Geometrical shapes effects of optical cavity on entanglement dynamics of optomechanical systems: A numerical analysis

2021 ◽  
pp. 1-11
Author(s):  
Mehrad Gavahi ◽  
Hong Rong Li
Keyword(s):  
Steady State ◽  
Numerical Analysis ◽  
Optical Cavity ◽  
Entanglement Dynamics ◽  
Optomechanical System ◽  
Optomechanical Systems ◽  
Optical Cavities ◽  
Mechanical Coupling ◽  
Geometrical Shapes ◽  
Mechanical Oscillators

In this work, a model of optomechanical system was investigated by analyzing the entanglement dynamics of two related mechanical oscillators in a modified system. Geometrical shapes effects of optical cavities on entanglement of a representative optomechanical system were investigated by means of performing numerical analysis. It was signified that the steady-state or the dynamic behavior of optomechanical engagement could be created owing to the strength of mechanical pairs, which are strong towards the oscillating temperature. In addition, the mentioned entanglement dynamics were seen to be entirely related to the natural state’s stability. Furthermore, rendering the mechanical damping effects, the critical mechanical coupling strength-related analytical expression, where the transition from a steady state to a dynamic clamp occurs, was reported. In the studied system, two identical mechanical oscillators were formed in different conditions of the optical cavities shapes.

Steady-state quantum correlation measurement in hybrid optomechanical systems

2020 ◽  
pp. 2050046
Author(s):  
Tesfay Gebremariam Tesfahannes ◽  
Merkebu Dereje Getahune
Keyword(s):  
Correlation Function ◽  
Steady State ◽  
Quantum Entanglement ◽  
Quantum Correlation ◽  
Optical Cavity ◽  
Quantum Correlations ◽  
Correlation Measurement ◽  
Atomic Ensemble ◽  
Optomechanical System ◽  
Optomechanical Systems

In this paper, we investigate the steady-state of quantum correlation measurement of hybrid optomechanical systems. The first system consists of a single optomechanical system simultaneously coupled to a mechanical oscillator. While the second system is a hybrid optomechanical system consisting of an atomic ensemble placed in between the optical cavity and mirror. For both optomechanical systems, we formulate the Hamiltonian and the explicit expression of the covariance matrix leading to the dynamic of the system. Under the linearization approximation, we investigate the steady-state quantum correlations which are quantified through the correlation function of non-Hermitian operators, while the logarithmic negativity is used to quantify the amount of quantum entanglement between the subsystems. Furthermore, our proposed quantum correlation function can be used to quantify the entangled bipartite states that are correlative and transfer information. It is found that the transfer of quantum correlations between the subsystem is related to the detuning and coupling strength. Our results provide a realistic route toward remote quantum entanglement detection and a framework of future realistic fiber-optic quantum network operating applications.

scholarly journals Ellipsoidal Optical Cavities for Enhanced Thermophotovoltaics

2021 ◽  
Author(s):  
Paul O'Brien ◽  
Nima Talebzadeh ◽  
Atousa Pirvaram
Keyword(s):  
Numerical Analysis ◽  
Solar Radiation ◽  
Concentration Factor ◽  
Optical Cavity ◽  
Black Body ◽  
Geometrical Parameters ◽  
View Factor ◽  
Optical Cavities ◽  
Pv Cell ◽  
Photon Recycling

Herein we present an optical cavity in the form of a prolate ellipsoid that can greatly enhance the performance of solar thermophotovoltaic (STPV) systems. The geometrical parameters of the cavity can be designed to control the degree of photon recycling, the temperature of the emitter within the STPV system, gap distance and effective view factor between the PV cell and the emitter, and to minimize the emission losses. Numerical analysis shows the ellipsoidal optical cavity can be designed to achieve an effective view factor of 88.7% between the emitter and PV cell within a STPV system. Results show an efficiency of 5.62% in a STPV system with a GaSb PV cell and a black-body emitter under solar radiation at a concentration factor of 350X. Further, assuming the surface of the ellipsoidal optical cavity is capable of reflecting 99% of the radiation incident onto its surface, efficiencies of 15.54% can be attained when the solar concentration factor is 1400X. These results are attained for STPV systems without using selective absorbers, emitters or filters. The ellipsoidal optical cavity can be integrated into the design of advanced TPV systems and bring them closer to the high theoretical efficiencies TPV systems are capable of.

