Surface active holmia/ γ-alumina nanocatalyst: Preparation and characterization

2021 ◽  
Vol 19 (4) ◽  
pp. 283-294
Author(s):  
Basma A.A. Balboul ◽  
A.K. Nohman ◽  
Randa F. Abd El-baki ◽  
Moutera S. Elshemery
Keyword(s):  
Electron Microscopy ◽  
Isopropyl Alcohol ◽  
Diffuse Reflectance Spectroscopy ◽  
Physicochemical Characteristics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Surface Active ◽  
Optical Applications ◽  
Adsorption Desorption

Holmia supported γ-alumina nanocatalyst was prepared by impregnation of γ-alumina with aqueous solution of holmium acetate hydrate Ho(CH3COO)3.3.5 H2O. The physicochemical characteristics of the nanocatalyst calcined at 600°C were established by different techniques, using surface adsorption–desorption of N2 (SBET), thermogravimetric analysis (TGA), X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and UV–vis diffuse reflectance spectroscopy (DRS). The recorded optical reflectance of the sample showed that the new self-assembled nanocatalyst is excellent as host material for advanced optical applications. Moreover, the catalyst showed enhanced catalytic activity toward Isopropyl alcohol decomposition.

scholarly journals Synthesis of porous LaFeO3 prepared by nanocasting method for photo-Fenton degradation of oily-containing wastewater

2021 ◽  
Vol 11 (1) ◽  
pp. xx-xx
Author(s):  
Nga Phan To ◽  
Lien Nguyen Hong ◽  
Tuyen Le Van ◽  
Nhan Phan Chi ◽  
Huyen Phan Thanh
Keyword(s):  
Electron Microscopy ◽  
Catalytic Activity ◽  
Visible Light ◽  
Diffuse Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Catalytic Activities ◽  
Transmission Electron ◽  
Visible Light Driven ◽  
Adsorption Desorption

Porous LaFeO3 were synthesised by nanocasting method using mesoporous silica (SBA-15) as a hard template and used as a visible-light-driven photocatalyst. The as-synthesised LaFeO3 photocatalyst were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray Diffraction (XRD), N2 adsorption-desorption, and Ultraviolet–Visible Diffuse Reflectance Spectroscopy (UV-vis DRS). The photo-Fenton catalytic activities of porous LaFeO3 were investigated for the degradation of oily-containing wastewater. The results showed that porous LaFeO3 had better photo-Fenton catalytic activity under visilbe light irradiation than pure LaFeO3. The remarkable improvement photo-Fenton catalytic activity of porous LaFeO3 material could be attributed to the synergistic effect of adsorption and visible light photo-Fenton processes thanks to its porous structure.

Synthesis and Characterization of Lead Sulfide Nanostructures with Different Morphologies via Simple Hydrothermal Method

2016 ◽  
Vol 35 (6) ◽  
pp. 559-566 ◽  
Author(s):  
Elaheh Esmaeili ◽  
Mohammad Sabet ◽  
Masoud Salavati-Niasari ◽  
Kamal Saberyan
Keyword(s):  
Electron Microscopy ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
Product Size ◽  
X Ray ◽  
Transmission Electron ◽  
Hydrothermal Approach ◽  
Size And Morphology

AbstractPbS nanostructures were synthesized successfully via hydrothermal approach with a new precursor. The products were characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV–Vis diffuse reflectance spectroscopy (DRS). The effect of different sulfur sources were investigated on product size and morphology.

Ordered Mesoporous SBA-15 for Controlled Release of Water-Insolube Drug

2011 ◽  
Vol 236-238 ◽  
pp. 1873-1876 ◽  
Author(s):  
Jun Jie Tao ◽  
Yun Qiang Xu ◽  
Guo Wei Zhou ◽  
Cui Cui Wu ◽  
Hong Bin Song ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Controlled Release ◽  
Hydrothermal Process ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Mesoscopic Structure ◽  
Ordered Mesoporous ◽  
Adsorption Desorption ◽  
Phosphate Buffered Saline

Ordered mesoporous SBA-15 was synthesized through hydrothermal process under acidic condition. The material was characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), small-angle X-ray diffraction (SAXRD), and N2 adsorption-desorption. The results indicated that SBA-15 has 2-dimensional hexagonal p6mm mesoscopic structure and well-ordered parallel mesochannel. The as-obtained mesoporous silica was used for controlled release of water-insolube drug emodin. The loading capacity could achieve 6.64 mg/g, and the release profiles that studied in phosphate buffered saline (PBS, pH = 7.4) showed that released amount of emodin was 95.8 % after 48 h.

