scholarly journals Sifat Mekanika Kayu Tumeh (Combretocarpus rotundatus Dans) pada Arah Radial

2020 ◽  
Vol 7 (2) ◽  
pp. 163-170
Author(s):  
Wahyu Supriyati ◽  
Alpian Alpian
Keyword(s):  
Building Materials ◽  
Chemical Properties ◽  
Comprehensive Understanding ◽  
Central Kalimantan ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Different Diameters ◽  
Physical And Chemical ◽  
And Chemical Properties

Communities in Kalimantan areas need wood for building materials. They use Tumeh wood (Combretocarpus rotundatus Dans) because of its found abundantly in forest area in Central Kalimantan. Tumeh is a kind of pioneer. Wood parts affect the quality of wood. The purpose of this study was to study the effect of the radial position on the mechanical properties of wood tumeh. The properties of the wood analyzed is hardness, Modukus of Rupture (MOR) and Mdukus of Elasticity (MOE) (British Standard No.373,1957). Data analysis using Completely Randomized Design (CRD. The results show that the location in the radial direction has no significant effect on hardness, MOR and MOE values.The highest value of hardness and MOR was near the bark and then decreased in the middle and near the heart, respectively. Meanwhile, the highest MOE value is near the heart, then decreases in the middle and near the bark, respectively This research can be continued on the physical and chemical properties of the wood for a more comprehensive understanding. Research in different directions and at different diameters can also be carried out as a comparison.

scholarly journals CHARACTERIZATION OF SORGUM MUFFIN (Sorghum bicolor) OF KD 4 VARIETY WITH SOAKING GRAIN AND SORGUM FLOUR CONCENTRATION TREATMENT

2021 ◽  
Vol 18 (1) ◽  
pp. 37
Author(s):  
Ita Yustina ◽  
Ana Nurhasanah ◽  
SS. Antarlina
Keyword(s):  
Physical Properties ◽  
Chemical Properties ◽  
Sorghum Flour ◽  
Randomized Design ◽  
Sorghum Grains ◽  
Completely Randomized Design ◽  
Physical And Chemical ◽  
And Chemical Properties

<p class="Abstrak"><span lang="EN-GB">By processing sorghum grains into flour, the use of sorghum grains to support food diversification can be made more varied. The research objective was to determine the physical and chemical properties of sorghum muffins and changes of physical properties of sorghum muffins during storage. The research uses a completely randomized design with two factor, grain soaking duration (hours) and ratio of concentration of whole sorghum flours with gluten flour (%) and consists of nine treatments combination. The result shows that treatment has a significant effect on the power expansion, degree of brightness, fat, and preference for organoleptic properties. The best treatment was 24-hours of soaking, 25% whole sorghum flour, 75% gluten flour that produces expanded power at 138,83%, degree of brightness (L) at 67.03, redness (a) at +4.33, yellowness (b) at +27.37, water content of 12.59%, protein content of 6.95%, fat content of 2.46%, score of color at 3.20, texture score at 3.13, aroma score at 3.16, taste score at 3.24, and for overall acceptance at 3.53 (like). Changes of physical properties of sorghum muffins during storage for 3 days can be explained with the linear equation. For all parameter (weight loss, volume loss, brightness loss), the value of constant a in the equation of sorghum muffin was lower than control muffin that indicated quality loss of sorghum muffins is higher than control muffin. Increasing the concentration of sorghum flour resulted a decrease in the quality of the muffins. The soaking treatment of the seeds in making sorghum flour can maintain the quality of the muffin.</span></p>

scholarly journals Physical and Chemical Characteristic of Halal Gelatin Extracted from Buffalo Hide with Addition of Pineapple Rind at Different Ratio

