scholarly journals Performance Evaluation of BRRI Power Weeder for Low Land Rice (Oryza sativ L.) Cultivation

2017 ◽  
Vol 15 (1) ◽  
pp. 40-48
Author(s):  
AKM Saiful Islam ◽  
MT Islam ◽  
M Sh. Islam ◽  
AKM Lutfor Rahman ◽  
MA Rahman
Keyword(s):  
Grain Yield ◽  
Weed Control ◽  
Crop Production ◽  
Block Design ◽  
Rice Variety ◽  
Field Performance ◽  
Field Capacity ◽  
Control Device ◽  
Effective Field ◽  
Hand Weeding

Mechanical intervention in crop production is increasing rapidly in Bangladesh. Researchers are finding ways to manage weeds in rice field using suitable mechanical devices instead of conventional hand weeding. A study was conducted to evaluate the field performance of BRRI (Bangladesh Rice Research Institute) power weeder compared to BRRI weeder and hand weeding in the farmers’ field at Rashidpur in Mithapukur upazila under Rangpur district during boro season of 2014-15. Three treatments: T1 = BRRI weeder (BW), T2 = BRRI power weeder (BPW) and T3 = Hand weeding (HW) were used in the experiment. The experiment was carried out in a randomized complete block design (RCBD) and replicated in four farmers’ plots. Rice variety BRRI dhan28 was selected for the experiment. The effective field capacity of BW and BPW was found to be 0.06 and 0.09 ha hr-1, respectively. The weeding efficiency was the highest in HW (92%), followed by BPW (78%) and BW (73%). It was found that BW damaged the lowest number of plants (9%) compared to BPW (11%) during weeding operation, although the damaged plants recovered after a few days. BW and BPW reduced 74 and 85% of labor requirement in weeding operation compared to HW. The highest weeding cost was involved in HW (Tk. 4287 ha-1) compared to BW (Tk. 1103 ha-1) and BPW (Tk. 950ha-1). Weed control methods exerted insignificant effect on grain yield. BRRI power weeder and BRRI weeder reduced weeding cost, enhanced weed control and improved the labor efficiency without sacrificing grain yield. The highest BCR was obtained in BPW (1.22) followed by BW (1.16) and HW (1.11). BRRI power weeder and BRRI weeder appeared to be economic, easy and also environmentally safe weed control device in low land rice cultivation. The Agriculturists 2017; 15(1) 40-48

scholarly journals Techno-economic performance of 4-row self-propelled mechanical rice transplanter at farmers field in Bangladesh

2016 ◽  
Vol 27 (3) ◽  
pp. 369-382
Author(s):  
AKMS Islam ◽  
MA Rahman ◽  
AKML Rahman ◽  
MT Islam ◽  
MI Rahman
Keyword(s):  
Crop Production ◽  
Block Design ◽  
Rice Variety ◽  
Labor Demand ◽  
Field Capacity ◽  
Labor Cost ◽  
Labor Requirement ◽  
Seedbed Preparation ◽  
The Cost ◽  
Input Cost