SYNTHESIS, CHARACTERIZATION AND THE APPLICABILITY OF β-CYCLODEXTRINS FUNCTIONALIZED MESOPOROUS SBA-15 MOLECULAR SIEVES

NANO ◽  
2013 ◽  
Vol 08 (05) ◽  
pp. 1350050
Author(s):  
MIN GUAN ◽  
HAI-PENG BI ◽  
ZUYUAN WANG ◽  
SHAOHUA BU ◽  
LING HUANG ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Molecular Sieves ◽  
Nitrogen Adsorption ◽  
X Ray Diffraction ◽  
X Ray ◽  
Adsorption Capacities ◽  
Transmission Electron ◽  
Potential Applications ◽  
Adsorption Desorption

Mesoporous silicas SBA-15 are modified with β-Cyclodextrins (β-CD) by simple grafting method. β-CD functionalized SBA-15 was characterized by Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), nitrogen adsorption–desorption measurements, thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). Furthermore, the applicability of it is investigated through studying the adsorption properties of clenbuterol. It showed better adsorption capacities of clenbuterol than pure SBA-15. β-CD functionalized SBA-15 material has the potential applications in the treatment of clenbuterol contamination in food and environment science.

Room Temperature Synthesis of Cu2O Nanospheres: Optical Properties and Thermal Behavior

2014 ◽  
Vol 21 (1) ◽  
pp. 108-119 ◽  
Author(s):  
Daniela Nunes ◽  
Lídia Santos ◽  
Paulo Duarte ◽  
Ana Pimentel ◽  
Joana V. Pinto ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Thermal Behavior ◽  
Room Temperature ◽  
Diffuse Reflectance Spectroscopy ◽  
Ion Beam ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Transmission Electron

AbstractThe present work reports a simple and easy wet chemistry synthesis of cuprous oxide (Cu2O) nanospheres at room temperature without surfactants and using different precursors. Structural characterization was carried out by X-ray diffraction, transmission electron microscopy, and scanning electron microscopy coupled with focused ion beam and energy-dispersive X-ray spectroscopy. The optical band gaps were determined from diffuse reflectance spectroscopy. The photoluminescence behavior of the as-synthesized nanospheres showed significant differences depending on the precursors used. The Cu2O nanospheres were constituted by aggregates of nanocrystals, in which an on/off emission behavior of each individual nanocrystal was identified during transmission electron microscopy observations. The thermal behavior of the Cu2O nanospheres was investigated with in situ X-ray diffraction and differential scanning calorimetry experiments. Remarkable structural differences were observed for the nanospheres annealed in air, which turned into hollow spherical structures surrounded by outsized nanocrystals.

Photocatalytic Performance of BiOCl Nanosheets Composite with Graphene

2014 ◽  
Vol 496-500 ◽  
pp. 297-300 ◽  
Author(s):  
Bi Tao Liu ◽  
Liang Liang Tian ◽  
Ling Ling Peng
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Photocatalytic Performance ◽  
Diffuse Reflectance Spectroscopy ◽  
Hydrothermal Reaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
One Step ◽  
High Migration

A series of composites of the high photoactivity of {001} facets exposed BiOCl and grapheme sheets (GS) were synthesized via a one-step hydrothermal reaction. The obtained BiOCl/GS photocatalysts were characterized by X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy, transmission electron microscopy (TEM), Ultraviolet-visible (UV-Vis) diffuse reflectance spectroscopy. The as-prepared BiOCl/GS photocatalyst showed enhanced photocatalytic activity for the degradation of methyl orange (MO) under UV and visible light (λ > 400 nm). The enhanced photocatalytic activity could be attributed to oxygen vacancies of the {001} facets of BiOCl/GS and the high migration efficiency of photo-induced electrons, which could suppress the charge recombination effectively.

