Präzisions-Forstwirtschaft – was ist das? | Precision forestry – what's that?

2007 ◽  
Vol 158 (8) ◽  
pp. 235-242 ◽  
Author(s):  
Hans Rudolf Heinimann
Keyword(s):  
Business Processes ◽  
Spatial Scales ◽  
Supply Chain Coordination ◽  
Sensor Technology ◽  
Small Scale ◽  
Soil Physics ◽  
Coordination Problem ◽  
Precision Engineering ◽  
Precision Forestry ◽  
And Control

The term «precision forestry» was first introduced and discussed at a conference in 2001. The aims of this paper are to explore the scientific roots of the precision concept, define «precision forestry», and sketch the challenges that the implementation of this new concept may present to practitioners, educators, and researchers. The term «precision» does not mean accuracy on a small scale, but instead refers to the concurrent coordination and control of processes at spatial scales between 1 m and 100 km. Precision strives for an automatic control of processes. Precision land use differs from precision engineering by the requirements of gathering,storing and managing spatio-temporal variability of site and vegetation parameters. Practitioners will be facing the challenge of designing holistic, standardized business processes that are valid for whole networks of firms,and that follow available standards (e.g., SCOR, WoodX). There is a need to educate and train forestry professionals in the areas of business process re-engineering, computer supported management of business transactions,methods of remote sensing, sensor technology and control theory. Researchers will face the challenge of integrating plant physiology, soil physics and production sciences and solving the supply chain coordination problem (SCCP).

scholarly journals Detecting marine hazardous substances and organisms: sensors for pollutants, toxins, and pathogens

Ocean Science ◽  
2009 ◽  
Vol 5 (3) ◽  
pp. 329-349 ◽  
Author(s):  
O. Zielinski ◽  
J. A. Busch ◽  
A. D. Cembella ◽  
K. L. Daly ◽  
J. Engelbrektsson ◽  
...  
Keyword(s):  
Real Time ◽  
Spatial Scales ◽  
High Sensitivity ◽  
Hazardous Substances ◽  
Sensor Technology ◽  
Small Scale ◽  
Natural Substances ◽  
Future Demands ◽  
New Sensors ◽  
Marine Hazards

Abstract. Marine environments are influenced by a wide diversity of anthropogenic and natural substances and organisms that may have adverse effects on human health and ecosystems. Real-time measurements of pollutants, toxins, and pathogens across a range of spatial scales are required to adequately monitor these hazards, manage the consequences, and to understand the processes governing their magnitude and distribution. Significant technological advancements have been made in recent years for the detection and analysis of such marine hazards. In particular, sensors deployed on a variety of mobile and fixed-point observing platforms provide a valuable means to assess hazards. In this review, we present state-of-the-art of sensor technology for the detection of harmful substances and organisms in the ocean. Sensors are classified by their adaptability to various platforms, addressing large, intermediate, or small areal scales. Current gaps and future demands are identified with an indication of the urgent need for new sensors to detect marine hazards at all scales in autonomous real-time mode. Progress in sensor technology is expected to depend on the development of small-scale sensor technologies with a high sensitivity and specificity towards target analytes or organisms. However, deployable systems must comply with platform requirements as these interconnect the three areal scales. Future developments will include the integration of existing methods into complex and operational sensing systems for a comprehensive strategy for long-term monitoring. The combination of sensor techniques on all scales will remain crucial for the demand of large spatial and temporal coverage.

scholarly journals Detecting marine hazardous substances and organisms: sensors for pollutants, toxins, and pathogens

2009 ◽  
Vol 6 (2) ◽  
pp. 953-1005 ◽  
Author(s):  
O. Zielinski ◽  
J. A. Busch ◽  
A. D. Cembella ◽  
K. L. Daly ◽  
J. Engelbrektsson ◽  
...  
Keyword(s):  
Real Time ◽  
Spatial Scales ◽  
High Sensitivity ◽  
Hazardous Substances ◽  
Sensor Technology ◽  
Small Scale ◽  
Natural Substances ◽  
Future Demands ◽  
New Sensors ◽  
Marine Hazards

