scholarly journals Risks and Safety of CO2 Transport via Pipeline: A Review of Risk Analysis and Modeling Approaches for Accidental Releases

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4601
Author(s):  
Matteo Vitali ◽  
Cristina Zuliani ◽  
Francesco Corvaro ◽  
Barbara Marchetti ◽  
Alessandro Terenzi ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Natural Gas ◽  
Carbon Capture ◽  
Large Scale ◽  
Carbon Capture And Storage ◽  
Cfd Modeling ◽  
Dispersion Modeling ◽  
Extensive Literature ◽  
Research Activities ◽  
And Storage

Carbon capture and storage is considered an effective mitigation strategy to reduce the most challenging emissions from heavy industries and gas processing. The safe transport of carbon dioxide via pipelines is an important aspect for developing large-scale Carbon Capture and Storage projects. Dispersion modeling for heavy gas such as carbon dioxide is considerably different from natural gas. The set up for modeling simulations is more challenging than conventional natural gas pipeline for several reasons, such as the differences in thermodynamics that must be considered. Moreover, when the carbon dioxide is transported in dense or liquid phase, the rapid phase changing, and possible consequent formation of solids should be considered. Finally, the equation of state required for accurate prediction of parameters is generally different than the ones applicable for natural gas. The main scope of this comprehensive review is to identify the most important parameters, critical events, suitable models, and identification of dispersion modeling issues. An extensive literature review of experiments conducted in the last ten years has been developed, experimental data, integral and simplified model, as well as CFD modeling issues has been identified and reported in the work proposed to highlight the advances and the gaps that could need further research activities.

scholarly journals A Review on CO2 Capture Technologies with Focus on CO2-Enhanced Methane Recovery from Hydrates

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 387
Author(s):  
Salvatore F. Cannone ◽  
Andrea Lanzini ◽  
Massimo Santarelli
Keyword(s):  
Natural Gas ◽  
Carbon Capture ◽  
Power Plants ◽  
Large Scale ◽  
Carbon Capture And Storage ◽  
Co2 Removal ◽  
Methane Recovery ◽  
The World ◽  
Co2 Transportation ◽  
And Storage

Natural gas is considered a helpful transition fuel in order to reduce the greenhouse gas emissions of other conventional power plants burning coal or liquid fossil fuels. Natural Gas Hydrates (NGHs) constitute the largest reservoir of natural gas in the world. Methane contained within the crystalline structure can be replaced by carbon dioxide to enhance gas recovery from hydrates. This technical review presents a techno-economic analysis of the full pathway, which begins with the capture of CO2 from power and process industries and ends with its transportation to a geological sequestration site consisting of clathrate hydrates. Since extracted methane is still rich in CO2, on-site separation is required. Focus is thus placed on membrane-based gas separation technologies widely used for gas purification and CO2 removal from raw natural gas and exhaust gas. Nevertheless, the other carbon capture processes (i.e., oxy-fuel combustion, pre-combustion and post-combustion) are briefly discussed and their carbon capture costs are compared with membrane separation technology. Since a large-scale Carbon Capture and Storage (CCS) facility requires CO2 transportation and storage infrastructure, a technical, cost and safety assessment of CO2 transportation over long distances is carried out. Finally, this paper provides an overview of the storage solutions developed around the world, principally studying the geological NGH formation for CO2 sinks.

scholarly journals Carbon Removal as Carbon Revival? Bioenergy, Negative Emissions, and the Politics of Alternative Energy Futures

2021 ◽  
Vol 3 ◽  
Author(s):  
James Palmer ◽  
Wim Carton
Keyword(s):  
Carbon Dioxide ◽  
Climate Warming ◽  
Carbon Capture ◽  
Alternative Energy ◽  
Large Scale ◽  
Energy Use ◽  
Carbon Capture And Storage ◽  
Biomass Combustion ◽  
Negative Emissions ◽  
And Storage

