scholarly journals Classification of Heart Rate Time Series Using Machine Learning Algorithms

2021 ◽  
Vol 2 (1) ◽  
Keyword(s):  
Detection System ◽  
Machine Learning Algorithms ◽  
Support Vector ◽  
Ecg Signal ◽  
Ecg Signals ◽  
Heart Patients ◽  
Extraction Step ◽  
Ecg Arrhythmia ◽  
Electrocardiogram Ecg ◽  
The Given

An important diagnostic method for diagnosing abnormalities in the human heart is the electrocardiogram (ECG). A large number of heart patients increase the assignment of physicians. To reduce their assignment, an automatic computer detection system is needed. In this study, a computer system for classifying ECG signals is presented. The MIT-BIH, ECG arrhythmia database is used for analysis. After the ECG signal is noisy in the preprocessing stage, the data feature is extracted. In the feature extraction step, the decision tree is used and the support vector machine (SVM) is constructed to classify the ECG signal into two categories. It is normal or abnormal. The results show that the system classifies the given ECG signal with 90% sensitivity.

scholarly journals Anticipating Atrial Fibrillation Signal Using Efficient Algorithm

2021 ◽  
Vol 17 (02) ◽  
pp. 106
Author(s):  
Mohand Lokman Ahmad Al-dabag ◽  
Haider Th. Salim ALRikabi ◽  
Raid Rafi Omar Al-Nima
Keyword(s):  
Atrial Fibrillation ◽  
Computational Cost ◽  
Extraction Methods ◽  
Support Vector ◽  
Ecg Signal ◽  
Heart Problem ◽  
Ecg Signals ◽  
The Right ◽  
Electrocardiogram Ecg ◽  
Low Computational Cost

One of the common types of arrhythmia is Atrial Fibrillation (AF), it may cause death to patients. Correct diagnosing of heart problem through examining the Electrocardiogram (ECG) signal will lead to prescribe the right treatment for a patient. This study proposes a system that distinguishes between the normal and AF ECG signals. First, this work provides a novel algorithm for segmenting the ECG signal for extracting a single heartbeat. The algorithm utilizes low computational cost techniques to segment the ECG signal. Then, useful pre-processing and feature extraction methods are suggested. Two classifiers, Support Vector Machine (SVM) and Multilayer Perceptron (MLP), are separately used to evaluate the two proposed algorithms. The performance of the last proposed method with the two classifiers (SVM and MLP) show an improvement of about (19% and 17%, respectively) after using the proposed segmentation method so it became 96.2% and 97.5%, respectively.

scholarly journals A SOLUTION FOR IMPROVEMENT OF ECG ARRHYTHMIA RECOGNITION USING RESPIRATION INFORMATION

2018 ◽  
Vol 56 (3) ◽  
pp. 335
Author(s):  
Tran Hoai Linh
Keyword(s):  
Signal Classification ◽  
Ecg Signal ◽  
Wavelet Filter ◽  
Ecg Signals ◽  
Additional Information ◽  
Neuro Fuzzy ◽  
Ecg Arrhythmia ◽  
Nonlinear Classifier ◽  
Electrocardiogram Ecg ◽  
Source Of Information

Electrocardiogram (ECG) and respiration signals are two basic and important and valuable biomedical signals as source of information used to determine a person's health status. However, ECG signals are usually of small amplitude and are susceptible to various noises such as: the 50Hz grid noise, poor electrodes’ contacts with the patient's skin, the patient's emotional variations, the respiration and movement of the patient... The idea in this paper by  filtering out the effect of the respiration in the ECG signal or by incorporating the information of breathing stage into the ECG signal classification the we can improve the reliability and accuracy of the arrythmia classification. This paper proposes a solution, which uses wavelet filter to reduce the effect of respiration in the ECG signals and will use additional information from the breathing rhythm (when available) to help better classifying the arrythmias. As the main nonlinear classifier we use the classical neuro-fuzzy TSK network. The proposed solution will be tested with data from the MIT-BIH and the MGH/MF databases.