2019 ◽  
Vol 1 (1) ◽  
pp. 1-4
Author(s):  
Aprizal Aprizal ◽  
Irdha Mirdhayati ◽  
Yendraliza Yendraliza
Keyword(s):  
Islamic Law ◽  
Chemical Properties ◽  
Chemical Characteristic ◽  
Ash Content ◽  
Physical And Chemical Properties ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Physical And Chemical ◽  
Extraction Agent ◽  
And Chemical Properties

The production of halal gelatin from buffalo hide waste which is animal be slaughtered according to Islamic law and using pineapple rind as an extraction agent was an alternative to produce halal gelatin. The availability of buffalo hide in Riau Province was stable and its hide had high protein content. This research was conducted to produced and determine the characteristics of halal gelatin from buffalo hide using solution of pineapple skin in terms of their physical and chemical properties. The Completely Randomized Design (CRD) was experimental design used with consist of 3 treatments and 4 replications. The treatment was ratio hide :  pineapple rind solution, namely 3:1, 3:2 , 3:3 w/v. The parameters observed were yield, viscosity, color, pH, ash content and moisture content. The results showed that immersion of buffalo hide in the solution of pineapple rind at different ratio gave highly significant increased the viscosity and ash content of gelatin but not significant effect to yield percentage , color, pH and moisture of gelatin. The yield percentage ranging from 5.99-7.33%, pH 4.83-4.85, viscosity was 1.95-2.20 cP, color 0.54-0.71 absorbance unit, ash 0.25-, 032% and moisture 9.97-9.99%. It can be concluded that the best treatment was ratio 3:2 and 3 : 3 according to had viscosity, pH, color, ash and moisture in line with the standard of gelatin by Gelatin Manufacture Institute of America (GMIA).

scholarly journals PERTUMBUHAN BIBIT KELAPA SAWIT (Elaeis quineensis Jacq) PADA MEDIUM ULTISOL YANG DIAPLIKASI KOMPOS Mucuna bracteata

2021 ◽  
Vol 35 (3) ◽  
pp. 125-134
Author(s):  
Taufik Ristumoyo Rambe ◽  
Adiwirman ◽  
Wawan
Keyword(s):  
Oil Palm ◽  
Elaeis Guineensis ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
Soil Medium ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Physical And Chemical ◽  
Acidity Level ◽  
And Chemical Properties

The first problem faced in cultivating oil palm is the procurement of seeds. Ultisol soil when used for breeding media has several problems such as having a wet saturation of less than 35% at a depth of 125 cm below the upper limit of the argillic horizon.  Ultisol has an acidity level of less than 5.5, low to moderate organic matter and low nutrition. The addition of organic material such as the LCC Mucuna bracteata compost is highly recommended because it will improve the physical, biological, and chemical properties of the soil, so that it increases the availability of nutrients in the soil to be optimal. This study aims to determine the effect of LCC mucuna bracteata compost on ultisol soil medium and determine the dosage/dose of LCC Mucuna Bracteata compost which provides the best growth of oil palm seedlings (Elaeis guineensis Jacq). This research was carried out experimentally with a Completely Randomized Design (CRD), consisting of 5 treatments and 4 replications. The results of this study indicate that distributing doses of 400 g/8 kg of soil improved the physical and chemical properties of the soil and the vegetative growth of oil palm seeds.

scholarly journals KUALITAS FISIK DAN KIMIA TELUR PINDANG MENGGUNAKAN DAUN JAMBU BIJI (Psidium guajava L) SERTA GARAM NaCl DENGAN KONSENTRASI BERBEDA

ZOOTEC ◽  
2020 ◽  
Vol 40 (2) ◽  
pp. 615
Author(s):  
Sasmita Nusi ◽  
Merri D. Rotinsulu ◽  
Moureen Tamasoleng ◽  
Rahmawaty Hadju
Keyword(s):  
Chemical Properties ◽  
Psidium Guajava ◽  
Chemical Quality ◽  
Physical Chemical ◽  
Randomized Design ◽  
Physical And Chemical Quality ◽  
Guava Leaves ◽  
Physical And Chemical ◽  
And Chemical Properties

