scholarly journals Analisis Penerapan Frame Work IDEAS Menggunakan Parameter PEI Guna Menentukan Rancangan Posisi Kerja Operator di CV. Nipson Industrial Coating

2020 ◽  
Vol 2 (1) ◽  
pp. 1-11
Author(s):  
Arnas Rizkia Hidayat ◽  
Ni Luh Putu Hariastuti
Keyword(s):  
Evaluation Index ◽  
Industrial Coating ◽  
Frame Work

Kinerja dari operator atau pekerja pada dasarnya mempengaruhi tingkat keoptimalan suatu pekerjaan.Seperti kondisi kerja, tempat kerja, dan postur kerja  yang menjadi faktor utama untuk melakukan suatu pekerjaan. Kenyamanan dan keselamatan kerja pada dasarnya akan dipengaruhi oleh faktor-faktor tersebut. Tingkat keamanan dan kenyamanan pekerja yang buruk salah satunya akan mengakibatkan musculoskeletal disordes (MSDs) berupa cidera otot urat syaraf, urat daging, tulang, persendian tulang, tulang rawan yang disebabkan oleh aktivitas kerja.Untuk menganalisis postur kerja adalah dengan menggunakan konsep ergonomi, metode yang digunakan dalam analisa ini adalah Framework IDEAS (Identify, Design, Evaluate, Adapt,Sustain) metode ini berisikan langkah-langkah dari awal sampai akhir bagaimana mengidentifikasi masalah antara pekerja dengan lingkungan kerjanya lalu dibuat pemecahan masalahnya. Dalam hal ini digunakan softwareJack 8.2 untuk menganalisis postur kerja yang ada dengan parameter PEI (Posture Evaluation Index). CV. Nipson Industrial Coating memiliki penilaian terhadap kenyamanan dan keselamatan operator dalam bekerja di ruang produksi CV. Nipson Industrial Coating, semua operator yang ada di ruang produksi pasti memiliki potensi bahaya dalam beraktivitas, dimana semakin besar nilai PEI (Posture Evaluation Index) maka akan semakin besar potensi bahayanya.Kata Kunci : Ergonomi, Frame Work IDEAS, PEI

Atomic orientation effects in proton stopping at low velocity

1983 ◽  
Vol 41 ◽  
pp. 708-709
Author(s):  
Kin Lam
Keyword(s):  
Polycrystalline Material ◽  
Charged Particles ◽  
Target Material ◽  
Stopping Power ◽  
Low Velocity ◽  
Electronic Density ◽  
Interatomic Distances ◽  
Frame Work ◽  
Image Position ◽  
Atomic Orientation

The energy of moving ions in solid is dependent on the electronic density as well as the atomic structural properties of the target material. These factors contribute to the observable effects in polycrystalline material using the scanning ion microscope. Here we outline a method to investigate the dependence of low velocity proton stopping on interatomic distances and orientations.The interaction of charged particles with atoms in the frame work of the Fermi gas model was proposed by Lindhard. For a system of atoms, the electronic Lindhard stopping power can be generalized to the formwhere the stopping power function is defined as

Comprehensive evaluation of kraft pulp properties from fast-growing woods

TAPPI Journal ◽  
2010 ◽  
Vol 9 (6) ◽  
pp. 34-39
Author(s):  
AIYU QU ◽  
YANHUI AO ◽  
JUN YAN ◽  
GUIGAN FANG
Keyword(s):  
Kraft Pulp ◽  
Comprehensive Evaluation ◽  
Evaluation Model ◽  
Evaluation Index System ◽  
Evaluation Index ◽  
Wood Cellulose ◽  
Fuzzy Matrix ◽  
Fast Growing ◽  
Pulp Properties ◽  
Evaluation Index Systems

To develop new wood cellulose resources and fast-growing pulpwood plantation fiber sources, it is very important to evaluate their pulping properties. A comprehensive multi-index pulping-suitability evaluation model is investigated in this paper by considering four fast-growing wood species. First, a new evaluation-index system for kraft pulp was developed based on traditional evaluation-index systems. Then, the membership degree of every index was analyzed to obtain a fuzzy matrix. The proportional contribution of each parameter to the main pulping properties could then be determined. Finally, a comprehensive evaluation model of kraft pulp properties was developed. The model is reliable compared with traditional assessment methods. The results confirmed the feasibility and rationality of developing new wood cellulose resources and fast-growing pulpwood plantations using fuzzy comprehensive evaluations.

A FRAME WORK FOR WEB INFORMATION EXTRACTION AND ANALYSIS

2013 ◽  
Vol 7 (2) ◽  
pp. 574-579 ◽  
Author(s):  
Dr Sunitha Abburu ◽  
G. Suresh Babu
Keyword(s):  
Information Extraction ◽  
Data Extraction ◽  
Research Work ◽  
Web Pages ◽  
Web Documents ◽  
E Learning ◽  
Structured Information ◽  
Frame Work ◽  
Effective Decision ◽  
The Web

Day by day the volume of information availability in the web is growing significantly. There are several data structures for information available in the web such as structured, semi-structured and unstructured. Majority of information in the web is presented in web pages. The information presented in web pages is semi-structured.  But the information required for a context are scattered in different web documents. It is difficult to analyze the large volumes of semi-structured information presented in the web pages and to make decisions based on the analysis. The current research work proposed a frame work for a system that extracts information from various sources and prepares reports based on the knowledge built from the analysis. This simplifies  data extraction, data consolidation, data analysis and decision making based on the information presented in the web pages.The proposed frame work integrates web crawling, information extraction and data mining technologies for better information analysis that helps in effective decision making.   It enables people and organizations to extract information from various sourses of web and to make an effective analysis on the extracted data for effective decision making.  The proposed frame work is applicable for any application domain. Manufacturing,sales,tourisum,e-learning are various application to menction few.The frame work is implemetnted and tested for the effectiveness of the proposed system and the results are promising.

Sign in / Sign up

Export Citation Format

Share Document