scholarly journals Effects of copper and vermicompost on growth and yield of cowpea (Vigna unguiculata L.) Walp and nutrient accumulation in its fruits

Author(s):  
AT Sharif ◽  
AHMZ Ali ◽  
MK Rahman

The effects of copper (Cu) and vermicompost (VC) on growth and yield of cowpea (Vigna unguiculata L.) Walp and nutrient accumulation in its fruits was examined. Eight treatments of Cu and VC were used. The highest plant height (226.67 cm), leaf number per plant (86.33), leaf area (174.12 cm2/plant), dry weight (13.98 g/plant), fruit length (52.4 cm), fruit number per plant (6), and fruit yield (5.65 g/plant) were recorded in Cu0.5 kg/ha + VC5 ton/ha treatment at harvest. The results of growth and yield of cowpea varied significantly (p≤ 0.05) and increased with time. The total nutrient concentrations in the fruits were measured and varied significantly (p≤ 0.05). The highest concentration of total P (0.79%), K (4.14%), S (0.42%), Cu (27 mg/kg), Fe (640 mg/kg) and Mn (59 mg/kg) in the fruits were observed in Cu0.5 kg/ha + VC5 ton/ha treatment and total N (4.29%) and Zn (88 mg/kg) were found in Cu1.5 kg/ha + VC5 ton/ha treatment. The overall best growth, yield and nutrient accumulation in the fruits of cowpea were achieved in Cu0.5 kg/ha + VC5 treatment. J. Biodivers. Conserv. Bioresour. Manag. 2019, 5(2): 13-18

Author(s):  
KS Nawrin ◽  
MJ Uddin ◽  
AHMZ Ali ◽  
MK Rahman

The effects of boron (B) and vermicompost (VC) on growth and yield of Chilli (Capsicum annum L.) and nutrient accumulation in its fruits was examined. The highest plant height (22 cm), leaf number per plant (73), leaf area (502.53 cm2/plant), dry weight (22.27g/plant), fruit length (8.97cm), fruit number per plant (6), fruit yield (11.76 g/plant) were recorded in B0.5 kg/ha + VC5 ton/ha at harvest. The results of growth and yield of Chilli varied significantly (p<0.05) and increased with time. The total nutrient concentrations in the fruits were measured and varied significantly (p<0.05). The highest concentration of total P (0.028 %), K (2.50%), S (0.20 %), Cu (8.0 mg/kg), Fe (410 mg/kg) and Mn (0.80 mg/kg) in the fruit were observed in B0.5 kg/ha +VC5 ton/ha treatment and total N (0.41 %) and Zn (3.50 mg/kg) were found in B1.5 kg/ha + VC5 ton/ha treatment. The overall best growth, yield and nutrient accumulation in the fruits of Chilli was achieved in B0.5 kg/ha + VC5 t/ha treatment. J. Biodivers. Conserv. Bioresour. Manag. 2020, 6(1): 31-36


1970 ◽  
Vol 34 (1) ◽  
pp. 67-73
Author(s):  
M SH Islam ◽  
MSU Bhuiya ◽  
AR Gomosta ◽  
AR Sarkar ◽  
MM Hussain

Pot experiments were conducted during T. aman 2001 and 2002 (wet season) at Bangladesh Rice Research Institute (BRRI) in net house. Hybrid variety Sonarbangla-1 and inbred modern variety BRRI dhan-31 were used in both the seasons and BRRI hybrid dhan-l was used in 2002. The main objective of the experiments was to compare the growth and yield behaviour of hybrid and inbred rice varieties under controlled condition. In 2001, BRRI dhan-3l had about 10-15% higher plant height, very similar tillers/plant, 15-25% higher leaf area at all days after transplanting (DAT) compared to Sonarbangla-1. Sonarbangla- 1 had about 40% higher dry matter production at 25 DAT but had very similar dry matter production at 50 and 75 DAT, 4-11% higher rooting depth at all DATs, about 22% higher root dry weight at 25 DAT, but 5-10% lower root dry weight at 50 and 75 DAT compared to BRRI dhan-31. The photosynthetic rate was higher (20 μ mol m-2/sec-1) in BRRI dhan-3l at 35 DAT (maximum tillering stage) but at 65 DAT, Sonarbangla-l had higher photosynthetic rate of 19.5 μ mol m-2 sec-1. BRRI dhan-3l had higher panicles/plant than Sonarbangla-1, but Sonarbangla-1 had higher number of grains/panicle, 1000-grain weight and grain yield than BRRI dhan-31. In 2002, BRRI dhan-31 had the highest plant height at 25 DAT, but at 75 DAT, BRRI hybrid dhan-l had the highest plant height. Sonarbangla-1 had the largest leaf area at 25 and 50 DAT followed by BRRI dhan-31, but at 75 DAT, BRRI dhan-31 had the largest leaf area. The highest shoot dry matter was observed in BRRI dhan-31 followed by Sonarbangla-1 at all DATs. Sonarbangla-1 had the highest rooting depth and root dry weight at all DATs. BRRI dhan-31 gave the highest number of panicles/plant followed by Sonarbangla-I, BRRI hybrid dhan-l had the highest grains/panicle followed by BRRI dhan-31 and Sonarbangla-I had the highest 1000-grain weight followed by BRRI dhan-31. The highest amount of grains/plant (34.6 g) was obtained from BRRI dhan-31. Key Words: Shoot dry matter; root dry weight; leaf area; photosynthesis; grain yield. DOI: 10.3329/bjar.v34i1.5755Bangladesh J. Agril. Res. 34(1) : 67-73, March 2009