PHYSICAL AND CHEMICAL QUALITY OF PINDANG EGGS USING GUAVA LEAVES (PSIDIUM GUAJAVA L) AND NACL SALT WITH DIFFERENT CONCENTRATIONS. This study aims to determine the physical and chemical quality of pindang eggs using guava leaves and NaCl salt with different concentrations. The material used was  egg, guava leaves, NaCl salt. This research used complete randomized design (CRD) with a factorial of 3x3 with 3 times replicated. Factor A consists of guava leaves  with 3 levels namely 2.5%, 5%, and 7.5%. Factor B consists of NaCl salt with 3 levels namely 2.5%, 5%, and 7.5%. Analysis of the variance showed that the distribution of guava leaves and NaCl salt was significant (P<0.01) on egg weight, moisture, gel forces, and non significant (P>0.01) on pH. Based on the results of such studies, it can be concluded that the best for the physical and chemical properties of the pindang egg was treatment of  7.5% of guava leaves and 7.5% of the NaCl salt.Keywords: Pindang Eggs, Guava Leaves, NaCl Salt, Physical-Chemical Properties

scholarly journals Influence of physical and chemical properties of soybean grains on drying process

2020 ◽  
Vol 9 (8) ◽  
pp. e745986504
Author(s):  
Thiago Aurélio Arruda-Silva ◽  
Nahyara Batista Caires Galle ◽  
Carlos Caneppele ◽  
Niédja Marizze Cezar Alves
Keyword(s):  
Thermodynamic Properties ◽  
Chemical Properties ◽  
Randomized Design ◽  
Grain Drying ◽  
Lower Volume ◽  
Completely Randomized Design ◽  
Grain Properties ◽  
Physical And Chemical ◽  
Statistical Criteria ◽  
And Chemical Properties

Grain drying can be influenced by many factors and energetic knowledge of this process is essential. The objective was to evaluate the influence of soybean grain properties on drying kinetics and thermodynamic properties. Four soybean cultivars were studied through sphericity, circularity, volume, oil content, total protein and initial moisture in a completely randomized design. Drying was performed at temperatures of 40 and 60 °C, adjusting six mathematical models. By the statistical criteria different models were selected to the cultivars, which were used in the thermodynamic properties’ calculations. The cultivar C with lower volume presented higher drying rate and higher constant k, which presented lower activation energy 23.81 kJ mol-1. The thermodynamic properties of Gibbs enthalpy, entropy and free energy were mainly influenced by volume, being lower for cultivar C.

scholarly journals PENGARUH PERSENTASE PEREKAT TAPIOKA TERHADAP KARAKTERISTIK BRIKET ARANG TEMPURUNG KELAPA

2021 ◽  
Vol 4 (2) ◽  
pp. 324
Author(s):  
Norhikmah ◽  
Noor Mirad Sari ◽  
Muhammad Faisal Mahdie
Keyword(s):  
Chemical Properties ◽  
Ash Content ◽  
Coconut Shell ◽  
Physical And Chemical Properties ◽  
Heating Value ◽  
Astm Standard ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Physical And Chemical ◽  
And Chemical Properties

