scholarly journals Effects of Mimosa (Mimosa invisa) Compost and Phosphorus on the Yield and Yield Components of Lentil (Lens culinaris L.)

1970 ◽  
Vol 9 (1-2) ◽  
pp. 63-72
Author(s):  
R Barua ◽  
MSU Bhuiya ◽  
MM Kabir ◽  
S Maniruzzaman ◽  
Z Ahmed
Keyword(s):  
Seed Yield ◽  
Interaction Effect ◽  
Yield Components ◽  
Lens Culinaris ◽  
Block Design ◽  
Phosphorus Fertilizer ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components ◽  
Two Factors ◽  
Number Of Branches

An experiment was conducted at the Agronomy Field Laboratory of Bangladesh Agricultural University, Mymensingh, during November 2008 to March 2009 to examine the effects of mimosa (Mimosa invisa) compost and phosphorus on the yield and yield components of lentil variety BARI Masur6. Two factors were: a) Mimosa invisa compost and b) phosphorus fertilizer. Mimosa invisa compost were used in four rates- 1 (M1), 5 (M2), 10 (M3) and 15 (M4) t ha-1. Five rates of phosphorus fertilizer were: ‘no’ phosphorus (P0), 25% RDP (P1), 50% RDP (P2), 75% RDP (P3) and 100% recommended dose phosphorus (TSP @ 85 kg ha-1) (P4). The experiment was laid out in a factorial randomized complete block design with three replications. Mimosa invisa compost had significant effect on the crop characters except number of branches plant-1. The highest seed yield (1435.33 kg ha-1) was observed in M2 treatment (5 t ha-1) and the lowest seed yield (1220 kg ha-1) was observed in M4 treatment (15 t ha-1). Phosphorus had a significant effect on all the plant characters. The highest seed yield (1464.17 kg ha-1) was observed in P4 treatment (100% RDP) and the lowest was observed in P0 treatment. The interaction effect of Mimosa invisa compost and phosphorus on the yield of lentil was significant. The highest seed yield was observed (1630 kg ha-1) in M2×P4 treatment and the lowest was in M3×P0 treatment (1000 kg ha-1). Keywords: Lentil; Mimosa invisa compost; phosphorus; yield; yield components DOI: http://dx.doi.org/10.3329/agric.v9i1-2.9480 The Agriculturists 2011; 9(1&2): 63-72

scholarly journals Effect of Variety and Level of Phosphorus on the Yield and Yield Components of Lentil

2013 ◽  
Vol 3 (1) ◽  
pp. 78-82 ◽  
Author(s):  
SK Datta ◽  
MAR Sarker ◽  
FMJ Uddin
Keyword(s):  
Seed Yield ◽  
Significant Influence ◽  
Interaction Effect ◽  
Yield Components ◽  
Seed Weight ◽  
Phosphorus Fertilizer ◽  
Treatment Combination ◽  
Yield Performance ◽  
Yield And Yield Components ◽  
Four Levels

The experiment was carried out to study the effect of variety and level of phosphorus fertilizer on the yield and yield components of lentil at the Agronomy Field Laboratory, Bangladesh Agricultural University, Mymensingh during October 2009 to March 2010. Three lentil varieties viz. BINA masur 2, BINA masur 3 and BARI masur 4 and four levels of phosphorus viz. 0 kg P ha-1 (P0), 15 kg P ha-1 (P15), 30 kg P ha-1 (P30) and 45 kg P ha-1 (P45) were used in this experiment. Varieties showed significant influence on the all characters except plant height. The highest seed yield (1165 kg ha-1) was observed in BARI masur 4, and the lowest seed yield (1028 kg ha-1) was found in BINA masur 3. Phosphorus fertilizer had a significant effect on all the plant characters studied except 1000 seed weight. The highest seed yield (1222kg ha-1) was observed in P45 (45 kg P ha-1) treatment and the lowest seed yield (893 kg ha-1) was found in P0 treatment. In case of interaction, effect of cultivar and phosphorus fertilizer doses had a significant effect on all the plant characters studied except seeds pod-1 and 1000-seed weight. The highest seed yield (1317 kg ha-1) was obtained in V3 X P45 treatment, and the lowest seed yield (830 kg ha-1) was observed in V2 X P0 treatment combination. Among the varieties BINA masur 2 and BARI masur 4 were superior to BINA masur 3 in respect of yield performance with 30 kg P ha-1. BARI masur 4 fertilized with 30 kg P ha-1 produced the highest seed yield. Int. J. Agril. Res. Innov. & Tech. 3 (1): 78-82, June, 2013 DOI: http://dx.doi.org/10.3329/ijarit.v3i1.16097

