scholarly journals Seed Yield and Quality of Lowland Rice (Oryza sativa L.) as Influenced by Nitrogen from Organic and Chemical Sources

2016 ◽  
Vol 13 (1) ◽  
pp. 109-118
Author(s):  
Amina Khatun ◽  
Hasina Sultana ◽  
A B M Jamiul Islam ◽  
Md Sultan Uddin Bhuiya ◽  
Md Abu Saleque
Keyword(s):  
Seed Yield ◽  
Seed Quality ◽  
Block Design ◽  
Poultry Manure ◽  
Optimum Dose ◽  
Cow Dung ◽  
Rice Seed ◽  
Yield And Quality ◽  
Seed Yields

A field experiment was conducted at the Bangladesh Rice Research Institute (BRRI) experimental farm during boro season of 2010-11 to determine the effect of nitrogen from organic and chemical sources on rice seed yield and quality. Six treatments- (i) N-control, ii) Optimum dose of nitrogen (164 kg N ha-1) from urea, iii) 50% N from urea and 50% N from CD (cow dung), iv) 50% N from urea and 50% N from PM (poultry manure), v) 100% N from CD and vi) 100% N from PM were compared. The experiment was conducted in a randomized complete block design with four replications. Two boro varieties – BRRI dhan28 and BRRI dhan29 were used as test crops. The urea + PM treatment gave similar seed yields to that of urea in both the varieties. The PM treatment gave similar seed yield to that of urea + PM in BRRI dhan28, but BRRI dhan29 gave significantly lower seed yield in PM than the urea + PM. Sole cowdung or poultry manure application produced significantly lower seed yield than urea + PM treatment and sole urea application. The application of N from cowdung and poultry manure had no effect on rice seed quality as compared to that obtained with urea.The Agriculturists 2015; 13(1) 109-118

scholarly journals Plant spacing and pollen quantity on yield and quality of squash seeds

2003 ◽  
Vol 21 (3) ◽  
pp. 443-447 ◽  
Author(s):  
Márcio S. de Lima ◽  
Antonio I. I. Cardoso ◽  
Marcelo F. Verdial
Keyword(s):  
Seed Yield ◽  
Seed Quality ◽  
Block Design ◽  
Fruit Production ◽  
Plant Spacing ◽  
Plant Seed ◽  
Yield And Quality ◽  
Randomized Complete Block Design ◽  
Pollen Quantity

Squash seeds yield and quality can be improved by proper population plant spacing and the pollen quantity, which influences the pollination quality and fertilization. Nine experiments were conducted as a factorial combination of three spacing between plants (0.8 x 0.3, 0.8 x 0.6 and 0.8 x 0.9 m), two quantities of pollen (50% of an anther and another entire one) and natural insect pollination. Seed and fruit production parameters, and seed quality were evaluated. A randomized complete block design, five replications, with ten plants per plot was adopted. Larger plant spacing increased the average number of mature fruits and seed yield per plant. Seed yield was directly proportional to the amount of pollen used during pollination. Higher amounts of pollen resulted in higher seed yield per area, but the plant spacing did not affect this characteristic. Manual pollination, using a whole anther, did not differ from natural pollination in relation to seed yield and quality.

Effect of preharvest applications of glyphosate on the drying, yield and quality of canola

2000 ◽  
Vol 80 (2) ◽  
pp. 433-439 ◽  
Author(s):  
A. L. Darwent ◽  
K. J. Kirkland ◽  
L. Townley-Smith ◽  
K. N. Harker ◽  
A. J. Cessna
Keyword(s):  
Brassica Rapa ◽  
Seed Yield ◽  
Seed Quality ◽  
Canola Seed ◽  
Moisture Contents ◽  
Yield And Quality ◽  
Seed Moisture ◽  
Seed Content ◽  
Seed Yields

