Local stability of concrete arch bridge based on Ritz method

2021 ◽  
pp. 1-16
Author(s):  
Jiansheng Tong ◽  
Zhengyuan Lin ◽  
Qian Zhou
Keyword(s):  
Ritz Method ◽  
Local Buckling ◽  
New Method ◽  
Radius Of Gyration ◽  
Limit Values ◽  
Arch Bridge ◽  
Finite Element Software ◽  
Equivalent Strut ◽  
Thin Walled ◽  
Arch Bridges

In order to minimize the self-weight and prevent local buckling failure of thin-walled box concrete arch bridges at the same time, the limit values of width-thickness ratios are deduced based on Ritz method and equivalent strut theory of arch bridge. A new method of determining sectional forms based on the limit values of width-thickness ratios is put forward. Based on Mupeng bridge, the theoretical results are verified by finite element software ANSYS. Results show that the limits of width-thickness ratios are related to concrete grade, equivalent calculation length and radius of gyration, the allowable minimum thickness of Mupeng bridge is 15 cm to avoid local buckling. The limit values of width-thickness ratios deduced in this paper are reasonable and this new method of determining sectional forms is simple and rational to apply in engineering. A scientific engineering calculation method on arch ring design is put forward and it can provide a theoretical basis for the design of thin-walled box concrete arch bridges constructed by cantilever pouring.

Analysis on In-Plane and Out-Plane Instability Coupling of Steel Bowstring Arch Bridge with Box Section Single Rib

2013 ◽  
Vol 790 ◽  
pp. 337-340
Author(s):  
Xing Rui Wang ◽  
Ji Kai Jin ◽  
Gang Yang
Keyword(s):  
Large Scale ◽  
Secondary Development ◽  
Instability Mode ◽  
Dead Weight ◽  
Arch Bridge ◽  
Box Section ◽  
Finite Element Software ◽  
Breadth Ratio ◽  
Arch Bridges ◽  
The Stability

Steel single rib box section arch bridge is established on the basis of secondary development using parametric language of large-scale finite element software ANSYS. On the premise of same sectional area A of arch rib,height breadth ratio h/b is changed, and both the spatial instability mode under the condition of arch bridges dead weight and the stability safety coefficient under the condition of the first step instability mode is calculated. With the aim to optimize distribution of stiffness and stability of single rib arch bridge, the target is to find out a height breadth ratio h/b which can make in-plane and out-plane instability mode coupling, that is to say, equivalent stiffness of in-plane and out-plane of the mode.

Study on the Vehicle-Bridge Coupling Vibration of Steel Arch Bridge

2010 ◽  
Vol 163-167 ◽  
pp. 233-238
Author(s):  
Zi Lin Li ◽  
Pei Yuan Zhou ◽  
Zhen Bo Yun
Keyword(s):  
Test Results ◽  
Coupling Vibration ◽  
Vibration Period ◽  
Dynamic Displacement ◽  
Arch Bridge ◽  
Finite Element Software ◽  
Long Span ◽  
Data Processing Software ◽  
New Type ◽  
Arch Bridges

The modal analysis and the calculation of dynamic response of the Fenghua Bridge, a new type of long-span steel arch bridge, are carried out using the finite element software ANSYS. Through the on-site testing, the vibration frequency and the change of dynamic displacement response with different weight and speeds are obtained by the DASP data processing software. It is found that the field test results are in consistent with the theoretical results. Firstly, the natural vibration period is 2 ~ 3 times longer than the other ordinary arch bridges, which indicate the bridge structure is stable; Secondly, the dynamic displacement of bridge deck changes in the same direction with weight, while in the opposite direction with speed, and the maximum appears on the midpoint of the middle span; Finally, the maximum dynamic displacement is 11.41mm, which doesn’t exceed the allowable value. So it can be concluded that the bridge is safe under the vehicle-bridge coupling vibration.

ELASTIC BUCKLING OF THIN-WALLED CIRCULAR TUBES CONTAINING AN ELASTIC INFILL

2006 ◽  
Vol 06 (04) ◽  
pp. 457-474 ◽  
Author(s):  
M. A. BRADFORD ◽  
A. ROUFEGARINEJAD ◽  
Z. VRCELJ
Keyword(s):  
Axial Compression ◽  
A Priori ◽  
Local Buckling ◽  
Steel Tube ◽  
Transcendental Equation ◽  
Buckling Mode ◽  
Buckling Stress ◽  
Elastic Tubes ◽  
Thin Walled ◽  
Energy Formulation