Tapioka flour as an adhesive for coconut shell charcoal briquettes can affect the characteristics of charcoal briquettes consisting of physical and chemical properties. The purpose of this study was to determine the physical properties of coconut shell charcoal briquettes in several adhesive percentages. The method used was a completely randomized design pattern and in this study there was only one factor (factor = coconut shell charcoal and tapioca adhesive/starch), as many as 5 treatments with 3 replicatins = 15 samples to be tested. Charakteristics of coconut shell charcoal briquettes that meet ASTM standard : water content that entered ASTM standard (Max 6%) in treatment A2 (95% coconut shell charcoal + 5% tapioca adhesive), the best density is found in treatment A3 (90% coconut shell charcoal + 10% tapioca adhesive)and enter ASTM standard(1.0-1.2 g / cm3), ash content that falls within the ASTM standard (Max 18%) in treatment A3(90% coconut shell charcoal + 10% tapioca adhesive), flying substancs that comply with ASTM standard (19-28%) in treatment A3 (90% charcoal coconut shell + 10% tapioca adhesive), bonded carbon content which is included in the ASTM standard (at least 58%) in treatment A2 (95% coconut shell charcoal + 5% tapioca adhesive),and the best heating value is found in the treatment A3 ( 90% coconut shell charcoal + 10% tapioca adhesive) which falls within the ASTM standard (4000-6500 cal / g). The results of this study indicate that the percentage of tapioca adhesive can affect the characteristics of coconut shell charcoal briquetess.Keywords: Percentage of tapioca adhesive; Charcoal briquettes; Coconut shell

scholarly journals Effect of Slice Weight and Soaking Time on the Physico-Chemical Properties of Cassava Flour (Manihotesculentus) used for Bakery Products

2021 ◽  
pp. 10-24
Author(s):  
C. R. Abah ◽  
C. N. Ishiwu ◽  
J. E. Obiegbuna ◽  
E. F. Okpalanma ◽  
C. S. Anarado
Keyword(s):  
Chemical Properties ◽  
Process Variables ◽  
Soaking Time ◽  
Cassava Flour ◽  
Baked Goods ◽  
Cassava Root ◽  
Physico Chemical ◽  
Physical And Chemical ◽  
And Chemical Properties

Quality cassava(Manihotesculentus, Crantz) flour is often influenced by process variables such as slice weight and soaking time which may affect its nutritional quality. In this study, the effect of process variables (slice weight and soaking time) on quality of cassava flour was carried out. Cassava root was peeled, washed and cut into varied sizes (25.86 - 54.14 g) and soaked at varied time (7.03 - 40.97 h). The proximate composition, physical and chemical properties of the flour were carried out using standard methods. The result in our findings showed that slice weight and soaking time had significant increase (p<0.05) on the proximate and physico-chemical properties of the flour.The amylose and amylopectin content of the flour increased with increasing soaking time while the hydrogen cyanide content decreased with increase in soaking time. Overall, the quality cassava flour displayed desirable properties for its incorporation into baked goods.

scholarly journals Some physical and chemical properties of substrates designed for container production of spruce (Picea abies (L) Karst)

2004 ◽  
pp. 79-90
Author(s):  
Vesna Vratusa
Keyword(s):  
Woody Plants ◽  
Low Cost ◽  
Chemical Properties ◽  
Foreign Markets ◽  
Urban Green Spaces ◽  
Nursery Production ◽  
Countries In Transition ◽  
Physical And Chemical ◽  
And Chemical Properties

Efficient nursery production of woody plants, as well as the level of their successful application in urban green spaces, greatly depends upon properties of substrates in which these individuals grow, develop and endure. Furthermore, quality of substrate does not only affect the quality of future product (plant individual or green space), but distinctly determines its price. This element, extremely significant for all countries in transition, thus Serbia as well, commands finding ways of making qualitative, but least expensive substrate. The most logical solution is to use mixtures/substrates of precisely defined properties, composed of domestic components. Results presented in this paper imply that it is possible to create precisely such standard mixtures from domestic resources at relatively low cost, adjusted to needs of particular species, which would ultimately lead to successful, non-expensive nursery production and application of produced stock, both on domestic and foreign markets.

scholarly journals Effect of Bentonite on the Pelleting Properties of Iron Concentrate

2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
Hao Liu ◽  
Bing Xie ◽  
Yue-lin Qin
Keyword(s):  
Water Absorption ◽  
Chemical Properties ◽  
Poor Quality ◽  
Physical And Chemical Properties ◽  
Iron Concentrate ◽  
Green Ball ◽  
Shock Temperature ◽  
Physical And Chemical ◽  
And Chemical Properties