Potential use of preharvest applications of glyphosate in canola (Brassica rapa L.) in western Canada both as a harvest aid and to control weeds prompted this study. Experiments were conducted from 1988 to 1990 at four locations in the region to document the effectiveness of preharvest applications of glyphosate to enhance canola seed and foliage drydown and to measure the effect of such applications on seed yield and quality. Glyphosate was applied in early August to early September at rates of 0.45, 0.90 and 1.70 kg acid equivalent ha−1 to canola with seed moisture contents ranging from 79 to 12%. Seed and foliage moisture drydown were not enhanced by glyphosate treatment. Glyphosate treatments generally had little or no effect on canola seed yields, seed weight, seed germination, green seed content or oil content except when applied when the pods were green and when seed moisture contents were high. Seed/pod moisture was not a reliable indicator of stage of canola development and thus, should not be used alone as an indicator of when preharvest applications of glyphosate can be applied to canola without decreasing seed yield and quality. Key words: Glyphosate, canola, Brassica rapa L., preharvest application, desiccation, seed quality

EFFECTS OF CHEMICAL DESICCATION VERSUS SWATHING ON SEED YIELD AND QUALITY OF FABABEANS (VICIA FABA)

1980 ◽  
Vol 60 (4) ◽  
pp. 1115-1121 ◽  
Author(s):  
M. F. BETTS ◽  
I. N. MORRISON
Keyword(s):  
Vicia Faba ◽  
Seed Yield ◽  
Seed Quality ◽  
Yield And Quality ◽  
Seed Yields

Fababean plants were swathed or desiccated with diquat [6,7-dihydrodipyrido (1,2-A:2′, 1′-C) pyrazinediium salt] at four stages of maturity corresponding to the time when 0, 10, 25 and 50% of the pods had turned from green to black. Over the 3 yr of the study no significant differences were observed between seed yields from swathed or desiccated plants. Regardless of whether the plants were swathed or desiccated, yields and seed quality tended to be higher from plants which had 25% or more black pods at the time of treatment. Desiccating before 25% of the pods have turned black may have a more serious effect on reducing seed quality than swathing before the recommended time. By desiccating prematurely, there is a risk of reducing seed quality by significantly increasing the number of discolored or shrivelled seeds.

scholarly journals The influence of mineral nutrition, stage of harvest and flower position on seed yield and quality of phaseolus Vulgaris L.

1981 ◽  
Author(s):  
Μιχαήλ Γαβράς
Keyword(s):  
Seed Yield ◽  
Plant Nutrition ◽  
Seed Quality ◽  
Mother Plant ◽  
Yield And Quality ◽  
Phosphorus And Potassium ◽  
Flower Position ◽  
Seed Yields ◽  
Nitrogen Phosphorus

In this work the effects of mother plant nutrition and flower position on the plant in relation to different harvest stages on French beans (Phaseolus vulgaris L. cv. Cascaded; seed yield, quality and progeny performance have been studied. In three pot experiments under glass and one in the field, different levels of nitrogen, phosphorus, potassium and molybdenum were applied to the mother plant and it was found that higher seed yields were obtained with the higher nutrient levels tested, but these high seed yields were not necessarily accompanied by high quality. Seed yield and quality increased with the increase of nitrogen and potassium. The phosphorus effect however, was different, in that the seed yield increased in relation to the levels but the seed quality decreased. Molybdenum was found to be necessary in moderate amounts, especially for the seed quality. The interactions between nitrogen and phosphorus levels (NP) and between nitrogen, phosphorus and potassium (NPK) were found to be very important for bean seed quality, because their significant effect was similar and constantly present in most of the seed vigour components examined. It seems that the combinations of high nitrogen levels with moderate amounts of phosphorus applied to the mother plant resulted in seed of good quality. In one pot experiment under glass the progeny performance was examined, using seed from the 1st mother plant nutrition experiment and it was found that the mother plant nutrition affected the progeny in it*s early stages. This effect disappeared later and no difference in progeny seed yield was found. In two pot experiments under glass the bean pods were harvested at different stages and the pods from the main axis were separated from the pods on the secondary branches grown mainly from the axils of the primary leaves. It was found that the quality of seed from the secondary branches was lower than the quality of seed from the main axis. However, this difference in seed quality became less with the later harvests. The following tests were used to assess seed quality: the official germination test, seedling evaluation test, cold test, and electrical conductivity test. In addition, the seed size was determined and the seeds were analysed for total nitrogen, phosphorus and potassium content.