scholarly journals The Effect of Intercropping and Nitroxin Biofertilizer on Yield Components and Relative Yield Total of Purslane (Portulaca oleracea L.) and Dragon’s Head (Lallemantia iberica Fisch. & C.A. Mey)

2016 ◽  
Vol 8 (4) ◽  
pp. 472-476 ◽  
Author(s):  
Hossein GHAMARI ◽  
Jalil SHAFAGH KOLVANAGH ◽  
Seyyed Hossein SABAGHPOUR ◽  
Adel DABBAGH MOHAMMADI NASSAB
Keyword(s):  
Yield Components ◽  
Block Design ◽  
Relative Yield ◽  
Portulaca Oleracea ◽  
N Fertilizer ◽  
Inorganic N ◽  
Relative Yield Total ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components ◽  
Number Of Branches

 A field study was conducted in order to evaluate the effects of intercropping and biofertilizers on yield and yield components of purslane (Portulaca oleracea L.) and dragon’s head (Lallemantia iberica Fisch. and C.A. Mey). The experiment was factorial on the basis of a randomized complete block design with three replications. The first factor was an additive intercropping system including monocultured purslane, monocultured dragon’s head, intercropping of 100% purslane + 25% dragon’s head, intercropping of 100% purslane + 50% dragon’s head, intercropping of 100% purslane + 75% dragon’s head; the second factor was nutrient treatments including application of 50% inorganic N fertilizer (urea) + nitroxin, inorganic N fertilizer (urea), nitroxin and no fertilizer. Results showed that as the density of dragon’s head increased, the number of branches in purslane decreased. In purslane, the number of capsules was significantly affected by intercropping and application of biofertilizers. In both crops, the effects of treatments on yield were significant. Results clearly showed that Relative Yield Total (RYT) was always higher in intercropping than monocultured systems. The highest RYT was observed in intercropping of 100% purslane + 50% dragon’s head with the application of 50% inorganic N fertilizer (urea) + nitroxin. Therefore, combination usage of biofertilizers and inorganic N fertilizers can improve yields in purslane/dragon’s head intercropping.

scholarly journals THE EFFECT OF DIFFERENT MICROBIAL FERTILIZER DOSES ON YIELD AND YIELD COMPONENTS IN CORIANDER (Coriandrum sativum L.)

2021 ◽  
Vol 20 (4) ◽  
pp. 59-67
Author(s):  
Volkan Gül ◽  
Erdoğan Öztürk
Keyword(s):  
Seed Yield ◽  
Yield Components ◽  
Block Design ◽  
Coriandrum Sativum ◽  
Organic Fertilizers ◽  
Optimum Dose ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components ◽  
Set Up ◽  
Harmful Effects