Abstract. Marine environments are influenced by a wide diversity of anthropogenic and natural substances and organisms that may have adverse effects on human health and ecosystems. Real-time measurements of pollutants, toxins, and pathogens across a range of spatial scales are required to adequately monitor these hazards, manage the consequences, and to understand the processes governing their magnitude and distribution. Significant technological advancements have been made in recent years for the detection and analysis of such marine hazards. In particular, sensors deployed on a variety of mobile and fixed-point observing platforms provide a valuable means to assess hazards. In this review, we present state-of-the-art of sensor technology for the detection of harmful substances and organisms in the ocean. Sensors are classified by their adaptability to various platforms, addressing large, intermediate, or small areal scales. Current gaps and future demands are identified with an indication of the urgent need for new sensors to detect marine hazards at all scales in autonomous real-time mode. Progress in sensor technology is expected to depend on the development of small-scale sensor technologies with a high sensitivity and specificity towards target analytes or organisms. However, deployable systems must comply with platform requirements as these interconnect the three areal scales. Future developments will include the integration of existing methods into complex and operational sensing systems for a comprehensive strategy for long-term monitoring. The combination of sensor techniques on all scales will remain crucial for the demand of large spatial and temporal coverage.

The Artificial Pancreas in Cyborg Bodies

2020 ◽  
pp. 412-430
Author(s):  
Anthony Ryan Hatch ◽  
Julia T. Gordon ◽  
Sonya R. Sternlieb
Keyword(s):  
Glucose Sensor ◽  
Social Inequalities ◽  
Infusion Pump ◽  
Artificial Pancreas ◽  
Small Scale ◽  
Glucose Levels ◽  
Loop Design ◽  
Access To Health ◽  
Do It Yourself ◽  
And Control

The new artificial pancreas system includes a body-attached blood glucose sensor that tracks glucose levels, a worn insulin infusion pump that communicates with the sensor, and features new software that integrates the two systems. The artificial pancreas is purportedly revolutionary because of its closed-loop design, which means that the machine can give insulin without direct patient intervention. It can read a blood sugar and administer insulin based on an algorithm. But, the hardware for the corporate artificial pancreas is expensive and its software code is closed-access. Yet, well-educated, tech-savvy diabetics have been fashioning their own fully automated do-it-yourself (DIY) artificial pancreases for years, relying on small-scale manufacturing, open-source software, and inventive repurposing of corporate hardware. In this chapter, we trace the corporate and DIY artificial pancreases as they grapple with issues of design and accessibility in a content where not everyone can become a diabetic cyborg. The corporate artificial pancreas offers the cyborg low levels of agency and no ownership and control over his or her own data; it also requires access to health insurance in order to procure and use the technology. The DIY artificial pancreas offers patients a more robust of agency but also requires high levels of intellectual capital to hack the devices and make the system work safely. We argue that efforts to increase agency, radically democratize biotechnology, and expand information ownership in the DIY movement are characterized by ideologies and social inequalities that also define corporate pathways.

Miniature Bioreactors for Rapid Bioprocess Development of Mammalian Cell Culture

2012 ◽  
Vol 59 (1) ◽  
Author(s):  
Mohd Helmi Sani ◽  
Frank Baganz
Keyword(s):  
Cell Culture ◽  
Mammalian Cell ◽  
Process Development ◽  
Mammalian Cell Culture ◽  
Small Scale ◽  
Cell Culture Process ◽  
Deep Wells ◽  
Working Volume ◽  
Culture Process ◽  
And Control

At present, there are a number of commercial small scale shaken systems available on the market with instrumented controllable microbioreactors such as Micro–24 Microreactor System (Pall Corporation, Port Washington, NY) and M2P Biolector, (M2P Labs GmbH, Aachen, Germany). The Micro–24 system is basically an orbital shaken 24–well plate that operates at working volume 3 – 7 mL with 24 independent reactors (deep wells, shaken and sparged) running simultaneously. Each reactor is designed as single use reactor that has the ability to continuously monitor and control the pH, DO and temperature. The reactor aeration is supplied by sparging air from gas feeds that can be controlled individually. Furthermore, pH can be controlled by gas sparging using either dilute ammonia or carbon dioxide directly into the culture medium through a membrane at the bottom of each reactor. Chen et al., (2009) evaluated the Micro–24 system for the mammalian cell culture process development and found the Micro–24 system is suitable as scaledown tool for cell culture application. The result showed that intra-well reproducibility, cell growth, metabolites profiles and protein titres were scalable with 2 L bioreactors.