Post harvest seed quality of greengram as influenced by pre-harvest spray of insecticides

2016 ◽  
Vol 50 (2) ◽  
Author(s):  
B. N. Raghu ◽  
Rai Prashant Kumar ◽  
Basave Gowda ◽  
N. Manjunatha ◽  
Rajeshwari S. Alur
Keyword(s):  
Seed Yield ◽  
Methyl Parathion ◽  
Seed Quality ◽  
Block Design ◽  
Quality Parameters ◽  
Yield And Quality ◽  
Yield Parameters ◽  
Randomized Block Design ◽  
Two Factors

The experiment was conducted to study the effect of insecticides and stages of insecticidal sprays on seed yield and yield components in greengram. The investigation was carried out in Department of Genetics and Plant Breeding, during <italic>Kharif</italic> 2012. The experiment was laid in factorial randomized block design (FRBD) consisted of 15 treatment combinations involving two factors with three replications. Among the five test insecticides, spraying of malathion @ 2 ml/l recorded significantly more number of pods/plant (20.75), pod weight (20.45g), seed yield/plant (3.17 g), seed yield/hectare (949 kg) and less percentage of infested pods (5.35%) as well as infested seeds/plant (2.66%). It was followed by nimbicidine and methyl parathion. Whereas reciprocal values for these seed yield parameters were noticed in the unsprayed control plants (16.13, 16.53g, 1.84g, 725 kg, 14.13% and 7.89%, respectively). Similar results were recorded in spraying of insecticides at 20 and 10 Days before harvest compare to 20 or 10 Days before harvest. Interaction effect between insecticides and stages of insecticidal spraying were found non-significant for most of the seed yield and quality parameters.

scholarly journals Effect of zinc and boron on seed yield and quality of onion (Allium cepa L.)

2021 ◽  
Vol 16 (1) ◽  
pp. 87-92
Author(s):  
S. H. Arunkumar ◽  
Jitendra Kumar S. Hilli ◽  
D. S. Uppar
Keyword(s):  
Seed Yield ◽  
Zinc Sulphate ◽  
Seed Quality ◽  
Foliar Application ◽  
Block Design ◽  
Foliar Spray ◽  
Quality Parameters ◽  
Seedling Vigour ◽  
Yield And Quality

The field experiment was carried out in the olericulture unit, MARS, University of Agricultural Sciences, Dharwad during 2019-2020 to study the effect of zinc and boron on seed yield and quality of onion on variety cv. Bhima super at different levels of both basal and foliar application. The treatments consists of soil application of zinc sulphate (5 kg/ha and 10 kg/ ha), Borax (4 kg/ha and 6 kg/ha) and foliar application of zinc sulphate (0.25 % and 0.5 %), Borax (0.1 % and 0.2 %) and control without micronutrient application replicated thrice in a Randomized Block Design. The foliar application was given at 45 days after bulb planting. From the present investigation, a significant increase in seed yield and quality parameters were recorded with foliar spray of zinc sulphate (0.5 %) and borox (0.2 %) viz., seed yield per plant (4.29 g), seed yield per plot (214.13 g) and seed yield per hectare (9.91q/ha). The germination percentage was found maximum from the treatment foliar application of zinc sulphate (0.5 %) (84.8%) and the other seed quality parameters was found best from the treatment foliar spray of ZnSO4 (0.5%) and B (0.2 %) i.e., higher shoot length (8.83 cm), root length (7.21 cm), seedling vigour index (1352) and test weight (3.75 g). The non-significant differences were observed due to influence of soil and foliar application of zinc and boron on electrical conductivity and seedling dry weight.

scholarly journals Assessing the Response of Sesame to Inorganic and Organic Nutrient Sources