Circular thin-walled elastic tubes under concentric axial loading usually fail by shell buckling, and in practical design procedures the buckling load can be determined by modifying the local buckling stress to account empirically for the imperfection sensitive response that is typical in Donnell shell theory. While the local buckling stress of a hollow thin-walled tube under concentric axial compression has a solution in closed form, that of a thin-walled circular tube with an elastic infill, which restrains the local buckling mode, has received far less attention. This paper addresses the local buckling of a tubular member subjected to axial compression, and formulates an energy-based technique for determining the local buckling stress as a function of the stiffness of the elastic infill by recourse to a transcendental equation. This simple energy formulation, with one degree of buckling freedom, shows that the elastic local buckling stress increases from 1 to [Formula: see text] times that of a hollow tube as the stiffness of the elastic infill increases from zero to infinity; the latter case being typical of that of a concrete-filled steel tube. The energy formulation is then recast into a multi-degree of freedom matrix stiffness format, in which the function for the buckling mode is a Fourier representation satisfying, a priori, the necessary kinematic condition that the buckling deformation vanishes at the point where it enters the elastic medium. The solution is shown to converge rapidly, and demonstrates that the simple transcendental formulation provides a sufficiently accurate representation of the buckling problem.

scholarly journals Refined Finite Element Analysis of Crack Causes in SRC Arch Rib Bridges considering Multiple Factors

2018 ◽  
Vol 2018 ◽  
pp. 1-9
Author(s):  
Mengsheng Yu ◽  
Nianchun Deng ◽  
Qifeng Chen ◽  
Tianzhi Hao
Keyword(s):  
Steel Frame ◽  
Element Analysis ◽  
Shrinkage Temperature ◽  
Arch Bridge ◽  
Temperature Changes ◽  
Concrete Shrinkage ◽  
Shrinkage Process ◽  
Crack Problems ◽  
Arch Bridges ◽  
Bearing Structure

The SRC (steel-frame reinforced concrete) arch bridge is an important part of the development of arch bridges. Scholars worldwide have studied it from various aspects because of its stronger stiffness and stability than other types of bridges especially when crossing the canyon. The steel frame is a stress bracket during construction. Concrete becomes the main axial-pressure bearing structure when it fills the inner pipe and the encased frame. This article mainly focuses on the crack problems of SRC arch bridging during the postconstruction operation, local model of the midspan arch rib, and the equivalent relationship between the coefficient of expansion and the temperature of concrete. This study uses a cooling method to simulate the shrinkage process with detailed analysis of three properties including concrete shrinkage, temperature gradients, and concentrated hanger rod force. It is concluded that the SRC arch bridge will have large tensile stress on both inner and outer surfaces of slab and web when the temperature changes, and it is the main cause of cracks. The results agree well with measured data. At last, we come up with some reference suggestions in the design and construction of similar bridges in the future.

scholarly journals Stiffness of Concrete-Filled Thin-Walled Steel Tubular Slender Columns

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Alireza Bahrami ◽  
Ali Mahmoudi Kouhi
Keyword(s):  
Uniform Distribution ◽  
Experimental Tests ◽  
Simulation Method ◽  
Steel Tube ◽  
Initial Stiffness ◽  
Cross Sectional ◽  
Circular Column ◽  
Finite Element Software ◽  
Thin Walled ◽  
Slender Columns

Abstract Concrete-filled thin-walled steel tubular slender columns are studied in this paper to evaluate their stiffness. The slender columns have various steel tube thicknesses, length/diameter (width) ratios, and concrete compressive strengths. The columns are loaded by axial and eccentric loads. Two experimental tests of the slender and stub columns are described. Also, the finite element software ABAQUS is utilised to simulate and analyse the columns. The tested columns are simulated taking into account all their features in the tests to verify the simulation of the columns. The simulation results are compared with the tests results which reveal that good agreements exist between them. Thus, the proposed simulation method of the columns is verified. In order to assess the stiffness of the columns under different conditions, various load eccentricities (0 mm, 25 mm, and 50 mm), cross-sectional configurations (circular, rectangular, and square), and steel tube thicknesses (2 mm, 3.35 mm, and 5 mm) are adopted for the developed columns. The columns are simulated and analysed based on the verified simulation method considering the mentioned conditions. As a conclusion, the stiffness of the columns is generally reduced by the increase of the load eccentricity from 0 mm to 25 mm and 50 mm. Further, more uniform distribution of the stiffness is witnessed for the columns with lower eccentricities. In addition, the enhancement of the load eccentricity increased the reduction slope of the stiffness graph for the columns. Although the initial stiffness of the circular column is slightly lower than the rectangular and square columns, the stiffness has more uniform distribution which is preferred. Larger stiffness is achieved for the columns by increasing the steel tube thickness from 2 mm to 3.35 mm and 5 mm.

Novel Hanger Design to Improve the Robustness of Through Arch Bridges

2011 ◽  
Vol 90-93 ◽  
pp. 862-868
Author(s):  
Qi Ming Wu ◽  
Dang Qi Yang ◽  
Fei Cui ◽  
Xiao Wei Yi ◽  
Rui Juan Jiang
Keyword(s):  
Progressive Collapse ◽  
Time History ◽  
Structural Members ◽  
New Approach ◽  
Arch Bridge ◽  
Structural Robustness ◽  
Arch Bridges ◽  
Dynamic Time ◽  
The Impact ◽  
Emergency Measures

Hangers in through arch bridges are important components since they suspend the bridge deck from the arch ribs. Local damage at a hanger may lead to progressive damage of various components in the arch bridge or even progressive collapse of the bridge. In this paper, the conventional design of double-hangers in through arch bridges is reviewed. Then a new approach to design the double-hangers is put forward. The suitability and robustness of this approach is then verified by a numerical simulation of a real through arch bridge. The impact effects induced by local hanger fracture on other structural members are simulated by dynamic time-history analyses. The new approach to design the hangers for through arch bridges is shown to improve the structural robustness. With the application of the new way put forward here, when one or more hangers are damaged to fail, the through arch bridge will not be endangered and will still maintain the overall load-bearing capacity during an appropriate length of time to allow necessary emergency measures to be taken, which illustrates the leading principle of structural robustness well.