Microbial fertilizers containing Bacillus subtilis and Bacillus megaterium isolates are one of the important organic fertilizers, which strengthen the immune system of plants against harmful effects and promote the plant growth by fixing nitrogen from the atmosphere, to obtain better quality products. This study was conducted to determine the effects of different liquid microbial fertilizer doses (0, 500, 1000, 1500, 2000, and 2500 ml 100 L–1) on the yield and yield components of the coriander (Coriandrum sativum L.) grown in Bayburt in 2018 and 2019. The experiment was set up as three replicates in randomized complete block design. The results indicated that there was a considerable variation in the yield and yield components of coriander, and the yield significantly increased as the dose of microbial fertilizer was increased. The maximum essential oil content and seed yield were recorded for the plots grown under the F1 and F3 treatment. It was found that the maximum seed yield was obtained in the F3 treatment (839.0 kg ha–1), and the seed yield decreased in the F4 (754.1 kg ha–1) and F5 (759.9 kg ha–1) treatments. Although the increase in the microbial fertilizer dose increases seed yield, using the fertilizer in optimum dose can be more profitable. Therefore, this study suggests that the fertilizer dose “F3” can improve the productivity of the coriander grown in the areas treated with microbial fertilizer.

scholarly journals The Effects of Different Planting Densities on Lentil (Lens culinaris Medic.) Yield and Yield Components in Mardin Conditions

2021 ◽  
Vol 5 (3) ◽  
pp. 560-567
Author(s):  
E. Zelal DÜZGÜN ◽  
Necat TOĞAY
Keyword(s):  
Seed Yield ◽  
Yield Components ◽  
Lens Culinaris ◽  
Plant Density ◽  
Unit Area ◽  
Block Design ◽  
Growing Season ◽  
Vocational High School ◽  
Yield And Yield Components ◽  
Biological Yield

In this study, the effects of four different sowing densities (200, 250, 300 and 350 seed m-2) on the yield and yield components for two winter lentil cultivars (Şakar and Fırat-87) in Mardin conditions. The study was laid out in a factorial randomised block design with three replicates at the fields of Mardin Artuklu University, Kızıltepe Vocational High School in 2012-2013 growing season. In the study were investigated the effect of planting densities on the plant height, first pod height, numbers of branche, numbers of pod per plant and numbers of seed per plant, numbers of seed per pod, seed yield per unit area, harvest index, biological yield and 1000 seed weight. While the highest seed yield per area was obtained from second plant density and Şakar variety with 275.23 kg da-1, the lowest seed yield per area was obtained from first plant density and Fırat-87 variety with 208.83 kg da-1.

scholarly journals Yield performance and agronomic character association in soybean genotypes

2021 ◽  
Vol 911 (1) ◽  
pp. 012023
Author(s):  
RT Hapsari ◽  
MM Adie ◽  
A Krisnawati
Keyword(s):  
Seed Size ◽  
Seed Yield ◽  
Yield Components ◽  
Block Design ◽  
Yield Component ◽  
Significant Interaction Effect ◽  
Randomized Block Design ◽  
Yield And Yield Components ◽  
Soybean Genotypes ◽  
Number Of Branches

Abstract The aim of this research was to evaluate the performance of yield and yield components of soybean genotypes, as well as the relationship pattern among characters that affect the seed yield. The research material consists of 145 F5 lines and five check cultivars, which were evaluated for their yield and yield components in Malang and Probolinggo, using a randomized block design with two replicates. The combined analysis of variance for yield and yield component showed a significant interaction effect between location and genotype for the number of branches, the number of empty pods, 100 seed weight, and seed yield. The performance of yield and yield components of soybean genotypes tested in Malang showed earlier maturity, taller plants, larger seed size, and higher seed yields when compared to research conducted in Probolinggo. In the selection for the best genotypes, ten genotypes were chosen for their large seed size criteria, while two genotypes were chosen for their relatively medium maturity (81 days) in the location of Malang. In Probolinggo, of the ten genotypes, three genotypes with medium maturity, and three genotypes with medium seed size. The selected genotypes will proceed to the stage of the advanced yield trial. The association study revealed that soybean yield has a positive correlation with plant height, number of nodes, number of branches, number of filled pods, days to flowering, and days to maturity. Those yield components could be used as selection criteria in the breeding program to obtain high-yielding soybean cultivars.

