scholarly journals Assessment of the influence of the structural characteristics of granular systems of microsilicon on the properties of thermal insulation materials

2022 ◽  
Vol 320 (1) ◽  
pp. 5-14
Author(s):  
I.B. Sangulova ◽  
◽  
V.P. Selyaev ◽  
E.I. Kuldeev ◽  
R.E. Nurlybaev ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Granular Materials ◽  
Thermal Insulation ◽  
Structural Characteristics ◽  
Particle Surface ◽  
Experimental Studies ◽  
Granular Systems ◽  
Scattering Method ◽  
Gas Molecules

The article discusses experimental studies of the size and shape of structured particles of microsilica small angle x-ray scattering method and a photophonon theoretical description of the heat transfer process in complex heterogeneous structures to assessment of the structural characteristics of granular systems for the properties of thermal insulating materials. The mechanism of heat transfer in granular, porous systems is quite complex, since heat exchange occurs in a material consisting of two phases (solid and gas) and at the phase boundary. Heat transfer in liquid thermal insulation coatings can be carried out from one solid particle to another. In this case, the thermal conductivity will depend on: the chemical and elemental composition of the material; particle granulometry; surface topology - the presence of inhomogeneities, defects on the surface; the number of touches and the contact area between the particles. The heat transfer of gas in the pores is carried out when gas molecules collide. Thermal conductivity will be determined by the ratio of the free path of molecules and linear pore sizes, temperature and dynamic viscosity of the gas phase, the nature of the interaction of gas molecules with the solid phase. Heat transfer by radiation depends on the nature of the particles, the dielectric, magnetic permeability and the degree of blackness of the particle surface. Based on the analysis of possible mechanisms of heat transfer in granular systems, it can be argued that the effective thermal conductivity of the system depends, all other things being equal, on the structure of the pore space of granular materials, topology and the number of particle touches. Considering idealized models of the structure of granular materials in the form of ordered folds of perfectly smooth balls, we can obtain several variants of structures: with tetrahedral; hexagonal; cubic packing of balls.

scholarly journals Theoretical and experimental studies of effective thermal insulation in the production, storage and transportation of agricultural products

2020 ◽  
Vol 175 ◽  
pp. 11013
Author(s):  
Mikhail Lemeshko ◽  
Snanislav Maslennikov ◽  
Sergey Bashnyak ◽  
Irina Kokunko
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Insulation ◽  
New Technology ◽  
Experimental Studies ◽  
Sandwich Panels ◽  
Agricultural Products ◽  
The Cost ◽  
The Heat Transfer Coefficient ◽  
Very High

The article presents the results of research on a new technology for increasing the thermal insulation properties of fences based on sandwich panels for thermal insulation of buildings, storage facilities, cooling chambers, industrial and residential premises, as well as for the production, storage and transportation of agricultural products. The costs of cold and heat are reflected in the cost of agricultural products. The idea is to replace the air in the pores of mineral (basalt) wool with gas with low thermal conductivity. The article presents a theoretical analysis of the possible effectiveness of this substitution, and the developed research methodology. The analysis made it possible to predict a possible decrease in the heat transfer coefficient by about 21%. This is a very high indicator. It can be assumed that approximately this value can reduce the cost of electricity spent on maintaining rational temperatures. The scheme and description of the stand for experimental research, and the results of these studies are given. It was found that as a result of the conducted experiments, it was possible to obtain a decrease in the thermal conductivity of sandwich panels with argon by 8.8%, and with carbon dioxide by 10.2%.

Possible Mechanisms for Thermal Conductivity Enhancement in Nanofluids

2006 ◽  
Author(s):  
Amit Gupta ◽  
Xuan Wu ◽  
Ranganathan Kumar
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Brownian Motion ◽  
Brownian Dynamics ◽  
Lattice Vibration ◽  
Experimental Studies ◽  
High Heat ◽  
Conductivity Enhancement ◽  
High Heat Transfer ◽  
Dynamics Simulations

