scholarly journals The Effect of N Fertilizer Application Timing on Wheat Yield on Chernozem Soil

Agronomy ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1413
Author(s):  
Marko M. Kostić ◽  
Aristotelis C. Tagarakis ◽  
Nataša Ljubičić ◽  
Dragana Blagojević ◽  
Mirjana Radulović ◽  
...  

The challenges of the global food supply and environment conservation require ongoing scientific observations of soil-to-plant and plant-to-environment interactions with the aim of improving agriculture resource management. This study included observations of winter wheat yield and biomass of four varieties over three consecutive growing seasons and four site-year cases to assess the effects of nitrogen (N) fertilization rate and time of application on grain yield and biomass. For different wheat varieties, the full factorial design was performed, where factorial combinations of year, location, fall and spring N applications were laid out in a randomized complete block design. The N rate significantly influenced grain yield and biomass production efficiency. The time of N application had a highly significant effect on grain yield, biomass and NUE traits. The N rate of 120 kg ha−1 was recognized as a breakpoint over which the grain yield and biomass showed a downtrend. N application in the fall had a significantly higher impact on grain yield and biomass compared to spring N application. The major contribution of wheat variability production belongs to seasonal climate circumstances (<85%) and consequential intrinsic soil properties. The average difference of grain yield between varieties was 15.75%, and 12% of biomass, respectively.

2017 ◽  
Vol 9 (3) ◽  
pp. 1540-1543 ◽  
Author(s):  
Neema Bisht ◽  
V. K. Sah ◽  
Kavita Satyawali ◽  
Salil Tiwari

Field experiment was conducted during the Rabi season of 2013-14 on an established plantation at old site of Agroforestry Research Centre, Patharchatta of G.B. Pant University of Agriculture and Technology, Pantna-gar, District Udham Singh Nagar, Uttarakhand, India to evaluate the effect of poplar based agroforestry system and open system (without poplar) on yield of different wheat varieties and soil physico-chemical properties.The experi-ment was laid out in randomized block design with 4 treatments and each replicated thrice under both the growing conditions. The crop treatments are wheat varieties viz. UP-2572, PBW-550, DBW-711 and PBW-373. The highest grain yield of all the wheat varieties was obtained under open farming system. Highest grain yield of wheat was rec-orded in UP-2572 (45.3 q/ha) under open farming system. Agroforestry is proven land use system for vertically en-hancing soil health against unsuitable weather condition. The distribution of soil properties was detected from the depth 0-15 cm in poplar based agroforestry system and as well as in open system. During the experiment it was found that agroforestry add more nutrients to the soil compared to open system i.e. highest pH (7.9), EC (0.43 dSm-1), available soil nitrogen (253.48 kg/ha), potassium (219.63 kg/ha) were achieved with UP-2572 while organic car-bon (1.07%) and available soil phosphorus (22.72 kg/ha) were attained with DBW-711.


2020 ◽  
Vol 12 (5) ◽  
pp. 1735 ◽  
Author(s):  
Aixia Xu ◽  
Lingling Li ◽  
Junhong Xie ◽  
Xingzheng Wang ◽  
Jeffrey A. Coulter ◽  
...  

Nitrogen (N) fertilizer plays an important role in wheat yield, but N application rates vary greatly, and there is a lack of data to quantify the residual effects of N fertilization on soil N availability. A 17-yr experiment was conducted in a semiarid area of the Loess Plateau of China to assess the effects of N fertilization on spring wheat (Triticum aestivum L.) grain yield, N uptake, N utilization efficiency, and residual soil nitrate. Treatments included a non-N-fertilized control and annual application of 52.5, 105.0, 157.5, and 210.0 kg N ha−1 in the first two years (2003 and 2004). In the third year (2005), the four main plots with N fertilizer application were split. In one subplot, N fertilization was continued as mentioned previously, while in the other subplot, N fertilization was stopped. The concentration of NO3-N in the 0–110 cm depth soil layers was significantly affected by N application, with higher N rates associated with greater soil NO3-N concentration. With the annual application of N over 17 years, residual soil NO3-N concentration in the 100–200 cm soil layer in the last study year was significantly greater than that in the non-N-fertilized control and was increased with rate of N application. There was a significant positive relationship of soil NO3-N in the 0–50 cm and 50–110 cm soil layers at wheat sowing with wheat grain N content and yield. Wheat grain yield in the third year (2005) was significantly, i.e., 22.57–59.53%, greater than the unfertilized treatment after the N application was stopped. Nitrogen use efficiency decreased in response to each increment of added N fertilizer, and was directly related to N harvest index and grain yield. Therefore, greater utilization of residual soil N through appropriate N fertilizer rates could enhance nitrogen use efficiency while reducing the cost of crop production and risk of N losses to the environment. For these concerns, optimum N fertilizer application rate for spring wheat in semiarid Loess Plateau is about 105 kg N ha−1, which is below the threshold value of 170 kg N ha−1 per year as defined by most EU countries.


