Fuzzy logic-based connected robot for home rehabilitation

2021 ◽  
pp. 1-16
Author(s):  
Yassine Bouteraa ◽  
Ismail Ben Abdallah ◽  
Atef Ibrahim ◽  
Tariq Ahamed Ahanger
Keyword(s):  
Muscle Contraction ◽  
Vision System ◽  
Current Sensor ◽  
State Of Health ◽  
Computer Vision System ◽  
Rehabilitation Process ◽  
Emg Signal ◽  
Sensor Current ◽  
Machine Interface ◽  
A Current

In this paper, a robotic system dedicated to remote wrist rehabilitation is proposed as an Internet of Things (IoT) application. The system offers patients home rehabilitation. Since the physiotherapist and the patient are on different sites, the system guarantees that the physiotherapist controls and supervises the rehabilitation process and that the patient repeats the same gestures made by the physiotherapist. A human-machine interface (HMI) has been developed to allow the physiotherapist to remotely control the robot and supervise the rehabilitation process. Based on a computer vision system, physiotherapist gestures are sent to the robot in the form of control instructions. Wrist range of motion (RoM), EMG signal, sensor current measurement, and streaming from the patient’s environment are returned to the control station. The various acquired data are displayed in the HMI and recorded in its database, which allows later monitoring of the patient’s progress. During the rehabilitation process, the developed system makes it possible to follow the muscle contraction thanks to an extraction of the Electromyography (EMG) signal as well as the patient’s resistance thanks to a feedback from a current sensor. Feature extraction algorithms are implemented to transform the EMG raw signal into a relevant data reflecting the muscle contraction. The solution incorporates a cascade fuzzy-based decision system to indicate the patient’s pain. As measurement safety, when the pain exceeds a certain threshold, the robot should stop the action even if the desired angle is not yet reached. Information on the patient, the evolution of his state of health and the activities followed, are all recorded, which makes it possible to provide an electronic health record. Experiments on 3 different subjects showed the effectiveness of the developed robotic solution.

Colour assessment of milk and milk products using computer vision system and colorimeter

2021 ◽  
pp. 105084
Author(s):  
Bojana Milovanovic ◽  
Ilija Djekic ◽  
Jelena Miocinovic ◽  
Bartosz G. Solowiej ◽  
Jose M. Lorenzo ◽  
...  
Keyword(s):  
Computer Vision ◽  
Vision System ◽  
Computer Vision System ◽  
Milk Products

A Current Sensor Based on Capillary Microresonator Filled With Terfenol-D Nanoparticles

2021 ◽  
Vol 33 (5) ◽  
pp. 239-242
Author(s):  
Chang-Qiu Yu ◽  
Rui Niu ◽  
Zhong-Di Peng ◽  
Hai Li ◽  
Yong-Ming Luo ◽  
...  
Keyword(s):  
Current Sensor ◽  
A Current

scholarly journals An Automated Light Trap to Monitor Moths (Lepidoptera) Using Computer Vision-Based Tracking and Deep Learning

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 343
Author(s):  
Kim Bjerge ◽  
Jakob Bonde Nielsen ◽  
Martin Videbæk Sepstrup ◽  
Flemming Helsing-Nielsen ◽  
Toke Thomas Høye
Keyword(s):  
Computer Vision ◽  
Deep Learning ◽  
Vision System ◽  
Low Cost ◽  
Light Trap ◽  
Automatic Monitoring ◽  
Light Sources ◽  
Monitoring Methods ◽  
Computer Vision System ◽  
Substantial Investment