scholarly journals Effect of Transplanting Dates on Yield and Yield Components of Nerica Rice Mutants at Drought Prone Areas of Bangladesh

2019 ◽  
pp. 1-6
Author(s):  
M. I. Ali ◽  
M. A. Islam ◽  
M. M. Islam ◽  
M. S. Islam ◽  
M. A. Rouf ◽  
...  
Keyword(s):  
Grain Yield ◽  
Interaction Effect ◽  
Yield Components ◽  
Block Design ◽  
Maximum Yield ◽  
Plot Size ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components ◽  
Check Variety ◽  
Mutant Lines

To investigate the effect of various transplanting dates on yield and yield attributing characteristics of Nerica rice mutants at drought prone areas, Ishurdi and Chapai Nawabgonj during aman season. Two advanced Nerica mutant lines (N4/350/P-4(5), N10/350/P-5-4) were evaluated compared with one check variety (Binadhan-17) with three dates of transplanting (D1=July 20, D2=July 30 and D3=August 10). The experiments were laid out on randomized complete block design (RCBD) with three replications. Twenty five days old seedlings were transplanted with optimum 20 x 20 cm row to row and plant to plant distance. The unit plot size was 3 m×4 m. The recommended doses of fertilizer were applied. The effect of dates of transplanting on grain yield of D3 was the highest (5.10 t ha-1) whereas D2 produced the lowest grain yield (4.24 t ha-1). Among the mutant lines/varieties, Binadhan-17 produced the highest grain yield (4.94 t ha-1) followed by N4/350/P-4(5) (4.57 t ha-1). The interaction effect of date and variety showed that Binadhan-17 produced the maximum yield (5.56 t ha-1) at D3 followed by N4/350/P-4(5) mutant (4.92 t ha-1). The interaction effect of date and location, D3 transplanting date produced the maximum yield (5.23 t ha-1) at Ishurdi which was followed by transplanting (4.96 t ha-1) at Chapai Nawabgonj. The interaction effect of variety and location Binadhan-17 produced maximum yield (5.06 t ha-1) in Ishurdi followed by Binadhan-17 in Chapai Nawabgonj (4.82 t ha-1). The interaction effect of date, variety and location transplanting date D3, Binadhan-17 produced maximum yield (5.70 t ha-1) in Ishurdi followed by transplanting date D3, Binadhan-17 in Chapai Nawabgonj (5.43 t ha-1). The data recorded on crop duration from transplanting to maturity revealed that the advanced mutant line N4/350/P-4(5) required the least average 108 days and the Binadhan-17 required maximum average 119 days. Therefore, 10th August was found to be the best date of transplanting and Binadhan 17 showed the best performance at Ishwardi in Bangladesh.

scholarly journals Effects of Iron and Zinc Spray on Yield and Yield Components of Wheat (Triticum Aestivum L.) in Drought Stress

2013 ◽  
Vol 46 (1) ◽  
pp. 23-32 ◽  
Author(s):  
F. Monjezi ◽  
F. Vazin ◽  
M. Hassanzadehdelouei
Keyword(s):  
Drought Stress ◽  
Seed Yield ◽  
Yield Components ◽  
Block Design ◽  
Control Treatment ◽  
Yield Reduction ◽  
Irrigation Level ◽  
Seed Filling ◽  
Yield And Yield Components ◽  
Iron And Zinc

