scholarly journals Deploying Low Carbon Public Procurement to Accelerate Carbon Removal

2021 ◽  
Vol 3 ◽  
Author(s):  
Eric Dunford ◽  
Robert Niven ◽  
Christopher Neidl

Carbon dioxide removal (CDR) will be required to keep global temperature rise below 2°C based on IPCC models. Greater adoption of carbon capture utilization and storage (CCUS) technologies will drive demand for CDR. Public procurement of low carbon materials is a powerful and under-utilized tool for accelerating the development and of CCUS through a targeted and well-regulated approach. The policy environment is nascent and presents significant barriers for scaling and guiding emerging technology solutions. The concrete sector has unique attributes that make it ideally suited for large-scale low-carbon public procurement strategies. This sector offers immediate opportunities to study the efficacy of a supportive policy and regulatory environment in driving the growth of CCUS solutions.

2021 ◽  
Author(s):  
Tom Terlouw ◽  
Karin Treyer ◽  
christian bauer ◽  
Marco Mazzotti

Prospective energy scenarios usually rely on Carbon Dioxide Removal (CDR) technologies to achieve the climate goals of the Paris Agreement. CDR technologies aim at removing CO2 from the atmosphere in a permanent way. However, the implementation of CDR technologies typically comes along with unintended environmental side-effects such as land transformation or water consumption. These need to be quantified before large-scale implementation of any CDR option by means of Life Cycle Assessment (LCA). Direct Air Carbon Capture and Storage (DACCS) is considered to be among the CDR technologies closest to large-scale implementation, since first pilot and demonstration units have been installed and interactions with the environment are less complex than for biomass related CDR options. However, only very few LCA studies - with limited scope - have been conducted so far to determine the overall life-cycle environmental performance of DACCS. We provide a comprehensive LCA of different low temperature DACCS configurations - pertaining to solid sorbent-based technology - including a global and prospective analysis.


Energies ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1945 ◽  
Author(s):  
Lars Ingolf Eide ◽  
Melissa Batum ◽  
Tim Dixon ◽  
Zabia Elamin ◽  
Arne Graue ◽  
...  

Presently, the only offshore project for enhanced oil recovery using carbon dioxide, known as CO2-EOR, is in Brazil. Several desk studies have been undertaken, without any projects being implemented. The objective of this review is to investigate barriers to the implementation of large-scale offshore CO2-EOR projects, to identify recent technology developments, and to suggest non-technological incentives that may enable implementation. We examine differences between onshore and offshore CO2-EOR, emerging technologies that could enable projects, as well as approaches and regulatory requirements that may help overcome barriers. Our review shows that there are few, if any, technical barriers to offshore CO2-EOR. However, there are many other barriers to the implementation of offshore CO2-EOR, including: High investment and operation costs, uncertainties about reservoir performance, limited access of CO2 supply, lack of business models, and uncertainties about regulations. This review describes recent technology developments that may remove such barriers and concludes with recommendations for overcoming non-technical barriers. The review is based on a report by the Carbon Sequestration Leadership Forum (CSLF).


2021 ◽  
Author(s):  

This compendium showcases new and innovative low carbon technologies that have potential to be deployed in Asia and the Pacific. It features 10 technologies for capturing, utilizing, or storing carbon dioxide. The key aspects of these technologies are discussed together with their advantages and status of development and commercialization. The compendium aims to contribute to low carbon development in the region by promoting further research, innovation, and investment in emerging technologies.


2021 ◽  
Vol 13 (21) ◽  
pp. 12278
Author(s):  
Katja Witte

To limit global warming, the use of carbon capture and storage technologies (CCS) is considered to be of major importance. In addition to the technical–economic, ecological and political aspects, the question of social acceptance is a decisive factor for the implementation of such low-carbon technologies. This study is the first literature review addressing the acceptance of industrial CCS (iCCS). In contrast to electricity generation, the technical options for large-scale reduction of CO2 emissions in the energy-intensive industry sector are not sufficient to achieve the targeted GHG neutrality in the industrial sector without the use of CCS. Therefore, it will be crucial to determine which factors influence the acceptance of iCCS and how these findings can be used for policy and industry decision-making processes. The results show that there has been limited research on the acceptance of iCCS. In addition, the study highlights some important differences between the acceptance of iCCS and CCS. Due to the technical diversity of future iCCS applications, future acceptance research must be able to better address the complexity of the research subject.


2021 ◽  
Vol 3 ◽  
Author(s):  
James Palmer ◽  
Wim Carton

Conscious of the need to limit climate warming to 1.5 degrees, many countries are pinning their hopes upon carbon dioxide (CO2) removal through the industrial-scale combination of bioenergy with carbon capture and storage (BECCS). But it is not merely by storing captured CO2 that BECCS enthusiasts hope to harness biomass combustion for climate repair. Increasingly, more productive and ostensibly profitable uses for captured CO2 are also being identified. The concept of BECCS is evolving, in other words, into “BECCUS” —bioenergy with carbon capture, utilisation and storage. Against this backdrop, this Perspective sets out two main arguments. Firstly, regardless of the precise use to which captured CO2 is put, efforts to predicate large-scale negative emissions upon biomass combustion should in our view be understood as attempts to reconfigure the fundamental relationship between climate change and energy use, turning the latter from a historical driver of climate warming into a remedial tool of climate repair. Secondly, the emergence of BECCUS cannot be understood solely as an attempt to make bioenergy-based negative emissions more economically viable. At stake, rather, are conflicting ideas about the role that intensive energy use should play in future global sustainable development pathways. This Perspective therefore calls for governance frameworks for carbon dioxide removal to adjudicate between conflicting approaches to achieving negative emissions not only on the basis of technical efficiency, or even “on-the-ground” social and environmental impacts, but also according to compatibility with socially legitimate visions and understandings of what energy—and more specifically energy use—should ultimately be for in the post-fossil fuel era.


