scholarly journals Optimizing HARQ and Relay Strategies in Limited Feedback Communication Systems

2020 ◽  
Vol 10 (21) ◽  
pp. 7917
Author(s):  
Mai Zhang ◽  
Andres Castillo ◽  
Borja Peleato

One of the key challenges for future communication systems is to deal with fast changing channels due to the mobility of users. Having a robust protocol capable of handling transmission failures in unfavorable channel conditions is crucial, but the feedback capacity may be greatly limited due to strict latency requirements. This paper studies the hybrid automatic repeat request (HARQ) techniques involved in re-transmissions when decoding failures occur at the receiver and proposes a scheme that relies on codeword bundling and adaptive incremental redundancy (IR) to maximize the overall throughput in a limited feedback system. In addition to the traditional codeword extension IR bits, this paper introduces a new type of IR, bundle parity bits, obtained from an erasure code across all the codewords in a bundle. The type and number of IR bits to be sent as a response to a decoding failure is optimized through a Markov Decision Process. In addition to the single link analysis, the paper studies how the same techniques generalize to relay and multi-user broadcast systems. Simulation results show that the proposed schemes can provide a significant increase in throughput over traditional HARQ techniques.

2021 ◽  
Author(s):  
◽  
Ramoni Ojekunle Adeogun

<p>Temporal variation and frequency selectivity of wireless channels constitute a major drawback to the attainment of high gains in capacity and reliability offered by multiple antennas at the transmitter and receiver of a mobile communication system. Limited feedback and adaptive transmission schemes such as adaptive modulation and coding, antenna selection, power allocation and scheduling have the potential to provide the platform of attaining the high transmission rate, capacity and QoS requirements in current and future wireless communication systems. Theses schemes require both the transmitter and receiver to have accurate knowledge of Channel State Information (CSI). In Time Division Duplex (TDD) systems, CSI at the transmitter can be obtained using channel reciprocity. In Frequency Division Duplex (FDD) systems, however, CSI is typically estimated at the receiver and fed back to the transmitter via a low-rate feedback link. Due to the inherent time delays in estimation, processing and feedback, the CSI obtained from the receiver may become outdated before its actual usage at the transmitter. This results in significant performance loss, especially in high mobility environments. There is therefore a need to extrapolate the varying channel into the future, far enough to account for the delay and mitigate the performance degradation. The research in this thesis investigates parametric modeling and prediction of mobile MIMO channels for both narrowband and wideband systems. The focus is on schemes that utilize the additional spatial information offered by multiple sampling of the wave-field in multi-antenna systems to aid channel prediction. The research has led to the development of several algorithms which can be used for long range extrapolation of time-varyingchannels. Based on spatial channel modeling approaches, simple and efficient methods for the extrapolation of narrowband MIMO channels are proposed. Various extensions were also developed. These include methods for wideband channels, transmission using polarized antenna arrays, and mobile-to-mobile systems. Performance bounds on the estimation and prediction error are vital when evaluating channel estimation and prediction schemes. For this purpose, analytical expressions for bound on the estimation and prediction of polarized and non-polarized MIMO channels are derived. Using the vector formulation of the Cramer Rao bound for function of parameters, readily interpretable closed-form expressions for the prediction error bounds were found for cases with Uniform Linear Array (ULA) and Uniform Planar Array (UPA). The derived performance bounds are very simple and so provide insight into system design. The performance of the proposed algorithms was evaluated using standardized channel models. The effects of the temporal variation of multipath parameters on prediction is studied and methods for jointly tracking the channel parameters are developed. The algorithms presented can be utilized to enhance the performance of limited feedback and adaptive MIMO transmission schemes.</p>


2018 ◽  
Vol 73 (5-6) ◽  
pp. 381-390 ◽  
Author(s):  
Berna Özbek ◽  
Özgecan Özdoğan Şenol ◽  
Güneş Karabulut Kurt

Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4772
Author(s):  
Zhifang Wu ◽  
Peili Wu ◽  
Maryna Kudinova ◽  
Hailiang Zhang ◽  
Perry Ping Shum ◽  
...  