scholarly journals ECG signal diagnoses using intelligent systems

2018 ◽  
Vol 7 (4) ◽  
pp. 2733
Author(s):  
Raaed Faleh Hassan ◽  
Sally Abdulmunem Shaker
Keyword(s):  
Cardiac Arrhythmias ◽  
Intelligent Systems ◽  
Fuzzy Inference ◽  
Accurate Diagnosis ◽  
Ecg Signal ◽  
Backpropagation Neural Network ◽  
Inference System ◽  
Ecg Signals ◽  
Heart Patients ◽  
Electrocardiogram Ecg

Accurate diagnosis of arrhythmias plays a crucial role in saving the lives of many heart patients. The aim of this research is to find the more efficient method to diagnosis electrocardiogram (ECG) diseases. This work presents the use of Backpropagation neural network (BPNN) and fuzzy logic for automatic detection of cardiac arrhythmias based on analysis of the ECG. These a more valuable tool used to classify ECG signals in cardiac patients. Data collected from physioBank ATM. The analysis of the ECG signal is performed in MATLAB environment. In BPNN the results appear that the only two misclassifications happened to result in an accuracy of 90.4%. while in fuzzy inference system the results appear that the classification accuracy is 100%.   

scholarly journals Detection of Atrial Fibrillation Based on Optimized Electrocardiogram (Ecg) Recordings

2019 ◽  
Vol 9 (2S3) ◽  
pp. 198-203
Keyword(s):  
Atrial Fibrillation ◽  
Genetic Algorithm ◽  
Support Vector ◽  
Svm Classifier ◽  
Ecg Signal ◽  
Ecg Signals ◽  
Public Dataset ◽  
Electrocardiogram Ecg ◽  
Heart Arrhythmias ◽  
Typical Process

Atrial fibrillation (AF) is one among the foremost common heart arrhythmias. It is terribly tough to discover unless a precise arrhythmia episode happens throughout the exploration. If the diagnosis and the treatment is delayed the Atrial fibrillation can lead to heart strokes and causes death, therefore automatic detection of AF is an urgent need. The analysis of ECG recordings is considered as one of the typical process of detecting AF. The ECG signals analysed by considering normal rhythm (N), other arrhythmias (O) and Atrial Fibrillation(A) and noises. In this paper the proposed technique is validated by considering open accessible public dataset. In the proposed method initially pre-processing of ECG signal is performed, next extraction of features, optimizing the features using genetic algorithm (GA) and finally classifying using support vector machine (SVM) classifier. The proposed algorithm achieves overall accuracy of 95.8% and by considering top 10 features the rate of accuracy is 96.8% which is better compared to the existing algorithm with an SNR of dB. The experimental results are performed using MATLAB and uggest that by availing the short ECG recording also the detection of AF is obtained accurately.

scholarly journals Classification of Heart conditions by Statistical Characterization of ECG Signal

2020 ◽  
Vol 16 (2) ◽  
Author(s):  
Asma Haque ◽  
Abdur Rahman
Keyword(s):  
Ventricular Tachyarrhythmia ◽  
Research Work ◽  
Ecg Signal ◽  
Statistical Characterization ◽  
Ecg Signals ◽  
Detection Algorithms ◽  
Heart Patients ◽  
Proposed Model ◽  
Electrocardiogram Ecg

Electrocardiogram (ECG) signal exhibits important distinctive feature for different cardiac issues. Automatic classification of electrocardiogram (ECG) signal can be used for primary detection of various heart conditions. Information about heart and ischemic changes of heart may be obtained from cleaned ECG signals. ECG signal has an important role in monitoring and diacritic of the heart patients. An accurate ECG classification is challenging problem. The accuracy often depends on proper selection of observing parameters as well as detection algorithms. Heart disorder means abnormal rhythm or abnormalities present in the heart. In this research work, we have developed a decision tree based algorithm to classify heart problems by utilizing the statistical signal characteristic (SSC) of an ECG signal. The proposed model has been tested with real ECG signal to successfully (60-98%) detect normal, apnea and ventricular tachyarrhythmia condition.