2019 ◽  
Vol 12 (1) ◽  
pp. 108
Author(s):  
Paul Anguria ◽  
George N. Chemining’wa ◽  
Richard N. Onwonga ◽  
Michael A. Ugen
Keyword(s):  
Seed Yield ◽  
Finger Millet ◽  
Crop Residues ◽  
Seed Quality ◽  
Block Design ◽  
Mineral Fertilizers ◽  
Fertilizer Rate ◽  
Nutrient Sources ◽  
Randomized Complete Block Design

Sesame (Sesamum indicum. L) is one of the main sources of livelihoods in northern Uganda. However, its production is constrained by low soil fertility and moisture levels. A study was conducted at Serere, Uganda in 2013 and 2014 to investigate the effect of organo-mineral fertilizers on growth, seed yield and nutritional quality of sesame. The design of the experiment was a randomized complete block design with three replications. The treatments comprised: control (no soil amendment), mixtures of 4 crop residues each at (3 and 6 t/ha) and two rates of N, P and K. Finger millet husks (3 t/ha) plus lower fertilizer rate (30 kg N-25 kg P-40 Kg K/ha) had significantly higher seed yield of sesame; while finger millet husks (6 t/ha) plus higher fertilizer rate (60 kg N-50 kg P-80 Kg K/ha) significantly increased vegetative growth of sesame. Finger millet husks (6 t/ha) plus lower fertilizer rate had significantly higher seed crude protein content of sesame; while cowpea husks (3 t/ha) plus higher fertilizer rate and groundnut shells (3 t/ha) plus lower fertilizer rate produced significantly higher seed total ash and seed oil content of sesame, respectively. This study has demonstrated that application of a mixture of crop residues and inorganic fertilizers is the best treatment in enhancing growth, seed yield and nutritional seed quality of sesame.

Preharvest glyphosate in alfalfa for seed production: Effect on alfalfa seed yield and quality

2003 ◽  
Vol 83 (1) ◽  
pp. 189-197 ◽  
Author(s):  
W. E. May ◽  
H. A. Loeppky ◽  
D. C. Murrell ◽  
C. D. Myhre ◽  
J. J. Soroka
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Seed Quality ◽  
Seedling Emergence ◽  
Canada Thistle ◽  
Seedling Vigour ◽  
Yield And Quality ◽  
Alfalfa Seed ◽  
Medicago Sativa L ◽  
Seed Yields

Preharvest applications of glyphosate have been shown to be effective in controlling Canada thistle in annual crops, but may reduce alfalfa seed yield depending on time and rate of application. The objective of this study was to determine the effect of preharvest applications of glyphosate on subsequent alfalfa seed yield and quality. The effects of timing, 1, 26, 51 and 76% alfalfa seed pod maturity, and rate, 0, 440, 880, 1320, and 1760 g a.i. ha-1, of a preharvest application of glyphosate on alfalfa seed yield and quality in the year of application, and regrowth and seed yield in the following year were determined. The rate of glyphosate applied did not affect seed yield in the application year; however, in the following year, growth and seed yield were reduced as rates increased. Delaying the application of glyphosate increased seed yields in the application year, but decreased alfalfa regrowth and flowering the following year. Germination and seedling emergence were not affected by the rate or timing of the glyphosate. A preharvest application of glyphosate at 1760 g a.i. ha-1 at 76% pod maturity is a viable option in the last year of seed production. Key words: Alfalfa (Medicago sativa L.), glyphosate, abnormal seeds, seed quality, and seedling vigour

scholarly journals Treatment of rice seeds with salicylic acid: seed physiological quality and yield

2014 ◽  
Vol 36 (3) ◽  
pp. 352-356 ◽  
Author(s):  
Lizandro Ciciliano Tavares ◽  
Cassyo Araújo Rufino ◽  
Sandro de Oliveira ◽  
André Pich Brunes ◽  
Francisco Amaral Villela
Keyword(s):  
Salicylic Acid ◽  
Seed Yield ◽  
Seed Treatment ◽  
Seed Quality ◽  
Rice Seed ◽  
Promising Alternative ◽  
Seed Industry ◽  
Physiological Quality ◽  
Rice Seeds

