scholarly journals Optimal Design of Steel Curved Roof Frames by Enhanced Vibrating Particles System Algorithm

2019 ◽  
Author(s):  
Ali Kaveh ◽  
Seyed Rohollah Hoseini Vaez ◽  
Pedram Hosseini ◽  
Mohsen Bakhtyari
Keyword(s):  
Optimal Design ◽  
Cross Section ◽  
Slope Angle ◽  
Discrete Variables ◽  
Factors Affecting ◽  
Two Factors ◽  
And Performance ◽  
Structural Loading ◽  
Tapered Members ◽  
Continuous And Discrete Variables

The paper presents an optimal design of steel curved roof frames with its roof being part of a circular arc. The elements of frames are tapered I-section members. In the objective function for optimization, two factors affecting the weight of frames are considered simultaneously. First, the roof slope angle as an effective variable on the values of the structural loading and second, the cross-section of members that are considered as continuous and discrete variables, respectively. In the range of 3 to 70 degrees, the optimum range of roof slope angles for steel curved roof frames, as well as precise value of the best roof slope angle, will be reported. Enhanced Vibrating Particles System (EVPS) algorithm is utilized for the optimal design of steel curved roof frames with tapered members. The performance and efficiency of the EVPS algorithm is compared with six other recently developed optimization algorithms including VPS, GWO, HS, SSA, ECBO and GOA algorithms. The effectiveness and performance of EVPS algorithm is proven. Frames design are performed using ANSI/AISC 360-05 specifications which strength, displacement and stability constraints are imposed on the frames.

Measuring and Dealing with the Uncertainty of SOA Solutions

2012 ◽  
pp. 265-294 ◽  
Author(s):  
Yuhui Chen ◽  
Anatoliy Gorbenko ◽  
Vyachaslav Kharchenko ◽  
Alexander Romanovsky
Keyword(s):  
Web Services ◽  
Web Service ◽  
Fault Injection ◽  
Practical Experience ◽  
Service Development ◽  
Factors Affecting ◽  
Average Value ◽  
Two Factors ◽  
And Performance ◽  
Major Factors

The chapter investigates the uncertainty of Web Services performance and the instability of their communication medium (the Internet), and shows the influence of these two factors on the overall dependability of SOA. We present our practical experience in benchmarking and measuring the behaviour of a number of existing Web Services used in e-science and bio-informatics, provide the results of statistical data analysis and discuss the probability distribution of delays contributing to the Web Services response time. The ratio between delay standard deviation and its average value is introduced to measure the performance uncertainty of a Web Service. Finally, we present the results of error and fault injection into Web Services. We summarise our experiments with SOA-specific exception handling features provided by two web service development kits and analyse exception propagation and performance as the major factors affecting fault tolerance (in particular, error handling and fault diagnosis) in Web Services.

scholarly journals Optimal Design of Pitched Roof Rigid Frames with Non-Prismatic Members Using Quantum Evolutionary Algorithm

2019 ◽  
Author(s):  
Hamed Arzani ◽  
Ali Kaveh ◽  
Mohammad Kamalinejad
Keyword(s):  
Optimal Design ◽  
Evolutionary Algorithm ◽  
Cross Section ◽  
Optimization Algorithm ◽  
High Speed ◽  
Binary Code ◽  
Search Space ◽  
Design Constraints ◽  
The Cross ◽  
Tapered Members

The weight and shape of the gable and multi-span frames (mono and two-span pitched roof) with tapered members, as a familiar group of the pitched roof frames, are highly dependent on the properties of the member cross-section. In this work a quantum inspired evolutionary algorithms, so-called Quantum evolutionary algorithm (QEA) [1], are utilized for optimal design of one gable frame and a multi-span frame in five alternatives with tapered members. In order to optimize the frames, the design is performed using the AISC specifications for stress, displacement and stability constraints. The design constraints and weight of the gable and multi-span frames are computed from the cross-section of members. These optimum weights are obtained using aforementioned optimization algorithm considering the cross-section of members and design constraints as optimization variables and constraints, respectively. A comparative study of the QEA and some recently developed methods from literature is also performed to illustrate the performance of the utilized optimization algorithm and its featuring. Furthermore, optimal design of a multi-span frame is compared with the solution of other methods including the same conditions and constraints. This study indicates the power of QEA in exploring and exploitation due the search space with using Q-gate and binary code for individual representation and updating. Binary code helps the QEA to find optimal solution even with minimum number of Q-bit individuals. High speed of this method is because of such a feature.

Hygienic assessment of learning environment conditions (by the example of higher educational institutions of the city of Ufa)

2020 ◽  
Vol 99 (4) ◽  
pp. 405-411
Author(s):  
Elena Ju. Gorbatkova
Keyword(s):  
Ionizing Radiation ◽  
Educational Institutions ◽  
Higher Educational Institutions ◽  
Factors Affecting ◽  
Republic Of Bashkortostan ◽  
Average Relative Humidity ◽  
Higher Educational ◽  
The Republic ◽  
And Performance ◽  
The City

