Study of the Acoustic Properties of Lighting Systems Based on Hollow Mirrored Tubular Light Guides

2021 ◽  
pp. 32-38
Author(s):  
Sergei Yu. Pleshkov ◽  
Gennaro Bracale ◽  
Alexander L. Kuznetsov
Keyword(s):  
High Frequency ◽  
High Reliability ◽  
Low Frequency ◽  
Scientific Work ◽  
Acoustic Properties ◽  
Sound Waves ◽  
Natural Lighting ◽  
Lighting Systems ◽  
Pass Through ◽  
Light Guides

This scientific work presents test results of energy efficient lighting systems based on mirrored hollow tubular light guides when sound waves of various intensities of low-frequency, mid-frequency and high-frequency ranges pass through them. Technological changes in design of natural lighting systems, which were carried out in order to increase their vibration resistance and noise absorption, are shown here. Studies have proved high reliability of lighting systems in terms of their soundproofing, especially in mid-frequency and high-frequency ranges, which can significantly reduce harmful effects of noise on human body.

scholarly journals High-frequency neural activity predicts word parsing in ambiguous speech streams

2016 ◽  
Vol 116 (6) ◽  
pp. 2497-2512 ◽  
Author(s):  
Anne Kösem ◽  
Anahita Basirat ◽  
Leila Azizi ◽  
Virginie van Wassenhove
Keyword(s):  
High Frequency ◽  
Low Frequency ◽  
Acoustic Properties ◽  
Neural Oscillations ◽  
Speech Comprehension ◽  
Top Down ◽  
Linguistic Representations ◽  
High Frequency Activity ◽  
Speech Percept ◽  
The Brain

During speech listening, the brain parses a continuous acoustic stream of information into computational units (e.g., syllables or words) necessary for speech comprehension. Recent neuroscientific hypotheses have proposed that neural oscillations contribute to speech parsing, but whether they do so on the basis of acoustic cues (bottom-up acoustic parsing) or as a function of available linguistic representations (top-down linguistic parsing) is unknown. In this magnetoencephalography study, we contrasted acoustic and linguistic parsing using bistable speech sequences. While listening to the speech sequences, participants were asked to maintain one of the two possible speech percepts through volitional control. We predicted that the tracking of speech dynamics by neural oscillations would not only follow the acoustic properties but also shift in time according to the participant's conscious speech percept. Our results show that the latency of high-frequency activity (specifically, beta and gamma bands) varied as a function of the perceptual report. In contrast, the phase of low-frequency oscillations was not strongly affected by top-down control. Whereas changes in low-frequency neural oscillations were compatible with the encoding of prelexical segmentation cues, high-frequency activity specifically informed on an individual's conscious speech percept.

Theoretical End Experimental Evaluation of Perforations Effect on Sound Insulation

2017 ◽  
Author(s):  
Olga Khrystoslavenko ◽  
Raimondas Grubliauskas
Keyword(s):  
Noise Reduction ◽  
High Frequency ◽  
Sound Absorption ◽  
Low Frequency ◽  
Experimental Methods ◽  
Glass Wool ◽  
Acoustic Properties ◽  
Sound Insulation ◽  
Frequency Noise ◽  
Sound Reduction

To design a sound-absorbing panel, it is important to identify factors that affect the maximum sound absorption of low, middle and high frequency sounds. Perforation effect is very important for the noise-reducing and noiseabsorbing panels. Perforations are often used for sound reduction. Experimental data shows that the perforation is very effective to absorb low-frequency noise. In the presented study, influence of perforation coefficient of noise reduction was analyzed with theoretical and experimental methods. The experiments were conducted in noise reduction chamber using an perforated construction with glass wool filler. Sound reductions index of 15 dB indicates good acoustic properties of the panel.