Conscious of the need to limit climate warming to 1.5 degrees, many countries are pinning their hopes upon carbon dioxide (CO2) removal through the industrial-scale combination of bioenergy with carbon capture and storage (BECCS). But it is not merely by storing captured CO2 that BECCS enthusiasts hope to harness biomass combustion for climate repair. Increasingly, more productive and ostensibly profitable uses for captured CO2 are also being identified. The concept of BECCS is evolving, in other words, into “BECCUS” —bioenergy with carbon capture, utilisation and storage. Against this backdrop, this Perspective sets out two main arguments. Firstly, regardless of the precise use to which captured CO2 is put, efforts to predicate large-scale negative emissions upon biomass combustion should in our view be understood as attempts to reconfigure the fundamental relationship between climate change and energy use, turning the latter from a historical driver of climate warming into a remedial tool of climate repair. Secondly, the emergence of BECCUS cannot be understood solely as an attempt to make bioenergy-based negative emissions more economically viable. At stake, rather, are conflicting ideas about the role that intensive energy use should play in future global sustainable development pathways. This Perspective therefore calls for governance frameworks for carbon dioxide removal to adjudicate between conflicting approaches to achieving negative emissions not only on the basis of technical efficiency, or even “on-the-ground” social and environmental impacts, but also according to compatibility with socially legitimate visions and understandings of what energy—and more specifically energy use—should ultimately be for in the post-fossil fuel era.

Study on Dispersion of Carbon Dioxide over the Shrubbery Region

2021 ◽  
Vol 9 ◽  
Author(s):  
Wang Huiru ◽  
You Zhanping ◽  
Mo Fan ◽  
Liu Bin ◽  
Han Peng
Keyword(s):  
Carbon Dioxide ◽  
Carbon Capture ◽  
Carbon Capture And Storage ◽  
Dispersion Pattern ◽  
Buried Pipeline ◽  
Dynamic Impact ◽  
Coverage Area ◽  
Computational Fluid Dynamics Cfd ◽  
And Storage ◽  
Terrain Features

In the carbon capture and storage (CCS) infrastructure, the risk of a high-pressure buried pipeline rupture possibly leads to catastrophic accidents due to the release of tremendous amounts of carbon dioxide (CO2). Therefore, a comprehensive understanding of the effects of CO2 dispersion pattern after release from CCS facilities is essential to allow the appropriate safety precautions to be taken. Due to variations in topography above the pipeline, the pattern of CO2 dispersion tends to be affected by the real terrain features, such as trees and hills. However, in most previous studies, the dynamic impact of trees on the wind field was often approximated to linear treatment or even ignored. In this article, a computational fluid dynamics (CFD) model was proposed to predict CO2 dispersion over shrubbery areas. The shrubs were regarded as a kind of porous media, and the model was validated against the results from experiment. It was found that shrubbery affected the flow field near the ground, enhancing the lateral dispersion of CO2. Compared with that of the shrub-free terrain, the coverage area of the three shrub terrains at 60 s increased by 8.1 times, 6.7 times, and 9.1 times, respectively. The influence of shrub height and porosity on CO2 dispersion is nonlinear. This research provides reliable data for the risk assessment of CCS.

Densities of the carbon dioxide+hydrogen, a system of relevance to carbon capture and storage

2013 ◽  
Vol 13 ◽  
pp. 78-86 ◽  
Author(s):  
Yolanda Sanchez-Vicente ◽  
Trevor C. Drage ◽  
Martyn Poliakoff ◽  
Jie Ke ◽  
Michael W. George
Keyword(s):  
Carbon Dioxide ◽  
Carbon Capture ◽  
Carbon Capture And Storage ◽  
And Storage

scholarly journals Field-Based Stable Isotope Analysis of Carbon Dioxide by Mid-Infrared Laser Spectroscopy for Carbon Capture and Storage Monitoring

2014 ◽  
Vol 86 (24) ◽  
pp. 12191-12198 ◽  
Author(s):  
Robert van Geldern ◽  
Martin E. Nowak ◽  
Martin Zimmer ◽  
Alexandra Szizybalski ◽  
Anssi Myrttinen ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Stable Isotope ◽  
Laser Spectroscopy ◽  
Stable Isotope Analysis ◽  
Carbon Capture ◽  
Isotope Analysis ◽  
Carbon Capture And Storage ◽  
Mid Infrared ◽  
Infrared Laser Spectroscopy ◽  
And Storage

scholarly journals Harnessing Escherichia coli for bio-based production of formate under pressurized H 2 and CO 2 gases.