scholarly journals Dispersal and Land Cover Contribute to Pseudorabies Virus Exposure in Invasive Wild Pigs

EcoHealth ◽  
2021 ◽  
Author(s):  
Felipe A. Hernández ◽  
Amanda N. Carr ◽  
Michael P. Milleson ◽  
Hunter R. Merrill ◽  
Michael L. Avery ◽  
...  
Keyword(s):  
Land Cover ◽  
Disease Transmission ◽  
Wildlife Conservation ◽  
Pseudorabies Virus ◽  
Spatial Scales ◽  
Information Criterion ◽  
Small Scale ◽  
Wild Pigs ◽  
Bacterial Agent ◽  
Open Canopy

AbstractWe investigated the landscape epidemiology of a globally distributed mammal, the wild pig (Sus scrofa), in Florida (U.S.), where it is considered an invasive species and reservoir to pathogens that impact the health of people, domestic animals, and wildlife. Specifically, we tested the hypothesis that two commonly cited factors in disease transmission, connectivity among populations and abundant resources, would increase the likelihood of exposure to both pseudorabies virus (PrV) and Brucella spp. (bacterial agent of brucellosis) in wild pigs across the Kissimmee Valley of Florida. Using DNA from 348 wild pigs and sera from 320 individuals at 24 sites, we employed population genetic techniques to infer individual dispersal, and an Akaike information criterion framework to compare candidate logistic regression models that incorporated both dispersal and land cover composition. Our findings suggested that recent dispersal conferred higher odds of exposure to PrV, but not Brucella spp., among wild pigs throughout the Kissimmee Valley region. Odds of exposure also increased in association with agriculture and open canopy pine, prairie, and scrub habitats, likely because of highly localized resources within those land cover types. Because the effect of open canopy on PrV exposure reversed when agricultural cover was available, we suggest that small-scale resource distribution may be more important than overall resource abundance. Our results underscore the importance of studying and managing disease dynamics through multiple processes and spatial scales, particularly for non-native pathogens that threaten wildlife conservation, economy, and public health.

scholarly journals Integration of Business Processes With Activities and Information: Evidence From Brazil

SAGE Open ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 215824402110061
Author(s):  
Ana Maria Magalhães Correia ◽  
Clarissa Figueredo Rocha ◽  
Luiz Carlos Duclós ◽  
Claudimar Pereira da Veiga
Keyword(s):  
Information Systems ◽  
Enterprise Architecture ◽  
Business Processes ◽  
Information Architecture ◽  
Management Model ◽  
Science Parks ◽  
Specific Nature ◽  
Architecture Frameworks ◽  
And Control ◽  
The Relationship

This study proposes a management model by business processes for science parks based on the premises and concept of enterprise architecture (EA). The model offers integrating business processes with activities and information that can be generated by adopting customized information systems to meet the science parks’ needs. The proposed model’s main contributions included EA as a means for shaping and enabling reconfiguration through descriptions of the structures of business processes and information systems that connect these structures, forming business and information architecture frameworks. In association with these frameworks, the managers need to define a coherent set of patterns, policies, procedures, and principles that sustain the business processes integrated with the information systems. As a result of the study, this model can help management execute and control activities related to business processes in the parks through interaction and alignment with the information system intended to facilitate the execution. The model will also lead to greater agility and efficiency in these business processes, considering their specific nature and the relationship with the parks’ actors. As a practical contribution, knowledge of these processes aids the management of the parks in their drive for a competitive advantage by maintaining and developing their management models.

scholarly journals FORMULATION OF THE HEAT CONDUCTION EQUATION FOR HETEROGENEOUS MEDIA WITH MULTIPLE SPATIAL SCALES USING REITERATED HOMOGENIZATION