Insect monitoring methods are typically very time-consuming and involve substantial investment in species identification following manual trapping in the field. Insect traps are often only serviced weekly, resulting in low temporal resolution of the monitoring data, which hampers the ecological interpretation. This paper presents a portable computer vision system capable of attracting and detecting live insects. More specifically, the paper proposes detection and classification of species by recording images of live individuals attracted to a light trap. An Automated Moth Trap (AMT) with multiple light sources and a camera was designed to attract and monitor live insects during twilight and night hours. A computer vision algorithm referred to as Moth Classification and Counting (MCC), based on deep learning analysis of the captured images, tracked and counted the number of insects and identified moth species. Observations over 48 nights resulted in the capture of more than 250,000 images with an average of 5675 images per night. A customized convolutional neural network was trained on 2000 labeled images of live moths represented by eight different classes, achieving a high validation F1-score of 0.93. The algorithm measured an average classification and tracking F1-score of 0.71 and a tracking detection rate of 0.79. Overall, the proposed computer vision system and algorithm showed promising results as a low-cost solution for non-destructive and automatic monitoring of moths.

scholarly journals Task Planner for Robotic Disassembly of Electric Vehicle Battery Pack

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 387
Author(s):  
Martin Choux ◽  
Eduard Marti Bigorra ◽  
Ilya Tyapin
Keyword(s):  
Computer Vision ◽  
Electric Vehicles ◽  
Measurement Errors ◽  
Vision System ◽  
Lithium Ion ◽  
Battery Pack ◽  
Computer Vision System ◽  
Electric Vehicle Battery ◽  
Robotic Disassembly ◽  
Total Average

The rapidly growing deployment of Electric Vehicles (EV) put strong demands on the development of Lithium-Ion Batteries (LIBs) but also into its dismantling process, a necessary step for circular economy. The aim of this study is therefore to develop an autonomous task planner for the dismantling of EV Lithium-Ion Battery pack to a module level through the design and implementation of a computer vision system. This research contributes to moving closer towards fully automated EV battery robotic dismantling, an inevitable step for a sustainable world transition to an electric economy. For the proposed task planner the main functions consist in identifying LIB components and their locations, in creating a feasible dismantling plan, and lastly in moving the robot to the detected dismantling positions. Results show that the proposed method has measurement errors lower than 5 mm. In addition, the system is able to perform all the steps in the order and with a total average time of 34 s. The computer vision, robotics and battery disassembly have been successfully unified, resulting in a designed and tested task planner well suited for product with large variations and uncertainties.

scholarly journals Application of Artificial Intelligence in Food Industry—a Guideline

2021 ◽  
Author(s):  
Nidhi Rajesh Mavani ◽  
Jarinah Mohd Ali ◽  
Suhaili Othman ◽  
M. A. Hussain ◽  
Haslaniza Hashim ◽  
...  
Keyword(s):  
Artificial Intelligence ◽  
Intelligent Systems ◽  
Food Industry ◽  
Near Infrared ◽  
Vision System ◽  
Electronic Tongue ◽  
World Population ◽  
Computer Vision System ◽  
The Past

AbstractArtificial intelligence (AI) has embodied the recent technology in the food industry over the past few decades due to the rising of food demands in line with the increasing of the world population. The capability of the said intelligent systems in various tasks such as food quality determination, control tools, classification of food, and prediction purposes has intensified their demand in the food industry. Therefore, this paper reviews those diverse applications in comparing their advantages, limitations, and formulations as a guideline for selecting the most appropriate methods in enhancing future AI- and food industry–related developments. Furthermore, the integration of this system with other devices such as electronic nose, electronic tongue, computer vision system, and near infrared spectroscopy (NIR) is also emphasized, all of which will benefit both the industry players and consumers.

scholarly journals Evaluating the diameter of eyedropper tips using a computer vision system

2019 ◽  
Vol 82 (1) ◽  
Author(s):  
Edicley Vander Machado ◽  
Priscila Cardoso Cristovam ◽  
Denise de Freitas ◽  
José Álvaro Pereira Gomes ◽  
Vagner Rogério dos Santos
Keyword(s):  
Computer Vision ◽  
Vision System ◽  
Computer Vision System
Sign in / Sign up

Export Citation Format

Share Document