2021 ◽  
Author(s):  
Magali Roger ◽  
Thomas C. P. Reed ◽  
Frank Sargent
Keyword(s):  
Escherichia Coli ◽  
Carbon Dioxide ◽  
Formic Acid ◽  
Carbon Capture ◽  
Continuous Production ◽  
Carbon Capture And Storage ◽  
Physiological Role ◽  
Anaerobic Growth ◽  
Formate Hydrogenlyase ◽  
And Storage

Escherichia coli is gram-negative bacterium that is a workhorse for biotechnology. The organism naturally performs a mixed-acid fermentation under anaerobic conditions where it synthesises formate hydrogenlyase (FHL-1). The physiological role of the enzyme is the disproportionation of formate in to H 2 and CO 2 . However, the enzyme has been observed to catalyse hydrogenation of CO 2 given the correct conditions, and so has possibilities in bio-based carbon capture and storage if it can be harnessed as a hydrogen-dependent CO 2 -reductase (HDCR). In this study, an E. coli host strain was engineered for the continuous production of formic acid from H 2 and CO 2 during bacterial growth in a pressurised batch bioreactor. Incorporation of tungsten, in place of molybdenum, in FHL-1 helped to impose a degree of catalytic bias on the enzyme. This work demonstrates that it is possible to couple cell growth to simultaneous, unidirectional formate production from carbon dioxide and develops a process for growth under pressurised gases. IMPORTANCE Greenhouse gas emissions, including waste carbon dioxide, are contributing to global climate change. A basket of solutions is needed to steadily reduce emissions, and one approach is bio-based carbon capture and storage. Here we present out latest work on harnessing a novel biological solution for carbon capture. The Escherichia coli formate hydrogenlyase (FHL-1) was engineered to be constitutively expressed. Anaerobic growth under pressurised H 2 and CO 2 gases was established and aqueous formic acid was produced as a result. Incorporation of tungsten in to the enzyme in place of molybdenum proved useful in poising FHL-1 as a hydrogen-dependent CO 2 reductase (HDCR).

scholarly journals Life Cycle Assessment of Direct Air Carbon Capture and Storage with Low-Carbon Energy Sources

2021 ◽  
Author(s):  
Tom Terlouw ◽  
Karin Treyer ◽  
christian bauer ◽  
Marco Mazzotti
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Carbon Capture ◽  
Large Scale ◽  
Carbon Capture And Storage ◽  
Low Carbon ◽  
Solid Sorbent ◽  
Low Carbon Energy ◽  
And Storage ◽  
Limited Scope

Prospective energy scenarios usually rely on Carbon Dioxide Removal (CDR) technologies to achieve the climate goals of the Paris Agreement. CDR technologies aim at removing CO2 from the atmosphere in a permanent way. However, the implementation of CDR technologies typically comes along with unintended environmental side-effects such as land transformation or water consumption. These need to be quantified before large-scale implementation of any CDR option by means of Life Cycle Assessment (LCA). Direct Air Carbon Capture and Storage (DACCS) is considered to be among the CDR technologies closest to large-scale implementation, since first pilot and demonstration units have been installed and interactions with the environment are less complex than for biomass related CDR options. However, only very few LCA studies - with limited scope - have been conducted so far to determine the overall life-cycle environmental performance of DACCS. We provide a comprehensive LCA of different low temperature DACCS configurations - pertaining to solid sorbent-based technology - including a global and prospective analysis.

scholarly journals Deploying Low Carbon Public Procurement to Accelerate Carbon Removal

2021 ◽  
Vol 3 ◽  
Author(s):  
Eric Dunford ◽  
Robert Niven ◽  
Christopher Neidl
Keyword(s):  
Carbon Dioxide ◽  
Carbon Capture ◽  
Large Scale ◽  
Carbon Materials ◽  
Public Procurement ◽  
Emerging Technology ◽  
Regulatory Environment ◽  
Low Carbon ◽  
Procurement Strategies ◽  
And Storage

Carbon dioxide removal (CDR) will be required to keep global temperature rise below 2°C based on IPCC models. Greater adoption of carbon capture utilization and storage (CCUS) technologies will drive demand for CDR. Public procurement of low carbon materials is a powerful and under-utilized tool for accelerating the development and of CCUS through a targeted and well-regulated approach. The policy environment is nascent and presents significant barriers for scaling and guiding emerging technology solutions. The concrete sector has unique attributes that make it ideally suited for large-scale low-carbon public procurement strategies. This sector offers immediate opportunities to study the efficacy of a supportive policy and regulatory environment in driving the growth of CCUS solutions.

Sign in / Sign up

Export Citation Format

Share Document