2019 ◽  
Vol 9 (4) ◽  
pp. 661-664
Author(s):  
S. Shibeshi

Bread wheat (Triticum aestivum L.) is the most important cereal occupying a protruding position among major food crops in the world in terms of acreage and production and is an important cereal crop which is receives the most attention of specialists in plant breeding and production in the world wide in general and in Ethiopia in particular. And also a number of improved bread wheat varieties have been released by different research centres for different agro-ecology in Ethiopia. Evaluate the performance of different bread wheat varieties at diverse agro-ecology is an important for effective selection of the variety. This experiment was conducted on ten bread wheat varieties against local check (Digalu) at Meskan and Dalocha wereda with the objective of identify and recommend high performance in terms of yield, insect pest tolerant, and stable varieties. The varieties were assigned in randomized complete block design with four replication. Data were collected on six major agronomic traits. Based on the mean separation, the highest average grain yield was recorded from Hidasse and Ogolcho varieties with 5210 and 5080 kg/ha respectively. However the lowest average yield (3220kg/ha) was recorded from Digalu variety. In both locations Digalu variety provided the lowest yield due to high susceptibility for stem rust. Statistically, the variety Hidasse gave the highest number of tillers per plant and the tallest spikes length at both locations those are positive contributions to grain yield. There were significantly positive and negative correlations between traits. In this study, it is found that there is 38.19% increment of yield for using Hidasse variety (high yielder) as compared to Digalu variety (low yielder) at the study area. Therefore, farmers located at the study areas are recommended to use Hidasse variety to increase bread wheat yield.


2019 ◽  
Vol 2019 ◽  
pp. 1-12
Author(s):  
Tyler W. Steusloff ◽  
Gurbir Singh ◽  
Kelly A. Nelson ◽  
Peter P. Motavalli

Claypan soils have a high potential for N loss, which can lower corn (Zea mays L.) yields. Field research was conducted from 2011 to 2013 in Northeast Missouri to determine corn yield, plant population, and grain quality response to N application timings (fall vs. spring) and five N sources/placements at two different N rates (84 and 168 kg·N·ha−1) on a poorly drained claypan soil. The five N source/placement systems were no-till (NT)/surface broadcast urea ammonium nitrate (UAN) (Surface UAN) or strip-till (ST)/deep banded UAN (deep UAN), NT/surface broadcast UAN plus Nitamin Nfusion (surface NF) or ST/deep banded UAN plus Nitamin Nfusion (deep NF), and ST/deep banded anhydrous ammonia (AA) (deep AA). The field trial was a split-plot randomized complete block design with four replications. Deep UAN with a fall N application produced the highest grain yield (8.12 to 9.12 Mg·ha−1) at 84 and 168 kg·N·ha−1, but it was less effective with a spring application in 2011. Fall deep AA produced the lowest grain yields (5.97 and 6.8 Mg·ha−1) in 2013 at 84 and 168 kg·N·ha−1 potentially due to wet soil conditions at the time of application. Warmer and wetter soil conditions during April-May of 2013 resulted in relatively higher grain yields compared to cooler and drier soil conditions in 2011 with all spring-applied N source/placement treatments. Extreme drought in the 2012 growing season resulted in poor corn growth. Farmers may need to consider fall N applications on claypan soils because spring N application might be riskier since corn grain yield was generally greater than or equal to spring-applied treatments.


2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Temesgen Godebo ◽  
Fanuel Laekemariam ◽  
Gobeze Loha

AbstractBread wheat (Triticum aestivum L.) is one of the most important cereal crops in Ethiopia. The productivity of wheat is markedly constrained by nutrient depletion and inadequate fertilizer application. The experiment was conducted to study the effect of nitrogen (N) and potassium (K) fertilizer rates on growth, yield, nutrient uptake and use efficiency during 2019 cropping season on Kedida Gamela Woreda, Kembata Tembaro Zone Southern Ethiopia. Factorial combinations of four rates of N (0, 23, 46 and 69 kg Nha−1) and three rates of K2O (0, 30 and 60 kg Nha−1) in the form of urea (46–0-0) and murate of potash (KCl) (0-0-60) respectively, were laid out in a randomized complete block design with three replications. The results showed that most parameters viz yield, yield components, N uptake and use efficiency revealed significant differences (P < 0.05) due to interaction effects of N and K. Fertilizer application at the rate of 46 N and 30 kg K ha−1 resulted in high grain yield of 4392 kg ha− 1 and the lowest 1041 from control. The highest agronomic efficiency of N (52.5) obtained from the application of 46 kg N ha−1. Maximum physiological efficiency of N (86.6 kg kg−1) and use efficiency of K (58.6%) was recorded from the interaction of 46 and 30 kg K ha−1. Hence, it could be concluded that applying 46 and 30 kg K ha−1was resulted in high grain yield and economic return to wheat growing farmers of the area. Yet, in order to draw sound conclusion, repeating the experiment in over seasons and locations is recommended.