2021 ◽  
Author(s):  
Tom Terlouw ◽  
Karin Treyer ◽  
christian bauer ◽  
Marco Mazzotti

Prospective energy scenarios usually rely on carbon dioxide removal (CDR) technologies to achieve the climate goals of the Paris Agreement. CDR technologies aim at removing CO2 from the atmosphere in a permanent way. However, the implementation of CDR technologies typically comes along with unintended environmental side-effects such as land transformation or water consumption. These need to be quantified before large-scale implementation of any CDR option by means of life cycle assessment (LCA). Direct air carbon capture and storage (DACCS) is considered to be among the CDR technologies closest to large-scale implementation, since first pilot and demonstration units have been installed and interactions with the environment are less complex than for biomass related CDR options. However, only very few LCA studies - with limited scope - have been conducted so far to determine the overall life-cycle environmental performance of DACCS. We provide a comprehensive LCA of different low temperature DACCS configurations - pertaining to solid sorbent-based technology - including a global and prospective analysis.


2015 ◽  
Vol 6 (1) ◽  
pp. 865-906
Author(s):  
K. B. Z. Ogutu ◽  
F. D'Andrea ◽  
M. Ghil ◽  
C. Nyandwi ◽  
M. M. Manene ◽  
...  

Abstract. This study uses the global climate–economy–biosphere (CoCEB) model developed in Part 1 to investigate economic aspects of deforestation control and carbon sequestration in forests, as well as the efficiency of carbon capture and storage (CCS) technologies as policy measures for climate change mitigation. We assume – as in Part 1 – that replacement of one technology with another occurs in terms of a logistic law, so that the same law also governs the dynamics of reduction in carbon dioxide emission using CCS technologies. In order to take into account the effect of deforestation control, a slightly more complex description of the carbon cycle than in Part 1 is needed. Consequently, we add a biomass equation into the CoCEB model and analyze the ensuing feedbacks and their effects on per capita gross domestic product (GDP) growth. Integrating biomass into the CoCEB and applying deforestation control as well as CCS technologies has the following results: (i) low investment in CCS contributes to reducing industrial carbon emissions and to increasing GDP, but further investment leads to a smaller reduction in emissions, as well as in the incremental GDP growth; and (ii) enhanced deforestation control contributes to a reduction in both deforestation emissions and in atmospheric carbon dioxide concentration, thus reducing the impacts of climate change and contributing to a slight appreciation of GDP growth. This effect is however very small compared to that of low-carbon technologies or CCS. We also find that the result in (i) is very sensitive to the formulation of CCS costs, while to the contrary, the results for deforestation control are less sensitive.


2021 ◽  
Author(s):  
Tom Terlouw ◽  
Karin Treyer ◽  
christian bauer ◽  
Marco Mazzotti

Prospective energy scenarios usually rely on Carbon Dioxide Removal (CDR) technologies to achieve the climate goals of the Paris Agreement. CDR technologies aim at removing CO2 from the atmosphere in a permanent way. However, the implementation of CDR technologies typically comes along with unintended environmental side-effects such as land transformation or water consumption. These need to be quantified before large-scale implementation of any CDR option by means of Life Cycle Assessment (LCA). Direct Air Carbon Capture and Storage (DACCS) is considered to be among the CDR technologies closest to large-scale implementation, since first pilot and demonstration units have been installed and interactions with the environment are less complex than for biomass related CDR options. However, only very few LCA studies - with limited scope - have been conducted so far to determine the overall life-cycle environmental performance of DACCS. We provide a comprehensive LCA of different low temperature DACCS configurations - pertaining to solid sorbent-based technology - including a global and prospective analysis.


Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4601
Author(s):  
Matteo Vitali ◽  
Cristina Zuliani ◽  
Francesco Corvaro ◽  
Barbara Marchetti ◽  
Alessandro Terenzi ◽  
...  

Carbon capture and storage is considered an effective mitigation strategy to reduce the most challenging emissions from heavy industries and gas processing. The safe transport of carbon dioxide via pipelines is an important aspect for developing large-scale Carbon Capture and Storage projects. Dispersion modeling for heavy gas such as carbon dioxide is considerably different from natural gas. The set up for modeling simulations is more challenging than conventional natural gas pipeline for several reasons, such as the differences in thermodynamics that must be considered. Moreover, when the carbon dioxide is transported in dense or liquid phase, the rapid phase changing, and possible consequent formation of solids should be considered. Finally, the equation of state required for accurate prediction of parameters is generally different than the ones applicable for natural gas. The main scope of this comprehensive review is to identify the most important parameters, critical events, suitable models, and identification of dispersion modeling issues. An extensive literature review of experiments conducted in the last ten years has been developed, experimental data, integral and simplified model, as well as CFD modeling issues has been identified and reported in the work proposed to highlight the advances and the gaps that could need further research activities.


Sign in / Sign up

Export Citation Format

Share Document