Mechanical transplanting is an emerging technology in Bangladesh agriculture. Deadong DP480 rice transplanter was used to conduct the experiment which is imported from South Korea and China. The performance of this machine needs to be thoroughly investigated in local condition. This experiment was conducted in Boro (2015) season in the farmers’ field at Gosaidanga in Shailkupa upazila under Jhenaidah district and at Rashidpur in Mithapukur upazila under Rangpur district. Two treatments, i.e. T1 = Hand transplanting (HT) and T2 = Mechanical transplanting (MT) were used in the experiment. The experiment was carried out in randomized complete block design (RCBD) and replicated in six plots in each location. Rice variety BRRI dhan28 was used to conduct the experiment in both locations. Fuel consumption of 4-row walking type mechanical transplanter obtained 5.25 L/ha. The field capacity and field efficiency of rice transplanter   obtained 0.11-0.12 ha/hr and 64-70 percent, respectively. Conventional seedbed preparation required 37-55 man-hr/ha whereas 71-77 man-hr/ha required in mat type seedling suitable for mechanical transplanting. Labor requirement in hand and mechanical transplanting ranged from 123-150 and 9.0-10.5 man-hr per hectare which was 19-22 and 1.65-2.00 percent of total labor requirement in rice cultivation, respectively. Number of seedling tray requirement ranged from 215-230 per hectare. Calibration should be done on space and seedling density setting before operation in each plot to get optimum plant spacing and seedling tray requirement. Missing hill obtained 1-2 percent in mechanically transplanted plot. Mechanically transplanted plot showed significantly the higher grain yield (9-14%) than hand transplanted method due to use of infant seedling. The input cost in the form of labor and material was found similar in hand transplanting whereas in mechanical transplanting, labor cost found 12 percent lower than material cost. The cost of growing mat type seedling for mechanical transplanter found 53 percent whereas the cost of raising traditional seedbed found 34 percent of the cost of hand transplanting. Mechanical transplanting reduced 1.8 percent input cost than hand transplanting in crop cultivation. BCR of MT and HT showed 1.18-1.19 and 1.03-1.06, respectively. Mechanical intervention in crop production drastically reduced the labor requirement which can offset the peak labor demand. Mechanical transplanting systems increased yield, improved labor efficiency, ensured timeliness in operation and faster transplanting.Progressive Agriculture 27 (3): 369-382, 2016

Allelopathic potential of marshpepper residues for weed management and yield of transplant Aman rice

2020 ◽  
Vol 30 (4) ◽  
pp. 379-386
Author(s):  
SK Pramanik ◽  
MR Uddin ◽  
UK Sarker ◽  
D Sarkar ◽  
F Ahmed ◽  
...  
Keyword(s):  
Grain Yield ◽  
Weed Management ◽  
Crop Production ◽  
Crop Residue ◽  
Crop Residues ◽  
Block Design ◽  
Allelopathic Potential ◽  
Weed Growth ◽  
3.0 T ◽  
Hand Weeding

An experiment was conducted at the Agronomy Field Laboratory, Bangladesh Agricultural University, Mymensingh, during the period from June to December 2016 to evaluate the effect of marshpepper (Polygonum hydropiper L.)  crop residues on weed management and crop performance of transplant aman rice. The experiment consisted of three cultivars viz.  BR11, BRRI dhan33 and BRRI dhan49 and five marshpepper crop residues treatment such as 0, 1.0, 2.0, 3.0 ton ha-1 and hand weeding. The experiment was laid out in a randomized complete block design (RCBD) with three replications. Five weed species belonging to four families infested the experimental plots. Weed population and weed dry weight were significantly affected by cultivar and crop residues treatment. The highest percent inhibition of all the studied weed was found by hand weeding. The second highest percent weed inhibition was found with the application of marshpepper residues at 3.0 t ha-1 which was 63.43, 63.43, 52.85, 52.40 and 59.12 percent for sabuj nakful (Cyperus difformis), chesra (Scirpus juncoides), shama (Echinochloa crusgalli) panikachu (Monochoria vaginalis) and panishapla (Nymphaea nouchali ) respectively. The maximum weed growth was noticed with the cultivar BRRI dhan33 variety and the minimum was found in the cultivar BRRI dhan49. The grain yield as well as the yield contributing characters produced by BRRI dhan49 was the highest among the studied varieties. The highest reduction of grain yield was obtained in no crop residue treatment. The highest number of effective tillers hill-1, number of grains panicle-1, 1000-grain weight, grain and straw yields were observed in marshpepper residues in hand weeding followed by 3.0 t ha-1 marshpepper crop residue. BRRI dhan49 produced the highest grain and straw yields under hand weeding followed by marshpepper residues 3.0 t ha-1 treatment. Results of this study indicate that marshpepper residues showed potentiality to inhibit weed growth and it has a significant effect on the yield of transplant aman rice. Therefore, marshpepper residues might be used as an alternative way for weed management effective and sustainable crop production. Progressive Agriculture 30 (4): 379-386, 2019

scholarly journals Effect of Herbicides and Sesbaniaco- Culture on Weed Management and Grain Yield of Direct Seeded Rice Variety Khumal-4 at Khumaltar Condition, Nepal