Abstract In hot and arid regions, drought stress is considered as one of the main reasons for yield reduction. To study the effect of drought stress, iron and zinc spray on the yield and yield components of wheat, an experiment was carried out during the crop seasons of 2010 and 2011 on Shahid Salemi Farm in Ahwaz as a split factorial within randomized complete block design with three replications. The main plots with irrigation factor and three levels were considered: Level A) full irrigation, Level B) stopping irrigation at pollination step, and Level C) stopping irrigation at the seed filling stage. Subsidiary plots were considered with and without iron and zinc spray. Influencing the seed filling process, in interaction with iron, wich is an important leaf's chlorophyll cation, zinc increased the seed yield. The drought stress reduced the thousand kernels weight (TKW) and the number of seeds per spike increased about 24% and 8.5% more than the one of control treatment, respectively. Using iron, as compared with control treatment, causes the increase of thousand kernels weight from 45.71 to 46.83 grams and the increase of spike from 49.51 to 51.73. Zinc spray increased seed yield and thousand kernels weight. The results obtained from the present research showed that iron and zinc spray has fairly improved the effects caused by drought stress.

scholarly journals Evaluation of Urea Super Granule as a Source of Nitrogen in Transplant Aman Rice

2014 ◽  
Vol 24 (1-2) ◽  
pp. 29-37 ◽  
Author(s):  
TA Qurashi ◽  
MA Salam ◽  
M Jannat ◽  
MG Rabbani
Keyword(s):  
Grain Yield ◽  
Yield Components ◽  
Block Design ◽  
Prilled Urea ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components ◽  
Use Efficiency ◽  
Experimental Treatments ◽  
N Management ◽  
1000 Grain Weight

An experiment was carried out at Bangladesh Agricultural University, Mymensingh to evaluate the effect of urea super granule (USG) as a source of nitrogen on the yield and yield components of transplant Aman rice cv. BRRI dhan39, BRRI dhan46 and BINA dhan7. Five levels of N (viz., 0, 60, 120 kg ha-1 as prilled urea and 60 and 120 kg ha-1 as USG) were taken as experimental treatments. The experiment was laid out in a randomized complete block design with three replications. Plant height, effective tillers hill-1, grains panicle-1 and grain yield varied significantly due to different cultivars. All the yield and yield components except 1000-grain weight were influenced significantly by the levels of nitrogen fertilizer. The highest grain yield (4.82 t ha-1) was recorded in BINA dhan7 and the lowest one (4.30 t ha-1) was recorded in BRRI dhan39. Nitrogen @ 120 kg ha-1 as USG performed the best among the treatments in respect of yield and yield components of rice. The highest grain yield (5.46t ha-1) was obtained from BINA dhan7 with 120 kg N ha-1 as USG which was statistically identical with 60 kg N ha-1 as USG. A considerable amount (31.25%) of prilled urea (PU) nitrogen could be saved by using USG. It may be concluded that USG could be used as N management to achieve better nitrogen use efficiency in reducing N loss than the PU.DOI: http://dx.doi.org/10.3329/pa.v24i1-2.19095 Progress. Agric. 24(1&2): 29 - 37, 2013

scholarly journals Evaluation of nitrogen (Urea) on Zea mays L. under Balkh province climate

2020 ◽  
Vol 3 (1) ◽  
pp. 6-9
Author(s):  
Nasratullah Habibi ◽  
Friba Sikandari
Keyword(s):  
Zea Mays ◽  
Nitrogen Fertilizer ◽  
Yield Components ◽  
Zea Mays L ◽  
Agricultural Research ◽  
Block Design ◽  
High Yield ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components ◽  
Effect On Yield

An experiment was conducted to evaluate effect of urea fertilizer on yield and yield components of Zea mays L. Using Randomized Complete Block Design (RCBD) split plots in three replications in agricultural research farm of Balkh University by 2019. Doses of urea used in this experiment were 0, 80, 160 and 240 kg ha-1 , respectively. It has been found that amount of nitrogen fertilizer (urea) had significant effect on yield of maize at p<0.05. The higher level of nitrogen caused the higher grain yield, number of kernels per ear, the number of grains per ear row, ear diameter, cob length, grain per plant and plant height. As a result 7.76 ton ha-1 was recorded as high yield while 240 kg ha-1 urea was used, and 5.12 ton ha-1 was recorded as low yield in treatment one with 0 kg ha-1 of nitrogen fertilizer. Finally, as a result using 240 kg ha-1 nitrogen fertilizer is recommended.

