scholarly journals Assessment of Technical Efficiency of Inbred HYV and Hybrid Rice Cultivation at Farm Level

2012 ◽  
Vol 37 (2) ◽  
pp. 235-250 ◽  
Author(s):  
MA Salam ◽  
MAB Siddique ◽  
J Parvin
Keyword(s):  
Technical Efficiency ◽  
Hybrid Rice ◽  
Rice Production ◽  
Cost Ratio ◽  
Technical Inefficiency ◽  
Farm Level ◽  
Land Type ◽  
Benefit Cost Ratio ◽  
Net Returns ◽  
Significant Difference

This study is very important in the present perspective of rice economy as  comparative economics of inbred HYVs and hybrid rice production was very  scanty. As such, the present study was conducted to examine the relative  productivity, profitability, and comparative technical efficiency of inbred HYVs  and hybrid rice production in some selected areas of Gazipur district. The study  was conducted in four villages in Sadar Upzila under Gazipur district, namely  Kesurita, Martarchar, Harinal, and Samantapur. A total of 80 farmers from the  four villages were interviewed consisting of 40 farmers for hybrid and 40 for  inbred HYVs rice. Data were generated by personal interview using structured  questionnaire through conducting farm level survey. The analysis revealed  that there was no significant difference between farmers’ practices and  recommended rate of hybrid seed, TSP, and MP. But the farmers used  urea and seed of inbred HYVs significantly higher than recommend  rate. Hybrid farms incurred total cost of Tk. 63377/ha and inbred farms  incurred Tk. 61195/ha, respectively. Net returns obtained from hybrid rice was  Tk. 59,056/ha whereas it was Tk. 42,818/ha for inbred HYVs rice. Average net  return of inbred rice was 38% lower compared to that of hybrid rice.  Benefit cost ratio of inbred and hybrid production was estimated to be  1.93 and 1.70, respectively. The average yield of inbred HYV was 6.03 t/ha and  by product was 4.50 t/ha, while those of hybrid were 7.76 t/ha and 5.50 t/ha,  respectively. The estimates of technical inefficiency implied that education,  farming experience, extension contact, land type, seedling age, and number of  seedlings per hill were the major determinants of inefficiency for both inbred  and hybrid rice growers. The mean technical efficiency was about 80% for  inbred and 86% for hybrid rice producers, respectively, indicating hybrid rice  growers were technically more efficient than inbred growers. Higher-level of  education and more contact with extension agents were found to contribute in  reducing technical inefficiency of both inbred and hybrid rice producers.  Although, inbred and hybrid rice producers faced some problems, but it was  more severe for hybrid DOI: http://dx.doi.org/10.3329/bjar.v37i2.11225 Bangladesh J. Agril. Res. 37(2): 235-250, June 2012  

scholarly journals Profitability and yield gap between research station and farm level of Binamoog-8

2017 ◽  
Vol 2 (4) ◽  
pp. 685-688
Author(s):  
Syful Islam ◽  
Mangal Chandra Chanda ◽  
Mohammad Rashidul Haque ◽  
Razia Sultana ◽  
Muhammad Yunus
Keyword(s):  
Cost Ratio ◽  
Research Station ◽  
Yield Gap ◽  
Farm Level ◽  
Benefit Cost Ratio ◽  
Net Returns ◽  
Field Level ◽  
Power Tiller ◽  
Benefit Cost ◽  
Labour Power