2016 ◽  
Vol 4 ◽  
pp. 121-127
Author(s):  
R K Bhattarai ◽  
D D Gautam ◽  
J D Ranjit ◽  
B S Chauhan
Keyword(s):  
Grain Yield ◽  
Weed Management ◽  
Field Experiments ◽  
Rice Yield ◽  
Block Design ◽  
Rice Variety ◽  
Knapsack Sprayer ◽  
Rice Season ◽  
Direct Seeded ◽  
Hand Weeding

Field experiments were conducted at the experimental field of Agronomy Division, Khumaltar, Nepal during 2012 and 2013 to find the effect of different herbicides on weed management and grain yield of direct seeded rice. The experiment was carried out in a Randomised Complete Block Design (RCBD ) with seven treatments in three replications. Khumal-4 rice variety was used with in all the seven treatments viz; W1 = Weedy Check (no weeding) ; W2 = Farmers practice ( two hand weeding) ; W3 =Pyrazosulfuron (pre) @ 20 g a.i /ha fb (followed by ) Bispyribac (post-emergence (post) @ 25 g a. i / ha ; W4 = Pyrazosulfuron (pre) @ 20 g a.i /ha fb Bispyribac (post) @ 25 g a. i / ha fb 2, 4 –D; W5= Oxadiargyl (pre-emergence (pre) @ 90 g a.i/ha fb Bispyribac (post) @ 25 g a. i / ha; W6 = Oxadiargyl (pre) @ 90 g a.i /ha fb Bispyribac (post) @ 25 g a. i / ha fb 2, 4- D @ 500 g a .i /ha ; W7 = Sesbania (soaked) fb 2, 4- D @ 500 g a.i / ha fb one hand weeding. Rice seeds were directly sown by seed drill machine at seed rate of 30 kg/ha. All the pre emergence herbicides were sprayed on the first day of rice sowing whereas the post emergence herbicides were sown on 20 -25 days after sowing (DAS) by using a knapsack sprayer. Sesbania seed were sown at 30 kg/ha as co-culture with rice on the same day as rice was sown by broadcasting. The Sesbania was knocked down at 30 DAS using 2, 4-D.The yield of rice in 2013 was less than that of 2012 which could be due to the less rainfall and uneven rain distribution during the rice season. The results showed that among the Pyrazosulfuron (pre) @ 20 g a.i /ha fb Bispyribac (post) @ 25 g a. i / ha fb 2, 4 –D was found effective in controlling weed population , biomass and producing highest grain yield of rice 6512 kg /ha in 2012 and 3190 kg/ha in 2013 followed by the treatment Sesbania co-culture (Soaked) fb 2, 4- D @ 500 g a.i/ ha fb one and weeding giving increased rice yield of 6499 kg/ha in 2012 and 2858 kg/ha in 2013.Agronomy Journal of Nepal (Agron JN) vol. 4, Page: 121-127, 2016  

scholarly journals MINIMUM TILLAGE NON-PUDDLED TRANSPLANTED RICE (ORYZA SATIVA L.): WEED CONTROL AND ECONOMICS UNDER CONSERVATION AGRICULTURE PRACTICE IN BANGLADESH

2021 ◽  
Vol 5 (2) ◽  
pp. 47-55
Author(s):  
Mohammad Mobarak Hossain ◽  
Mahfuza Begum ◽  
Abul Hashem ◽  
Md. Moshiur Rahman ◽  
Richard W. Bell
Keyword(s):  
Grain Yield ◽  
Weed Control ◽  
Crop Production ◽  
Oryza Sativa L ◽  
Conservation Agriculture ◽  
Conventional Tillage ◽  
Weed Density ◽  
Hand Weeding ◽  
Strip Tillage ◽  
Rice Residues

