scholarly journals Oblique convergence causes both thrust and strike-slip ruptures during the 2021 M 7.2 Haiti earthquake

2021 ◽  
Author(s):  
Ryo Okuwaki ◽  
Wenyuan Fan

A devastating magnitude 7.2 earthquake struck Southern Haiti on 14 August 2021. The earthquake caused severe damages and over 2000 casualties. Resolving the earthquake rupture process can provide critical insights into hazard mitigation. Here we use integrated seismological analyses to obtain the rupture history of the 2021 earthquake. We find the earthquake first broke a blind thrust fault and then jumped to a disconnected strike-slip fault. Neither of the fault configurations aligns with the left-lateral tectonic boundary between the Caribbean and North American plates. The complex multi-fault rupture may result from the oblique plate convergence in the region that the initial thrust rupture is due to the boundary-normal compression and the following strike-slip faulting originates from the Gonâve microplate block movement, orienting towards the SW-NE direction. The complex rupture development of the earthquake suggests that the regional deformation is accommodated by a network of segmented faults with diverse faulting conditions.

1983 ◽  
Vol 73 (6A) ◽  
pp. 1553-1583
Author(s):  
Stephen H. Hartzell ◽  
Thomas H. Heaton

Abstract A least-squares point-by-point inversion of strong ground motion and teleseismic body waves is used to infer the fault rupture history of the 1979 Imperial Valley, California, earthquake. The Imperial fault is represented by a plane embedded in a half-space where the elastic properties vary with depth. The inversion yields both the spatial and temporal variations in dislocation on the fault plane for both right-lateral strike-slip and normal dip-slip components of motion. Inversions are run for different fault dips and for both constant and variable rupture velocity models. Effects of different data sets are also investigated. Inversions are compared which use the strong ground motions alone, the teleseismic body waves alone, and simultaneously the strong ground motion and teleseismic records. The inversions are stabilized by adding both smoothing and positivity constraints. The moment is estimated to be 5.0 × 1025 dyne-cm and the fault dip 90° ± 5°. Dislocation in the hypocentral region south of the United States-Mexican border is relatively small and almost dies out near the border. Dislocation then increases sharply north of the border to a maximum of about 2 m under Interstate 8. Dipslip motion is minor compared to strike-slip motion and is concentrated in the sediments. The best-fitting constant rupture velocity is 80 per cent of the local shear-wave velocity. However, there is a suggestion that the rupture front accelerated from the hypocenter northward. The 1979 Imperial Valley earthquake can be characterized as a magnitude 5 earthquake at the hypocenter which then grew into or triggered a magnitude 6 earthquake north of the border.


1988 ◽  
Vol 125 (3) ◽  
pp. 301-306 ◽  
Author(s):  
I. Wilkinson ◽  
M. Smith

AbstractA detailed survey of the patterns of regional deformation in North Wales has revealed the presence of several discrete, linear zones of anomalous deformation. These zones are distinguished by atypical finite strain values, intense tight to isoclinal folding, non-axial planar cleavages and high metamorphic gradients. A history of prolonged tectonic activity along these zones is indicated by their influence on sedimentation and volcanism. It is proposed that these zones reflect the deformation of the Lower Palaeozoic cover above pre-existing basement fractures. These basement fractures form a framework which divides North Wales into a series of blocks and sub-blocks. The end-Caledonian deformation is explained by a transpression model dominated by SE-directed shear with minor components of strike-slip localized in these zones. The application of this model to other parts of the Welsh Basin is briefly considered.


