scholarly journals Crop Response to Combined Availability of Soil Water and Its Salinity Level: Theory, Experiments and Validation on Golf Courses

Agronomy ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2012
Author(s):  
Jiftah Ben-Asher ◽  
Jose Beltrao ◽  
Gulom Bekmirzaev ◽  
Thomas Panagopoulos

The phenomenological expression showing crop yield to be directly dependent on water deficiency, under saline conditions, has encouraged a continued focus on salinity as a viable approach to increase crop yields. This work reassesses crop response to availability of saline soil water ASW in two stages (A) Develop a simple approach suggesting that permanent wilting point (WP) increases under high saline soil water tension and relative yield of Lettuce (Lactuca sativa L., var longifolia Lam., cv. Nevada) and maize (Zea Mays L., cv. Jubilee sweet) decrease. (B) Using a deterministic numerical soil water model to validate the theory on Bermuda grass of golf courses. The experimental plots were established in the North Negev, Israel (Sweet corn) and the Algarve, Portugal (Lettuce and Bermuda grass covering the golf courses). Sprinkler irrigation and line source techniques were used for water application, creating a saline gradient under a precise irrigation water distribution. Two salinity empirical models were tested (Mass and Hoffman MH and van Genuchten–Gupta vGG). Their empirical models were modified and instead of soil electrical conductivity of irrigation water (ECe) we used wilting point (WP) and RASW to follow the changes in relative yield. The validation was conducted with theoretical soil plant atmosphere water (SPAW) to predict the results on golf courses. It is concluded that an alternative S-shaped response model provides better fit to our experimental data sets. Modified MH model (Yr = Y/Ymax = a* (ASW–threshold’s constant) revealed that a single dimensionless curve could be used to express yield—salinity interference when represented by varying ASW. The vGG model: vGG can represent salt tolerance of most crops, by using varying wilting point of average root zone salinity, at which the yield has declined by 50%. The abscissa of both models was based on WP rather than the standard soil electrical conductivity (ECw). The correlation between the experimental data and WP or relative available soil water (RASW) was acceptable and, therefore, their usefulness for prediction of relative yield is acceptable as well. The objectives of this study were: 1. To develop a simple model describing the effect of salinity through soil water availability on crop production; 2. To replace the standard varying soil electrical conductivity ECe used by MH and vGG models by two soil parameters (at wilting point- θwp and at field capacity ϴfc) in order to describe the relationship between them and relative yield. 3. Validate the new model with respect to independent salinity on Golf courses and a mathematical deterministic model.

2000 ◽  
Vol 80 (1) ◽  
pp. 13-22 ◽  
Author(s):  
Z. J. Sun ◽  
G. D. Young ◽  
R. A. McFarlane ◽  
B.M. Chambers

A series of laboratory experiments was conducted, in order to systematically explore the effect of soil electrical conductivity on soil moisture determination using time domain reflectometry (TDR). A Moisture Point MP-917 soil moisture instrument (E.S.I. Environmental Sensors Inc., Victoria, BC, Canada) was used to measure propagation time (time delay) of a step function along a probe imbedded in fine sand with different moisture and salinity. The volumetric soil water content was independently determined using a balance. With the help of the diode-switching technique, MP-917 could detect the reflection from the end of the probe as the electrical conductivity of saturated soil extract (ECe) increased to 15.29 dS m−1. However, the relationship between volumetric soil water content and propagation time expressed as T/Tair (the ratio of propagation time in soil to that in air over the same distance) deviated from a linear relationship as the conductivity exceeded 3.72 dS m−1. At the same water content, the time delay in a saline soil was longer than that in a non-saline soil. This leads to an over-estimation of volumetric soil water content when the linear calibration was applied. A logarithmic relationship between volumetric soil water content and T/Tair has been developed and this relation includes soil electrical conductivity as a parameter. With this new calibration, it is possible to precisely determine the volumetric water content of highly saline soil using TDR. Key words: Time domain reflectometry, time delay, bulk electrical conductivity (σ), volumetric soil water content (θ), relative permittivity or dielectric constant (εr), propagation velocity Vp


2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Glécio Machado Siqueira ◽  
Jorge Dafonte Dafonte ◽  
Montserrat Valcárcel Armesto ◽  
Ênio Farias França e Silva

The apparent soil electrical conductivity (ECa) was continuously recorded in three successive dates using electromagnetic induction in horizontal (ECa-H) and vertical (ECa-V) dipole modes at a 6 ha plot located in Northwestern Spain. One of the ECadata sets was used to devise an optimized sampling scheme consisting of 40 points. Soil was sampled at the 0.0–0.3 m depth, in these 40 points, and analyzed for sand, silt, and clay content; gravimetric water content; and electrical conductivity of saturated soil paste. Coefficients of correlation between ECaand gravimetric soil water content (0.685 for ECa-V and 0.649 for ECa-H) were higher than those between ECaand clay content (ranging from 0.197 to 0.495, when different ECarecording dates were taken into account). Ordinary and universal kriging have been used to assess the patterns of spatial variability of the ECadata sets recorded at successive dates and the analyzed soil properties. Ordinary and universal cokriging methods have improved the estimation of gravimetric soil water content using the data of ECaas secondary variable with respect to the use of ordinary kriging.