scholarly journals Wigner Function Reconstruction in Levitated Optomechanics

2017 ◽  
Vol 4 (1) ◽  
Author(s):  
Muddassar Rashid ◽  
Marko Toroš ◽  
Hendrik Ulbricht
Keyword(s):  
Wigner Function ◽  
Continuous Measurement ◽  
Laser Light ◽  
Thermal State ◽  
Optical Cavity ◽  
Homodyne Detection ◽  
Perfect Agreement ◽  
Optomechanical Systems ◽  
Mechanical Coupling ◽  
Quantum State Preparation

AbstractWe demonstrate the reconstruction of theWigner function from marginal distributions of the motion of a single trapped particle using homodyne detection. We show that it is possible to generate quantum states of levitated optomechanical systems even under the efect of continuous measurement by the trapping laser light. We describe the opto-mechanical coupling for the case of the particle trapped by a free-space focused laser beam, explicitly for the case without an optical cavity. We use the scheme to reconstruct the Wigner function of experimental data in perfect agreement with the expected Gaussian distribution of a thermal state of motion. This opens a route for quantum state preparation in levitated optomechanics.

scholarly journals Chaotic synchronization of two optical cavity modes in optomechanical systems

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Nan Yang ◽  
Adam Miranowicz ◽  
Yong-Chun Liu ◽  
Keyu Xia ◽  
Franco Nori
Keyword(s):  
Phase Synchronization ◽  
Optical Cavity ◽  
Chaotic Synchronization ◽  
Complete Synchronization ◽  
Optical Mode ◽  
Mechanical Resonator ◽  
Optomechanical System ◽  
Optomechanical Systems ◽  
Cavity Modes ◽  
Optical Modes

Abstract The synchronization of the motion of microresonators has attracted considerable attention. In previous studies, the microresonators for synchronization were studied mostly in the linear regime. While the important problem of synchronizing nonlinear microresonators was rarely explored. Here we present theoretical methods to synchronize the motions of chaotic optical cavity modes in an optomechanical system, where one of the optical modes is strongly driven into chaotic motion and transfers chaos to other weakly driven optical modes via a common mechanical resonator. This mechanical mode works as a common force acting on each optical mode, which, thus, enables the synchronization of states. We find that complete synchronization can be achieved in two identical chaotic cavity modes. For two arbitrary nonidentical chaotic cavity modes, phase synchronization can also be achieved in the strong-coupling small-detuning regime.

scholarly journals Ellipsoidal Optical Cavities for Enhanced Thermophotovoltaics

2021 ◽  
Author(s):  
Paul O'Brien ◽  
Nima Talebzadeh ◽  
Atousa Pirvaram
Keyword(s):  
Numerical Analysis ◽  
Solar Radiation ◽  
Concentration Factor ◽  
Optical Cavity ◽  
Black Body ◽  
Geometrical Parameters ◽  
View Factor ◽  
Optical Cavities ◽  
Pv Cell ◽  
Photon Recycling

Herein we present an optical cavity in the form of a prolate ellipsoid that can greatly enhance the performance of solar thermophotovoltaic (STPV) systems. The geometrical parameters of the cavity can be designed to control the degree of photon recycling, the temperature of the emitter within the STPV system, gap distance and effective view factor between the PV cell and the emitter, and to minimize the emission losses. Numerical analysis shows the ellipsoidal optical cavity can be designed to achieve an effective view factor of 88.7% between the emitter and PV cell within a STPV system. Results show an efficiency of 5.62% in a STPV system with a GaSb PV cell and a black-body emitter under solar radiation at a concentration factor of 350X. Further, assuming the surface of the ellipsoidal optical cavity is capable of reflecting 99% of the radiation incident onto its surface, efficiencies of 15.54% can be attained when the solar concentration factor is 1400X. These results are attained for STPV systems without using selective absorbers, emitters or filters. The ellipsoidal optical cavity can be integrated into the design of advanced TPV systems and bring them closer to the high theoretical efficiencies TPV systems are capable of.

