scholarly journals A Microstrip MIMO Antenna with Enhanced Isolation for WiMAX Applications

2019 ◽  
Vol 2019 (2) ◽  
pp. 99-105
Author(s):  
Nguyễn Ngọc Lan ◽  
Nguyễn Thị Thu Hằng ◽  
Hồ Văn Cừu
Keyword(s):  
Radiation Efficiency ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
High Radiation ◽  
Central Frequency ◽  
Mimo Antenna ◽  
High Isolation ◽  
Measurement Results ◽  
Multiple Input ◽  
Good Agreement

In this paper, a multiple-input multipleoutput (MIMO) antenna with high isolation is designed using defected ground structure (DGS). The proposed antenna is constructed by two sets of four elements (2×2), which are designed at the central frequency of 3.5 GHz for Worldwide Interoperability for Microwave Access (WiMAX) applications. The antenna is fabricated on a FR4 substrate with an overall size of 144 × 99 × 1.6 mm. Thanks to DGS, the designed MIMO antenna achieves a high isolation of 30 dB and a high radiation efficiency of over 90%. Besides, this MIMO antenna attains a 7.5 dBi gain. There is a good agreement between the simulated S-parameters and the measurement results.

scholarly journals Design Of Enhanced Bandwidth Of Dual Element MIMO Antenna For Wireless Applications

2021 ◽  
Vol 12 (6) ◽  
pp. 1030-1036
Author(s):  
B Shruthi, Et. al.
Keyword(s):  
Multiple Input Multiple Output ◽  
Frequency Range ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Broad Bandwidth ◽  
Mimo Antenna ◽  
Wireless Applications ◽  
High Isolation ◽  
Multiple Input ◽  
Input Multiple Output

A multiple-input-multiple-output lightweight printed ultrawideband antenna among a dimension about 40×50mm2to minimise the coupling between these two antennas, the proposed antenna with a quarter circular radiating patch, with defected ground structure is designed. The antenna developed by MIMO is highly isolated, stronger than -15dB. In the working band, from 2.67GHz to 14GHz. The simulation indicates that the proposed MIMO antenna will balance the complete enhanced band with a broad bandwidth by making use of CST. It operates at 5.83GHz, 8.07GHz, 12.28GHz and bandwidth tends to cover the ultrawideband range. UWB band and high isolation, that assemblesit perfect for any application of wireless modules in the UWB range, in order to minimise coupling. For indoor applications and wireless applications these frequency range is used.

scholarly journals A Compact Multi-Band MIMO Antenna with High Isolation for C and X Bands Using Defected Ground Structure

2018 ◽  
Vol 27 (3) ◽  
pp. 686-693 ◽  
Author(s):  
N. Pouyanfar ◽  
Ch. Ghobadi ◽  
J. Nourinia ◽  
K. Pedram ◽  
M Majidzadeh
Keyword(s):  
Defected Ground Structure ◽  
Ground Structure ◽  
Mimo Antenna ◽  
High Isolation ◽  
Multi Band

scholarly journals A High Isolation MIMO Antenna without Decoupling Structure for LTE 700 MHz

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Yanjie Wu ◽  
Yunliang Long
Keyword(s):  
Impedance Matching ◽  
Multiple Input Multiple Output ◽  
Monopole Antenna ◽  
Antenna Element ◽  
Mimo Antenna ◽  
High Isolation ◽  
Antenna Performance ◽  
Measurement Results ◽  
Multiple Input ◽  
Input Multiple Output

This paper presents a long-term evolution (LTE) 700 MHz band multiple-input-multiple-output (MIMO) antenna, and high isolation between the two symmetrical antenna elements is obtained without introducing extra decoupling structure. Each antenna element is a combination antenna of PIFA and a meander monopole antenna. The end of the PIFA and the meander monopole antenna are, respectively, overlapped with the 50 Ω microstrip feed line, the two overlapping areas produce additional capacitance which can be considered decoupling structures to enhance the isolation for the MIMO antenna, as well as the impedance matching of the antenna elements. The MIMO antenna is etched on FR4 PCB board with dimensions of 71 × 40 × 1.6 mm3; the edge-to-edge separation of the two antenna elements is only nearly 0.037 λat 700 MHz. Both simulation and measurement results are used to confirm the MIMO antenna performance; the operating bandwidth is 698–750 MHz withS11≤−6 dB andS21≤−23 dB.

scholarly journals A New Microstrip Filter Using CRLH Structure and Defected Ground Structure in Antenna Application

2014 ◽  
Vol 2014 ◽  
pp. 1-5
Author(s):  
Xin Cao ◽  
Zongxi Tang ◽  
Fei Wang ◽  
Yunqiu Wu ◽  
Biao Zhang
Keyword(s):  
Bandpass Filter ◽  
Resonance Mode ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Excellent Performance ◽  
Microstrip Filter ◽  
Left Handed ◽  
Measurement Results ◽  
Good Agreement ◽  
Interdigital Capacitors

A new microstrip bandpass filter using composite right/left-handed (CRLH) mushroom structure with interdigital capacitors and defected ground structure (DGS) is proposed. The proposed filter uses CRLH mushroom structure working at its first negative resonance mode to create the passband and DGS to increase rejection outside the passband. Simulation and measurement results are in good agreement, and low in-band insertion loss and great out-band rejection have been achieved. It is demonstrated that the combination of CRLH mushroom structure with interdigital capacitors and DGS has succeeded in achieving excellent performance. This new filter can be applied in transmitting and receiving antennas.

