scholarly journals USULAN PERANCANGAN ULANG TATA LETAK GUDANG PRODUK JADI DAN BAHAN BAKU DENGAN METODE SHARED STORAGE DI PT. TEMPRINA MEDIA GRAFIKA SURABAYA

JUMINTEN ◽  
2021 ◽  
Vol 2 (1) ◽  
pp. 168-178
Author(s):  
Noval Dwi Aryadipura ◽  
Rusindiyanto Rusindiyanto ◽  
Erlina Purnamawaty
Keyword(s):  
Material Handling ◽  
Shared Storage ◽  
Total Material

PT. Temprina Media Grafika adalah bagian dari Jawa Pos Group yang bergerak di bidangjasa percetakan dan kardus. Permasalahan yang dialami oleh PT. Temprina Media Grafika adalahpenempatan produk jadi yang berada di area gudang tidak berada pada satu area yangsama,sehingga didalam hal ini harus mencari dan menata ulang dalam pengambilan produk. Untukmeningkatkan efisiensi dari penggunaan material handling maka dilakukan penelitian yangbertujuan untuk menentukan kebutuhan luas area yang dibutuhkan untuk gudang barang jadi danmerancang tata letak gudang usulan gudang barang jadi di PT. Temprina Media Grafika, sehinggadapat mempermudah proses penyimpanan dan pengeluaran barang dari gudang barang jadi, namuntetap mempertahankan luas gudang yang sudah ada dengan menggunakan metode Shared Storage.Metode Shared Storage adalah suatu penyusunan area-area penyimpanan berdasarkan kondisi luaslantai gudang, kemudian diurutkan dari area yang paling dekat sampai area yang terjauh dan pintukeluar masuk sehingga penempatan barang yang akan segera dikirim diletakkan pada area yangpaling dekat dan begitu seterusnya. Shared storage dianggap sebagai sistem pemindahan barangyang tepat terhadap suatu produk. Pengujian yang dilakukan terhadap desain tata letak awalmenghasilkan 641 m dan pada kondisi usulan penerapan metode shared storage didapat 254 m,maka diketahui terjadi penurunan jarak total material handling dengan selisih sebanyak 387 m atauterdapat penurunan sebesar 60.37 %.

scholarly journals ANALYSIS OF THE LAYOUT OF THE FINISHED GOODS WAREHOUSE USING THE SHARED STORAGE METHOD TO INCREASE STORAGE EFFECTIVENESS IN PT. NCS LOGISTIC LINK

2021 ◽  
Vol 1 (01) ◽  
pp. 26
Author(s):  
Putri Shima ◽  
Akhmad Syakhroni
Keyword(s):  
Material Handling ◽  
Management Service ◽  
Shared Storage ◽  
Transportation Management ◽  
The Road ◽  
Warehouse Location ◽  
Warehouse Workers ◽  
Freight Forwarding ◽  
The Cost ◽  
A Company

PT NCS LOGISTIC LINK is a Transportation Management Service company or commonly called Freight Forwarding.  PT.  NCS is also engaged in the rental of Warehouses. In the Warehouse at PT NCS LOGISTIC LINK, there is a problem with the layout of the storage of goods in the Warehouse which is still not optimal because the cost of Material Handling in the company is still high and also PT NCS LOGISTIC LINK, a company that manages warehouse rental for companies  manufacture.  The problems faced by PT NCS LOGISTIC LINK today are the problems that are often faced is the handling of incoming and outgoing goods in the company's warehouse, the company still does not have a defined system, so that the placement of goods in the warehouse is not neatly arranged so that the warehouse seems narrow.  Likewise, the warehouse line or line layout is not clear, the placement of finished goods for both export and local products is placed in one location with the material (Completely Knock Down / CKD) in one warehouse location, there is no barrier between the goods belonging to one customer and another.  other things, goods are placed to close the road area or forklift lanes and warehouse doors, and goods that have entered earlier are closed with new incoming goods, thus hampering the process of handling goods.  With limited storage space, companies are required to use space effectively and efficiently so that storage activities are not hampered and can find the best layout that is more effective and efficient and does not hamper the delivery process.  The method used in warehousing management is a shared storage approach in which the products that have the most shipping frequency and the ones that frequently go in and out are brought close to the entrance to minimize the distance of material handling movement.  The results of the shared storage approach can minimize the material handling distance of the proposed layout is 1386 m, while the previous condition, the initial layout distance was 1900 m. Has a total range of 514 meters of total mileage. This means that the layout of the proposal could shorten the mileage through which warehouse workers take goods.

scholarly journals PERANCANGAN ULANG TATA LETAK PENYIMPANAN BARANG MENGGUNAKAN METODE DEDICATED STORAGE (STUDI KASUS : PT. TEMPRINA MEDIA GRAFIKA)

2019 ◽  
Vol 14 (1) ◽  
pp. 17-25
Author(s):  
Yola Bagus Priliyanto ◽  
Sumiati Sumiati
Keyword(s):  
Material Handling ◽  
Total Material