Seed treatment with growth regulators, especially salicylic acid, is a promising alternative to the seed industry because it is an important inducer of resistance to diseases and pests, as well as acting significantly on quality and seed yield. The objective of this study was to evaluate the performance of rice seed treated with different concentrations of salicylic acid, as well as assess the crop yield and seed quality. The treatments consisted of increasing levels of 0, 50, 100, 150 and 200 mg.L-1 salicylic acid. To this was prepared a stock solution of salicylic acid and the highest concentration by successive dilution in distilled water, the other concentrations were obtained. The physiological quality of seeds produced was treated and evaluated by tests of vigor and germination, and after harvest were evaluated seed yield. It follows that treatment of rice seeds with salicylic acid concentrations up to 130 mg.L-1 at a dose of 2 mL.kg-1 seed does not affect the germination and affects the strength, however provides substantial increases in the yield of seeds. The seed treatment with salicylic acid has no influence on seed quality produced.

A review of copper fertilizer management for optimum yield and quality of crops in the Canadian Prairie provinces

2006 ◽  
Vol 86 (3) ◽  
pp. 605-619 ◽  
Author(s):  
S. S. Malhi ◽  
R. E. Karamanos
Keyword(s):  
Seed Yield ◽  
Growth Stage ◽  
Field Experiments ◽  
Seed Quality ◽  
Soil Analysis ◽  
Growth Stages ◽  
Canadian Prairie ◽  
Cu Deficiency ◽  
Yield And Quality

Deficiency of copper (Cu) in Canadian prairie soils is not widespread, but whenever it occurs it can cause a drastic reduction in seed yield and quality of most cereals, especially wheat. Field experiments conducted in western Canada indicated that broadcast-incorporation of granular Cu fertilizers prior to seeding at 3-5.6 kg Cu ha-1 was usually sufficient to prevent Cu deficiency in wheat, and improve seed yield and quality. At lower rates (< 2.0 kg Cu ha-1), broadcast-incorporation of granular Cu fertilizers was not effective, while surface spray-broadcast followed by incorporation of liquid Cu fertilizers was much more effective in increasing seed yield of wheat in the first year of application. Surface broadcast without incorporation and seedrow-placed granular Cu fertilizers were much less effective in improving seed yield of wheat than their foliar or soil-incorporated applications. In the growing season, foliar applications of Cu at 0.20 to 0.28 kg Cu ha-1 to wheat at the Feekes 6 (first node of stem visible at base of shoot or stem elongation), Feekes 10 (sheath of last leaf completely grown or flag-leaf) and early boot growth stages were very effective in restoring seed yield, while Cu applications at the Feekes 2 (four-leaf) or Feekes 10.5 (complete heading) growth stage did not have a consistent effect to correct damage caused by Cu deficiency. Some Cu fertilizers (e.g., Cu oxide) were less effective than others in preventing/correcting Cu deficiency. Soil application at relatively high rates produced residual benefits in increasing seed yield for a number of years. The sensitivity of crops to Cu deficiency is usually in the order (wheat, flax, canary seed) > (barley, alfalfa) > (timothy seed, oats, corn) > (peas, clovers) > (canola, rye, forage grasses). Stem melanosis in wheat was associated with deficiency of Cu in soil, and the disease was reduced substantially with Cu application. A high level of available P in soil was observed to induce/increase severity of Cu deficiency in wheat. Soil analysis for diethylene triamine pentacetic acid- (DTPA) extractable Cu in soil can be used as a good diagnostic tool to predict Cu deficiency, but there was a poor relationship between total Cu concentration in shoots and the degree of Cu deficiency in crops. Application of Cu fertilizers to wheat on Cu-deficient soils also generally improved seed quality. Key words: Application time, Cu source, foliar application, granular Cu, growth stage, placement method, rate of Cu, seedrow-placed Cu, soil incorporation, wheat

Sign in / Sign up

Export Citation Format

Share Document