Estimating profitability and yield gap between research station and farm level of Binamoog-8 was conducted in five major Binamoog-8 growing areas of Bangladesh, namely Ishwardi, Magura, Natore, Jessore and Meherpur. The average cost of production in farm level of Binamoog-8 is Tk. 47373.55ha-1 and higher in Ishwardi (Tk. 53454.92 ha-1) followed by Meherpur, Magura, Natore and Jessore of Tk. 45160.28, Tk. 44300.14, Tk. 45232.95 and Tk. 48719.47 per hectare, respectively .The major shares of total cost were human labour, power tiller and irrigation. The net returns were Tk. 41160, Tk. 42902.30, Tk. 53603.18, Tk. 47494.60 and Tk. 40437.16 per hectare followed in Ishwardi, Meherpur, Magura, Natore and Jessore, respectively. The highest net return (Tk. 53603.18 ha-1) comes from Magura district for Binamoog-8.The undiscounted average benefit cost ratio over full cost basis were 1.77, 1.95, 2.21, 2.05 and 1.83 for Binamoog-8 in field level for Ishwardi, Meherpur, Magura, Natore and Jessore, respectively. The average yield gap of Binamoog-8 in farm level and research station was 129.05 kg per hectare. The yield gap between research station and farm level were 102.97 kg, 185.50 kg, 45.85 kg, 128.50 kg and 182.45 kg per hectare for Binamoog-8 in Ishwardi, Meherpur, Magura, Natore and Jessore, respectively. The highest yield gap between research station and field level was in Meherpur (185.50 kg per hectare) and lowest in Magura (45.85 kg per hectare). Farmers were facing various constraints in Binamoog-8 cultivation. Different strategies, such as lack of quality seed and fertilizer in appropriate time, lack of credit facilities, rainfall during germination period, insect infestation and pathogen infection, pod maturity in different times have been discussed as strategies to minimize yield gaps.Asian J. Med. Biol. Res. December 2016, 2(4): 685-688

A generalized stochastic production frontier analysis of technical efficiency of rice farming

2016 ◽  
Vol 9 (2) ◽  
pp. 114-128 ◽  
Author(s):  
Aditi Bhattacharyya ◽  
Raju Mandal
Keyword(s):  
Technical Efficiency ◽  
Rice Production ◽  
Farm Households ◽  
Rice Farming ◽  
Stochastic Production Frontier ◽  
Production Frontier ◽  
Technical Inefficiency ◽  
Content Type ◽  
Farm Level ◽  
Stochastic Production

Purpose This paper aims to analyze farm-level technical inefficiency of rice farming in Assam, India, using a multiple-output generalized stochastic frontier framework. Design/methodology/approach Primary data for this study were collected in 2009-2010 from 310 farm-households in four non-contiguous districts of Dhubri, Morigaon, Dibrugarh and Cachar that are located in different agro-climatic regions of Assam. Based on a Cobb–Douglas production function for multiple rice varieties, the paper simultaneously estimates the generalized stochastic production frontier and examines effects of exogenous factors on farm-level technical inefficiency. Findings Results of this study show that the average technical inefficiency of farms is 8.5 per cent in the sample. Further, inefficiency is lower in the frequently flood prone areas, and availability of government support helps reduce such inefficiency as well. However, technical efficiency is higher for the Muslim farm-households, and it decreases with greater land fragmentation. The study also finds that the use of primitive technology like bullock reduces technical efficiency of rice farming. Originality/value This paper is based on a novel data set that has specially been collected to examine productivity and efficiency of rice cultivation in the flood plains of Assam that has not been studied before. Further, to the best of the authors’ knowledge, this paper is the first one to model rice production as a multiple-output stochastic production frontier and analyze technical efficiency of rice production accordingly.

scholarly journals Adoption of mungbean technologies and technical efficiency of mungbean (Vigna radiata) farmers in selected areas of Bangladesh

2014 ◽  
Vol 39 (1) ◽  
pp. 113-125 ◽  
Author(s):  
MA Haque ◽  
MA Monayem Miah ◽  
AM Ali ◽  
AN Luna
Keyword(s):  
Technical Efficiency ◽  
Insect Pest ◽  
Cost Ratio ◽  
Sowing Time ◽  
Farm Level ◽  
Benefit Cost Ratio ◽  
Medium Level ◽  
Cash Cost ◽  
Good Quality Seed ◽  
Benefit Cost