Acoustic monitoring of ocean gyres

1986 ◽  
Vol 173 ◽  
pp. 43-53 ◽  
Author(s):  
Walter Munk
Keyword(s):  
Heat Flux ◽  
World War Ii ◽  
Large Scale ◽  
Temporal Frequency ◽  
Low Frequency ◽  
Acoustic Properties ◽  
Sound Waves ◽  
Eddy Heat Flux ◽  
The Difference ◽  
Ray Path

There has been an increased interest in ocean phenomena with horizontal scales comparable to the radius of the Earth, and timescales of years and beyond. These phenomena occur in the presence of intense processes of higher spatial and temporal frequency. An observational programme for the large-scale phenomena has an inherent advantage if it can rely on measurements that are, by their very nature, integrated moments over the prerequisite scale.The oceans provide an excellent medium for transmitting sound waves of low frequency, as demonstrated in the closing days of World War II, and subsequently confirmed by a 20000 km acoustic transmission between Perth, Australia and Bermuda. For the last six years we have been developing a method (Ocean Acoustic Tomography) to take advantage of the favourable ocean acoustic properties. We measure travel time Δ+ from mooring m to mooring n (positive x), and Δ− from n to m. The sum Δ+ + Δ− then gives information about the sound speed C (e.g. temperature) averaged along the acoustic ray path; the difference Δ+ – Δ− gives information about the x-component u of current velocity. The recorded acoustic signal can be decomposed into 10-20 distinct ray arrivals Δi, each with a distinct ray path and associated depth-weighting of the ocean column; the ray travel times can be inverted to yield information about the depth profiles C(z) and u(z). The product 〈C〉 〈u〉 of these range-averaged quantities is related to the climatological large-scale heat flux; the space-time average $\overline{\langle \delta C\,\delta u\rangle}$ is related to the eddy heat flux, and can be estimated by measuring the difference variance (Δ+) – variance (Δ−).

scholarly journals Labyrinthine Structure with Subwavelength and Broadband Sound Insulation

2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Heng Jiang ◽  
Yu Liu ◽  
Wenshuai Xu ◽  
Tao Yang ◽  
Dongliang Pei ◽  
...  
Keyword(s):  
Structural Parameters ◽  
Low Frequency ◽  
Good Control ◽  
Acoustic Properties ◽  
Sound Insulation ◽  
Sound Waves ◽  
Effective Parameters ◽  
Retrieval Method ◽  
S Parameter ◽  
Broadband Sound

In this text, the combination of spiral structure and zigzag channels is introduced to design labyrinthine structures, in which sound waves can propagate alternately in the clockwise and counterclockwise directions. Finite element method and S-parameter retrieval method are used to calculate band structures, effective parameters, and transmission properties of the structures. The influences of different structural parameters on their acoustic properties are also studied. These results show labyrinthine structures have multiple bandgaps in the range of 0 Hz–1000 Hz, and the proportion of bandgaps exceeds 33%, which indicates labyrinthine structures have good broadband properties. The normalized frequency of the lowest bandgaps is far smaller than 1, which indicates the structures take good control of sound waves on subwavelength scale. Combining units with different structural parameters can achieve better sound insulation. This research provides a new kind of space-coiling structure for low-frequency and broadband sound waves control, which have excellent application prospects.

Sound absorptive light comprising nanofibrous resonant membrane applicable in room acoustics

2017 ◽  
Vol 39 (3) ◽  
pp. 362-370 ◽  
Author(s):  
Klara Kalinova
Keyword(s):  
Broad Band ◽  
Low Frequency ◽  
Acoustic Power ◽  
Acoustic Properties ◽  
Room Acoustics ◽  
Sound Waves ◽  
Final Thickness ◽  
Low Frequencies ◽  
Perforated Sheet ◽  
Lower Frequencies

Room acoustic solutions are based on measurements of the acoustic power of the room and acoustic elements with different functions (absorption tiles, absorption ceilings, absorption bodies, diffusers, barriers). This work is focused only on absorption elements with an emphasis on addressing lower-middle frequencies. The design of the material is based on broad band noise. Damping of lower frequencies is restricted to a certain extent by the final thickness of the acoustic material. Nanofibrous resonant membranes will be used in the design to achieve higher sound absorption at lower frequencies in comparison with commercially available materials. The principle of the acoustic system is to use combination of a perforated sheet covered by a nanofibrous resonant membrane, which is brought into forced vibration upon impact of sound waves of low frequency. Practical application:To absorb sounds of high frequencies, porous materials are used. To absorb sounds of low frequencies, resonant membranes are employed. However, these structures absorb only sounds of certain frequency. Nanofibrous layers have unique acoustic properties due to the large specific surface area of the nanofibres, where viscous losses may occur, and also the ability to resonate at its own frequency. The advantage of this technology is the space between the acoustic element with a thickness of 1–2 mm and the wall/ceiling, which can be used for the installation of lighting/audio speakers, etc. The acoustic light prototype has been made.