scholarly journals Photocatalytic Reduction of CO2Using TiO2-Graphene Nanocomposites

2016 ◽  
Vol 2016 ◽  
pp. 1-5 ◽  
Author(s):  
Jinghua Liu ◽  
Yinghua Niu ◽  
Xiong He ◽  
Jingyao Qi ◽  
Xin Li
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Raman Spectroscopy ◽  
Chemical Method ◽  
X Ray Diffraction ◽  
Graphene Nanocomposites ◽  
X Ray ◽  
Transmission Electron ◽  
Simple Chemical ◽  
Adsorption Desorption

TiO2-graphene (TiO2-RGO) nanocomposites were preparedviaa simple chemical method by using graphene oxide (GO) and TiO2nanoparticles as starting materials. The morphologies and structural properties of the as-prepared composites were characterized by X-ray diffraction, Raman spectroscopy, N2adsorption-desorption measurements, and transmission electron microscopy. TiO2-RGO nanocomposites exhibited great photocatalytic activity toward reduction of CO2into CH4(2.10 μmol g−1 h−1) and CH3OH (2.20 μmol g−1 h−1), which is attributed to the synergistic effect between TiO2and graphene.

Mesoporous TiO2 Prepared by Using Lac Red as Template：Synthesis, Characterization, and Adsorption of Gaseous Acetaldehyde

2013 ◽  
Vol 742 ◽  
pp. 448-451
Author(s):  
Ming Feng Wang ◽  
Tou Gen Liao ◽  
Bao Kun Zhu ◽  
Yao Wang ◽  
Yan Qing Duan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Mesoporous Titania ◽  
X Ray Diffraction ◽  
High Adsorption ◽  
X Ray ◽  
Transmission Electron ◽  
Adsorption Desorption ◽  
Scanning Electron

Mesoporous TiO2 with anatase crystalline structure (MTiO2) has been synthesized by using Lac Red as template. The synthesized mesoporous titania samples were characterized by a combination of various physicochemical techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), N2 adsorption/desorption. It was found that without any external doping MTiO2 exhibited significant high adsorption abilities for adsorbing the gaseous acetaldehyde by the adsorption ratio of 39.15%.

Performance of CO2 Adsorption with MEA-AN Modified Solid Adsorbent

2013 ◽  
Vol 341-342 ◽  
pp. 13-17
Author(s):  
Xiao Yun Zhang ◽  
Hong Yan Qin ◽  
Xiu Xin Zheng ◽  
Shi Hu Yu ◽  
Wei Wu
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Pore Channel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Solid Adsorbent ◽  
Satisfactory Performance ◽  
Transmission Electron ◽  
Ft Ir ◽  
Adsorption Desorption

CO2solid adsorbent was prepared through impregnating acrylonitrile (AN) modified monoethanolamine (MEA) into structurally disordered mesoporous silica (M) pore channel. Its structure was characterized by X-ray diffraction characterization (XRD), N2adsorption-desorption tests (BET), Transmission electron microscopy (TEM) and Fourier transform infrared (FT-IR). The capacity of CO2adsorption and desorption were measured and evaluated by comparison with MEA-impregnated material. The results showed that the capacity of M-MN-50 reached up to 125.8 mg·g-1and could desorb completely at the temperature of 40 °C by vacuum with 2.6 KPa. The hybrid material exhibited satisfactory performance during 10 turnovers.

The Preparation of Fe3O4 Magnetic Nanometer Particle by Co-Precipitation Method

2012 ◽  
Vol 271-272 ◽  
pp. 320-323
Author(s):  
Xiao Chun Ma ◽  
Lei Hao Cui ◽  
Guang Fei Xu
Keyword(s):  
Electron Microscopy ◽  
Surface Active Agent ◽  
Active Agent ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Surface Active ◽  
Co Precipitation ◽  
Nanometer Particle

In this paper, the Fe3O4 magnetic nanometer particle was prepared by co-precipitation method. At the same time, the samples were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results show that the surface active agent (PEG4000) can be good for the dispersion performance of Fe3O4 magnetic nanometer particle; and the temperature of 80°C is the appropriate drying temperature to prepare the Fe3O4 magnetic nanometer particle.

Sign in / Sign up

Export Citation Format

Share Document