Mungbean is one of the most important pulse crops in Bangladesh. The demand of mungbean is very high due to its good taste. To date, different national institutes released 14 improve mungbean varieties with complete package of technologies and disseminated them to the farmers. But, the farm level adoption of mungbean varieties, their economics, and farmer’s efficiencies are not well known to the researchers and policy planners. Therefore, the study assessed the farm level adoption of mungbean technologies, technical efficiency of mungbean growers, and find out constraints to its higher production. Data were collected from 283 randomly selected mungbean farmers from Jessore, Kushtia, and Barisal districts during March-April 2009. The highly adopted mungbean varieties were BARI Mung-3, 4 and 5. Technologies, such as ploughing, weeding, and seed rate occupied higher level of adoption. Sowing time and insect-pest control were medium level and irrigation was lower level adoption. In case of chemical fertilizer, urea secured higher level of adoption followed by TSP and MoP. The yield and net return of mungbean was 1196 kg and Tk. 15678 per hectare, respectively. The benefit cost ratio was 1.69 and 2.47 on full cost and cash cost basis, respectively. About 67% farmers achieved more than 90% technical efficiency level. Twenty eight percent farmers’ technical efficiency level, between 81-90% and the rest 5% farmers’ technical efficiency level was less than 80%. Diseases and pest infestation, lack of good quality seed, lack of knowledge about improved technologies were the major constraints to mungbean cultivation. Government should provide hand-on training and distribute quality seed to the farmers for increasing the area of mungbean cultivation. DOI: http://dx.doi.org/10.3329/bjar.v39i1.20149 Bangladesh J. Agril. Res. 39(1): 113-125, March 2014

EFFECT OF DIFFERENT DOSES OF BORON ON GROWTH AND YIELD OF OFF-SEASON CAULIFLOWER (BRASSICA OLERACEA VAR. BOTRYTIS) IN ARGHAKHANCHI, NEPAL

2020 ◽  
Vol 1 (1) ◽  
pp. 12-17
Author(s):  
Srijana Pandey ◽  
Sapana Parajuli ◽  
Biplov Oli ◽  
Surya Dhungana
Keyword(s):  
Brassica Oleracea ◽  
Growth Parameters ◽  
Block Design ◽  
Leaf Length ◽  
Growth And Yield ◽  
Cost Ratio ◽  
Benefit Cost Ratio ◽  
Net Returns ◽  
Benefit Cost ◽  
Different Doses

The research was conducted at Beltari Sandhikharka-10, Arghakhanchi district to study about the effect of various doses of boron on growth and yield attributing characters of cauliflower (Brassica oleracea var. botrytis) during off-season from February to June in 2020. Five treatments; B0 (control/no application), B1: 2kg/ha, B2: 4kg/ha, B3: 6kg/ha, B4: 8kg/ha which are the different doses of boron application were laid out in Randomized Complete Block Design (RCBD) with 4 replications. The growth parameters like plant height, number of leaves per plant leaf length and leaf breadth of largest leaf were recorded multiple times with 15 days interval. Days to curd initiation and Days from curd initiation to harvest were recorded by regular field observation. The yield parameters; curd weight with leaves, Marketable curd weight, average curd yield, incidence of hollowing were recorded during harvest. The economics from application of boron doses in cauliflower production was obtained in terms of cost of cultivation, gross returns, net returns, and benefit cost ratio. The result showed that the growth and yield attributing characters of cauliflower were significantly affected by application of boron in which the value of these parameters was found significantly higher in B1 followed by other treatments. The average curd yield of cauliflower in B1 was found to be 12.39 mt/ha which was 48.92% higher than that of B0 with curd yield 8.32 mt/ha. Similarly, the net return was found significantly the highest in B1 and the lowest in B0. The result showed that application of boron in the range of 2-4 kg/ha is preferred to control and higher doses in respect of both productivity and economics.

Nitrogen Requirement of Potato for Eastern Indo-Gangatic Plain of India

2020 ◽  
Vol 7 (03) ◽  
Author(s):  
S. K. YADAV ◽  
R. K. SINGH ◽  
V. K. DUA ◽  
S SINGH ◽  
SARALA YADAV ◽  
...  
Keyword(s):  
Tuber Yield ◽  
Potato Crop ◽  
Block Design ◽  
Nitrogen Level ◽  
Cost Ratio ◽  
Research Station ◽  
Net Benefit ◽  
Marketable Tuber ◽  
Benefit Cost Ratio ◽  
Significant Difference