Simulations of high-resolution images of amorphous silicon films

1986 ◽  
Vol 44 ◽  
pp. 544-545
Author(s):  
G. Y. Fan ◽  
J. M. Cowley
Keyword(s):  
Electron Microscope ◽  
High Frequency ◽  
Fourier Transformation ◽  
Amorphous Materials ◽  
Low Frequency ◽  
Chromatic Aberration ◽  
Structure Information ◽  
Frequency Components ◽  
High Resolution Images ◽  
Spatial Frequency Spectrum

It is well known that the structure information on the specimen is not always faithfully transferred through the electron microscope. Firstly, the spatial frequency spectrum is modulated by the transfer function (TF) at the focal plane. Secondly, the spectrum suffers high frequency cut-off by the aperture (or effectively damping terms such as chromatic aberration). While these do not have essential effect on imaging crystal periodicity as long as the low order Bragg spots are inside the aperture, although the contrast may be reversed, they may change the appearance of images of amorphous materials completely. Because the spectrum of amorphous materials is continuous, modulation of it emphasizes some components while weakening others. Especially the cut-off of high frequency components, which contribute to amorphous image just as strongly as low frequency components can have a fundamental effect. This can be illustrated through computer simulation. Imaging of a whitenoise object with an electron microscope without TF limitation gives Fig. 1a, which is obtained by Fourier transformation of a constant amplitude combined with random phases generated by computer.

SEM image sharpness analysis

1996 ◽  
Vol 54 ◽  
pp. 142-143
Author(s):  
M. T. Postek ◽  
A. E. Vladar
Keyword(s):  
High Frequency ◽  
Low Frequency ◽  
Quantitative Information ◽  
Primary Electron ◽  
Image Sharpness ◽  
Critical Dimensions ◽  
Sem Image ◽  
Frequency Changes ◽  
Electron Microscopes ◽  
Scanning Electron

Fully automated or semi-automated scanning electron microscopes (SEM) are now commonly used in semiconductor production and other forms of manufacturing. The industry requires that an automated instrument must be routinely capable of 5 nm resolution (or better) at 1.0 kV accelerating voltage for the measurement of nominal 0.25-0.35 micrometer semiconductor critical dimensions. Testing and proving that the instrument is performing at this level on a day-by-day basis is an industry need and concern which has been the object of a study at NIST and the fundamentals and results are discussed in this paper.In scanning electron microscopy, two of the most important instrument parameters are the size and shape of the primary electron beam and any image taken in a scanning electron microscope is the result of the sample and electron probe interaction. The low frequency changes in the video signal, collected from the sample, contains information about the larger features and the high frequency changes carry information of finer details. The sharper the image, the larger the number of high frequency components making up that image. Fast Fourier Transform (FFT) analysis of an SEM image can be employed to provide qualitiative and ultimately quantitative information regarding the SEM image quality.

Real Ear Sound Pressure Levels Developed by Three Portable Stereo System Earphones

1992 ◽  
Vol 1 (4) ◽  
pp. 52-55 ◽  
Author(s):  
Gail L. MacLean ◽  
Andrew Stuart ◽  
Robert Stenstrom
Keyword(s):  
High Frequency ◽  
Sound Pressure ◽  
Low Frequency ◽  
Test System ◽  
Output Frequency ◽  
Frequency Effects ◽  
Adult Men ◽  
Frequency Responses ◽  
Significant Difference ◽  
Sound Pressure Levels

Differences in real ear sound pressure levels (SPLs) with three portable stereo system (PSS) earphones (supraaural [Sony Model MDR-44], semiaural [Sony Model MDR-A15L], and insert [Sony Model MDR-E225]) were investigated. Twelve adult men served as subjects. Frequency response, high frequency average (HFA) output, peak output, peak output frequency, and overall RMS output for each PSS earphone were obtained with a probe tube microphone system (Fonix 6500 Hearing Aid Test System). Results indicated a significant difference in mean RMS outputs with nonsignificant differences in mean HFA outputs, peak outputs, and peak output frequencies among PSS earphones. Differences in mean overall RMS outputs were attributed to differences in low-frequency effects that were observed among the frequency responses of the three PSS earphones. It is suggested that one cannot assume equivalent real ear SPLs, with equivalent inputs, among different styles of PSS earphones.

