of production is needed to determine the cost of production of a product. Costs incurred to produce the product must be clear, so that the determination of the cost of production would be appropriate. Imprecision in calculating the cost of production will be misleading in making management decisions. Data collection methods used in this study include: Documentation, Interview, Observation. This study analyzed using qualitative descriptive analysis comparing the theory with actual results of the company. PT MUTIFA in determining the cost of production using the full costing method. PT MUTIFA in determining the cost of production, all costs incurred are treated as production costs, both the cost of major raw materials, cost of auxiliary materials, packaging materials costs and production overhead. Classification of production costs in accordance with the theory that exists is composed of material costs, labor costs and production overhead costs. Total production cost per month of each element calculation the average monthly cost is Rp. 73.111.118,260,- and the average number of finished products Paracetamol tablet 500 mg tablet is as much 566,666.67 per month. Based on data on average production costs in 2009, then the production cost per tablet is .Rp. 129,019.</p>

scholarly journals Analisis Penerapan Metode Full Costing Dalam Perhitungan Harga Pokok Produksi Untuk Penetapan Harga Jual

2019 ◽  
Vol 7 (1) ◽  
pp. 173-178
Author(s):  
Alviani Lestari ◽  
Siti Ita Rosita ◽  
Tri Marlina
Keyword(s):  
Labor Cost ◽  
Cost Calculation ◽  
Selling Price ◽  
Total Production ◽  
Product Price ◽  
Overhead Cost ◽  
Material Costs ◽  
Cost Of Production ◽  
The Difference ◽  
The Cost

Lemari Syukur Factory is a home industry that produces wardrobe cabinets. It determines selling price based estimation which is inappropriate. The main issue is that the company does not possess proper cost classification system in determining the cost of goods sold.  This research is aimed to assist determining the cost of production as the basis for making up finished goods price using full costing method. This research includes quallitative analysis research. Data were collected through interviews and documentation and analyzed by qualitative analysis techniques. The study resulted (1) for cost of goods sold calculation, the factory charged direct material costs of Rp. 325.000.000, direct labor cost of Rp. 211.200.000 and factory overhead cost of Rp. 556,800,000. Total production cost to produce 2,196 units of cabinets in one year amounted to Rp. 1.093.000.000. The factory estimated cost of goods sold for each unit is of Rp. 497.723, and the selling price per cabinet unit is Rp. 500.000. (2) Using full costing method, the cost calculation consisted of direct material costs of Rp. 325.000.000, direct labor cost equal to Rp. 211.200.000, factory overhead fixed cost Rp. 12,042,250, and variable factory overhead cost Rp. Rp. 525.550.000. Thus, the cost of production was Rp. 1,073,792,250 for 2,196 units of cabinets. The cost of goods sold per cabinet unit is Rp. 488.976 and the selling price is Rp. 619.559. (3) The difference in cost of goods sold between full costing and the factory calculation is of Rp 8.747. While the difference between finished product price using full costing and the factory estimation is Rp 133.766.                                          

scholarly journals ANALISYS PRODUCTION COST of SAWMILL ON THE PT KATINGAN TIMBER CELEBES IN WAMLANA VILLAGE BURU REGENCY

2020 ◽  
Vol 4 (1) ◽  
pp. 64-79
Author(s):  
Fitri N.S. Ellis ◽  
Troice E. Siahaya ◽  
Mersiana Sahureka
Keyword(s):  
Production Cost ◽  
Raw Materials ◽  
Labor Cost ◽  
Research Data ◽  
Overhead Cost ◽  
Interview Methods ◽  
Sawmill Industry ◽  
Cost Of Production ◽  
The Difference ◽  
The Cost

The objective of this study was to find out components of production cost and analyzing the cost of production materials which used full costing method and variable costing method. This research was conducted at October 2019 on PT. Katingan Timber Celebes Wamlana Village, Fenaleisela Subdistrict, Buru Regency. The company is a buried sawmill industry at Buru Island when has a primary industrial license for timber. Research data were collected by observation, documentation and interview methods, and then analyzed by full costing and variable costing methods. The result showed that the components of production cost consist of raw materials cost, direct labor cost used fixed factory overhead cost and variable factory overhead cost. The cost of production used costing method have value of  Rp.5.120.341.644,- more higher compered to variable costing is Rp.4.542.320.899,- the difference value of the cost of production due to full costing methods which imposes the fixed overhead cost and the variable overhead cost, that the cost of production is higher than with variable costing methods which imposes by factory overhead cost.

Sign in / Sign up

Export Citation Format

Share Document