Polarization-maintaining fibers (PMFs) have always received great attention in fiber optic communication systems and components which are sensitive to polarization. Moreover, they are widely applied for high-accuracy detection and sensing devices, such as fiber gyroscope, electric/magnetic sensors, multi-parameter sensors, and so on. Here, we demonstrated the combination of a fiber Bragg grating (FBG) and Sagnac interference in the same section of a new type of PANDA-structure PMF for the simultaneous measurement of axial strain and temperature. This specialty PMF features two stress-applied parts made of lanthanum-aluminum co-doped silicate (SiO2-Al2O3-La2O3, SAL) glass, which has a higher thermal expansion coefficient than borosilicate glass used commonly in commercial PMFs. Furthermore, the FBG inscribed in this SAL PMF not only aids the device in discriminating strain and temperature, but also calibrates the phase birefringence of the SAL PMF more precisely thanks to the much narrower bandwidth of grating peaks. By analyzing the variation of wavelength interval between two FBG peaks, the underlying mechanism of the phase birefringence responding to temperature and strain is revealed. It explains exactly the sensing behavior of the SAL PMF based Sagnac interference dip. A numerical simulation on the SAL PMF’s internal stress and consequent modal effective refractive indices was performed to double confirm the calibration of fiber’s phase birefringence.


Energies ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 3439 ◽  
Author(s):  
Haiyan Zhang ◽  
Minfang Peng ◽  
Josep M. Guerrero ◽  
Xingle Gao ◽  
Yanchen Liu

The strong coupling between the power grid and communication systems may contribute to failure propagation, which may easily lead to cascading failures or blackouts. In this paper, in order to quantitatively analyse the impact of interdependency on power system vulnerability, we put forward a “degree–electrical degree” independent model of cyber-physical power systems (CPPS), a new type of assortative link, through identifying the important nodes in a power grid based on the proposed index–electrical degree, and coupling them with the nodes in a communication system with a high degree, based on one-to-one correspondence. Using the double-star communication system and the IEEE 118-bus power grid to form an artificial interdependent network, we evaluated and compare the holistic vulnerability of CPPS under random attack and malicious attack, separately based on three kinds of interdependent models: “degree–betweenness”, “degree–electrical degree” and “random link”. The simulation results demonstrated that different link patterns, coupling degrees and attack types all can influence the vulnerability of CPPS. The CPPS with a “degree–electrical degree” interdependent model proposed in this paper presented a higher robustness in the face of random attack, and moreover performed better than the degree–betweenness interdependent model in the face of malicious attack.


1993 ◽  
Vol 25 (04) ◽  
pp. 979-996
Author(s):  
Arie Hordijk ◽  
Ger Koole

In this paper we study scheduling problems of multiclass customers on identical parallel processors. A new type of arrival process, called a Markov decision arrival process, is introduced. This arrival process can be controlled and allows for an indirect dependence on the numbers of customers in the queues. As a special case we show the optimality of LEPT and the µc-rule in the last node of a controlled tandem network for various cost structures. A unifying proof using dynamic programming is given.


2013 ◽  
Vol 2013 ◽  
pp. 1-19 ◽  
Author(s):  
Xinxing Yin ◽  
Xiao Chen ◽  
Zhi Xue

We introduce the wiretap channel with action-dependent states and rate-limited feedback. In the new model, the state sequence is dependent on the action sequence which is selected according to the message, and a secure rate-limited feedback link is shared between the transmitter and the receiver. We obtain the capacity-equivocation region and secrecy capacity of such a channel both for the case where the channel inputs depend noncausally on the state sequence and the case where they are restricted to causal dependence. We construct the capacity-achieving coding schemes utilizing Wyner's random binning, Gel'fand and Pinsker’s coding technique, and rate splitting. Furthermore, we compare our results with the existing approaches without feedback, with noiseless feedback, and without action-dependent states. The simulation results show that the secrecy capacity of our model is bigger than that of the first two existed approaches. Besides, it is also shown that, by taking actions to affect the channel states, we guarantee the data integrity of the message transmitted in the two-stage communication systems although the tolerable overhead of transmission time is brought.


Sign in / Sign up

Export Citation Format

Share Document