scholarly journals Heat Waves and Broomrape Are the Major Constraints for Lentil Cultivation in Southern Spain

Agronomy ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1871
Author(s):  
Diego Rubiales ◽  
Ana Moral ◽  
Fernando Flores
Keyword(s):  
Seed Yield ◽  
Heat Tolerance ◽  
Significant Variation ◽  
Heat Waves ◽  
Grain Filling ◽  
Excessive Heat ◽  
Filling Stage ◽  
Complete Resistance ◽  
Low Altitude ◽  
Grain Filling Stage

There is potential for expanding lentil cultivation to dry and warm Mediterranean rain-fed environments at low altitudes, where early sowings are recommended to profit from winter rains and escape drought and excessive heat at the grain filling stage. In cooler areas, frost might be a problem in the early sowings, however, in warmer areas such as our low altitude warm southern Spanish environments the most detrimental factor on lentil seed yield appeared to be high temperatures at grain-filling stage, particularly heat waves of more than 5 days with Tmax > 30 °C. This was followed by broomrape infection, the combination of both being dramatic. We detected variation for stress tolerance, with S17 and R7 accessions outstanding for all stress indexes used, followed by S23, Nsir, S6, and S12. Broomrape infection ranked second risk in the area. No complete resistance to broomrape was identified, but there was a significant variation in the level of infection, with accessions S14 and R17 being the more resistant across environments. This offers prospects for combining heat tolerance and broomrape resistance by breeding.

scholarly journals Character association and path co-efficient analysis in wheat (Triticum aestivum L.)

2017 ◽  
Vol 42 (3) ◽  
pp. 571-588
Author(s):  
MF Amin ◽  
M Hasan ◽  
NCD Barma ◽  
MA Rahman ◽  
MM Rahman
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Canopy Temperature ◽  
Grain Filling ◽  
Vegetative Stage ◽  
Research Centre ◽  
Physiological Maturity ◽  
Filling Stage ◽  
Days To Heading ◽  
Grain Filling Stage

The experiment was carried out with 50 wheat lines to study their mean, range, cv (%), correlation co- efficient, and path co- efficient considering 14 different morphological characters at the experimental field of Regional Wheat Research Centre (RWRC), Bangladesh Agricultural Research Institute (BARI), Gazipur during December 2010 to April 2011. Significant variation was observed among the genotypes for all characters studied. In general, genotypic correlations were higher than the phenotypic correlations. It indicates that there was an inherent association among them which was adversely influenced by the environment. The correlation coefficients showed that, seed yield was negatively and significantly correlated with days to heading (DTH), plant height (PHT), days to anthesis (DTA), days to physiological maturity (DPM), and canopy temperature at anthesis stage (CTanth.) but only negatively correlated with canopy temperature at vegetative stage (CTveg.), canopy temperature at grain filling stage (CTgf.), spikelets per spike both genotypically and phenotypically and grain per spike showed genotypically negative correlation. Path analysis showed that plant height (PHT), days to physiological maturity (DPM), canopy temperature at grain filling stage (CTgf.), and thousand grain weight (TGW) influenced seed yield directly in positive direction but days to heading (DTH), days to anthesis (DTA), grain filling duration (GFD), grain filling rate (GFR), Chlorophyll content at anthesis stage (CHLA), canopy temperature at vegetative stage (CTveg.), canopy temperature at anthesis stage (CTanth.), spikelets per spike, and grains per spike had negative direct effect on seed yield. Considering analytical findings of correlation co-efficient, path co-efficient analysis and field performance, the genotypes G 3, G 10, G 11, G 12, G13, G 21, G 29, G 35, G 38, G 40, G 46 and G 48 were found suitable for future breeding programme.Bangladesh J. Agril. Res. 42(3): 571-588, September 2017

scholarly journals Detrimental effects of heat stress on grain weight and quality in rice (Oryza sativa L.) are aggravated by decreased relative humidity

PeerJ ◽  
2021 ◽  
Vol 9 ◽  
pp. e11218
Author(s):  
Haoliang Yan ◽  
Chunhu Wang ◽  
Ke Liu ◽  
Xiaohai Tian
Keyword(s):  
Heat Stress ◽  
Relative Humidity ◽  
Heat Tolerance ◽  
Grain Filling ◽  
Grain Weight ◽  
Maximum Temperature ◽  
Daily Maximum Temperature ◽  
Filling Stage ◽  
Head Rice ◽  
Grain Filling Stage

