scholarly journals A General Modeling Approach for Shock Absorbers: 2 DoF MR Damper Case Study

2021 ◽  
Vol 7 ◽  
Author(s):  
Jorge de-J. Lozoya-Santos ◽  
Juan C. Tudon-Martinez ◽  
Ruben Morales-Menendez ◽  
Olivier Sename ◽  
Andrea Spaggiari ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Degrees Of Freedom ◽  
Linear Models ◽  
Mr Damper ◽  
Shock Absorbers ◽  
Magneto Rheological ◽  
The Mathematical Model ◽  
Force Displacement ◽  
Standard Tests

A methodology is proposed for designing a mathematical model for shock absorbers; the proposal is guided by characteristic diagrams of the shock absorbers. These characteristic diagrams (Force-Displacement, Velocity-Acceleration) are easily constructed from experimental data generated by standard tests. By analyzing the diagrams at different frequencies of interest, they can be classified into one of seven patterns, to guide the design of a model. Finally, the identification of the mathematical model can be obtained using conventional algorithms. This methodology has generated highly non-linear models for 2 degrees of freedom magneto-rheological dampers with high precision (2–10% errors).

Modelling and Simulation of NO2 Dispersion Phenomenon in Atmosphere by Analytical-Experimental Methods

2008 ◽  
Vol 59 (10) ◽  
Author(s):  
Delia Perju ◽  
Harieta Pirlea ◽  
Gabriela-Alina Brusturean ◽  
Dana Silaghi-Perju ◽  
Sorin Marinescu
Keyword(s):  
Mathematical Model ◽  
Nitrogen Dioxide ◽  
Modeling And Simulation ◽  
Human Health ◽  
Experimental Methods ◽  
Negative Effects ◽  
Real Situation ◽  
Experimental Values ◽  
The Mathematical Model

The European laws and recently the Romanian ones impose more and more strict norms to the large nitrogen dioxide polluters. They are obligated to continuously improve the installations and products so that they limit and reduce the nitrogen dioxide pollution, because it has negative effects on the human health and environment. In this paper are presented these researches made within a case study for the Timi�oara municipality, regarding the modeling and simulation of the nitrogen dioxide dispersion phenomenon coming from various sources in atmosphere with the help of analytical-experimental methods. The mathematical model resulting from these researches is accurately enough to describe the real situation. This was confirmed by comparing the results obtained based on the model with real experimental values.

Damping characteristics of a magneto-rheological damper with dual independent controllable ducts

2021 ◽  
pp. 1045389X2110188
Author(s):  
Jianqiang Yu ◽  
Xiaomin Dong ◽  
Tao Wang ◽  
Zhengmu Zhou ◽  
Yaqin Zhou
Keyword(s):  
Dynamic Range ◽  
Fluid Flows ◽  
Mr Damper ◽  
Viscous Damping ◽  
The Novel ◽  
The Finite Element Method ◽  
Damping Force ◽  
Damping Characteristics ◽  
Magneto Rheological ◽  
The Mathematical Model

This paper presents the damping characteristics of a linear magneto-rheological (MR) damper with dual controllable ducts based on numerical and experimental analysis. The novel MR damper consisting of a dual-rod cylinder system and a MR valve is used to reduce the influences of viscous damping force and improve dynamic range. Driven by the dual-rod cylinder system, MR fluid flows in the MR valve. The pressure drop of the MR valve with dual independent controllable ducts can be controlled by tuning the current of two independent coils. Based on the mathematical model and the finite element method, the damping characteristics of the MR damper is simulated. A prototype is designed and tested on MTS machine to evaluate its damping characteristics. The results show that the working states and damping force of the MR damper can be controlled by the two independent coils.

scholarly journals Developing an Analytical Model and Computing Tool for Optimizing Lapping Operations of Flat Objects Made of Alloyed Steels

Materials ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1343 ◽  
Author(s):  
Tudor Deaconescu ◽  
Andrea Deaconescu
Keyword(s):  
Mathematical Model ◽  
Surface Roughness ◽  
Material Properties ◽  
Depth Of Cut ◽  
Operation Optimization ◽  
Abrasive Grains ◽  
Finishing Process ◽  
Real World Applications ◽  
The Mathematical Model

Lapping is a finishing process where loose abrasive grains contained in a slurry are pressed against a workpiece to reduce its surface roughness. To perform a lapping operation, the user needs to set the values of the respective lapping conditions (e.g., pressure, depth of cut, the rotational speed of the pressing lap plate, and alike) based on some material properties of the workpiece, abrasive grains, and slurry, as well as on the desired surface roughness. Therefore, a mathematical model is needed that establishes the relationships among the abovementioned parameters. The mathematical model can be used to develop a lapping operation optimization system, as well. To this date, such a model and system are not available mainly because the relationships among lapping conditions, material properties of abrasive grains and slurry, and surface roughness are difficult to establish. This study solves this problem. It presents a mathematical model establishing the required relationships. It also presents a system developed based on the mathematical model. In addition, the efficacy of the system is also shown using a case study. This study thus helps systematize lapping operations in regard to real-world applications.