scholarly journals A Nanoscale Photonic Crystal Cavity Optomechanical System for Ultrasensitive Motion Sensing

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 462
Author(s):  
Ji Xia ◽  
Fuyin Wang ◽  
Chunyan Cao ◽  
Zhengliang Hu ◽  
Heng Yang ◽  
...  
Keyword(s):  
Photonic Crystal ◽  
Optical Cavity ◽  
Optical Quality ◽  
Optical Force ◽  
Mechanical Oscillator ◽  
Maximum Displacement ◽  
Optomechanical System ◽  
High Optical Quality ◽  
Hybrid Platform ◽  
Optomechanical Coupling

Optomechanical nanocavities open a new hybrid platform such that the interaction between an optical cavity and mechanical oscillator can be achieved on a nanophotonic scale. Owing to attractive advantages such as ultrasmall mass, high optical quality, small mode volume and flexible mechanics, a pair of coupled photonic crystal nanobeam (PCN) cavities are utilized in this paper to establish an optomechanical nanosystem, thus enabling strong optomechanical coupling effects. In coupled PCN cavities, one nanobeam with a mass meff~3 pg works as an in-plane movable mechanical oscillator at a fundamental frequency of . The other nanobeam couples light to excite optical fundamental supermodes at and 1554.464 nm with a larger than 4 × 104. Because of the optomechanical backaction arising from an optical force, abundant optomechanical phenomena in the unresolved sideband are observed in the movable nanobeam. Moreover, benefiting from the in-plane movement of the flexible nanobeam, we achieved a maximum displacement of the movable nanobeam as 1468 . These characteristics indicate that this optomechanical nanocavity is capable of ultrasensitive motion measurements.

Steady-state Characterization of LLC-based Single-Stage AC/DC Converter Based on Numerical Analysis

2021 ◽  
pp. 1-1
Author(s):  
Xiang Li ◽  
Liuniu Guo ◽  
Tianchen Lang ◽  
Daorong Lu ◽  
Khalil Alluhaybi ◽  
...  
Keyword(s):  
Steady State ◽  
Numerical Analysis ◽  
Single Stage

Engineering the sensitivity of macroscopic physical systems to variations in the fine-structure constant

2021 ◽  
Author(s):  
Beata Zjawin ◽  
Marcin Bober ◽  
Roman Ciuryło ◽  
Daniel Lisak ◽  
Michał Zawada ◽  
...  
Keyword(s):  
Fine Structure ◽  
Optical Cavity ◽  
Structure Constant ◽  
Relativistic Effects ◽  
Fine Structure Constant ◽  
Sensitivity Factor ◽  
Optical Cavities ◽  
Physical Systems ◽  
Heavy Atoms ◽  
Nuclear Transitions

Abstract Experiments aimed at searching for variations in the fine-structure constant α are based on spectroscopy of transitions in microscopic bound systems, such as atoms and ions, or resonances in optical cavities. The sensitivities of these systems to variations in α are typically on the order of unity and are fixed for a given system. For heavy atoms, highly charged ions and nuclear transitions, the sensitivity can be increased by benefiting from the relativistic effects and favorable arrangement of quantum states. This article proposes a new method for controlling the sensitivity factor of macroscopic physical systems. Specific concepts of optical cavities with tunable sensitivity to α are described. These systems show qualitatively different properties from those of previous studies of the sensitivity of macroscopic systems to variations in α, in which the sensitivity was found to be fixed and fundamentally limited to an order of unity. Although possible experimental constraints attainable with the specific optical cavity arrangements proposed in this article do not yet exceed the present best constraints on α variations, this work paves the way for developing new approaches to searching for variations in the fundamental constants of physics.

Sign in / Sign up

Export Citation Format

Share Document