scholarly journals About the possibility of simulating angles of tropospheric refraction by GPS measurement data.

2020 ◽  
Vol 2020 (6) ◽  
Author(s):  
M.G. Dembelov ◽  
◽  
Yu.B. Bashkuev ◽  
2014 ◽  
Vol 556-562 ◽  
pp. 2783-2786
Author(s):  
Qing Hai Meng

For GPS measurement signal in aircraft experiment is often affected by transmission environment, and interfered with impulsive noise, hereby a SVD combined with wavelet neural network to detect and eliminate the impulsive noise method was proposed. The received GPS data is decomposed by SVD, and the decomposed component is acted as the input of wavelet neural network. Letts criterion is adopted to detect the impulsive noise according to the output residue error of the wavelet neural network. For the detection of the interference points of impulse noise, it can use wavelet network output to replace the measured value, so as to eliminate impulsive noise.


2005 ◽  
Vol 57 (9) ◽  
pp. 747-753 ◽  
Author(s):  
Byoung-Sun Lee ◽  
Jae-cheol Yoon ◽  
Yoola Hwang ◽  
Jaehoon Kim

2019 ◽  
pp. 52-56
Author(s):  
Yu.F. Glukhov ◽  
N.V. Krutikov ◽  
A.V. Ivanov ◽  
N.P. Muravskaya

We have studied and analyzed status and metrological supervision of blood glucose monitors, individual devices for a person’s blood glucose level measurement. It has been indicated that nowadays blood glucose monitors like other individual devices for medical measurement are not allowed to be involved in telemedicine public service. This accounts for absence of metrological supervision with these measurement devices in telemedicine. In addition, the key problem is absence of safe methods and means of remote verificaition, calibration and transmission of measurement data to health care centers. The article offers a remote test method for blood glucose monitors using a number of resistors with values correlating with measured blood glucose level. The available method has been successfully trialed in real practice.


2014 ◽  
Vol 5 (2) ◽  
pp. 157-166 ◽  
Author(s):  
Cs. Szász

The paper presents an intelligent building (IB) development strategy emphasizing the locally available non-polluting renewable energy resources utilization. Considering the immense complexity of the topic, the implementation strategy of the main energy-flow processes is unfolded, using the net zero-energy building concept (NZEB). Noticeably, in the first research steps the mathematical background of the considered NZEB strategy has been developed and presented. Then careful LabView software-based simulations prove that the adopted strategy is feasible for implementation. The result of the above mentioned research efforts is a set of powerful and versatile software toolkits well suitable to model and simulate complex heating, ventilation and air-conditioning processes and to perform energy balance performance evaluations. Besides the elaborated mathematical models, concrete software implementation examples and measurement data also is provided in the paper. Finally, the proposed original models offer a feasible solution for future developments and research in NZEB applications modelling and simulation purposes.


2005 ◽  
Vol 33 (1) ◽  
pp. 38-62 ◽  
Author(s):  
S. Oida ◽  
E. Seta ◽  
H. Heguri ◽  
K. Kato

Abstract Vehicles, such as an agricultural tractor, construction vehicle, mobile machinery, and 4-wheel drive vehicle, are often operated on unpaved ground. In many cases, the ground is deformable; therefore, the deformation should be taken into consideration in order to assess the off-the-road performance of a tire. Recent progress in computational mechanics enabled us to simulate the large scale coupling problem, in which the deformation of tire structure and of surrounding medium can be interactively considered. Using this technology, hydroplaning phenomena and tire traction on snow have been predicted. In this paper, the simulation methodology of tire/soil coupling problems is developed for pneumatic tires of arbitrary tread patterns. The Finite Element Method (FEM) and the Finite Volume Method (FVM) are used for structural and for soil-flow analysis, respectively. The soil is modeled as an elastoplastic material with a specified yield criterion and a nonlinear elasticity. The material constants are referred to measurement data, so that the cone penetration resistance and the shear resistance are represented. Finally, the traction force of the tire in a cultivated field is predicted, and a good correlation with experiments is obtained.


Author(s):  
Gary Goertz ◽  
James Mahoney

Some in the social sciences argue that the same logic applies to both qualitative and quantitative research methods. This book demonstrates that these two paradigms constitute different cultures, each internally coherent yet marked by contrasting norms, practices, and toolkits. The book identifies and discusses major differences between these two traditions that touch nearly every aspect of social science research, including design, goals, causal effects and models, concepts and measurement, data analysis, and case selection. Although focused on the differences between qualitative and quantitative research, the book also seeks to promote toleration, exchange, and learning by enabling scholars to think beyond their own culture and see an alternative scientific worldview. The book is written in an easily accessible style and features a host of real-world examples to illustrate methodological points.


Sign in / Sign up

Export Citation Format

Share Document