2016 ◽  
Vol 15 (1) ◽  
pp. 96
Author(s):  
E. Iglesias-Rodríguez ◽  
M. E. Cruz ◽  
J. Bravo-Castillero ◽  
R. Guinovart-Díaz ◽  
R. Rodríguez-Ramos ◽  
...  
Keyword(s):  
Heat Conduction ◽  
Small Parameter ◽  
Heat Conduction Equation ◽  
Heterogeneous Media ◽  
Spatial Scales ◽  
Conduction Equation ◽  
Small Scale ◽  
Multiple Spatial Scales ◽  
Effective Coefficients ◽  
Reiterated Homogenization

Heterogeneous media with multiple spatial scales are finding increased importance in engineering. An example might be a large scale, otherwise homogeneous medium filled with dispersed small-scale particles that form aggregate structures at an intermediate scale. The objective in this paper is to formulate the strong-form Fourier heat conduction equation for such media using the method of reiterated homogenization. The phases are assumed to have a perfect thermal contact at the interface. The ratio of two successive length scales of the medium is a constant small parameter ε. The method is an up-scaling procedure that writes the temperature field as an asymptotic multiple-scale expansion in powers of the small parameter ε . The technique leads to two pairs of local and homogenized equations, linked by effective coefficients. In this manner the medium behavior at the smallest scales is seen to affect the macroscale behavior, which is the main interest in engineering. To facilitate the physical understanding of the formulation, an analytical solution is obtained for the heat conduction equation in a functionally graded material (FGM). The approach presented here may serve as a basis for future efforts to numerically compute effective properties of heterogeneous media with multiple spatial scales.

scholarly journals A low-cost technique to measure bank erosion proces ses along middle-size river reaches

2018 ◽  
Author(s):  
Gonzalo Duró ◽  
Alessandra Crosato ◽  
Maarten G. Kleinhans ◽  
Wim S. J. Uijttewaal
Keyword(s):  
Laser Scanning ◽  
Spatial Scales ◽  
Low Cost ◽  
Bank Erosion ◽  
Water Levels ◽  
Small Scale ◽  
Observation Distance ◽  
River Bank ◽  
Erosion Processes ◽  
Rtk Gps

Abstract. Diverse methods are currently available to measure river bank erosion at broad-ranging temporal and spatial scales. Yet, no technique provides low-cost and high-resolution to survey small-scale bank processes along a river reach. We investigate the capabilities of Structure-from-Motion photogrammetry applied with imagery from an Unmanned Aerial Vehicle (UAV) to describe the evolution of riverbank profiles in middle-size rivers. The bank erosion cycle is used as a reference to assess the applicability of different techniques. We surveyed 1.2 km of a restored bank of the Meuse River eight times within a year, combining different photograph perspectives and overlaps to identify an efficient UAV flight to monitor banks. The accuracy of the Digital Surface Models (DSMs) was evaluated compared with RTK GPS points and an Airborne Laser Scanning (ALS) of the whole reach. An oblique perspective with eight photo overlaps was sufficient to achieve the highest relative precision to observation distance of ~1:1400, with 10 cm error range. A complementary nadiral view increased coverage behind bank toe vegetation. The DSM and ALS had comparable accuracies except on banks, where the latter overestimates elevations. Sequential DSMs captured signatures of the erosion cycle such as mass failures, slump-block deposition, and bank undermining. Although this technique requires low water levels and banks without dense vegetation, it is a low-cost method to survey reach-scale riverbanks in sufficient resolution to quantify bank retreat and identify morphological features of the bank failure and erosion processes.

Terrain Adaptive Vehicles

1995 ◽  
Vol 117 (B) ◽  
pp. 107-112 ◽  
Author(s):  
K. J. Waldron
Keyword(s):  
Reference List ◽  
Central Feature ◽  
Coordination Problem ◽  
Technical Problems ◽  
Vehicle Type ◽  
Variable Configuration ◽  
And Control ◽  
Wheeled Vehicles ◽  
Coordination And Control ◽  
Principal Elements

Research on walking vehicles and variable configuration wheeled vehicles is reviewed. The central feature of the vehicles discussed is terrain adaptive capability. The principal elements of the technical problems of coordination and control are discussed for each vehicle type. Examples of each vehicle type are discussed and an extensive reference list is provided. Although the article is primarily a review article, it contains a new discussion of the coordination problem of robotic mechanisms.

Sign in / Sign up

Export Citation Format

Share Document