2020 ◽  
Vol 19 (4) ◽  
pp. 507-516
Author(s):  
Le Ngoc Thanh ◽  
Nguyen Quang Dung ◽  
Luu Hai Tung

Assessment of soil and soil-water salinity is essential in agricultural production, therefore it is necessary to find out the non-costly, effective, rapid and reliable integrated methodology for this purpose. The paper presents the results of using the electromagnetic induction instrument EM31-MK2Ô in combination with collecting and analyzing soil and soil-water samples, and applying GIS and geostatistical techniques to assess the current status of soil and soil-water salinity in Ben Tre province. Apparent soil electrical conductivity ECa measured from ground surface to 6 m in depth increases from inland to the sea in northwest - southeast direction; ECa is closely related to topsoil salinity to 30 cm deep and to soil-water salinity at depth of 10–100 cm. Current status of soil and soil-water salinity in 2018 was assessed with a 4-fold increase in information, from 16 km2/data point to 4 km2/data point. Consequently four maps were established, consisting of electrical conductivity ECe and total solube salt TSS distributions of soil; electrical conductivity σw and total dissolved solid TDS distributions of soil-water.


2020 ◽  
Vol 63 (5) ◽  
pp. 1207-1215
Author(s):  
Ruixiu Sui ◽  
Susan A. O’Shaughnessy ◽  
Steven R. Evett ◽  
Alejandro Andrade-Rodriguez ◽  
Jonnie Baggard

HighlightsAn Irrigation Scheduling Supervisory Control and Data Acquisition (ISSCADA) system was tested against a soil electrical conductivity (EC) based method for variable-rate irrigation (VRI).Soil EC was used to create irrigation prescription in EC-based VRI.ISSCADA generated VRI prescriptions using canopy temperature, soil water content, and weather data.ISSCADA-based VRI reduced irrigation water use and increased irrigation water productivity.Abstract. Use of variable-rate irrigation (VRI) technology has the potential to improve irrigation water use efficiency (IWUE). VRI hardware is commercially available and can be implemented in any center pivot or lateral move irrigation system. However, practical methods and algorithms for creating VRI prescriptions have become the bottleneck in accelerating the adoption of VRI. An Irrigation Scheduling Supervisory Control and Data Acquisition (ISSCADA) system for VRI was evaluated for two years in a humid region in the Mississippi Delta. The ISSCADA system was used to manage irrigation of soybeans for two seasons. In field practice, the ISSCADA system scanned the field for canopy temperature and collected soil water data from time domain reflectometers and weather data from a nearby weather station. The ISSCADA system automatically generated VRI prescription maps. The maps were modified to include plots managed using soil electrical conductivity (EC) based VRI prescriptions. Test results indicated that there was no difference in crop yield between EC-based VRI and ISSCADA-based VRI management. However, ISSCADA-based VRI management reduced irrigation water use and increased irrigation water productivity in comparison with EC-based VRI. There is great potential for the use of ISSCADA for VRI in humid regions. Keywords: Canopy temperature, Soil electrical conductivity, Soil moisture sensor, Soil water sensor, Soybean, Variable rate irrigation.


1988 ◽  
Vol 68 (4) ◽  
pp. 715-722 ◽  
Author(s):  
R. G. KACHANOSKI ◽  
I. J. VAN WESENBEECK ◽  
E. G. GREGORICH

The relationships among the spatial variations of soil water content, soil texture, soil solution electrical conductivity, and bulk soil electrical conductivity were examined for a field characterized by net drainage and low concentrations of dissolved electrolytes. Bulk soil electrical conductivity was measured over various depths at 52 locations within a 1.8-ha field using noncontacting electromagnetic inductive meters. Soil water content (0–0.5 m depth) was measured at the same locations using the time domain reflectometry method. Measurements of soil texture and soil solution conductivity were obtained from core samples from 37 of the sampling locations. Soil water content at the site ranged from 0.06 to 0.36 m3 m−3. Clay content ranged from 2.5 to 44% percent and bulk soil electrical conductivity ranged from 0.0 to 0.21 S m−1. Significant correlation existed among almost all of the measured variables. Regression analysis indicated soil solution conductivity had no effect on measured bulk soil electrical conductivity for soil water contents less than 0.25 m3 m−3. Bulk soil electrical conductivity explained 96% of the spatial variation of soil water content independent of a wide range of soil texture. Autocorrelations of soil water content were similar to autocorrelations for bulk soil electrical conductivity. Under conditions similar to those in the study area, it should be possible to infer spatial variations in soil water content quickly by measuring bulk electrical conductivity using noncontacting electromagnetic inductive meters. Key words: Spatial variability, soil water, electrical conductivity, soil texture


Agronomy ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1377
Author(s):  
Jeffrey D. Svedin ◽  
Ruth Kerry ◽  
Neil C. Hansen ◽  
Bryan G. Hopkins

Addressing within-field and within-season variability of crop water stress is critical for spatially variable irrigation. This study measures interactions between spatially variable soil properties and temporally variable crop water dynamics; and whether modelling soil water depletion is an effective approach to guide variable-rate irrigation (VRI). Energy and water balance equations were used to model crop water stress at 85 locations within a 22 ha field of winter wheat (Triticum aestivum L.) under uniform and spatially variable irrigation. Significant within-field variability of soil water holding capacity (SWHC; 145–360 mm 1.2 m−1), soil electrical conductivity (0.22–49 mS m−1), spring soil water (314–471 mm 1.2 m−1), and the onset of crop water stress were observed. Topographic features and modelled onset of crop water stress were significant predictors of crop yield while soil moisture at spring green-up, elevation, and soil electrical conductivity were significant predictors of the onset of crop water stress. These results show that modelling soil water depletion can be an effective scheduling tool in VRI. Irrigation zones and scheduling efforts should consider expanding to include temporally dynamic factors, including spring soil water content and the onset of crop water stress.


Sign in / Sign up

Export Citation Format

Share Document