scholarly journals Efficiently Updating ECG-Based Biometric Authentication Based on Incremental Learning

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1568
Author(s):  
Junmo Kim ◽  
Geunbo Yang ◽  
Juhyeong Kim ◽  
Seungmin Lee ◽  
Ko Keun Kim ◽  
...  
Keyword(s):  
Incremental Learning ◽  
Physical State ◽  
Acceptance Rate ◽  
Support Vector ◽  
Ecg Signal ◽  
Biometric Authentication ◽  
False Acceptance Rate ◽  
Ecg Signals ◽  
Using Data ◽  
False Acceptance

Recently, the interest in biometric authentication based on electrocardiograms (ECGs) has increased. Nevertheless, the ECG signal of a person may vary according to factors such as the emotional or physical state, thus hindering authentication. We propose an adaptive ECG-based authentication method that performs incremental learning to identify ECG signals from a subject under a variety of measurement conditions. An incremental support vector machine (SVM) is adopted for authentication implementing incremental learning. We collected ECG signals from 11 subjects during 10 min over six days and used the data from days 1 to 5 for incremental learning, and those from day 6 for testing. The authentication results show that the proposed system consistently reduces the false acceptance rate from 6.49% to 4.39% and increases the true acceptance rate from 61.32% to 87.61% per single ECG wave after incremental learning using data from the five days. In addition, the authentication results tested using data obtained a day after the latest training show the false acceptance rate being within reliable range (3.5–5.33%) and improvement of the true acceptance rate (70.05–87.61%) over five days.

scholarly journals Two Electrode ECG And EOG System For Monitoring Applications

2019 ◽  
Vol 8 (11) ◽  
pp. 262-265
Keyword(s):  
Reference Electrode ◽  
Cost Effective ◽  
Electrode System ◽  
Ecg Signal ◽  
Biomedical Signal ◽  
Ecg Signals ◽  
Arm Position ◽  
The Stability ◽  
Electrocardiogram Ecg ◽  
Total Gain

Heart and Eye are two vital organs in the human system. By knowing the Electrocardiogram (ECG) and Electro-oculogram (EOG), one will be able to tell the stability of the heart and eye respectively. In this project, we have developed a circuit to pick the ECG and EOG signal using two wet electrodes. Here no reference electrode is used. EOG and ECG signals have been acquired from ten healthy subjects. The ECG signal is obtained from two positions, namely wrist and arm position respectively. The picked-up biomedical signal is recorded and heart rate information is extracted from ECG signal using the biomedical workbench. The result found to be promising and acquired stable EOG and ECG signal from the subjects. The total gain required for the arm position is higher than the wrist position for the ECG signal. The total gain necessary for the EOG signal is higher than the ECG signal since the ECG signal is in the range of millivolts whereas EOG signal in the range of microvolts. This two-electrode system is stable, cost-effective and portable while still maintaining high common-mode rejection ratio (CMRR).

scholarly journals Capturing Electrocardiogram Signals from Chairs by Multiple Capacitively Coupled Unipolar Electrodes

Sensors ◽  
2018 ◽  
Vol 18 (9) ◽  
pp. 2835 ◽  
Author(s):  
Zhongjie Hou ◽  
Jinxi Xiang ◽  
Yonggui Dong ◽  
Xiaohui Xue ◽  
Hao Xiong ◽  
...  
Keyword(s):  
Printed Circuit Board ◽  
Experimental Tests ◽  
Circuit Board ◽  
Signal Acquisition ◽  
Ecg Signal ◽  
Capacitively Coupled ◽  
Ecg Signals ◽  
Printed Circuit ◽  
Electrocardiogram Signals ◽  
Electrocardiogram Ecg