Minerals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1245
Author(s):  
Magdalena Zielińska

The Grajcarek Unit of the Pieniny Klippen Belt (PKB), at the boundary between the Central (Inner) and Outer Carpathians, resulted from the convergence of the ALCAPA (the Alps–Carpathians–Pannonia) block and European plate. The strongly deformed slices of the Grajcarek Unit consist of Jurassic–Cretaceous sedimentary rocks associated with Late Cretaceous–Middle Palaeocene synorogenic wild-flysch, and sedimentary breccias with olistoliths. Maximum burial temperatures and burial depths were estimated based on vitrinite reflectance data. The vitrinite reflectance values were wide scattered through the Grajcarek sedimentary succession, especially in the flysch formations. This is attributed mainly to the depositional effects that affected the vitrinite evolution. The determined maximum burial temperatures were interpreted due to the regional compression controlled by tectonic burial coeval with thrusting and strike-slip faulting. The regional vitrinite reflectance variations might estimate cumulative displacement around the NNW–SSE and oriented the strike-slip Dunajec fault, which is a continuation of the deep fracture Kraków–Myszków fault zone.


Author(s):  
Paul Leon Göllner ◽  
Jan Oliver Eisermann ◽  
Catalina Balbis ◽  
Ivan A. Petrinovic ◽  
Ulrich Riller

AbstractThe Southern Andes are often viewed as a classic example for kinematic partitioning of oblique plate convergence into components of continental margin-parallel strike-slip and transverse shortening. In this regard, the Liquiñe-Ofqui Fault Zone, one of Earth’s most prominent intra-arc deformation zones, is believed to be the most important crustal discontinuity in the Southern Andes taking up margin-parallel dextral strike-slip. Recent structural studies, however, are at odds with this simple concept of kinematic partitioning, due to the presence of margin-oblique and a number of other margin-parallel intra-arc deformation zones. However, knowledge on the extent of such zones in the Southern Andes is still limited. Here, we document traces of prominent structural discontinuities (lineaments) from the Southern Andes between 39° S and 46° S. In combination with compiled low-temperature thermochronology data and interpolation of respective exhumation rates, we revisit the issue of kinematic partitioning in the Southern Andes. Exhumation rates are maximal in the central parts of the orogen and discontinuity traces, trending predominantly N–S, WNW–ESE and NE–SW, are distributed across the entire width of the orogen. Notably, discontinuities coincide spatially with large gradients in Neogene exhumation rates and separate crustal domains characterized by uniform exhumation. Collectively, these relationships point to significant components of vertical displacement on these discontinuities, in addition to horizontal displacements known from published structural studies. Our results agree with previously documented Neogene shortening in the Southern Andes and indicate orogen-scale transpression with maximal vertical extrusion of rocks in the center of the transpression zone. The lineament and thermochronology data call into question the traditional view of kinematic partitioning in the Southern Andes, in which deformation is focused on the Liquiñe-Ofqui Fault Zone.


2021 ◽  
Vol 13 (4) ◽  
pp. 685
Author(s):  
Marco Polcari ◽  
Mimmo Palano ◽  
Marco Moro

We evaluated the performances of different SAR-based techniques by analyzing the surface coseismic displacement related to the 2019 Ridgecrest seismic sequence (an Mw 6.4 foreshock on July 4th and an Mw 7.1 mainshock on July 6th) in the tectonic framework of the eastern California shear zone (Southern California, USA). To this end, we compared and validated the retrieved SAR-based coseismic displacement with the one estimated by a dense GNSS network, extensively covering the study area. All the SAR-based techniques constrained the surface fault rupture well; however, in comparison with the GNSS-based coseismic displacement, some significant differences were observed. InSAR data showed better performance than MAI and POT data by factors of about two and three, respectively, therefore confirming that InSAR is the most consolidated technique to map surface coseismic displacements. However, MAI and POT data made it possible to better constrain the azimuth displacement and to retrieve the surface rupture trace. Therefore, for cases of strike-slip earthquakes, all the techniques should be exploited to achieve a full synoptic view of the coseismic displacement field.


2021 ◽  
Author(s):  
Duna Roda-Boluda ◽  
Taylor Schildgen ◽  
Hella Wittmann-Oelze ◽  
Stefanie Tofelde ◽  
Aaron Bufe ◽  
...  