This study discusses the merits of various physical mechanisms that are responsible for enhancing the heat transfer in nanofluids. Experimental studies have cemented the claim that ‘seeding’ liquids with nanoparticles can increase the thermal conductivity of the nanofluid by up to 40% for metallic and oxide nanoparticles dispersed in a base liquid. Experiments have also shown that the rise in conductivity of the nanofluid is highly dependent on the size and concentration of the nanoparticles. On the theoretical side, traditional models like Maxwell or Hamilton-Crosser models cannot explain this unusually high heat transfer. Several mechanisms have been postulated in the literature such as Brownian motion, thermal diffusion in nanoparticles and thermal interaction of nanoparticles with the surrounding fluid, the formation of an ordered liquid layer on the surface of the nanoparticle and microconvection. This study concentrates on 3 possible mechanisms: Brownian dynamics, microconvection and lattice vibration of nanoparticles in the fluid. By considering two nanofluids, copper particles dispersed in ethylene glycol, and silica in water, it is determined that translational Brownian motion of the nanoparticles, presence of an interparticle potential and the microconvection heat transfer are mechanisms that play only a smaller role in the enhancement of thermal conductivity. On the other hand, the lattice vibrations, determined by molecular dynamics simulations show a great deal of promise in increasing the thermal conductivity by as much as 23%. In a simplistic sense, the lattice vibration can be regarded as a means to simulate the phononic transport from solid to liquid at the interface.

Quantitative Experimental Study of SiO2-Water Nanofluids on Backward-Facing Step Flow under Low Reynolds Number

2018 ◽  
Vol 916 ◽  
pp. 221-225
Author(s):  
Ji Zu Lv ◽  
Liang Yu Li ◽  
Cheng Zhi Hu ◽  
Min Li Bai ◽  
Sheng Nan Chang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Reynolds Number ◽  
Volume Fraction ◽  
Pure Water ◽  
Experimental Studies ◽  
Flow Characteristics ◽  
Thermal Engineering ◽  
Heat Transfer Medium ◽  
Step Flow

Nanofluids is an innovative study of nanotechnology applied to the traditional field of thermal engineering. It refers to the metal or non-metallic nanopowder was dispersed into water, alcohol, oil and other traditional heat transfer medium, to prepared as a new heat transfer medium with high thermal conductivity. The role of nanofluids in strengthening heat transfer has been confirmed by a large number of experimental studies. Its heat transfer mechanism is mainly divided into two aspects. On the one hand, the addition of nanoparticles enhances the thermal conductivity. On the other hand, due to the interaction between the nanoparticles and base fluid causing the changes in the flow characteristics, which is also the main factor affecting the heat transfer of nanofluids. Therefore, a intensive study on the flow characteristics of nanofluids will make the study of heat transfer more meaningful. In this experiment, the flow characteristics of SiO2-water nanofluids in two-dimensional backward step flow are quantitatively studied by PIV. The results show that under the same Reynolds number, the turbulence of nanofluids is larger than that of pure water. With the increase of nanofluids volume fraction, the flow characteristics are constantly changing. The quantitative analysis proved that the nanofluids disturbance was enhanced compared with the base liquid, which resulting in the heat transfer enhancement.

Effective Thermal Conductivity of Submicron Powders: A Numerical Study

2016 ◽  
Vol 846 ◽  
pp. 500-505
Author(s):  
Wei Jing Dai ◽  
Yi Xiang Gan ◽  
Dorian Hanaor
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Resistance ◽  
Effective Thermal Conductivity ◽  
Granular Materials ◽  
Gas Phase ◽  
Numerical Study ◽  
Transfer Model ◽  
Size Of Particles ◽  
Contact Unit

Effective thermal conductivity is an important property of granular materials in engineering applications and industrial processes, including the blending and mixing of powders, sintering of ceramics and refractory metals, and electrochemical interactions in fuel cells and Li-ion batteries. The thermo-mechanical properties of granular materials with macroscopic particle sizes (above 1 mm) have been investigated experimentally and theoretically, but knowledge remains limited for materials consisting of micro/nanosized grains. In this work we study the effective thermal conductivity of micro/nanopowders under varying conditions of mechanical stress and gas pressure via the discrete thermal resistance method. In this proposed method, a unit cell of contact structure is regarded as one thermal resistor. Thermal transport between two contacting particles and through the gas phase (including conduction in the gas phase and heat transfer of solid-gas interfaces) are the main mechanisms. Due to the small size of particles, the gas phase is limited to a small volume and a simplified gas heat transfer model is applied considering the Knudsen number. During loading, changes in the gas volume and the contact area between particles are simulated by the finite element method. The thermal resistance of one contact unit is calculated through the combination of the heat transfer mechanisms. A simplified relationship between effective thermal conductivity and loading pressure can be obtained by integrating the contact units of the compacted powders.

scholarly journals Change in Conductive–Radiative Heat Transfer Mechanism Forced by Graphite Microfiller in Expanded Polystyrene Thermal Insulation—Experimental and Simulated Investigations

Materials ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2626
Author(s):  
Aurelia Blazejczyk ◽  
Cezariusz Jastrzebski ◽  
Michał Wierzbicki
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Resistance ◽  
Thermal Insulation ◽  
Radiative Heat Transfer ◽  
Radiative Heat ◽  
Expanded Polystyrene ◽  
Transfer Mechanism ◽  
Total Thermal Conductivity ◽  
Heat Transfer Mechanism

