scholarly journals CRYOGENIC ACCUMULATION OF ELECTRICITY GENERATED USING RENEWABLE ENERGY SOURCES

2021 ◽  
pp. 22-27
Author(s):  
V.Ya. Braverman ◽  
B.K. Ilienko
Keyword(s):  
Renewable Energy ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Lithium Ion ◽  
Energy Sources ◽  
High Accumulation ◽  
Accumulation Coefficient ◽  
Standard Equipment ◽  
Storage Devices ◽  
Wind Power Plants

Possibilities and prospects of accumulation of the electric power generated on objects of renewable energy sources - solar and wind power plants, with use of cryogenic liquids are considered. A comparison of the three most common ways of accumulating electricity: using lithium-ion batteries, hydrogen, liquid air. According to the proposed technology, the efficiency of recovery of electricity from liquid air is from 54 to 70%. The developed technology is based on cryogenic and thermal accumulation and has a high accumulation coefficient. It is shown that energy storage in cryogenic storage devices is the cheapest today. The proposed technology can also be used to generate electricity from liquefied natural gas using standard equipment developed by industry. The technological scheme of the cryoaccumulating station is offered. Bibl. 10, Fig. 1, Table 1.

scholarly journals CALCULATION OF OPTIMAL PARAMETERS FOR STORAGE AND RENEWABLE ENERGY SOURCES IN ISOLATED ENERGY SYSTEMS

2021 ◽  
pp. 91-95
Author(s):  
Mykhailo Syvenko ◽  
Oleksandr Miroshnyk
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power Supply ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Electric Energy ◽  
Energy Sources ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Supply Systems

A detailed substantiation of the use of electric energy storage devices in the presence of generators on renewable energy sources in the power supply system is given. The dependence of the storage parameters on the composition and priority of generation in the system is investigated. The solution of the problem of determining the parameters of electricity storage devices by means of purposeful simulation of generation parameters is considered. The results of the choice of power and capacity of the energy storage using technical and economic indicators are shown. Optimal parameters of electric energy storage devices as one of the most important means of ensuring the activity of isolated power supply systems together with selection of generating devices are determined. The results of calculations of capacity of renewable energy sources in isolated power supply systems in combination with classical energy sources are given. The necessity of using the principle of activity of the distribution electric network and the possibility of its realization is demonstrated. The optimal storage capacity as a function of the share of renewable generation, the non-integrated energy produced by renewable sources and the total storage capacity are plotted for several isolated systems. The main points of the used model of the power supply system of isolated networks are given. In the studied isolated power supply systems, wind power plants and solar power plants, which have significant unpredictability of generation, are used as generation based on renewable energy sources. The problem of undersupply of electricity to the grid by stepwise increase of generation is analysed. The results of the multi-step selection of power and energy consumption of electricity storage are determined by technical criteria.

scholarly journals Special Aspects of Using the Wind Power Plants In the Power Supply System

2021 ◽  
Vol 288 ◽  
pp. 01003
Author(s):  
Saken Koyshybaevich Sheryazov ◽  
Sultanbek Sansyzbaevich Issenov ◽  
Ruslan Maratbekovich Iskakov ◽  
Argyn Bauyrzhanuly Kaidar
Keyword(s):  
Renewable Energy ◽  
Smart Grid ◽  
Wind Power ◽  
Wind Turbines ◽  
Power Plants ◽  
Power Grid ◽  
Renewable Energy Sources ◽  
Power Grids ◽  
Energy Sources ◽  
Wind Power Plants