scholarly journals Mutual Coupling Reduction in Microstrip Antennas using Defected Ground Structure

2020 ◽  
Author(s):  
Lan Ngoc Nguyen
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Microstrip Antennas ◽  
Area Network ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Mimo Antenna ◽  
High Isolation

A Multiple Input Multiple Output (MIMO) antenna with high isolation is proposed in this paper. The proposed antenna includes two sets of four elements (2 x 2) and it is yielded at the central frequency of 5.5 GHz for Wireless Local Area Network (WLAN) applications. Based on RT5880 with height of 1.575 mm, the overall size of MIMO antenna is 140 x 76 x 1.575 mm3. To get high isolation between antenna elements, a Defected Ground Structure (DGS) is integrated on ground plane. Besides, the MIMO antenna witnesses a large bandwidth of 9.1% and an efficiency of 90% while the pick gain is 8.5 dBi. The measurement results are compared to simulation ones to verify the performance of the proposed antenna.

scholarly journals Design of a SIW Bandpass Filter Using Defected Ground Structure with CSRRs

2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
Weiping Li ◽  
Zongxi Tang ◽  
Xin Cao
Keyword(s):  
Bandpass Filter ◽  
Simulation Software ◽  
Ring Resonators ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Split Ring ◽  
Split Ring Resonators ◽  
Resonant Modes ◽  
Measurement Results ◽  
Good Agreement

In this paper, a substrate integrated waveguide (SIW) bandpass filter using defected ground structure (DGS) with complementary split ring resonators (CSRRs) is proposed. By using the unique resonant properties of CSRRs and DGSs, two passbands with a transmission zero in the middle have been achieved. The resonant modes of the two passbands are different and the bandwidth of the second passband is much wider than that of the first one. In order to increase out-of-band rejection, a pair of dumbbell DGSs has been added on each side of the CSRRs. The structure is analyzed using equivalent circuit models and simulated based on EM simulation software. For validation, the proposed filter is fabricated and measured. The measurement results are in good agreement with the simulated ones.

Inverted L-slot triple-band antenna with defected ground structure for WLAN and WiMAX applications

2015 ◽  
Vol 9 (1) ◽  
pp. 191-196 ◽  
Author(s):  
Alaknanda Kunwar ◽  
Anil Kumar Gautam ◽  
Binod Kumar Kanaujia
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Area Network ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Compact Size ◽  
Measurement Results ◽  
Good Agreement ◽  
Triple Band

To incorporate two different communication standards in a single device, a compact triple-band antenna is proposed in this paper. The proposed antenna is formed by etching an inverted L-shaped slot on the patch with defected ground structure. The antenna is targeted to excite three separate bands first from 2.39–2.51, second from 3.15–3.91, and third from 4.91–6.08 GHz that covers entire Wireless Local Area Network (WLAN) (2.4/5.2/5.8 GHz) and Worldwide Interoperability for Microwave Access (WiMAX) (2.5/3.5/5.5) bands. Thus, the proposed antenna provides feasibility to integrate WLAN and WiMAX communication standards in a single device with good radiation pattern quality. Furthermore, a prototype of the proposed antenna fabricated and measured to validate the design, shows a good agreement between simulated and measured results. The simulation and measurement results show that the designed antenna is capable of operating over the 2.39–2.51 GHz, 3.15–3.91 GHz, and 4.91–6.08 GHz frequency bands while rejecting frequency ranges between these three bands. The proposed antenna offers a compact size of 20 × 30 mm2 as compared with earlier reported papers.

scholarly journals High Isolation and Ideal Correlation Using Spatial Diversity in a Compact MIMO Antenna for Fifth-Generation Applications

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Doae El Hadri ◽  
Alia Zakriti ◽  
Asmaa Zugari ◽  
Mohssine El Ouahabi ◽  
Jamal El Aoufi
Keyword(s):  
Multiple Input Multiple Output ◽  
Spatial Diversity ◽  
Mimo Antenna ◽  
Mimo Antennas ◽  
High Isolation ◽  
Fifth Generation ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Diversity Technique ◽  
Good Agreement

This paper presents a compact Multiple Input Multiple Output antenna with high isolation and low envelope correlation (ECC) for fifth-generation applications using spatial diversity technique. The proposed MIMO antenna consists of two single antennas, each having size of 13 × 12.8 mm2, symmetrically arranged next to each other. The single and MIMO antennas are simulated and analyzed. To verify the simulated results, the prototype antennas were fabricated and measured. A good agreement between measurements and simulations is obtained. The proposed antenna covers the 28 GHz band (27.5–28.35 GHz) allocated by the FCC for 5G applications. Moreover, the isolation is more than 35 dB and the ECC is less than 0.0004 at the operating band, which means that the mutual coupling between the two elements is negligible. The MIMO parameters, such as diversity gain (DG), total active reflection coefficient (TARC), realized gain, and efficiency, are also studied. Thus, the results demonstrate that our antenna is suitable for 5G MIMO applications.

Sign in / Sign up

Export Citation Format

Share Document