2012 ◽  
Vol 36 (2) ◽  
pp. 475-483 ◽  
Author(s):  
José Hildernando Bezerra Barreto ◽  
Ismail Soares ◽  
José Almeida Pereira ◽  
Antonio Marcos Esmeraldo Bezerra ◽  
José Aridiano Lima de Deus

Nitrogen is the most important nutrient for rice (Oryza sativa L) yields. This study aimed to evaluate the response of upland rice cultivars to N rate and application times in a randomized block design, in subdivided plots with four replications. The studied factors were five rice cultivars (BRS MG Curinga, BRS Monarca, BRS Pepita, BRS Primavera, and BRS Sertaneja), three application times (100 % at planting, 50 % at planting - 50 % at tillering and 100 % at tillering) and four N rates (0, 50, 100, and 150 kg ha-1). All cultivars responded to increased rates and different times of N application, especially BRS Primavera and BRS Sertaneja, which were the most productive when 50 % N rates were applied at sowing and 50 % at tillering. The response of cultivar BRS Monarca to N fertilization was best when 100 % of the fertilizer was applied at tillering.


2015 ◽  
Vol 36 (6Supl2) ◽  
pp. 4071 ◽  
Author(s):  
Marcos Vinícius Mansano Sarto ◽  
Maria do Carmo Lana ◽  
Leandro Rampim ◽  
Jean Sérgio Rosset ◽  
Jaqueline Rocha Wobeto

<p>An improvement in soil chemical properties and crop development with silicate application has been confirmed in several plant species. The effects of silicate application on soil chemical properties and wheat growth were investigated in the present study. The experiment was carried out in 8-L plastic pots in a greenhouse. Treatments were arranged in a randomized block design in a 3 × 5 factorial: three soils [Rhodic Acrudox (Ox1), Rhodic Hapludox (Ox2) and Arenic Hapludult (Ult)] and five silicate rates (0, 1, 2, 4 and 6 Mg ha–1 of calcium/magnesium silicate), with four replications. The plant length, number of spikes per pot, shoot dry matter and grain yield, were measured after 115 days of wheat (<em>Triticum aestivum </em>L.) growth. Changes in the soil chemical properties (pH, H+ + Al3+, Al3+, P, K, Ca, Mg, Si, Cu, Zn, Fe and Mn) were analyzed after wheat harvest. Application of calcium/magnesium silicate reduces the potential acidity (H+ + Al3+) and Al3+ phytotoxic; and increases the soil pH, available Ca, Mg and Si, cation exchange capacity (CEC) and soil base saturation. Silicate application did not affect the available P, exchangeable K and availability of micronutrients (Cu, Zn, Fe and Mn) in the three soils. The application of calcium/magnesium silicate in an acid clayey Rhodic Hapludox improves the development and yield of wheat; however, the silicate application in soil with pH higher to 5.3 and high Si availability does not affect the agronomic characteristics and grain yield of wheat.</p><p><strong> </strong></p>


2012 ◽  
Vol 9 (2) ◽  
pp. 205-210 ◽  
Author(s):  
MR Debnath ◽  
M Jahiruddin ◽  
MM Rahman ◽  
MA Haque

The effect of different rates of boron application on wheat cv. Bijoy was studied through a field experiment at    Bangladesh Agricultural University (BAU) farm, Mymensingh during 2009-10 rabi season. The BAU farm belongs to    Old Brahmaputra Floodplain agroecological zone (AEZ 9). Texturally the soil was silt loam, with 7.2 pH, 0.81%    organic matter and 0.15 mg kg-1 available boron content. The experiment was laid out in a randomized complete    block design with five boron rates and four replications. Boron rates were 0, 0.75, 1.5, 2.25 and 3.0 kg ha-1, with boric    acid as a source. Every plot received blanket doses of 115 kg N, 25 kg P, 75 kg K and 15 kg S ha-1 from urea, TSP,    MoP and gypsum, respectively. Treatment receiving B @ 2.25 kg ha-1 produced the highest grain yield (4.22 t ha-1) which was statistically identical with that obtained with 1.75 kg B ha-1. However, the crop response curve showed    1.90 kg ha-1 to be the optimum boron rate for the maximization of wheat yield. The lowest grain yield (2.84 t/ha) was    recorded with control treatment. There was a positive relationship between grain yield and number of grains spike-1.   Boron had significant influence on N, P, K, S and B uptake by the crop which, in deed, was more influenced by crop    yield and less by nutrient concentration, except N and B uptake where concentration had more influence than yield.   DOI: http://dx.doi.org/10.3329/jbau.v9i2.10987   J. Bangladesh Agril. Univ. 9(2): 205–210, 2011