The physical and chemical properties such as particle size, montmorillonite content, swelling degree, water absorption, and blue absorption of A, B, and C bentonites were studied under laboratory conditions. The effects of adding different quality and different proportion of bentonite on falling strength, compression strength, and shock temperature of green pellet were investigated. The experimental results show that the montmorillonite content, water absorption, and methylene blue absorption of bentonite-B are the highest. And the quality of bentonite-B is the best, followed by bentonite-C and bentonite-A poor quality. When the amount of bentonite-B reduced from 1.5% to 1.0%, the strength of green pellets and the shock temperature both decrease. As the same proportion of A, B, and C bentonites, the green-ball strength and shock temperature are as follows: bentonite-A > bentonite-B > bentonite-C.

scholarly journals EFEITOS DE DIFERENTES SUBSTRATOS NA PRODUÇÃO DE MUDAS DE Sebastiania commersoniana

FLORESTA ◽  
2013 ◽  
Vol 43 (3) ◽  
pp. 407 ◽  
Author(s):  
Horácia Celina Armando Mula Boene ◽  
Antonio Carlos Nogueira ◽  
Nilton José Sousa ◽  
Dagma Kratz ◽  
Paulo Vitor Dutra de Souza
Keyword(s):  
Chemical Properties ◽  
Pine Bark ◽  
Forest Nursery ◽  
Coconut Fiber ◽  
Technical Feasibility ◽  
Rice Hulls ◽  
Controlled Irrigation ◽  
Physical And Chemical ◽  
And Chemical Properties

O objetivo do presente trabalho foi avaliar a viabilidade técnica da utilização de diferentes substratos para a produção de mudas de Sebastiania commersoniana e relacionar suas características físicas e químicas com a qualidade das mudas produzidas. Para tanto, foram formulados 22 substratos, os quais tiveram suas propriedades físicas e químicas avaliadas, sendo a semeadura realizada em tubetes de 120 cm³, acondicionados em casa de sombra, com irrigação controlada. Para a análise dos resultados, foram feitas avaliações de altura, diâmetro de colo, biomassa seca aérea e radicial, facilidade de retirada do tubete, agregação das raízes ao substrato, índice de qualidade de Dickson e relação altura e diâmetro de colo aos 180 dias. De acordo com os resultados obtidos, conclui-se que o melhor substrato testado foi o substrato comercial à base de casca de pinus. Os componentes renováveis, casca de arroz carbonizada, fibra de coco e substrato comercial à base de casca de pinus, apresentaram-se viáveis tecnicamente para produção de mudas de branquilho, enquanto que a casca de arroz carbonizada pura e vermiculita fina não apresentaram viabilidade. No que se refere às propriedades dos substratos, apenas a densidade aparente, pH, Ca e P apresentaram correlação com as variáveis biométricas das mudas. AbstractEffects of different substrates in production of Sebastiania commersoniana seedling. The aim of this research was to evaluate technical feasibility of using different substrates for production of seedlings of Sebastiania commersoniana and relate physical and chemical characteristics to the quality of the produced seedlings. In order to that, 22 substrates were formulated, with their physical and chemical properties evaluated, sowed in tubes of 120 cc, and put in shade, under controlled irrigation. For the results analysis, it evaluated height, stem diameter, air and radicial biomass, ease of removability, root aggregation to the substrate, Dickson quality index, and relation of height and diameter at 180 days. According to the obtained results, the best substrate tested was the commercial pine bark based substrate. The renewable components, carbonized rice hulls, coconut fiber, and commercial pine bark based substrate presented technical feasibility to produce Sebastiania commersoniana seedlings, on the other hand pure carbonized rice hulls and fine vermiculite did not. Towards the properties of the substrates, only bulk density, pH, Ca, and P correlated with biometric variables of the seedlings.Keywords: Branquilho; carbonized rice hulls; coconut fiber; pine bark; forest nursery.

Sign in / Sign up

Export Citation Format

Share Document