The paper describes special aspects of using the wind power plants (wind turbines) in the power grid. The paper provides the classification and schematic presentation of AC wind turbines, analyzes the role, place and performance of wind power plants in Smart Grid systems with a large share of renewable energy sources. The authors also reviews a detailed analysis of existing AC wind turbines in this paper. Recommendations are given for how to enhance the wind power plants in smart grids in terms of reliability, and introduce the hardware used in the generation, conversion and interface systems into the existing power grid. After the wind power plants had been put online, the relevance of the Smart Grid concept for existing power grids was obvious. The execution of such projects is assumed to be financially costly, requires careful study, and development of flexible algorithms, but in some cases this may be the only approach. The analysis of using wind turbines shows that the structural configuration of wind power plants can be based on the principles known in the power engineering. The approaches may differ, not fundamentally, but in engineering considerations. it is necessary to point out that the method of controlling dual-power machines is quite comprehensive so that their wide use will face operational problems caused by the lack of highly professional specialists in electric drives. Therefore, it seems advisable to use square-cage asynchronous generators in wide applications. The paper shows that as the renewable energy sources are largely used in power grids, there is an issue of maintaining the power generation at a required level considering the variability of incoming wind energy. This results in the malfunctions in the operation of relay protection devices and emergency control automatics (RP and ECA), and the complicated control. Also, the standards of the CIS countries and regulatory documents miss the requirements for the wind turbine protections, taking into account their specialty causing the inefficient standard protective logic, which does not work correctly in a number of abnormal and emergency operating modes, and especially Smart Grid in power grids.

Problems and Risks of Renewable Energy Sources

2021 ◽  
Vol 18 (4) ◽  
pp. 28-47
Author(s):  
Yu. I. Sokolov
Keyword(s):  
Renewable Energy ◽  
Power Plants ◽  
Fossil Fuels ◽  
Renewable Energy Sources ◽  
Electricity Production ◽  
Energy Sources ◽  
Renewable Generation ◽  
Solar Panels ◽  
Huge Amount ◽  
Wind Power Plants

The article analyzes the problems and risks of new-fangled renewable energy sources in the 21st century, which can radically change the energy picture of the world and to a certain extent reduce the risk of climate change. However, energy generation from wind is usually available 25—35% of the time, from the sun — 10—25%.Renewable energy sources (RES) face the problem of accumulating or supporting capacities that should replace the unstable generation of RES at the time of inevitable failures. RES cannot exist without excess reserve capacities on traditional energy carriers that can quickly increase and reduce electricity production. Abandoning hydrocarbons in the next 30—50 years looks unrealistic if countries want to maintain their competitiveness. The growth of the share of RES in the global energy balance is an extremely politicized phenomenon.The development of renewable generation creates risks for consumers. Especially for large ones. One of these risks is associated with the intermittent, unstable nature of renewable generation, which in recent years has been understood mainly as solar and wind power plants. In addition, to produce more solar panels, wind turbines and batteries for electric vehicles, humanity will need more specific resources — rare earth metals. The production of these metals is unsafe for the environment. It involves the consumption of a huge amount of water and electrical energy.Renewable energy sources may dominate, but it will take centuries. Demand is already growing, but fossil fuels will live long enough.

scholarly journals A Study for the Optimal Exploitation of Solar, Wind and Hydro Resources and Electrical Storage Systems in the Bormida Valley in the North of Italy

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5291
Author(s):  
Stefano Bracco
Keyword(s):  
Renewable Energy ◽  
Wind Power ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Green Energy ◽  
Energy Sources ◽  
Medium Size ◽  
Low Carbon ◽  
The North ◽  
Wind Power Plants

The exploitation of distributed renewable energy sources leads to a low-carbon energy transition, mainly based on the optimal integration of hydro, PV and wind power plants with the remaining high-performance fossil-fuel power stations. In the last twenty years, European Union (EU) countries have shown a significant increase of the power installed in new PV and wind power plants, together with the refurbishment of small and medium size hydro stations. In particular, in Italy, PV and wind energy production has strongly increased and nowadays there are regions characterized by a very green energy mix. In this new scenario, energy storage becomes a viable solution to mitigate the variability of renewable energy sources thus optimizing the network operation. The present paper is focused on the Liguria region, in the North of Italy and in particular on the Bormida Valley where nowadays more than the half of the annual electricity consumption is covered by the renewable energy local production. The paper describes the current energy situation and proposes an optimization tool to investigate the possibility of installing new PV and wind power plants, as well as energy intensive storage units based on sodium-sulphur batteries; moreover, different scenarios are analyzed through the definition of economic and environmental key performance indicators.