A field experiment was carried out during 2015-16 and 2016-17 at ICAR-Central Potato Research Station, Patna, Bihar, in randomized block design with four replications with objective to quantity the optimum requirement of nitrogen to potato crop. Significantly the highest plant height was recorded with nitrogen level of 300 kg/ha. Distributions of the smallest size of tuber yield of potato were decreasing with increasing the level of nitrogen. There was about 26.0% more yield of the smallest size tuber of potato was recorded with zero nitrogen as compare to the highest level of nitrogen i.e. 300 kg/ha. Increasing the nitrogen over the level of 150 to 225 kg per hectare, increasing the yield of tuber gradually slower rate than nitrogen level from 0 to 150 kg/ha. Total and marketable tuber yield of potato were increasing significantly with increasing level of nitrogen up to 150 kg/ha. There was no significant difference in marketable tuber yield was found for nitrogen level between 150 and 225 kg/ha. Highest (1.66) net benefit cost ratio was also recorded with level of nitrogen @ 150 kg/ha in potato. Hence, application of nitrogen @ 150 kg/ha was found statistically and economically more beneficial for potato cultivation in Eastern Indo-Gangatic plain of India.

scholarly journals Impact of Different Water Management Regimes on the Growth, Productivity, and Resource Use Efficiency of Dry Direct Seeded Rice in Central Punjab-Pakistan

Agronomy ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1151
Author(s):  
Sadam Hussain ◽  
Saddam Hussain ◽  
Zubair Aslam ◽  
Muhammad Rafiq ◽  
Adeel Abbas ◽  
...  
Keyword(s):  
Grain Yield ◽  
Hybrid Rice ◽  
Water Productivity ◽  
Dry Weight ◽  
Cost Ratio ◽  
Yield Attributes ◽  
Benefit Cost Ratio ◽  
Direct Seeded ◽  
Total Dry Weight ◽  
Benefit Cost

Dry direct-seeded rice has been shown to save irrigation water and labor. Nonetheless, irrigation management in dry direct-seeded rice has received very little attention. Here, we examined the potential of different irrigation regimes: aerobic rice (AR), alternate wetting and drying (AWD) and continuous flooding (CF) in dry direct-seeded rice cultivation on two rice cultivars (Pride-1 (hybrid indica) and NB-1 (inbred indica)). Growth, yield attributes, grain yield, total water input, water productivity and benefit cost ratio were measured. Our results showed that AR saved 11.22 and 28.40%, and 5.72 and 32.98% water compared with AWD and CF during 2018 and 2020, respectively. There was a significant difference in grain yield among treatments and cultivars. AWD and CF produced statistically same total dry weight and grain yield, while AR reduced the total dry weight by 31.34% and 38.04% and grain yield by 34.82% and 38.16% in comparison to AWD and CF, respectively, across the years. Except for 1000-grain weight and harvest index in AWD and CF, further differences in total dry weight and grain yield among irrigation treatments were primarily correlated with variations in yield attributes. Among the cultivars, hybrid rice performed better than inbred rice. Over the two-year period, hybrid rice increased total dry weight, grain yield, and water productivity by 9.28%, 13.05%, and 14.28%, respectively, as compared to inbred rice. Regarding water productivity (WP), the maximum percentage (40.90 and 26.53%) was recorded for AWD compared to AR and CF. Among cultivars, more water productivity (14.28%) was calculated for hybrid rice than inbred one. Chlorophyll and carotenoid contents, leaf area index and crop growth rate contributed to higher grain yield of hybrid rice under AWD and CF. In contrast to WP, the maximum benefit cost ratio was estimated to be higher for CF than that of AR and AWD. For the cultivars, the maximum value (2.26 in 2018 and 2.32 in 2020) was calculated for hybrid rice compared with the inbred one. In conclusion, these results suggests that AWD with maximum WP and CF with maximum BCR could be more efficient approaches than AR. Under CF, hybrid rice cultivars with higher yield and yield-related attributes, WP and BCR performed better.

Weed Management through Imidazolinones in Pigeon Pea (Cajanus cajan L.)