Study on Reliability Evaluation Method of Existing CFST Arch Bridge

2012 ◽  
Vol 226-228 ◽  
pp. 1679-1682
Author(s):  
Yi Song Zou ◽  
Hai Tao Hou ◽  
Wei Peng
Keyword(s):  
System Reliability ◽  
Reliability Index ◽  
Evaluation Method ◽  
Reliability Assessment ◽  
Steel Tube ◽  
Arch Bridge ◽  
Cfst Arch Bridge ◽  
Arch Bridges ◽  
Grading Standards ◽  
Bridge System

Based on reliability theory, the application calculation method of Concrete Filled Steel Tube (CFST) arch bridge system reliability index is studied. Select the most unfavorable load distribution in working condition of maximum moment and deflection at the mid-span, from the angle of strain energy, calculated the weights of CFST arch ribs component. On the basis of the grading standards of reliability assessment of the existing bridge components and the critical structures, CFST arch bridge system reliability assessment grading standards are constructed. CFST arch bridges reliability index are evaluated from two aspects (the arch ribs and segment) in this article. As the CFST arch bridge locates in the marine environment, corrosion environment is the serious level of C5-M, steel pipe corrosion is the major diseases of CFST, arch rib which on the corrosion conditions were assessed. The results show that the method can effectively assess the situation of CFST arch bridge.

scholarly journals Research on Compression Behavior of Square Thin-Walled CFST Columns with Steel-Bar Stiffeners

2018 ◽  
Vol 8 (9) ◽  
pp. 1602 ◽  
Author(s):  
Zhao Yang ◽  
Chengxiang Xu
Keyword(s):  
Bearing Capacity ◽  
Local Buckling ◽  
Steel Tube ◽  
Steel Tubes ◽  
Compression Behavior ◽  
Steel Bar ◽  
Steel Bars ◽  
Thin Walled ◽  
Structural Measure ◽  
Cfst Columns

Local buckling in steel tubes was observed to be capable of reducing the ultimate loads of thin-walled concrete-filled steel-tube (CFST) columns under axial compression. To strengthen the steel tubes, steel bars were proposed in this paper to be used as stiffeners fixed onto the tubes. Static-loading tests were conducted to study the compression behavior of square thin-walled CFST columns with steel bar stiffeners placed inside or outside the tube. The effect and feasibility of steel bar stiffeners were studied through the analysis of failure mode, load–displacement relationship, ultimate load, ductility, and local buckling. Different setting methods of steel bars were compared as well. The results showed that steel-bar stiffeners proposed in this paper can be effective in delaying local buckling as well as increasing the bearing capacity of the columns, but will decrease the ductility of the columns. In order to obtain a higher bearing capacity of columns, steel bars with low stiffness should be placed inside and steel bars with high stiffness should be placed outside of the steel tubes. The study is helpful in providing reference to the popularization and application of this new structural measure to avoid or delay the local buckling of thin-walled CFST columns.

scholarly journals Buckling Analysis and Section Optimum for Square Thin-Wall CFST Columns Sealed by Self-Tapping Screws

2019 ◽  
Vol 2019 ◽  
pp. 1-14
Author(s):  
He Zhang ◽  
Kai Wu ◽  
Chao Xu ◽  
Lijian Ren ◽  
Feng Chen
Keyword(s):  
Bearing Capacity ◽  
Failure Modes ◽  
Steel Plate ◽  
Local Buckling ◽  
Steel Tube ◽  
Thin Wall ◽  
Type Section ◽  
Plate Buckling ◽  
Thin Walled ◽  
Cfst Columns

Two columns of thin-walled concrete-filled steel tubes (CFSTs), in which tube seams are connected by self-tapping screws, are axial compression tested and FEM simulated; the influence of local buckling on the column compression bearing capacity is discussed. Failure modes of square thin-wall CFST columns are, first, steel tube plate buckling and then the collapse of steel and concrete in some corner edge areas. Interaction between concrete and steel makes the column continue to withstand higher forces after buckling appears. A large deflection analysis for tube elastic buckling reflects that equivalent uniform stress of the steel plate in the buckling area can reach yield stress and that steel can supply enough designing stress. Aiming at failure modes of square thin-walled CFST columns, a B-type section is proposed as an improvement scheme. Comparing the analysis results, the B-type section can address both the problems of corner collapse and steel plate buckling. This new type section can better make full use of the stress of the concrete material and the steel material; this type section can also increase the compression bearing capacity of the column.

Sign in / Sign up

Export Citation Format

Share Document