scholarly journals Self-generated power supply of agricultural enterprises based on renewable energy sources

2020 ◽  
Vol 175 ◽  
pp. 11009
Author(s):  
Nikolay Rudenko ◽  
Valery Ershov ◽  
Viacheslav Evstafev
Keyword(s):  
Renewable Energy ◽  
Wind Power ◽  
Power Supply ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Power Installation ◽  
Horizontal Wind ◽  
Energy Sources ◽  
Wind Power Plants ◽  
Wind Power Installation

The article contains the following technical proposals for the power supply of autonomous agricultural facilities using renewable energy sources: the use of hybrid solar-wind power plants, the use of vortex wind power plants with a vertical axis to use both the energy of horizontal wind flows and the energy of upward air flows. The structure and operation algorithm of an autonomous power supply system based on a hybrid solarwind power plant and a diesel generator for autonomous agricultural facilities of small and medium power in regions where there is no distribution electric network are proposed. This system will allow for insufficient wind load to ensure reliable power supply to an autonomous agricultural facility with minimal use of diesel fuel. The design of a vortex wind power installation has been developed. The fastening on the shaft of the wind power installation of a conical helical blade with a variable radius, decreasing in the direction from the lower to the upper cut of the socket, improves the efficiency of the installation. The proposed installation makes it possible to use small winds and low-potential thermal ascending air currents, reduce low-frequency vibration and noise, and also increase the stability and efficiency of use of wind energy.

scholarly journals Competitiveness of Solar and Wind Power Plants in the Countries of the Commonwealth of Independent States

2020 ◽  
Vol 63 (4) ◽  
pp. 301-311
Author(s):  
O. V. Marchenko ◽  
S. V. Solomin
Keyword(s):  
Renewable Energy ◽  
Central Asia ◽  
Wind Power ◽  
Wind Turbines ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Wind Power Plants ◽  
Independent States ◽  
Favorable Conditions

Techno-economic indicators of renewable (solar and wind) and non-renewable energy sources are systematized, taking into account the interval of their uncertainty for the conditions of the countries of the Commonwealth of Independent States (CIS). The main attention was paid to Russia and the countries of Central Asia (Kazakhstan, Kyrgyzstan, Tajikistan, Turkmenistan and Uzbekistan), where there are the most favorable conditions for the development of solar and wind energy. A comparison of renewable and non-renewable energy sources by the criterion of the cost of generated electricity has been made. It is shown that the payment for greenhouse gas emissions increases the competitiveness of solar and wind power plants in the energy markets. Under favorable conditions for renewable energy, solar and wind installations in some areas can produce cheap electricity at a cost of 3–5 cents/(kW×h). With such values, they can be competitive without additional measures to stimulate their implementation. Using the mathematical model REM-2 (Renewable Energy Model), energy sources of different types were compared taking into account system effects. The power supply system consists of photovoltaic converters, wind turbines that enable the possibility of short-term accumulation of electricity and power consumption from a backup power source. Modeling of photoelectric converters and wind turbines operating modes was performed by time (hours) for different values of solar radiation arrival and wind speed. The optimal ratios between electricity production by photovoltaic converters and wind turbines, as well as the optimal level of electricity consumption from the network under different climatic and economic conditions, were determined. The economic efficiency of joint use of solar and wind energy in the CIS countries, primarily in Russia (with the exception of the northern regions) and the countries of Central Asia, is shown.

scholarly journals Analyzing Trade in Continuous Intra-Day Electricity Market: An Agent-Based Modeling Approach

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3860
Author(s):  
Priyanka Shinde ◽  
Ioannis Boukas ◽  
David Radu ◽  
Miguel Manuel de Manuel de Villena ◽  
Mikael Amelin
Keyword(s):  
Renewable Energy ◽  
Electricity Market ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Thermal Power ◽  
Agent Based Modeling ◽  
Market Liquidity ◽  
Energy Sources ◽  
Modeling Framework ◽  
Agent Based