There is concern over the impact of global warming on rice production due increased heat stress, coupled with decreased relative humidity (RH). It is unknown how rice yield and quality are affected by heat stress and decreased RH during the grain filling stage. We conducted experiments in controlled growth chambers on six rice cultivars, varying in heat tolerance using 12 combinative treatments of three factors: two RH levels (75% and 85%), three temperature levels (the daily maximum temperature at 33 °C, 35 °C, and 37 °C), and two durations (8 d and 15 d after anthesis). Results showed that RH75% with temperature treatments significantly reduced grain weight, which was higher than RH85%. The same trend was also observed for both head rice rate and chalkiness. R168 was the most heat-tolerant cultivar, but it still had some differences in grain weight, head rice rate, and chalkiness between the two RH regimes. The lower RH was most detrimental at 35 °C, and to a lesser extent at 33 °C, but had a negligible effect at 37 °C. Our results provide a better understanding of temperature and RH’s interaction effects on rice quality during the grain filling stage, suggesting that RH should be considered in heat tolerance screening and identification to facilitate rice breeding and genetic improvement.

scholarly journals Effects of Irrigation Levels on the Yield of Chickpea (Cicer Arietinum Linn) Due to Incidence of Helicoverpa Armigera

2021 ◽  
Vol 50 (4) ◽  
pp. 1203-1207
Author(s):  
Keshav Mehra ◽  
Veer Sing
Keyword(s):  
Seed Yield ◽  
Helicoverpa Armigera ◽  
Grain Filling ◽  
Flowering Stage ◽  
Larval Population ◽  
Filling Stage ◽  
Helicoverpa Armígera ◽  
Initiation Stage ◽  
Grain Filling Stage ◽  
Irrigation Levels

Effects of four different irrigation levels viz., One irrigation at 50 per cent flowering stage, one irrigation at grain filling/pod initiation stage, two irrigations (one at 50 per cent flowering + one at grain filling stage), control (without irrigation) on the incidence of gram pod borer, Helicoverpa armigera (Hubner) on chickpea were studied during Rabi, 2014-15 and 2015-16 at Research Farm, College of Agriculture, Bikaner (Rajasthan), India. Results revealed that the highest mean larval population (3.12 larvae per 5 plants) and maximum pod damage (33.24%) were recorded in the crop which was irrigated twice viz., one at 50 per cent flowering stage and second at grain filling stage. The lowest larval population (2.03 larvae per 5 plants) with minimum pod damage (8.34%) was recorded in the crop where irrigation was not given. The maximum seed yield (11.05 q/ha) was obtained from the crop which was irrigated two times and minimum seed yield (7.56 q/ha) was obtained in control. Bangladesh J. Bot. 50(4): 1203-1207, 2021 (December)

Effect of Temperature during Grain Filling Stage on Endosperm Structure and Apperance Quality of Aromatic Rice

2012 ◽  
Vol 460 ◽  
pp. 286-289 ◽  
Author(s):  
Zhen Jiang Xu ◽  
Li Zhong Xiao ◽  
Hong Liu ◽  
Yong Hao Ren ◽  
Zhi Lin Li
Keyword(s):  
Grain Filling ◽  
Effect Of Temperature ◽  
Rice Grain ◽  
Aromatic Rice ◽  
Starch Granules ◽  
Filling Stage ◽  
Appearance Quality ◽  
Endosperm Structure ◽  
Grain Filling Stage

Based on the experiment of two inbred aromatic rice varieties and one hybrid aromatic rice line treated under four different temperatures( daymean temperature 21°C, 23°C, 26°C and 30°C respectively) during grain filling stage in phytotrons, the shape and arrangement of endosperm starch granules in rice grain transection were observed by scanning electron microscope and the related characteristics of rice grain qualities of chalky percent and chalkiness were analyzed at the same time. The results showed that under the lower temperature( daymean temperature21°C and 23°C), many large compound starch granules with clear angulars packed together regularly without significant natural gaps bewteen starch granules in the tansectional endosperm. However, with the increase of temperature, starch granules in the transectional endosperm were changed from regularly shaped and closely and orderly arranged to various shaped and chaoticly arranged with obvious natural gaps between starch granules, which was closely consistent with the poorer appearance quality under the higher temperature, which indicated that the endosperm structure is closely related with appearance quality of aromatic rice.

scholarly journals Variation of 13C and 15N enrichments in different plant components of labeled winter wheat (Triticum aestivum L.)