<p>The Southern Alps of New Zealand are the expression of the oblique convergence between the Pacific and Australian plates, which move at a relative velocity of nearly 40 mm/yr. This convergence is accommodated by the range-bounding Alpine Fault, with a strike-slip component of ~30-40 mm/yr, and a shortening component normal to the fault of ~8-10 mm/yr. While strike-slip rates seem to be fairly constant along the Alpine Fault, throw rates appear to vary considerably, and whether the locus of maximum exhumation is located near the fault, at the main drainage divide, or part-way between, is still debated. These uncertainties stem from very limited data characterizing vertical deformation rates along and across the Southern Alps. Thermochronology has constrained the Southern Alps exhumation history since the Miocene, but Quaternary exhumation is hard to resolve precisely due to the very high exhumation rates. Likewise, GPS surveys estimate a vertical uplift of ~5 mm/yr, but integrate only over ~10 yr timescales and are restricted to one transect across the range.</p><p>To obtain insights into the Quaternary distribution and rates of exhumation of the western Southern Alps, we use new <sup>10</sup>Be catchment-averaged erosion rates from 20 catchments along the western side of the range. Catchment-averaged erosion rates span an order of magnitude, between ~0.8 and >10 mm/yr, but we find that erosion rates of >10 mm/yr, a value often quoted in the literature as representative for the entire range, are very localized. Moreover, erosion rates decrease sharply north of the intersection with the Marlborough Fault System, suggesting substantial slip partitioning. These <sup>10</sup>Be catchment-averaged erosion rates integrate, on average, over the last ~300 yrs. Considering that the last earthquake on the Alpine Fault was in 1717, these rates are representative of inter-seismic erosion. Lake sedimentation rates and coseismic landslide modelling suggest that long-term (~10<sup>3</sup> yrs) erosion rates over a full seismic cycle could be ~40% greater than our inter-seismic erosion rates. If we assume steady state topography, such a scaling of our <sup>10</sup>Be erosion rate estimates can be used to estimate rock uplift rates in the Southern Alps. Finally, we find that erosion, and hence potentially exhumation, does not seem to be localized at a particular distance from the fault, as some tectonic and provenance studies have suggested. Instead, we find that superimposed on the primary tectonic control, there is an elevation/temperature control on erosion rates, which is probably transient and related to frost-cracking and glacial retreat.</p><p>Our results highlight the potential for <sup>10</sup>Be catchment-averaged erosion rates to provide insights into the magnitude and distribution of tectonic deformation rates, and the limitations that arise from transient erosion controls related to the seismic cycle and climate-modulated surface processes.</p><p> </p><p> </p>


Geology ◽  
2021 ◽  
Author(s):  
Minhee Choi ◽  
David W. Eaton ◽  
Eva Enkelmann

The Denali fault, a transcurrent fault system that extends from northwestern Canada across Alaska toward the Bering Sea, is partitioned into segments that exhibit variable levels of historical seismicity. A pair of earthquakes (M 6.2 and 6.3) on 1 May 2017, in proximity to the Eastern Denali fault (EDF), exhibited source mechanisms and stress conditions inconsistent with expectations for strike-slip fault activation. Precise relocation of ~1500 aftershocks revealed distinct fault strands that are oblique to the EDF. Calculated patterns of Coulomb stress show that the first earthquake likely triggered the second one. The EDF parallels the Fairweather transform, which separates the obliquely colliding Yakutat microplate from North America. In our model, inboard transfer of stress is deforming and shortening the mountainous region between the EDF and the Fairweather transform. This is supported by historical seismicity concentrated southwest of the EDF, suggesting that it now represents a structural boundary that controls regional deformation but is no longer an active fault.


GSA Today ◽  
2021 ◽  
Author(s):  
William McClelland ◽  
Justin Strauss ◽  
Maurice Copron ◽  
Jane Gilotti ◽  
Karol Faehnrich ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document