Introduction. The important factors affecting health and performance of young people are the conditions of education, in particular, a comfortable microclimate in the classrooms of higher educational institutions. Materials and methods. In view of the urgency of this problem, an analysis was made of the microclimate parameters of educational organizations of different profiles (Ufa city, the Republic of Bashkortostan). 294 classrooms were studied in 22 buildings of 4 leading universities in Ufa. A total of 3,822 measurements were taken to determine the parameters of the microclimate. The analysis of ionizing radiation in the aerial environment of classrooms. There was performed determination of radon and its affiliated products content. In order to assess the conditions and lifestyle of students of 4 higher educational institutions of the city of Ufa, we conducted an anonymous survey of 1,820 students of I and IV years of education. Results. The average temperature in the classrooms of all universities studied was 23.9±0.09 C. The average relative humidity in all classrooms was 34.2 ± 0.42%. Analysis of ionizing radiation (radon and its daughter products decay) in the aerial environment of the classrooms and sports halls located in the basement determined that the average annual equivalent equilibrium volumetric activity of the radon daughter products (EROA ± Δ222Rn) ranged from 28 ± 14 to 69 ± 34.5 meter, which meets the requirements established by SanPiN. Conclusion. The hygienic assessment of the microclimate parameters of educational institutions of various profile revealed a number of deviations from the regulated norms. The results indicate the need to control the parameters of the microclimate, both from the administration of universities, and from the professors. According to the results of the study, recommendations were prepared for the management of higher educational institutions in Ufa.

Effects of openings on the seismic behavior and performance level of concrete shear walls

2019 ◽  
Author(s):  
Hossein Alimohammadi ◽  
Mostafa Dalvi Esfahani ◽  
Mohammadali Lotfollahi Yaghin
Keyword(s):  
Static Analysis ◽  
Cross Section ◽  
Seismic Behavior ◽  
Shear Walls ◽  
Shear Wall ◽  
Constant Cross Section ◽  
Added Resistance ◽  
Different Shapes ◽  
And Performance ◽  
Abaqus Software

In this study, the seismic behavior of the concrete shear wall considering the opening with different shapes and constant cross-section has been studied, and for this purpose, several shear walls are placed under the increasingly non-linear static analysis (Pushover). These case studies modeled in 3D Abaqus Software, and the results of the ductility coefficient, hardness, energy absorption, added resistance, the final shape, and the final resistance are compared to shear walls without opening.

Analysis of Financial Performance of Public Sector Banks in India: CAMEL

2020 ◽  
pp. 097674792096686
Author(s):  
Yudhvir Singh ◽  
Ram Milan
Keyword(s):  
Public Sector ◽  
Banking Sector ◽  
Positive Impact ◽  
Secondary Data ◽  
Capital Adequacy ◽  
Factors Affecting ◽  
Public Sector Banks ◽  
The Government ◽  
And Performance ◽  
Asset Quality

Public sector banks have been merged by the government in the last few years. This is the rationale behind conducting this study. The purpose of this article is to determine the factors affecting the performance of public sector banks in India and the interrelationship between bank-specific determinants and performance of public sector banks. In this article, we shall analyse the financial data of all the public sector commercial banks for a period spread across 11 years (2009–2019); Capital adequacy, Assets quality, Management efficiency, Earning, and Liquidity (CAMEL) has been used as a performance determinant; system generalised method of moments (GMM) analysis has been used to find the effect of determinants on the performance measurement of public sector banks; and CCA (canonical correlation analysis) has been used to find the interrelationship between the bank-specific determinants and the performance of public sector banks. The finding has important implications in terms of performance in the banking sector. Certain limitations of this study are: It is based on secondary data. The study only covers the financial aspects and not the non-financial aspects. It is found that the asset quality is negatively related with performance of public sector banks. Liquidity and inflation are inversely related to performance of public sector banks in India. Capital adequacy is positively related with banks’ performance, but inversely related with banks’ interest margin. GDP growth has a significant positive impact on banks’ performance, but inversely related with banks’ interest income. Inflation rate is inversely related with banks’ performance. Banking sector reforms are insignificantly related with banks’ performance.

Fish Price Determination Around Lake Victoria, Tanzania: Analysis of Factors Affecting Fish Landing Price

2021 ◽  
Vol 22 (2) ◽  
pp. 348-363
Author(s):  
Damian Boniface Sambuo ◽  
Stephen Kirama ◽  
Kitala Malamsha
Keyword(s):  
Lake Victoria ◽  
Regulatory Body ◽  
Price Determination ◽  
Cross Sectional ◽  
Factors Affecting ◽  
Fish Market ◽  
Fishery Policy ◽  
The Government ◽  
And Performance

Determination of fish landing price is important, as the same contributes to the structure, conduct and performance of the fish market in Lake Victoria. Determination of relevant landing price is a gap to console between fishermen, agents (middlemen), processors and the government. The main objective of this study was therefore to examine fish price determination. Specifically, to examine the methods for fish price determination and analyse factors that affect fish landing price in Lake Victoria, a cross-sectional design was employed, and 300 respondents were randomly selected from two district councils, namely, Sengerema and Buchosa. Both qualitative and quantitative data were analysed using descriptive statistics and inferential analysis. Findings show that landing price is determined through formal negotiation with processors, consultation with other traders, informal negotiation with buyers and Beach Management Unit (BMU). The study concluded that these are the common methods used to determine landing prices. Also, distance from fishing to onshore landing centres, market information channels, age and experiences of the fishermen are the factors significantly found affecting landing price. It is recommended that the mechanism for setting up fishery price, fish market structure, fishery information and the formation of fishery regulatory body needs fishery policy and sector reforms that mark the determination of fish landing price.

Sign in / Sign up

Export Citation Format

Share Document