Crisis of agricultural laborers in South Asia’s rural zones is pushing to pursue a labor-saving conservation agriculture strategy for crop production and weed control. Non-puddled transplanting and mulching residues of the previous crop are being developed for rice-based cropping systems in Bangladesh to address this issue. Hence, the present study was undertaken to determine the effectiveness of strip tillage vs. conventional tillage combined with previous rice residues relative to herbicides and hand weeding on weed control and grain yield of winter rice during January-May in 2015 and 2016. Rice cv. BRRI dhan28 was transplanted with a combination of six treatments: puddled conventional tillage (CT)+3 hand weeding (HW) (Control); Preplant (PRE) herbicide (glyphosate)+non-puddled strip tillage (ST)+1HW; PRE+ST+pre-emergence (PE) herbicide (pendimethalin); PRE+ST+post-emergence (PO) herbicide (ethoxysulfuron-ethyl); PRE+ST+PE+PO; PRE+ST+weed-free (WF); and two levels of rice residues: no-residue (R0) vs. 50% standing residue (R50). The CT had done using a two-wheel tractor (2WT) by four ploughings and cross ploughings followed by levelling. A Versatile Multi-Crop Planter (VMP) was used for ST in a single pass operation. Over the two years, PRE+ST+PE+PO reduced weed density by 40% in the first year and 50% in the second year and weed biomass by 70% than CT+3HW in both years. Retention of 50% residue reduced weed density by 20% and biomass by 34%. The highest grain yield (12% higher than CT+3HW without residue) was obtained from PRE+ST+WF with 50% residue, while the highest BCR (47% higher over CT+3HW without residue) was obtained from PRE+ST+PE+PO with 50% residue.

scholarly journals Integration of chemical and manual control methods for sustainable weed management in inbred and hybrid rice

2017 ◽  
Vol 15 (2) ◽  
pp. 158-166
Author(s):  
Fahima Sultana Popy ◽  
AKM Mominul Islam ◽  
Ahmed Khairul Hasan ◽  
Md Parvez Anwar
Keyword(s):  
Grain Yield ◽  
Weed Control ◽  
Weed Management ◽  
Management Practices ◽  
Hybrid Rice ◽  
Block Design ◽  
Yield Attributes ◽  
Free Treatment ◽  
Randomized Complete Block Design ◽  
Hand Weeding

Herbicidal weed control is gaining popularity in the developing countries but its efficacy still remains unclear. Therefore, an experiment was conducted to find out appropriate weed management practices for inbred and hybrid rice. The experiment comprised of inbred and hybrid varieties (two of each), and eight weed control treatments arranged in randomized complete block design with three replicates. Hybrid varieties performed better in terms of yield attributes and yield than inbred varieties. The highest grain yield (5.3 t ha−1) was obtained from the hybrid Agrodhan-12 and the lowest one (4.3 t ha−1) was from inbred Binadhan-7. Weed free treatment resulted in the highest grain yield (6.1 t ha−1) and the lowest one was with weedy treatment (1.96 t ha−1). The highest grain yield was obtained from Agrodhan-12 in weed free condition (6.9 t ha-1), while the lowest value was in inbred BRRI dhan49 under weedy condition (1.73 t ha−1). Weed-free treatment and the treatments of Pretilachlor fb Penoxsolum, Pretilachlor fb hand weeding, and Pendimethalin fb hand weeding showed similar performances in reducing weed density and eventually resulted in similar and the highest grain yield. Based on these results it may conclude that Pretilachlor applied at 2 days after transplanting (DAT) fb Penoxsolum at 21 DAT is the best weed management option. But from sustainability viewpoint, Pretilachlor or Pendimethalin applied at 2 DAT along with one hand weeding at 35 DAT may be recommended for effective weed management in inbred and hybrid rice during monsoon season.J. Bangladesh Agril. Univ. 15(2): 158-166, December 2017

scholarly journals Weed control and productivity of maize (Zea mays L.) in Malete, Kwara State of Nigeria

2020 ◽  
Vol 53 (2) ◽  
pp. 63-71
Author(s):  
Emmanuel Oyamedan Imoloame
Keyword(s):  
Grain Yield ◽  
Weed Control ◽  
Control Method ◽  
Block Design ◽  
Field Trials ◽  
State University ◽  
Application Rates ◽  
Hand Weeding ◽  
Statistical Analysis Software ◽  
Range Test