A prototype of an electrocardiogram (ECG) signal acquisition system with multiple unipolar capacitively coupled electrodes is designed and experimentally tested. Capacitively coupled electrodes made of a standard printed circuit board (PCB) are used as the sensing electrodes. Different from the conventional measurement schematics, where one single lead ECG signal is acquired from a pair of sensing electrodes, the sensing electrodes in our approaches operate in a unipolar mode, i.e., the biopotential signals picked up by each sensing electrodes are amplified and sampled separately. Four unipolar electrodes are mounted on the backrest of a regular chair and therefore four channel of signals containing ECG information are sampled and processed. It is found that the qualities of ECG signal contained in the four channel are different from each other. In order to pick up the ECG signal, an index for quality evaluation, as well as for aggregation of multiple signals, is proposed based on phase space reconstruction. Experimental tests are carried out while subjects sitting on the chair and clothed. The results indicate that the ECG signals can be reliably obtained in such a unipolar way.

Introduction and Implementation of Machine Learning Algorithms in R

2019 ◽  
pp. 126-147
Author(s):  
S. R. Mani Sekhar ◽  
G. M. Siddesh
Keyword(s):  
Machine Learning ◽  
Neural Networks ◽  
Support Vector Machine ◽  
Discriminant Analysis ◽  
Computer Science ◽  
Learning Algorithms ◽  
Machine Learning Algorithms ◽  
Support Vector ◽  
Linear Discriminant ◽  
The Given

Machine learning is one of the important areas in the field of computer science. It helps to provide an optimized solution for the real-world problems by using past knowledge or previous experience data. There are different types of machine learning algorithms present in computer science. This chapter provides the overview of some selected machine learning algorithms such as linear regression, linear discriminant analysis, support vector machine, naive Bayes classifier, neural networks, and decision trees. Each of these methods is illustrated in detail with an example and R code, which in turn assists the reader to generate their own solutions for the given problems.

Wireless Heart Abnormality Monitoring Kit Based on Raspberry Pi

2018 ◽  
Vol 35 ◽  
pp. 96-108
Author(s):  
Khudhur A. Alfarhan ◽  
Mohd Yusoff Mashor ◽  
Abdul Rahman Mohd Saad ◽  
Mohammad Iqbal Omar
Keyword(s):  
Heart Diseases ◽  
Normal Sinus Rhythm ◽  
Features Extraction ◽  
Raspberry Pi ◽  
Support Vector ◽  
Ecg Signal ◽  
Statistical Features ◽  
Classification Approach ◽  
Ecg Signals ◽  
Heart Monitoring

Heart monitoring kits are only available for bedridden patients and the traditional heart monitoring kits have many wires that are obstacle patients’ mobility. Most of the existing heart monitoring kits can not detect heart diseases. Thus, the current study proposed a wireless heart monitoring kit to monitor patients with a heart abnormality. The proposed kit can detect and classify four arrhythmia types as well as normal ECG with high accuracy. The design and development of the wireless heart abnormality monitoring kit (WHAMK) in this research were divided into three stages. These stages are the development of an arrhythmias detection and classification method using artificial intelligence approach, design and implementation of the kit hardware, and design and coding of the kit software. Arrhythmias classification approach is divided into four stages, namely obtaining the electrocardiograph (ECG) signals, preprocessing, features extraction and classification. The features extraction method are based on statistical features. The library support vector machine (LIBSVM) was used to classify the ECG signals. The hardware of the kit is divided into two parts, namely ECG body sensor (EBS), and processing and displaying unit (PDU). EBS working on acquiring the ECG signal from patient's body. PDU working on processing the collected ECG signal, plotting it and detecting the arrhythmias. Arrhythmias classification approach was developed by using statistical features and LIBSVM. They were implemented in the software of the kit to enable it to detect the arrhythmias in the real-time and fully automatically. The kit can detect and classify four arrhythmia types as well as normal sinus rhythm (NSR). These types of arrhythmia are premature atrial contraction (PAC), premature ventricles contraction (PVC), Bradycardia and Tachycardia. The proposed kit gave a good accuracy for detecting and classifying Arrhythmia with the overall accuracy of 96.2%.

Sign in / Sign up

Export Citation Format

Share Document