Evaluation of Special Hearing Aids for Deaf Children

1971 ◽  
Vol 36 (4) ◽  
pp. 527-537 ◽  
Author(s):  
Norman P. Erber
Keyword(s):  
Hearing Aids ◽  
High Frequency ◽  
Hearing Aid ◽  
Low Frequency ◽  
Acoustic Stimulation ◽  
Deaf Children ◽  
Frequency Range ◽  
Frequency Limit ◽  
Unpublished Studies ◽  
Published Research

Two types of special hearing aid have been developed recently to improve the reception of speech by profoundly deaf children. In a different way, each special system provides greater low-frequency acoustic stimulation to deaf ears than does a conventional hearing aid. One of the devices extends the low-frequency limit of amplification; the other shifts high-frequency energy to a lower frequency range. In general, previous evaluations of these special hearing aids have obtained inconsistent or inconclusive results. This paper reviews most of the published research on the use of special hearing aids by deaf children, summarizes several unpublished studies, and suggests a set of guidelines for future evaluations of special and conventional amplification systems.

Efeitos do Método Pilates sobre a variabilidade da frequência cardíaca, flexibilidade e variáveis antropométricas em indivíduos sedentários

2016 ◽  
Vol 17 (1) ◽  
pp. 66
Author(s):  
Maria Lina Silva Leite
Keyword(s):  
High Frequency ◽  
Low Frequency

O objetivo deste estudo foi avaliar os efeitos do Método Pilates sobre a variabilidade da frequência cardíaca, na flexibilidade e nas variáveis antropométricas em indivíduos sedentários. O presente estudo contou com 14 voluntárias do sexo feminino, na faixa etária entre 40 e 55 anos, que realizaram 20 sessões de exercícios do Método Pilates, duas vezes por semana, com duração de 45 minutos cada sessão, dividida em três fases: repouso, exercício e recuperação. As variáveis estudadas foram: os dados antropométricos, flexibilidade avaliada utilizando o teste de sentar-e-alcançar com o Banco de Wells, e intervalos R-R usando um cardiotacômetro. O processamento dos sinais da frequência cardíaca foi efetuado em ambiente MatLab 6.1®, utilizando a TWC. Os dados coletados foram submetidos ao teste de normalidade de Shapiro Wilk e foi utilizado o teste de Wilcoxon e Anova One Way (α = 0,05). Nos resultados, observou-se que não houve diferenças significativas entre os valores antropométricos e de frequência cardíaca, porém houve aumento da flexibilidade com o treinamento. Comparando a primeira e a vigésima sessão com relação aos parâmetros low frequency (LF), high frequency (HF), e relação LF/HF, não houve diferença na fase de repouso e foram constatadas diferenças significativas de LF (p = 0,04) e HF (p = 0,04) na fase de exercício e diferença significativa de LF/HF (p = 0,05) na fase de recuperação. Comparando os parâmetros nos períodos de repouso, exercícios e recuperação durante a primeira sessão e durante a vigésima sessão, não houve diferença significativa nos parâmetros LF, HF e LF/HF. Pode-se concluir que, em relação à flexibilidade, foi observada uma melhora significativa, enquanto a análise da frequência cardíaca caracterizou a intensidade do exercício de 50% da capacidade funcional das voluntárias. Em relação aos parâmetros LF, HF e LF/HF foram observados um aumento da variabilidade da frequência cardíaca, provavelmente produto da atividade do Método Pilates. A Transformada Wavelet (TWC) mostrou-se um Método adequado para as análises da variabilidade da frequência cardíaca.Palavras-chave: frequência cardíaca, Transformada Wavelet, Pilates.

Sign in / Sign up

Export Citation Format

Share Document