PeerJ ◽  
2019 ◽  
Vol 7 ◽  
pp. e7738
Author(s):  
Zhaoan Sun ◽  
Shuxia Wu ◽  
Biao Zhu ◽  
Yiwen Zhang ◽  
Roland Bol ◽  
...  
Keyword(s):  
Triticum Aestivum ◽  
Winter Wheat ◽  
Grain Filling ◽  
Triticum Aestivum L ◽  
N Fertilization ◽  
Wheat Growth ◽  
Filling Stage ◽  
N Enrichment ◽  
Two Stages ◽  
Grain Filling Stage

Information on the homogeneity and distribution of 13carbon (13C) and nitrogen (15N) labeling in winter wheat (Triticum aestivum L.) is limited. We conducted a dual labeling experiment to evaluate the variability of 13C and 15N enrichment in aboveground parts of labeled winter wheat plants. Labeling with 13C and 15N was performed on non-nitrogen fertilized (−N) and nitrogen fertilized (+N, 250 kg N ha−1) plants at the elongation and grain filling stages. Aboveground parts of wheat were destructively sampled at 28 days after labeling. As winter wheat growth progressed, δ13C values of wheat ears increased significantly, whereas those of leaves and stems decreased significantly. At the elongation stage, N addition tended to reduce the aboveground δ13C values through dilution of C uptake. At the two stages, upper (newly developed) leaves were more highly enriched with 13C compared with that of lower (aged) leaves. Variability between individual wheat plants and among pots at the grain filling stage was smaller than that at the elongation stage, especially for the −N treatment. Compared with those of 13C labeling, differences in 15N excess between aboveground components (leaves and stems) under 15N labeling conditions were much smaller. We conclude that non-N fertilization and labeling at the grain filling stage may produce more uniformly 13C-labeled wheat materials, whereas the materials were more highly 13C-enriched at the elongation stage, although the δ13C values were more variable. The 15N-enriched straw tissues via urea fertilization were more uniformly labeled at the grain filling stage compared with that at the elongation stage.

scholarly journals Role of growth regulators and plant water extracts on the productivity and water use efficiency of wheat genotypes under limited water supply

2019 ◽  
Vol 35 (6) ◽  
Author(s):  
Safdar Hussain ◽  
Abdul Rehman ◽  
Muhammad Akram ◽  
Javaid Iqbal ◽  
Tahira Batool Qaisrani ◽  
...  
Keyword(s):  
Growth Regulators ◽  
Block Design ◽  
Compatible Solutes ◽  
Water Extract ◽  
Grain Filling ◽  
Plant Water ◽  
Wheat Genotypes ◽  
Water Extracts ◽  
Filling Stage ◽  
Grain Filling Stage

Empowerment of wheat genotypes by application of growth regulators, compatible solutes and plant extracts under water restriction is an important strategy for getting sustainable yield. Field trail was performed at the research area of the Faculty of Agricultural Sciences, Ghazi University, Dera Ghazi Khan, Pakistan. Three wheat cultivars Aas-2011, Faisalabad- 2008 and Triple dwarf-1 were subjected to drought stress (skipping the irrigation at grain filling stage). The wheat genotypes were subjected to treatments viz., T1 i.e. All normal irrigation without application of abscisic acid (ABA), salicylic acid (SA), moringa (MLE) and mulberry leaf water extract (MBLE), T2­ i.e. skipping the irrigation at grain filling stage and application of 2µM ABA, T3 i.e. skipping the irrigation at grain filling stage and application of 10 m mol SA, T4 i.e. skipping the irrigation at grain filling stage and application of 15% MLE and T5 i.e. skipping the irrigation at grain filling stage and application of 10% MBLE. The experiment was laid out in Randomized Complete Block Design with factorial arrangement and repeated three times. From this study it is concluded that Aas-2011 shown best result under drought condition by applying growth regulators and plant water extracts. rs and plant water extracts.

Sign in / Sign up

Export Citation Format

Share Document