scholarly journals Penampilan Fenotipik Karakter Hasil Galur Harapan Padi Rawa di Lahan Pasang Surut Karang Agung, Sumatera Selatan

2016 ◽  
Vol 17 (1) ◽  
pp. 19
Author(s):  
Rini Hermanasari ◽  
NFN Supartopo ◽  
B. Kustianto
Keyword(s):  
Plant Height ◽  
Yield Components ◽  
Rice Field ◽  
Block Design ◽  
Yield Component ◽  
Yield Potential ◽  
Lower Yield ◽  
Tidal Swamp ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components

<p>Phenotypic Performance of Yield and Yield Component of Rice Promising Lines at Tidal Swamp Area in Karang Agung, South Sumatra. An experiment was conducted in Karang Agung, in April until September 2007. The experiment aimed at evaluating phenotypic performance of yield and yield components of promising lines in tidal swamp rice field. The experiment was arranged in a Randomized Complete Block Design with 16 treatments and four replications. The promising lines tested were B9858-KA-55, B9833C-KA-14, B9852E-KA-66, B5524G-SM-61-2-1, B7003D-MR-24-3-1, KAL9414F-MR-2-KN-0, KAL9418F-MR-2-KN-0, B10214FTB- 7-2-3, IR70213-9-CPA-12-UBN-2-1-3-1, IR70215-2- CPA-2-1-B-1-2. The check varieties used were IR42, Batanghari and Lembu Sawah. The results of this experiment showed that IR61242-3B-B-2 had better performance among varieties and promising lines tested, as well as giving the highest yield potential. Meanwhile, the line B10214F-TB-7-2- 3 had better performance of number of filled grain, and 1.000 grain weight. It also showed higher yield potential compared to IR42 and Batanghari. The line KAL9418F-MR-2-KN-0 had better performance of plant height, 1.000 weight grain and harvest age, but showed lower yield potential compared to those other check varieties.</p><p> </p><p><strong>Abstrak</strong></p><p>Percobaan dilaksanakan di KP Karang Agung, Sumatera Selatan pada bulan April sampai September 2007. Penelitian bertujuan untuk mendapatkan informasi tentang penampilan fenotipik karakter hasil dan komponen hasil dari galur-galur harapan padi rawa di lahan pasang surut Karang Agung. Percobaan ditata dalam rancangan acak kelompok dengan 16 perlakuan dan empat ulangan. Galur-galur yang diuji di antaranya B9858-KA-55, B9833C-KA-14, B9852E-KA-66, B5524GSM- 61-2-1, B7003D-MR-24-3-1, KAL9414F-MR-2-KN-0, KAL9418F-MR-2-KN-0, B10214F-TB-7-2-3, IR70213-9- CPA-12-UBN-2-1-3-1, dan IR70215-2-CPA-2-1-B-1-2. Varietas pembanding digunakan IR42, Batanghari, dan Lembu Sawah. Hasil penelitian menunjukkan bahwa galur IR61242- 3B-B-2 memiliki penampilan lebih baik dari varietas pembanding untuk karakter tinggi tanaman, jumlah gabah isi, bobot 1.000 butir gabah, dan potensi hasil. Galur B10214F-TB-7-2-3 memberikan penampilan lebih baik untuk karakter jumlah gabah isi, bobot 1.000 butir, dan potensi hasil lebih tinggi daripada pembanding IR42 dan Batanghari. Galur KAL9418F-MR- 2-KN-0 memiliki penampilan lebih baik untuk karakter bobot 1.000 butir, tinggi tanaman, dan umur panen, tetapi potensi hasilnya lebih rendah dari ketiga varietas pembanding.</p>

Sign in / Sign up

Export Citation Format

Share Document