This article introduces an innovative approach to the investigation of the conductive–radiative heat transfer mechanism in expanded polystyrene (EPS) thermal insulation at negligible convection. Closed-cell EPS foam (bulk density 14–17 kg·m−3) in the form of panels (of thickness 0.02–0.18 m) was tested with 1–15 µm graphite microparticles (GMP) at two different industrial concentrations (up to 4.3% of the EPS mass). A heat flow meter (HFM) was found to be precise enough to observe all thermal effects under study: the dependence of the total thermal conductivity on thickness, density, and GMP content, as well as the thermal resistance relative gain. An alternative explanation of the total thermal conductivity “thickness effect” is proposed. The conductive–radiative components of the total thermal conductivity were separated, by comparing measured (with and without Al-foil) and simulated (i.e., calculated based on data reported in the literature) results. This helps to elucidate why a small addition of GMP (below 4.3%) forces such an evident drop in total thermal conductivity, down to 0.03 W·m−1·K−1. As proposed, a physical cause is related to the change in mechanism of the heat transfer by conduction and radiation. The main accomplishment is discovering that the change forced by GMP in the polymer matrix thermal conduction may dominate the radiation change. Hence, the matrix conduction component change is considered to be the major cause of the observed drop in total thermal conductivity of EPS insulation. At the microscopic level of the molecules or chains (e.g., in polymers), significant differences observed in the intensity of Raman spectra and in the glass transition temperature increase on differential scanning calorimetry(DSC) thermograms, when comparing EPS foam with and without GMP, complementarily support the above statement. An additional practical achievement is finding the maximum thickness at which one may reduce the “grey” EPS insulating layer, with respect to “dotted” EPS at a required level of thermal resistance. In the case of the thickest (0.30 m) panels for a passive building, above 18% of thickness reduction is found to be possible.

scholarly journals The Influence of Different Facings of Polyisocyanurate Boards on Heat Transfer through the Wall Corners of Insulated Buildings

Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1991 ◽  
Author(s):  
Tomas Makaveckas ◽  
Raimondas Bliūdžius ◽  
Arūnas Burlingis
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Flux ◽  
Thermal Insulation ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Thermal Bridge ◽  
Thermal Bridges ◽  
The Impact ◽  
Heat Flow Meter

Polyisocyanurate (PIR) thermal insulation boards faced with carboard, plastic, aluminum, or multilayer facings are used for thermal insulation of buildings. Facing materials are selected according to the conditions of use of PIR products. At the corners of the building where these products are joined, facings can be in the direction of the heat flux movement and significantly increase heat transfer through the linear thermal bridge formed in the connection of PIR boards with facing of both walls. Analyzing the installation of PIR thermal insulation products on the walls of a building, the structural schemes of linear thermal bridges were created, numerical calculations of the heat transfer coefficients of the linear thermal bridges were performed, and the influence of various facings on the heat transfer through the thermal bridge was evaluated. Furthermore, an experimental measurement using a heat flow meter apparatus was performed in order to confirm the results obtained by numerical calculation. This study provides more understanding concerning the necessity to evaluate the impact of different thermal conductivity facings on the heat transfer through corners of buildings insulated with PIR boards.

scholarly journals DETERMINING OF PARAMETERS OF HEAT EXCHANGE FOR VAPORIZATION OF THE MIXED REFRIGERANT ON THE HIGH THERMAL CONDUCTIVITY SINTERED POWDER CAPILLARY-POROUS COATINGS

2018 ◽  
Vol 61 (1) ◽  
pp. 70-79 ◽  
Author(s):  
A. V. Ovsyannik ◽  
E. N. Makeeva
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Exchange ◽  
Experimental Studies ◽  
Nucleate Boiling ◽  
High Thermal Conductivity ◽  
Porous Coating ◽  
Transfer Coefficients ◽  
Porous Coatings ◽  
Wide Range

The results of experimental research of heat exchange under the nucleate boiling of refrigerants R404a, R407c and R410a on the tubes with capillary-porous coating are presented. Experimental studies were carried out with the aid of an experimental installation in conditions of a large volume at pressures of saturation pн = 0.9–1.4 MPa and densities of the heat flux q = 5–35 kW/m2. For the first time the criterion equation for the calculation of the intensity of heat transfer during evaporation of ozone safe refrigerants on surfaces with high thermal conductivity sintered capillary-porous coating was obtained. Experimental data are summarized satisfactorily in a wide range of parameters of the porous layer, i.e. the pressure (pн = 0.9–1.4 MPa) and heat loads (q = 5–35 kW/m2). The ratio makes us possible to calculate the heat transfer coefficients within ±20 %. The dependence can be used in engineering calculations of the characteristics of the heat exchangers of the evaporative type. The coefficient of heat transfer during boiling of refrigerants on the investigated surfaces with the sintered capillary-porous coating, 4 times higher than on a smooth one and 1.5 times higher than on the finned surface, that allows us to come to a conclusion about the advantage of porous coatings. Boiling in capillary-porous coating leads to a decrease in weight and size of the installations due to the heat exchange intensification and the size of the tubes smaller as compared to the size of the finned ones.