2021 ◽  
Author(s):  
Amit Kumar ◽  
A.K. Dhaka ◽  
Satish Kumar ◽  
Akshay Kumar Vats ◽  
Harender .
Keyword(s):  
Nutrient Uptake ◽  
Weed Control ◽  
Weed Management ◽  
Promising Result ◽  
Nutrient Content ◽  
Pigeon Pea ◽  
Cost Ratio ◽  
Benefit Cost Ratio ◽  
Pulse Crops ◽  
Net Returns

Background: Pulse crops are commonly known as poor man’s meat. Pigeon pea is second most important pulse crops of India after chickpea. Weeds are amongst prime biotic factors limiting pigeon pea yield and can cause seed yield losses up to 80 per cent. Promising result of weed control by pendimethalin was documented in pigeon pea. Also Imazethapyr is applied as pre and post emergence to control grasses and broad leaved weeds in other pulse crops but limited research was undertaken in pigeon pea. Therefore, current experiment focused to compare the effect of imidazolinones alone and in combination in pigeon pea. Methods: To control weeds in pigeon pea, pre and post-emergence of imidazolinones alone and in combination with pendimethalin was applied. Nutrient content, nutrient uptake, productivity and economics of pigeon pea were worked out.Conclusion: Among herbicidal treatments, the highest nutrient content, nutrient uptake, productivity, net returns and benefit cost ratio in pigeon pea were observed in the pre-emergence application of pendimethalin + imazethapyr @ 1000 + 75 g ha-1. Therefore, this treatment may be an effective and profitable alternative to the existing manual and costlier recommendation (two hoeing at 25 and 45 DAS) of weed control in pigeon pea in Haryana locality.

scholarly journals Comparative Analysis of Rice Performance and Profitability with the System of Rice Intensification (SRI) and Traditional Practices (TP) in Ziguinchor District, Senegal

2021 ◽  
Vol 2 (1) ◽  
pp. 22-36
Author(s):  
Pierre C. C. DIEDHIOU ◽  
Antoine SAMBOU ◽  
Ousmane NDIAYE, NGor NDOUR ◽  
Seydou K. DIEDHIOU
Keyword(s):  
Comparative Analysis ◽  
Rice Production ◽  
System Of Rice Intensification ◽  
Cost Ratio ◽  
Traditional Practices ◽  
Traditional System ◽  
Benefit Cost Ratio ◽  
Yield Parameters ◽  
Rice Intensification ◽  
Benefit Cost

The "System of Rice Intensification"(SRI) represents a sustainable alternative to improve household yields and incomes. This study aimed to evaluate the yields and the profitability of the SRI and the Traditional Practices (TP) in Ziguinchor district, Senegal. A directed sampling based on criteria for selecting the system used and the cultivated varieties common to both systems was applied to collect the yield parameters and yields of paddy rice. Thus, 18 producers in the Badiate, Essyl, and Fanda sites were selected, nine per system and four 1 m2 yield squares were installed in each selected producer plot. A total of 72 yield squares, 36 per system, were installed, and an individual questionnaire was randomly administered to 55 producers using at least one of the systems to collect data on rice production and costs. The yield parameters including the number of fertile tillers per m2, the number of spikes, the weight of the 1000 grains are significantly higher (p<0.05) in the SRI including yield compared to the traditional system. Transplanting density and plant duration are higher in TP (26±5.6 plants/m2 and 26 days) than in SRI (16±0.4 plants/m2 and 16 days). The lower the transplanting density, the higher the yield parameters and the yield. The economic profitability, determined based on the benefit/cost ratio, is higher in SRI (1.5) than in TP (1.2). The SRI required a lot of technicality in its implementation and generated more cost of production. However, SRI was more productive and economically more profitable than the traditional system.

scholarly journals Import and export parity price analyses of selected vegetables and spices in Bangladesh

2017 ◽  
Vol 42 (2) ◽  
pp. 321-341
Author(s):  
MA Rashid ◽  
MA Monayem Miah ◽  
Tanvir MB Hossain
Keyword(s):  
Comparative Advantage ◽  
Import Substitution ◽  
Cost Ratio ◽  
Net Return ◽  
Benefit Cost Ratio ◽  
Net Returns ◽  
Resource Cost ◽  
Parity Price ◽  
Benefit Cost ◽  
Domestic Resource