AbstractThe need to determine the minimum application rates of commonly used herbicides in Malete and the Guinea savanna of Nigeria for effective weed control and higher grain yield of maize, triggered this study. Therefore, field trials were conducted at the Teaching and Research Farm of Kwara State University, Malete, to determine the weed control method that will be more effective in controlling weeds and give higher grain yield and cash returns in the production of maize. The experiment consisted of 9 treatments viz: primextra (metolachlor plus atrazine) + 2,4-D at 1.5 + 1.5 kg active ingredient (a.i.).ha−1, primextra + 2,4-D at 2.0 + 2.0 kg a.i. ha−1, primextra + 2,4-D at 2.5 + 2.5 kg ha−1, primextra + nicosulfuron at 1.5 + 0.03 kg a.i. ha−1, primextra + nicosulfuron at 2.0 + 0.05 kg a.i. ha−1, primextra + niconsulfuron at 2.5 + 0.07 kg a.i. ha−1, primextra at 1.5 kg a.i. ha−1 + one Supplementary Hoe Weeding (SHW) at 6 Weeks After Sowing (WAS), two hand weeding at 3 and 6 Weeks After Sowing (WAS) and a weedy check. These treatments were laid out in randomised complete block design (RCBD) with three replicates. Data collected were subjected to analysis of variance using Statistical Analysis Software (SAS) package, after which means were separated using Duncan’s Multiple Range Test (DMRT). Results showed that treatment combinations of primextra + one SHW at 6 WAS, two hoe weeding at 3 and 6 WAS, primextra + 2,4-D at 2.0 + 2.0 kg a.i. ha−1 and primextra + nicosulfuron at 2.0+0.05 kg a.i. ha−1 gave effective weed control, higher grain yield and cash returns. Therefore, primextra at 1.5 kg a.i. ha−1 + one SHW at 6 WAS, primextra +2,4-D at 2.0 + 2.0 kg a.i. ha−1 and primextra + nicosulfuron at 2.0 + 0.05 kg a.i. ha−1 are recommended to farmers as alternative to two hoe weeding at 3 and 6 WAS.

scholarly journals Field Performance Evaluation of Push Type Prilled Urea Applicator in Rice Cultivation

2016 ◽  
Vol 19 (2) ◽  
pp. 71-81 ◽  
Author(s):  
AKM Saiful Islam ◽  
MA Rahman ◽  
AKM Lutfor Rahman ◽  
MT Islam ◽  
MI Rahman
Keyword(s):  
Grain Yield ◽  
Block Design ◽  
Field Performance ◽  
Field Capacity ◽  
Rice Cultivation ◽  
Recommended Dose ◽  
Deep Placement ◽  
Urea Fertilizer ◽  
Ecological Zones ◽  
Prilled Urea

CORRECTION: Due to a number of formatting and layout issues, the PDF of this paper was replaced on 10th October 2016. The page numbers of this article have changed from 68-78 to 71-81.BRRI prilled urea applicator was designed and developed to facilitate deep placement of regular urea. Experiments were conducted to evaluate the performance of BRRI prilled urea applicator in the farmers’ fields at Gosaidanga in Shailkupaupazila under Jhenaidah district and at Rashidpur in Mithapukurupazila under Rangpur district during Boro 2015 season. Three treatments: hand broadcasting of urea (recommended dose) (HB), BRRI prilled urea applicator (70% of the recommended dose) (PUA) and BRRI USG applicator (70% of the recommended dose) (USGA) were compared in the experiments. The experiment was laid out in randomized complete block design (RCBD) and replicated in four farmers’ plots in each location using BRRI dhan28 as test crop both the locations. Prior to field experiment, prilled urea applicator was calibrated and urea dispensed was set to 14 gm in one revolution of drive wheel for Boro season. The field capacity of the PUA and USGA was almost similar (0.09-0.10 ha hr-1) in both the locations. Field efficiency of PUA and USGA had 64-65 and 68-69 percent, respectively. PUA and USGA saved 29-32 percent urea fertilizer compared to HB whereas labour requirement of HB (3.74-4.04 man-hr ha-1) in three splits showed similar to single application of urea by PUA (3.68-4.00 man-hr ha-1) and USGA (3.78-3.97 man-hr ha-1). Urea application cost in HB, PUA and USGA was Tk 4,624, 3,216-3,424 and 3,305-3,483 per hectare in both the locations. Prilled urea application method reduced the production cost. Urea application methods showed insignificant effect on grain yield. BRRI prilled urea safely dispensed urea fertilizer in subsurface, increased the efficacy of urea fertilizer and saved urea fertilizer without sacrificing grain yield. BRRI prilled urea applicator could be a viable technology in rice cultivation. Extensive dissemination works should be undertaken in different agro-ecological zones for wide spread adoption of the applicator.Bangladesh Rice j. 2015, 19(2): 71-81