Author(s):  
A. A. J. Mofunanya ◽  
E. A. Effa ◽  
I. R. Udosen

Aim: Amelioration effect of soil amendment on growth and yield of Vigna unguiculata L. grown in acidic and alkaline soils. Study Design: The study was conducted in a randomized complete block design with five replicates. Place and Duration of Study: Department of Botany, University of Calabar, Nigeria, between May and September, 2017. Methodology: Composite soils from two locations Akamkpa (pH 4.0) and Odukpani (pH 9.0) were collected, mixed thoroughly with organic manure (OM) and agricultural lime (AL) singly and in combination, allowed to stay three weeks for proper blending before V. unguiculata seeds were sown. On seedlings germination, amelioration effect of soil amendment on growth and yield of cowpea grown in acidic and alkaline soils was studied at different periods of growth. Results: Results revealed significant (P=0.05) increase in leaf area, plant height, number of leaves, leaf fresh and leaf dry weight, relative growth rate, net assimilation rate and leaf area ratio of V. unguiculata grown in acidic and alkaline soils treated with OM and AL. Pod length, number of pods plant-1, number of seeds pod-1, number of seeds plant-1, weight of 100 seeds increased significantly. Organic manure used singly and in combination was more effective in ameliorating soil pH effect than AL. Vigna unguiculata performed better in treated and untreated alkaline than in acidic soils. Least plant height for V. unguiculata grown in untreated alkaline soil at 12 weeks after sowing WAS was 60.22±0.16a cm and highest 119.63E2±.35g cm for plants grown in soil treated with AL1+OM1. Least number of seeds plant-1 for plants grown in untreated acidic soil at 12 WAS was 90.60±0.02a and the highest 139.18E2±0.02e for plants grown in soil treated with AL1+OM1. Conclusion: An improvement in growth and seed yield of V. unguiculata grown in acidic and alkaline soils is feasible through the use of organic manure and agricultural lime.


2018 ◽  
Vol 5 (4) ◽  
pp. 34
Author(s):  
Paul B Timotiwu ◽  
Agustiansyah . ◽  
Ermawati . ◽  
Suci Amalia

This study was aimed to determine the effect of the increasing silica and boron concentration and their interaction on plant growth and soybean yield. This research was conducted from April-September 2017 in the integrated field of the experiment at the University Lampung. The treatments were 0 and 5 ppm Boron (B) fertilizer and Silica (Si) concentrations in 6 levels (0, 25, 50, 75, and 100 ppm). The difference between the means of B were calculated by using Orthogonal Contrast and response of Si was used Polynomial at a 0.05. The results showed that application of 5 ppm of B foliarly produced higher of soybean growth and production than without B treatment through variables of the dry weight and grain weight. Application of up to 125 ppm of Si foliarly was improved of soybean growth and production through variables of plant height, number of leaf, leaf area, dry weight and number of productive branch, number of pods, filled pod, and grain weight, but it didn’t affect the percentage of empty pods. The response of soybean growth and production to the increasing Si didn’t depend on the foliar B which was showed in all variables.


2018 ◽  
Vol 14 (1) ◽  
pp. 41-46
Author(s):  
Rismawaty Saban ◽  
Henry Kesaulya ◽  
Jeanne I Nendissa