Adapted Bouc-Wen Analytical Model for Romanian SERB-C Seismic Dampers Used in Buildings Protection System

2016 ◽  
Vol 823 ◽  
pp. 91-94 ◽  
Author(s):  
Adriana Ionescu ◽  
Cristian Burada ◽  
Mihai Negru
Keyword(s):  
Mathematical Model ◽  
Computational Simulation ◽  
Experimental Tests ◽  
Protection System ◽  
Hysteretic Model ◽  
Specific Adaptation ◽  
Analytical Simulation ◽  
The Mathematical Model ◽  
Force Displacement ◽  
Unusual Shape

In this paper is presented a new mathematical model which is intended to simulate the hysteretic phenomenon of SERB-C Romanian friction device for damping and dissipation of earthquake energy used for buildings. These devices have unusual shape of force-displacement loop which can be simulated with our new model which represents a specific adaptation of the well known Bouc-Wen hysteretic model. The purpose of this analytical simulation is to determine a relation for the hysteretic loop which was obtained by experimental tests performed by the authors. The mathematical model presented in this paper can be used in computational simulation of a building protected with these types of devices, in order to determine the anti-seismic performances of a Romanian friction building protection system.

The Design of Shock Absorbers for Chemical Equipments

2012 ◽  
Vol 479-481 ◽  
pp. 1283-1287
Author(s):  
Xin Yang ◽  
Xiao Yu Guo ◽  
Ming Liang Ding
Keyword(s):  
Mathematical Model ◽  
Chemical Process ◽  
Shock Absorber ◽  
Low Cost ◽  
Field Validation ◽  
Shock Absorption ◽  
Vibration Problem ◽  
Shock Absorbers ◽  
The Mathematical Model ◽  
Validation Testing

A low cost shock absorber easy to install and tune was designed to solve the vibration problem produced by the compressor in chemical process. By establishing the mathematical model of the dynamic shock absorption, the shock absorber characteristics were analyzed theoretically. The preliminary experiment was conducted on the testing platform to simulate the factory conditions. The shock absorber was then installed on the compressor for the field validation. Testing results agree well with theory and the shock absorber showed good damping performance.

Engineering Constraint Management Based on an Occurrence Matrix Approach

1993 ◽  
Vol 115 (1) ◽  
pp. 103-109 ◽  
Author(s):  
R. Agrawal ◽  
G. L. Kinzel ◽  
R. Srinivasan ◽  
K. Ishii
Keyword(s):  
Mathematical Model ◽  
Degrees Of Freedom ◽  
Inequality Constraints ◽  
Design Parameters ◽  
Constraint Management ◽  
Management Concepts ◽  
Occurrence Matrix ◽  
Torsion Bar ◽  
The Mathematical Model ◽  
Management Algorithms

In many mechanical systems, the mathematical model can be characterized by m nonlinear equations in n unknowns. The m equations could be either equality constraints or active inequality constraints in a constrained optimization framework. In either case, the mathematical model consists of (n-m) degrees of freedom, and (n-m) unknowns must be specified before the system can be analyzed. In the past, designers have often fixed the set of (n-m) specification variables and computed the remaining n variables using the n equations. This paper presents constraint management algorithms that give the designer complete freedom in the choice of design specifications. An occurrence matrix is used to store relationships among design parameters and constraints, to identify dependencies among the variables, and to help prevent redundant specification. The interactive design of a torsion bar spring is used to illustrate constraint management concepts.

scholarly journals Applied Mathematical Approach for Decision-Making in Building Plan Design

2018 ◽  
Vol 3 (9) ◽  
pp. 39
Author(s):  
Grit Ngowtanasuwan
Keyword(s):  
Mathematical Model ◽  
Mathematical Models ◽  
Publishing House ◽  
Unit Cost ◽  
Construction Cost ◽  
Model Unit ◽  
International Publishing ◽  
Plan Design ◽  
The Mathematical Model