PT Temprina Media Grafika merupakan bagian dari Jawapos Group yang bergerak di bidang jasa percetakan dan packaging. Produk-Produk percetakan seperti buku, majalah, Koran, al-quran dan packaging, merupakan hasil utama PT. Temprina Media Grafika yang di produksi dengan dukungan mesin-mesin dan tenaga ahli dalam bidang grafika. Permasalahan yang dihadapi PT Temprina Media Grafika adalah tata letak gudang yang ada belum sesuai tempatnya. Pola penyimpanan dan penyusunan dilakukan secara acak bergantung pada posisi gudang yang kosong sedangkan tempat tersebut sebenarnya bukan tempat penyimpanan barang, sehingga mengakibatkan terjadinya aktivitas tambahan dan pengangkutan produk dengan jarak yang lebih jauh. Dalam penelitian diusulkan suatu metode, dimana metode ini dapat membuat perancangan tata letak gudang yang lebih efektif terhadap pemindahan produk di gudang, mendapatkan rancangan tata letak gudang produk yang efektif, memindahkan jarak transportasi pada gudang, dan menghemat pemindahan dan pengaturan produk. Metode yang tepat untuk menyelasaikan masalah tersebut adalah menggunakan metode Dedicated Storage. Hasil dari penelitian ini, kondisi jarak perjalanan pemindahan bahan awal didapatkan jarak perjalanan sebesar 7.929,63 m dan pada kondisi usulan penerapan dedicated storage didapat jarak perjalanan sebesar 6.572,85 m. Sehingga terjadi penurunan jarak total material handling dengan selisih sebanyak 1.356,78   m.

scholarly journals Analisa Alogaritma Layout Heuristik untuk Meminimasi Total Material handling dalam Perencanaan tata Letak Fasilitas

2010 ◽  
Vol 3 (1) ◽  
pp. 22
Author(s):  
Annisa, Kesy G
Keyword(s):  
Material Handling ◽  
Input Process ◽  
Forward Flow ◽  
Total Distance ◽  
Material Cost ◽  
Total Material ◽  
Better Than

This research has goal to compare there alternative layout performances CRAFT,MULTIPLE, and BLOCPLAN. Using the problem of layout which include forward flow material and fordward backward flow material can be found result : Multiple Algoritm has total distance and material cost minimally but the problems that have lower departement,CRAFT algoritm can be used better than MULTIPLE algoritm because almost gives the same result with easier input process.

Microbulldozing and Microchiseling

1969 ◽  
Vol 27 ◽  
pp. 134-135
Author(s):  
J.N. Ramsey ◽  
D.P. Cameron ◽  
F.W. Schneider
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Material Handling ◽  
Microprobe Analysis ◽  
Foreign Matter ◽  
Specific Location ◽  
Potential Problems ◽  
Knoop Indenter ◽  
Scanning Electron ◽  
Microhardness Tester

As computer components become smaller the analytical methods used to examine them and the material handling techniques must become more sensitive, and more sophisticated. We have used microbulldozing and microchiseling in conjunction with scanning electron microscopy, replica electron microscopy, and microprobe analysis for studying actual and potential problems with developmental and pilot line devices. Foreign matter, corrosion, etc, in specific locations are mechanically loosened from their substrates and removed by “extraction replication,” and examined in the appropriate instrument. The mechanical loosening is done in a controlled manner by using a microhardness tester—we use the attachment designed for our Reichert metallograph. The working tool is a pyramid shaped diamond (a Knoop indenter) which can be pushed into the specimen with a controlled pressure and in a specific location.

MATERIAL HANDLING MACHINES AND SYSTEMS – UMI-TWINN PROJECT CONTRIBUTION

2019 ◽  
Vol 12 (1) ◽  
pp. 7-20
Author(s):  
Péter Telek ◽  
Béla Illés ◽  
Christian Landschützer ◽  
Fabian Schenk ◽  
Flavien Massi
Keyword(s):  
Material Handling ◽  
Digital Data ◽  
Flow Process ◽  
Research Directions ◽  
Scientific Excellence ◽  
Research Activities ◽  
New Research ◽  
Eu Project ◽  
The University

Nowadays, the Industry 4.0 concept affects every area of the industrial, economic, social and personal sectors. The most significant changings are the automation and the digitalization. This is also true for the material handling processes, where the handling systems use more and more automated machines; planning, operation and optimization of different logistic processes are based on many digital data collected from the material flow process. However, new methods and devices require new solutions which define new research directions. In this paper we describe the state of the art of the material handling researches and draw the role of the UMi-TWINN partner institutes in these fields. As a result of this H2020 EU project, scientific excellence of the University of Miskolc can be increased and new research activities will be started.

PERBAIKAN TATA LETAK LANTAI PRODUKSI INDUSTRI MEBEL MENGGUNAKAN METODE GRAFIK DAN ALGORITMA CRAFT

2020 ◽  
Vol 6 (1) ◽  
pp. 1
Author(s):  
Kuswanto Kuswanto ◽  
Juan Junius ◽  
Anita Christine Sembiring
Keyword(s):  
Operating System ◽  
Material Handling ◽  
Facility Layout ◽  
Integrated Planning ◽  
Furniture Manufacturing ◽  
Milling Machines ◽  
Material Handling Costs ◽  
The Cost ◽  
A Company ◽  
Research Show

Facility layout is integrated planning of the flow of a product in an operating system to obtain the most effective and efficient interrelation between workers, materials, machinery, and equipment as well as handling and transferring materials. A company engaged in furniture manufacturing has a problem in its production process, namely, the distance between machines is too far so that it affects the cost of handling materials. Distant workstations are found on profile machines, milling machines, measuring machines, cutting machines. Therefore, improvements must be made to the layout of facilities on the production floor so that facility layout is efficient and material handling costs are reduced. The problem-solving approach used is the Graph Method and CRAFT Algorithm. The results of the research show that material handling costs are reduced by 7.58% or Rp. 17,765 using the CRAFT algorithm.

Sign in / Sign up

Export Citation Format

Share Document