The study was undertaken to find out the export potentialities of selected vegetables and import substitution of selected spices in Bangladesh. Seven hundred twenty vegetables and 320 spices growers, 25 suppliers, and 25 exporters were randomly selected for the study.Net margin analysis was done on both variable and total cost basis. Domestic resource cost (DRC) analysis was also done for estimating comparative advantage of the selected vegetables and spices. The study revealed that net returns were positive for all vegetables and spices producers. However, the highest net return was estimated for brinjal producers (Tk. 273799/ha) followed by bittergourd producers (Tk152145/ha). In the case of spices, the highest net return was received by ginger producers (Tk. 231399/ha) followed by onion producers (Tk. 122308/ha).Comparatively lower net returns were found for okra (Tk51830/ha) and garlic producers (Tk 99352/ha). Vegetables exporters received the highest net margin (Tk32852/ ton) from UK market which was higher than the Middle East market (Tk22869/ton).The highest benefit cost ratio (BCR) was calculated for brinjal (1.9) followed by ash gourd (1.8). For spices, BCR were 2.1and 1.8 for ginger and garlic respectively. Bangladesh had comparative advantage for producing all selected vegetables as the estimates of domestic resource cost (DRC) were less than one. The value of DRC for all selected spices were less than unity implied that the production of these spices would be highly efficient for import substitution. Therefore, the study have been undertaken to find out this issues.Bangladesh J. Agril. Res. 42(2): 321-341, June 2017

EFFICIENT TILLAGE AND NUTRIENT PRACTICES FOR SUSTAINABLE PEARL MILLET PRODUCTIVITY IN DIFFERENT SOIL AND AGRO-CLIMATIC CONDITIONS

2011 ◽  
Vol 48 (1) ◽  
pp. 1-20 ◽  
Author(s):  
G. R. MARUTHI SANKAR ◽  
P. K. MISHRA ◽  
K. L. SHARMA ◽  
S. P. SINGH ◽  
A. K. NEMA ◽  
...  
Keyword(s):  
Grain Yield ◽  
Pearl Millet ◽  
Monthly Rainfall ◽  
Organic N ◽  
Cost Ratio ◽  
Inorganic N ◽  
Grain Yields ◽  
Benefit Cost Ratio ◽  
Net Returns ◽  
Benefit Cost

SUMMARYLong-term field experiments were conducted at Agra, Solapur and Hisar from 2000 to 2008 to identify efficient tillage and nutrient management practices and to develop predictive models that would describe the relationship between crop yields and monthly rainfall for rainfed pearl millet grown on arid and semi-arid Inceptisol, Vertisol and Aridisol soils. Nine treatments comprising a factorial combination of three tillage practices, viz., conventional tillage (CT), low tillage + interculture (LT1) and low tillage + herbicide (LT2) and three fertilizer treatments viz., 100% N from an organic source (F1), 50% organic N + 50% inorganic N (F2) and 100% inorganic N (F3) were tested in a split-plot design at the three locations. Studies revealed that tillage and fertilizer treatments, and their interactions, significantly influenced pearl millet grain yields at the three locations. Prediction models describing the relation between grain yield and monthly rainfall indicated that rainfall occurring in June, July and August at Agra; June and July at Solapur; and June and August at Hisar significantly influenced pearl millet grain yield attained by different treatments. The R2 values of the model ranged from 0.64 to 0.81 at Agra; 0.63 to 0.92 at Solapur, and 0.75 to 0.89 at Hisar. When averaged over all the treatment combinations, mean pearl millet grain yields varied from 1590 to 1744 kg ha−1 at Agra; 1424 to 1786 kg ha−1 at Solapur; and 1675 to 1766 kg ha−1 at Hisar while their corresponding sustainability yield indice (SYI) varied from 35.4 to 42.2%, 19.9 to 45.6% and 64.1 to 68.3%, respectively. At Agra (Inceptisol), CTF3 resulted in significantly higher mean net returns (Rs 11 439 ha−1), benefit-cost ratio (2.33), rainwater use efficiency (RWUE) (3.52 kg ha−1 mm−1) and the second best SYI (39.9%). At Solapur (Vertisol), the LT1F3 resulted in significantly higher net returns (Rs 12 818 ha−1), benefit-cost ratio (3.52), RWUE (3.89 kg ha−1 mm−1) and the fourth best SYI (42.6%). At Hisar (Aridisol), the LT1F3 treatment gave higher net returns (Rs 3866 ha−1), benefit-cost ratio (1.26), RWUE (5.05 kg ha−1 mm−1) and the fourth best SYI (67.8%). These treatment combinations can be recommended for their respective locations to achieve maximum RWUE, productivity and profitability.

Sign in / Sign up

Export Citation Format

Share Document