scholarly journals Heat Transfer using Nanofluid

2019 ◽  
Vol 9 (2) ◽  
pp. 3205-3211
Author(s):  
Jodh Singh ◽  
◽  
Munish Gupta ◽  
Rajesh Kumar ◽  
Harmesh Kumar ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Experimental Studies ◽  
X Ray Diffraction ◽  
Thermal Systems ◽  
Maximum Enhancement ◽  
X Ray ◽  
Weight Concentration ◽  
Size And Morphology ◽  
Size Of Particles

Latest trend of miniaturization of thermal systems, calls for the improvement in their efficiency. Nanofluid contains the nanoparticles having large surface area and improves the thermal efficiency. This enhancement is the function of different mechanisms and parameter. This paper explores the heat transfer nature of nanofluids by addressing the experimental studies available in literature and conducting an experimental study using water based Copper oxide nanofluids. Nanoparticles were characterized by X-ray diffraction analysis and Field Emission Scanning Electron Microscopy to confirm the material, size and morphology of the nanoparticles. Thermal conductivity analysis has been performed at 30˚C, 40˚Cand 50˚C with 0.1%,0.5% and 1% concentration by weight. Mechanism of agglomeration, concentration and size of particles are found to be more significant in affecting the heat transfer. The maximum enhancement of 22.9 % in thermal conductivity is found in case of 1% weight concentration nanofluids consisting of small size (20nm) nanoparticles at temperature of 50˚C.

scholarly journals To the determination of heat exchange conditions near the inner surface of walls with reflective thermal insulation from aluminium foil

2018 ◽  
Vol 196 ◽  
pp. 02035 ◽  
Author(s):  
Nina Umnyakova ◽  
Mikhail Gandzhuntsev
Keyword(s):  
Heat Transfer ◽  
Thermal Insulation ◽  
Experimental Studies ◽  
Building Envelope ◽  
Surface Radiation ◽  
Thermal Engineering ◽  
Transfer Coefficients ◽  
Concrete Wall ◽  
Heat Transfer Coefficients ◽  
Inner Surface

Materials with a low coefficient of surface radiation intensively reflect the radiant component of the heat flux and reduce heat losses through the building envelope. When designing building structures with reflective thermal insulation it is necessary to evaluate the efficiency of its application. However, at present there are no methods for calculating the value of thermal losses through external walls in the presence of reflective thermal insulation on internal surface of the wall, as well as there are no data on the values of heat transfer coefficients at the inner surface of building envelope with reflective thermal insulation. In this regard, in the climatic chambers of NIISF RAABS, complex thermal engineering studies were carried out. For this a cellular concrete wall 2,8 x1,2 m was put up into the chamber with reflective thermal insulation on the inner surface and without it. The obtained results of experimental studies, presented in the work, allowed obtaining numerical values of heat transfer coefficients at the inner surface of walls with reflective thermal insulation, and use the obtained data in further calculations.

MEASUREMENT OF THERMOPHYSICAL PROPERTIES OF FLEXIBLE THERMAL INSULATION

2021 ◽  
pp. 119-126
Author(s):  
A.V. Zuev ◽  
◽  
Yu.P. Zarichnyak ◽  
D.Ya. Barinov ◽  
L.L. Krasnov ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Capacity ◽  
Thermal Insulation ◽  
Thermophysical Properties ◽  
Fibrous Material ◽  
Sewing Thread ◽  
Silica Fibers ◽  
Porous Fibrous Material ◽  
Highly Porous

The paper presents the results of measuring thermal conductivity and heat capacity of a flexible thermal insulation. Flexible thermal insulation is a highly porous fibrous material, a construction that includes felt, covered on all sides with fabric. The whole structure is stitched with a thread. The fibrous core, fabric and sewing thread are composed of silica fibers. Thermal conductivity was measured by the stationary method on flat samples. The heat capacity was determined using a NT-1000 calorimeter. The calculation of heat transfer was carried out for the conditions characteristic of those in effect when the spacecraft entered the orbit.

Sign in / Sign up

Export Citation Format

Share Document