This study aimed to determine the effect of different biostimulant applications (solid and liquid) on the growth and yield of mustard plants. This study used a single factor Randomized Block Design (RBD), consisting of solid or liquid biostimulant treatment, each has twelve levels, i.e. K0 = without biostimulant, K1 = NPK 1 g per plant, solid and liquid biostimulant each consisting of 10 treatments = B1, B2, B3, B4, B5, B6, B7, B8, B9, B10. Solid biostimulant was given at 2.5 g per plant and liquid biostimulant at 10 ml per plant. The results showed that liquid biostimulant gave a significant effect on plant height, crop fresh weight, and crop dry weight; whereas solid biostimulant gave a very significant effect on entire weight, i.e. fresh weight of mustard plant, fresh root weight, and crop dry weight. The best treatment for liquid biostimulant was B1 treatment; whereas for the solid biostimulant was B7 treatment. Keywords: biostimulant, mustard, growth, yield   ABSTRAK Penelitian ini bertujuan untuk mengetahui pengaruh aplikasi biostimulan yang berbeda (biostimulan padat dan cair) terhadap pertumbuhan dan produksi tanaman sawi. Penelitian ini menggunakan rancangan acak kelompok faktor tunggal yang terdiri dari perlakuan Biostimulan (padat dan cair) yang masing-masing perlakuan terdapat dua belas taraf (P): K0 = tanpa biostimulan, K1 = NPK 1 g/tan, Biostimulan padat dan cair masing-masing terdiri dari 10 perlakuan = B1, B2, B3, B4, B5, B6, B7, B8, B9, B10. Biostimulan padat 2.5 g/tan dan biostimulan cair 10 ml/tan. Hasil penelitian menunjukkan bahwa biostimulan cair memberikan pengaruh yang nyata terhadap tinggi tanaman sawi, berat segar tanaman, dan berat kering tanaman, sedangkan biostimulan padat memberikan pengaruh yang sangat nyata terhadap semua bobot berat tanaman sawi yaitu berat segar tanaman, berat segar akar, dan berat kering tanaman. Perlakuan terbaik untuk biostimulan cair adalah perlakuan B1, sedangkan untuk biostimulan padat perlakuan yang terbaik adalah perlakuan B7. Kata kunci: biostimulan, sawi, pertumbuhan, produksi


Sensors ◽  
2020 ◽  
Vol 20 (18) ◽  
pp. 5270
Author(s):  
Yuta Ohashi ◽  
Yasuhiro Ishigami ◽  
Eiji Goto

Monitoring the growth of fruit vegetables is essential for the automation of cultivation management, and harvest. The objective of this study is to demonstrate that the current sensor technology can monitor the growth and yield of fruit vegetables such as tomato, cucumber, and paprika. We estimated leaf area, leaf area index (LAI), and plant height using coordinates of polygon vertices from plant and canopy surface models constructed using a three-dimensional (3D) scanner. A significant correlation was observed between the measured and estimated leaf area, LAI, and plant height (R2 > 0.8, except for tomato LAI). The canopy structure of each fruit vegetable was predicted by integrating the estimated leaf area at each height of the canopy surface models. A linear relationship was observed between the measured total leaf area and the total dry weight of each fruit vegetable; thus, the dry weight of the plant can be predicted using the estimated leaf area. The fruit weights of tomato and paprika were estimated using the fruit solid model constructed by the fruit point cloud data extracted using the RGB value. A significant correlation was observed between the measured and estimated fruit weights (tomato: R2 = 0.739, paprika: R2 = 0.888). Therefore, it was possible to estimate the growth parameters (leaf area, plant height, canopy structure, and yield) of different fruit vegetables non-destructively using a 3D scanner.


2019 ◽  
Vol 4 (1) ◽  
pp. 213-226
Author(s):  
Godson Emeka Nwofia ◽  
Queen Udodirim Okwu ◽  
Emmanuel Ukaobasi Mbah

AbstractThe objectives of the study were to assess the inter-relationship between growth, yield, nutritional and anti-nutritional responses of thirteen tannia (Xanthosoma sagittifolium L.) accessions to planting date (May, June and July) in the humid tropics. Tannia corms and leaves are veritable sources of dietary fibre and starch, also essential minerals and vitamins; hence its value for security and as a cash crop for people in the humid tropics. A two-year 13-genotype × 3 planting date factorial arranged rain-fed field experiment in randomized complete block design with three replications was carried out during the 2014 and 2015 cropping seasons at Michael Okpara University of Agriculture, Umudike, Nigeria. The results indicated that planting date and accession influenced growth and yield of tannia, an indication of differential responses of the thirteen accessions to the planting dates (May, June and July). The results suggest that May is the most appropriate planting date; accessions planted during this month had the highest yields. The interaction between planting date and tannia accession was significant for some traits (number of leaves per plant and cormel weight per plant) in both years and significant for plant height, pseudo-circumference and corm weight (2014); leaf area and tannia yield (2015). The correlation analysis showed good selection characters in plant height, pseudo-stem circumference, leaf area, number of leaves per plant, corm weight, corm circumference, cormel weight and cormel circumference for high yielding varieties, while nutritional analysis (crude protein, carbohydrate, phosphorus, potassium, calcium, tannin and oxalate) exhibited lower concentrations in processed corms relative to unprocessed. The corm yield of the tannia accessions ranged from 1.49 to 13.48 Mt.ha−1 in 2014 and 2.72 to 8.50 Mt.ha−1 in 2015 and best four accessions judged by interaction between tannia accession and date of planting was 13 (Ikaro) > 12 (Idoani) > 3 (Ehor) > 10 (Idasen) in May 2014 compared to accessions 6 (Ewu) >10 (Idasen) > 12 (Idoani) > 1 (Ikpoba) planted in June 2015. The differences in sequence suggest that both environment and genetic constitution contribute to Tannia yield.