scholarly journals Weed management in kharif rice in new alluvial zone of West Bengal

2018 ◽  
Vol 10 (2) ◽  
pp. 716-722
Author(s):  
K. Ghosh ◽  
K. A. Chowdary ◽  
B. C. Patra ◽  
S. Sardar
Keyword(s):  
Grain Yield ◽  
Weed Control ◽  
Weed Management ◽  
West Bengal ◽  
Block Design ◽  
Dry Weight ◽  
Control Measures ◽  
Randomized Block Design ◽  
Chlorimuron Ethyl ◽  
Hand Weeding

A field experiment was carried out during the Kharif season of two consecutive years 2015 and 2016 at Instructional Farm, Jaguli, Bidhan Chandra Krishi Viswavidyalaya, Nadia, West Bengal with the focal objective to assess the effect of different weed control measures on yield of transplanted kharif rice, IET 4786. Experiment having 3 replications was conducted in Randomized Block Design with nine treatments, namely, T1- Pendimethalin 30% EC + Pyrazosulfuron ethyl 10 % WP @ 675 + 15 g a.i, T2- Pendimethalin 30% EC + Pyrazosulfuron ethyl 10 % WP @ 900 + 200 g a.i, T3- Pendimethalin 30% EC + Pyrazosulfuron ethyl 10 % WP @ 1125 + 25 g a.i, T4- Pendimethalin 30% EC @ 1500 g a.i, T5- Pyrazosulfuron ethyl 10 % WP @ 15 g a.i, T6- Pyrazosulfuron ethyl 10 % WP @ 20 g a.i, T7- Metsulfuron methyl 10 % + Chlorimuron ethyl 10 % WP @ 4 g a.i, T8- Hand weeding and T9- Weedy check. Significant variations were observed on the mixed weed flora as well as on performance of rice under the different herbicidal treatments.Pendimethalin 30% EC + Pyrazosulfuron ethyl 10% WP @ 1125+25 g a.i) was found to be the most effective recording the lowest weed population and weed dry weight with  the highest weed control efficiency (83.5% in 2015 and 79.8 % in 2016) and the highest number of panicles m-2 (215.1 in 2015 and 231 in 2016), number of filled grains panicle-1 (85.39 in 2015 and 115.47 in 2016) and grain yield of rice (3.60 t/ha in 2015 and 5.30 t/ha in 2016). The lowest grain yield(2.20 t/ha in 2015 and 3.40 t/ha in 2016) and the highest weed density were observed in weedy check plots.

Potential of microwave soil heating for weed management and yield improvement in rice cropping

2019 ◽  
Vol 70 (3) ◽  
pp. 211 ◽  
Author(s):  
Muhammad Jamal Khan ◽  
Graham Brodie ◽  
Dorin Gupta
Keyword(s):  
Grain Yield ◽  
Weed Control ◽  
Untreated Control ◽  
Crop Production ◽  
Oryza Sativa L ◽  
Block Design ◽  
Soil Treatment ◽  
Soil Horizon ◽  
Irrigation Water Use ◽  
Significant Difference