This article presents a method for solving decision in building plan design by using a mathematical model (nonlinear programming). First objective is to formulate mathematical models for analysis in dividing rooms and dimensions in a building plan. Secondly, to calculate the dimensions and room sizes which have minimum construction cost. A case study of a condominium building plan was analyzed in this research. The results found application of the mathematical model was applicable. The mathematical models were formulated, the minimum construction cost was ฿723,000 (US$24,100) and usable area in the condominium was 67.5 m2 and followed the assigned design constraints.Keywords: Building plan design; Mathematical model; Unit cost;eISSN 2398-4295 © 2018. The Authors. Published for AMER ABRA cE-Bs by e-International Publishing House, Ltd., UK. This is an open-access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). Peer–review under responsibility of AMER (Association of Malaysian Environment-Behaviour Researchers), ABRA (Association of Behavioural Researchers on Asians) and cE-Bs (Centre for Environment-Behaviour Studies), Faculty of Architecture, Planning & Surveying, Universiti Teknologi MARA, Malaysia. DOI:

scholarly journals Mathematical Model of Forest Fire Soil-thrower Movement

2020 ◽  
Author(s):  
Olga Dornyak ◽  
Ivan Bartenev ◽  
Mikhail Drapalyuk ◽  
Dmitry Stupnikov ◽  
Sergey Malyukov ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Forest Fire ◽  
Forest Fires ◽  
Degrees Of Freedom ◽  
Translational Motion ◽  
Steady Motion ◽  
Technological Parameters ◽  
Lagrange Equations ◽  
Milling Tool ◽  
The Mathematical Model

The design of a forest fire soil-thrower made to prevent and eliminate ground forest fires is presented. A mathematical model of machine movement has been developed, which enables to study the laws of the interaction process of the design with the soil. It is accepted that the machine has two degrees of freedom. The mathematical model has been obtained using the Lagrange equations of the second kind. The design and technological parameters of the forest fire soil-throwing machine, affecting the efficiency of its work, including mass and width of the grip of the ripper casing, mass, radius and frequency of rotation of the milling tool, the number and geometric parameters of the blades are taken into account. Mathematical model enables to determine the effect of these parameters on the characteristics of the movement of ripper casing and milling working body. A mathematical model is needed to synchronize the translational motion of the unit and the rotational motion of the rotor. Formulas have been obtained for the steady motion of the forest fire soil-thrower, that determine the hauling power of tractor and torque that ensures the operation of milling tools.

scholarly journals An Estimation of Dates Production Function in Karbala Governorate For The Agricultural Season 2020 (Al-jadual Al-gharby District A case Study)

2021 ◽  
Vol 923 (1) ◽  
pp. 012070
Author(s):  
Sadeq H. Hussein ◽  
Hayder Hamed Blaw
Keyword(s):  
Mathematical Model ◽  
Least Squares ◽  
Production Function ◽  
Returns To Scale ◽  
Ordinary Least Squares ◽  
Total Production ◽  
Logarithmic Function ◽  
The Mathematical Model

Abstract This study aimed to detect the most important factor that affects dates production. About 108 questionary forms collecttted palm orchard farmers in Karbala to estimate the dates production function in Karbala governorate for the agricultural season 2021 (the district of Al-jadual Al-Gharby). The study distributed those formmmsss for about 10% of the total palm orchards in Al-jadual Al-Gharby district of the holy governorate of Karbala. The study used the method of ordinary Least squares (OLS) to estimate the mathematical model of the function. The results showed that the double Logarithmic function in terms of its estimation of the estimated Coefficients by one unit leads to a corresponding change in the produced quality of dates and the same direction by 0.188 0.808) % respectively, and that the capital variable is more in fluently in production than the work variable. As for the total production elasticity (the sum of the partial elasticities of the resources used), which represents returns to scale, it amounted to about (0.996), which indicates a decrease in the return to scale.

Mathematical Relationship Between Palpation Forces and Displacement Associated With Restriction

2019 ◽  
Vol 3 (1) ◽  
Author(s):  
Anneke Hoyer ◽  
Brian F. Degenhardt ◽  
Todd Hammond Palumbo ◽  
Steven J. Webb ◽  
Roger C. Fales
Keyword(s):  
Experimental Data ◽  
Mathematical Model ◽  
Goodness Of Fit ◽  
The Body ◽  
Low Back ◽  
Human Volunteers ◽  
Tissue Compliance ◽  
Key Variables ◽  
The Mathematical Model ◽  
Force Displacement

Abstract Based on the clinical data, a mathematical model was developed that characterized the palpation forces and the associated deformation/displacement of the surface of the body when osteopathic clinicians examine the low back or lumbar spine region. The purpose of this work was to better understand the haptic perception of clinicians who use palpation to assist in their assessment of patients with low back pain. Clinicians use palpation to identify areas of reduced tissue compliance thought to be associated with restriction of segmental vertebral motion. Using existing experimental data generated by multiple clinicians examining human volunteers, palpation forces and associated displacements were modeled by using three key variables: stiffness, damping, and inertia of the system. Of the total number of force application cycles analyzed, 92% had a goodness of fit, R2, that was better than 95% (R2≥ 0.95). When comparing the experimental data to the response of the three-parameter force/displacement mathematical model, the mathematical model delivered an accurate representation of palpation forces and displacements. A normalized stiffness difference (NSD) was generated to compare to clinician assessments. Recommendations for design specifications of a palpation-training device were suggested.

Sign in / Sign up

Export Citation Format

Share Document