2017 ◽  
Vol 1 (1) ◽  
pp. 27
Author(s):  
Anak Agung Sagung Putri Risa Andriani ◽  
I Nengah Suaria ◽  
I Wayan Yudiana ◽  
Yohanes Parlindungan Situmeang ◽  
Anak Agung Ngurah Mayun Wirajaya ◽  
...  

Abstract This study aims to determine the effect of treatment of fertilization time and dosage of nitrogen to the growth and yield of peanut plants. This experiment is a two-factor experiment with incomplete randomized block design. The first factor is the time (S) of fertilizer consisting of three levels: During planting (S0), 15 days after planting (S1), 30 days after planting (S2), The second factor is the dosage of Nitrogen (N) fertilizer consisting of three levels: 25 kg/ha (N1), 50 kg/ha (N2). The results showed that treatment of fertilization time and a dose of nitrogen showed no significant effect on plant height, maximum leaf number, leaf area index, the total pod containing, total void pod, total pod number, oven dry weight of oven plants, and harvesting index. The interaction of nitrogen dose with a time of fertilization gave a very real effect to most observed variables except for maximum plant height, maximum leaf number, leaf area, harvest index that is not significant. The high dry weight of seed oven per plant was obtained at the fertilizer interaction treatment at 15 days after planting and the dose of nitrogen 25 kg/ha was 30.33 g and or increased by 152.75% and when compared with the control of 12.00 g. From a result of regression analysis got an optimum dose of nitrogen fertilizer that is 34.15 kg/ha with the dry weight of oven seeds per plant maximum 26.73 g. Keywords: Fertilization time, nitrogen dosage, peanut result


Author(s):  
J. Naga Pavan Kumar Reddy ◽  
Abhinav Dayal ◽  
Prashant Kumar Rai ◽  
Neha Thomas

University of Agriculture Technology and Science, Prayagraj, Uttar Pradesh during the rabi season of 2020-2021. To investigate the Study on the Effect of various organic, growth regulators & chemicals treatments on growth, yield, and yield attributing traits in Radish (Raphanus sativus). The experiment was laid out in Randomized Block Design (RBD) with Thirteen treatments and three replications. The treatments consist of FYM, NAA, GA3 KNo3, ZnSo4, KCl were subjected to study the growth, and yield parameters were recorded. The maximum field emergence percentage (93.30), plant height 30 das (23.50) plant height 60 das (89.57), plant height 90 das (148.23), days to 50% flowering (52.67), number of pods per plant (110.03), dry weight of plant (40.56), seed yield per plant (5.4), biological yield (343.3) harvest index (44.23) were observed in T7 (NAA). Whereas minimum was recorded in T0 (Control) (81.30, 21.60cm, 78.13cm, 139.83cm, 56.20%, 102.33, 32.20, 1.4, 132.20, 33.10).


AGRICA ◽  
2020 ◽  
Vol 7 (1) ◽  
pp. 45-56
Author(s):  
Murdaningsih Murdaningsih

This study aims to determine the effect of NPK Mutiara fertilizer dose on the growth and yield of green beans and determine the optimum dosage of NPK Mutiara fertilizer that can deliver growth and yield optimal green beans. The design used in this study is a randomized block design with treatments used were N0 (without fertilizer NPK NPK 0 kg ha-1 or 0 g plot-1), N1 (NPK fertilizer 125 kg ha-1 or 25 g plot-1), N2 (NPK fertilizer 250 kg ha-1 or 50 g plot-1), N3 (NPK fertilizer 375 kg ha-1 or 75 g), N4 (NPK 500 kg ha-1 or 100 g plot-1). Variable observation in this study was plant height, number of leaves, leaf area, number of pods tan-1 fresh weight stover tan-1, the dry weight of stover tan-1, the dry weight of stover ha-1 dry weight of seed tan-1, heavy ha-1 dry beans, dry weight of 100 seeds. The results showed that treatment of NPK fertilizer dose of 500 kg ha-1 very significant effect on plant height of 27.75 cm, leaf number 8 strands, leaf area 357.78 cm2, Total pods 19.65, fresh weight stover tan-1 96, 25 g, dry weight of stover tan-1 76.00 g, stover dry weight ha-1 19.00 tons, dry weight of seed tan-1 5.36-gram dry weight seed ha-1 1.34 tonnes, the weight of 100 seeds 2.62 gr.


Sign in / Sign up

Export Citation Format

Share Document