Herbicide-resistant weeds have prompted the development of non-chemical weed-control techniques for sustainable crop production. We examined the potential of pre-emergence microwave (MW) soil treatment to suppress weeds and enhance grain yield in rice (Oryza sativa L.) cropping in two agro-ecological zones of Australia. An experimental MW weed killer, which has four, independently controlled, 2-kW MW generators operating at 2.45 GHz, was used to treat the soil before cropping under field conditions. A once-off MW soil treatment (duration 60 s) and an untreated control were assigned in a randomised complete block design with five replicates at two study locations: Dookie (Victoria) and Jerilderie (New South Wales). Simpson’s numerical surface integral approximation estimated the applied energy density of ~500 J cm–2. This energy increased the soil’s temperature up to 70–75°C in top soil horizon (0–6 cm) as depicted by infrared thermal imaging. No statistically significant difference was detected for weed control between MW and untreated control plots at either study location. At Dookie, grain yield did not significantly increase in response to MW soil treatment, whereas at Jerilderie, grain yield was 20% higher (P < 0.05) with MW soil treatment than in control plots. At Jerilderie, the irrigation water use efficiency (t ML–1) was 21% higher in MW plots than control plots. In summary, MW exposure of 60 s appeared to be an insufficient heating duration for seedbank depletion. This suggests further treatment modification followed by rigorous testing under different soils conditions using the MW prototype.

Effect of Sunflower Residues and Herbicide on Weed Suppression, Grain Yield and Economics of Transplanted Aman Rice

2020 ◽  
Vol 23 (1) ◽  
pp. 47-58
Author(s):  
SS Tanu ◽  
P Biswas ◽  
S Ahmed ◽  
SC Samanta
Keyword(s):  
Grain Yield ◽  
Dry Matter ◽  
Block Design ◽  
Weed Suppression ◽  
Cost Ratio ◽  
Gross Margin ◽  
Weed Density ◽  
Benefit Cost Ratio ◽  
Hand Weeding ◽  
Environmentally Sound

A field experiment was conducted at Agronomy Field Laboratory, Patuakhali Science and Technology University, Dumki, Patuakhali from July 2018 to November 2018 to evaluate the effect of sunflower residues and herbicides on the yield and economic performance of transplanted Aman rice. Weed control methods tested were T1 = weedy check (Unweeded control), T2 = Weed-free check by hand weeding twice, T3 = Pendimethalin, T4 = Pretilachlor, T5 = Butachlor, T6 = Pyrazosulfuron ethyl, T7 = Bensulfuron methyl + Acetachlor, T8 = Bispyriback sodium, T9 = 2,4-D amine, T10 = MCPA, T11 = Sunflower residues, T12 = Sunflower residues + 100% Pyrazosulfuron ethyl, T13 = Sunflower residues + 75% Pyrazosulfuron ethyl, T14 = Sunflower residues + 50% Pyrazosulfuron ethyl. The experiment was laid out in a randomized complete block design with fourteen treatments replicated thrice. Weedy check registered significantly the highest total weed density (354.67 m-2) and total weed dry matter (51.81 g-2) while weed-free treatment by hand weeding twice recorded significantly the lowest total weed density (6.67 m-2) and total weed dry matter 0.49 g-2) . Weedy check produced the highest weed index (34.24%) and hand weeding produced the lowest. Among different herbicides applied alone, butachlor had the lowest total weed density (15 m-2) and total weed dry matter (6.43 g-2) after hand weeding. Hand weeding recorded the highest grain yield (5.14 t ha-1) which was statistically similar to pendimethalin, pretilachlor, butachlor, bensulfuron methyl + acetachlor and sunflower residues + 100% pyrazosulfuron ethyl. Higher grain yield was attributed to a higher number of panicle m-2, number of filled grains panicle-1 and 1000-grain weight. The highest gross margin (22955 Tk. ha-1) and benefit-cost ratio (1.32) were obtained from butachlor. Integration of sunflower residues with pyrazosulfuron ethyl produced effective weed suppression and satisfactory yield comparable to butachlor. Although the integration is less profitable than butachlor the farmers can use this technology as a feasible and environmentally sound approach in transplanted Aman rice field. Bangladesh Agron. J. 2020, 23(1): 47-58

Sign in / Sign up

Export Citation Format

Share Document