In recent years, the vast penetration of renewable energy sources has introduced a large degree of uncertainty into the power system, thus leading to increased trading activity in the continuous intra-day electricity market. In this paper, we propose an agent-based modeling framework to analyze the behavior and the interactions between renewable energy sources, consumers and thermal power plants in the European Continuous Intra-day (CID) market. Additionally, we propose a novel adaptive trading strategy that can be used by the agents that participate in CID market. The agents learn how to adapt their behavior according to the arrival of new information and how to react to changing market conditions by updating their willingness to trade. A comparative analysis was performed to study the behavior of agents when they adopt the proposed strategy as opposed to other benchmark strategies. The effects of unexpected outages and information asymmetry on the market evolution and the market liquidity were also investigated.

scholarly journals Scalable Multiport Converter Structure for Easy Grid Integration of Alternate Energy Sources for Generation of Isolated Voltage Sources for MMC

Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1779
Author(s):  
Syed Rahman ◽  
Irfan Khan ◽  
Khaliqur Rahman ◽  
Sattam Al Otaibi ◽  
Hend I. Alkhammash ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Energy Resources ◽  
Energy Sources ◽  
Renewable Energy Resources ◽  
Component Level ◽  
Storage Devices ◽  
Multiport Converter ◽  
Detailed Simulation ◽  
The Individual

This paper presents a novel, scalable, and modular multiport power electronic topology for the integration of multiple resources. This converter is not only scalable in terms of the integration of multiple renewable energy resources (RES) and storage devices (SDs) but is also scalable in terms of output ports. Multiple dc outputs of a converter are designed to serve as input to the stacking modules (SMs) of the modular multilevel converter (MMC). The proposed multiport converter is bidirectional in nature and superior in terms of functionality in a way that a modular universal converter is responsible for the integration of multiple RES/SDs and regulates multiple dc output ports for SMs of MMC. All input ports can be easily integrated (and controlled), and output ports also can be controlled independently in response to any load variations. An isolated active half-bridge converter with multiple secondaries acts as a central hub for power processing with multiple renewable energy resources that are integrated at the primary side. To verify the proposed converter, a detailed design of the converter-based system is presented along with the proposed control algorithm for managing power on the individual component level. Additionally, different modes of power management (emulating the availability/variability of renewable energy sources (RES)) are exhibited and analyzed here. Finally, detailed simulation results are presented in detail for the validation of the proposed concepts and design process.

Power Cycles of Generation III and III+ Nuclear Power Plants

2014 ◽  
Author(s):  
Alexey Dragunov ◽  
Eugene Saltanov ◽  
Igor Pioro ◽  
Pavel Kirillov ◽  
Romney Duffey
Keyword(s):  
Renewable Energy ◽  
Natural Gas ◽  
Thermal Efficiency ◽  
Nuclear Power ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Thermal Power ◽  
Electrical Energy ◽  
Energy Sources ◽  
Thermal Power Plants

It is well known that the electrical-power generation is the key factor for advances in any other industries, agriculture and level of living. In general, electrical energy can be generated by: 1) non-renewable-energy sources such as coal, natural gas, oil, and nuclear; and 2) renewable-energy sources such as hydro, wind, solar, biomass, geothermal and marine. However, the main sources for electrical-energy generation are: 1) thermal - primary coal and secondary natural gas; 2) “large” hydro and 3) nuclear. The rest of the energy sources might have visible impact just in some countries. Modern advanced thermal power plants have reached very high thermal efficiencies (55–62%). In spite of that they are still the largest emitters of carbon dioxide into atmosphere. Due to that, reliable non-fossil-fuel energy generation, such as nuclear power, becomes more and more attractive. However, current Nuclear Power Plants (NPPs) are way behind by thermal efficiency (30–42%) compared to that of advanced thermal power plants. Therefore, it is important to consider various ways to enhance thermal efficiency of NPPs. The paper presents comparison of thermodynamic cycles and layouts of modern NPPs and discusses ways to improve their thermal efficiencies.

Sign in / Sign up

Export Citation Format

Share Document