2016 ◽  
Vol 11 (2) ◽  
pp. 107 ◽  
Author(s):  
Massimo Blandino ◽  
Federico Marinaccio ◽  
Amedeo Reyneri

The increasing demand for a high and homogeneous technological quality of common wheat (<em>Triticum aestivum</em> L.) points out the necessity of improving wheat with by a higher protein (GPC) and gluten content, strength of dough (W) and dough stability. Among the current crop practices, late-season nitrogen (N) fertilization, from heading to flowering, is generally considered the practice that has the most effects on the storage proteins and technological quality of the grain. In order to explore the influence late-season N application can have on the dough properties and on the formation of homogeneous lots in more detail, a research was set up between 2007 and 2013, over 6 growing seasons at different sites in North West Italy using the Bologna cultivar in each of the trials. Three different late-season N fertilization strategies were compared: T1, control without a late distribution of N; T2, foliar N fertilization at flowering; T3, top-dress granular soil fertilization at the beginning of heading. A randomized complete block experimental design with four replicates was adopted. The grain yield, GPC, W and P/L indexes were analyzed. Moreover, the rheological and enzymatic properties of the samples were studied using a Mixolab® analyser (Chòpin Technologies, Paris, France). Grain yield was found to be unaffected by the fertilization treatments, while the late N application (T2, T3) significantly increased GPC. Only the granular N fertilization (T3) increased the W index compared to T1, while the P/L index was not affected by any of the fertilization strategies. Furthermore, the T3 strategy was always more effective in reducing the variability of the W index than the T2 and the T1 strategies. Water absorption and dough development time were higher in T3, than in T1, while intermediate results were reached for T2. The effect of late-season N fertilization was also significant on the starch behaviour of the dough, as an increase in starch gelatinization and retrogradation was observed. In short, the top-dress granular N fertilizer applied at the beginning of heading (T3) led to a more constant increase in GPC and flour rheological quality than the foliar application. Moreover, the adoption of this fertilization strategy resulted in a reduction in qualitative variability under different environmental and soil conditions.


Agronomy ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1081 ◽  
Author(s):  
Oladapo Adeyemi ◽  
Reza Keshavarz-Afshar ◽  
Emad Jahanzad ◽  
Martin Leonardo Battaglia ◽  
Yuan Luo ◽  
...  

Corn (Zea mays L.) grain is a major commodity crop in Illinois and its production largely relies on timely application of nitrogen (N) fertilizers. Currently, growers in Illinois and other neighboring states in the U.S. Midwest use the maximum return to N (MRTN) decision support system to predict corn N requirements. However, the current tool does not factor in implications of integrating cover crops into the rotation, which has recently gained attention among growers due to several ecosystem services associated with cover cropping. A two-year field trail was conducted at the Agronomy Research Center in Carbondale, IL in 2018 and 2019 to evaluate whether split N application affects nitrogen use efficiency (NUE) of corn with and without a wheat (Triticum aestivum L.) cover crop. A randomized complete block design with split plot arrangements and four replicates was used. Main plots were cover crop treatments (no cover crop (control) compared to a wheat cover crop) and subplots were N timing applications to the corn: (1) 168 kg N ha−1 at planting; (2) 56 kg N ha−1 at planting + 112 kg N ha−1 at sidedress; (3) 112 kg N ha−1 at planting + 56 kg N ha−1 at sidedress; and (4) 168 kg N ha−1 at sidedress along with a zero-N control as check plot. Corn yield was higher in 2018 than 2019 reflecting more timely precipitation in that year. In 2018, grain yield declined by 12.6% following the wheat cover crop compared to no cover crop control, indicating a yield penalty when corn was preceded with a wheat cover crop. In 2018, a year with timely and sufficient rainfall, there were no yield differences among N treatments and N balances were near zero. In 2019, delaying the N application improved NUE and corn grain yield due to excessive rainfall early in the season reflecting on N losses which was confirmed by lower N balances in sidedressed treatments. Overall, our findings suggest including N credit for cereals in MRTN prediction model could help with improved N management in the Midwestern United States.


Sign in / Sign up

Export Citation Format

Share Document