scholarly journals Technological Perspective of Cyber Secure Smart Inverters Used in Power Distribution System: State of the Art Review

2021 ◽  
Vol 11 (18) ◽  
pp. 8780
Author(s):  
Sumukh Surya ◽  
Mohan Krishna Srinivasan ◽  
Sheldon Williamson
Keyword(s):  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Renewable Energy Sources ◽  
Cyber Attacks ◽  
Critical Examination ◽  
Power Distribution System ◽  
Safety Issues ◽  
Smart Inverters ◽  
Technological Perspective

The purpose of smart grid architecture as compared to the conventional grid is to ensure more stability, reliability and bi-directional communication between the utility and the consumer. The deployment of the same has succeeded in improving the efficiency of the distribution systems and effective co-ordination and interoperability among the different components of the grid. Smart inverters play a major role in seamless grid integration, control and conversion of power when the renewable energy sources are present. However, they come with several security challenges as well, which are of considerable concern. Certain cyber threats include physical and cyber attacks, natural phenomena which in turn can lead to grid failure, blackouts, commercial energy losses, privacy and safety issues, etc. Therefore, there is a need for critical examination of all these issues which must be considered for designing cyber secure smart inverters at the distribution level. In this comprehensive review, keeping the technological perspective in mind, the existing gaps and the necessity for the same are highlighted. The various topologies, IEEE protocols and the control strategy are presented in detail. This will enable prospective researchers to address the design issues of smart inverters with greater focus on security and reliability aspects.

scholarly journals Development of an Integrated Power Distribution System Laboratory Platform Using Modular Miniature Physical Elements: A Case Study of Fault Location

Energies ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3780 ◽  
Author(s):  
Jinrui Tang ◽  
Binyu Xiong ◽  
Chen Yang ◽  
Cuilan Tang ◽  
Yang Li ◽  
...  
Keyword(s):  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Fault Location ◽  
Renewable Energy Sources ◽  
Distribution Networks ◽  
Power Distribution System ◽  
Zero Sequence ◽  
Assembly Technology ◽  
Physical Elements

The main shortcomings of the software-based power engineering education are a lack of physical understanding of phenomena and hands-on experience. Existing scaled-down analogous educational power system platforms cannot be widely used for experiments in universities due to the high cost, complicated operation, and huge size. An integrated power distribution system laboratory platform (PDSLP) using modular miniature physical elements is proposed in this paper. The printed circuit board (PCB) and microelectronic technology are proposed to construct each physical element. Furthermore, the constructed physical elements are used to set up an integrated PDSLP based on modular assembly technology. The size of the proposed cost-efficient PDSLP is significantly reduced, and the reliability of the proposed PDSLP can be improved greatly because the signal transmission path is shortened and a number of welding points are reduced. A PDSLP for fault location in neutral non-effectively grounded distribution systems (NGDSs) is selected as a typical experimental scenario and one scaled-down distribution network with three feeders is subsequently implemented and discussed. The measured zero-sequence currents by our proposed PDSLP when a single-phase earth fault occurred can reveal the true features of the fault-generated signals, including steady-state and transient characteristics of zero-sequence currents. They can be readily observed and used for students to design corresponding fault location algorithms. Modular renewable energy sources and other elements can be designed, implemented and integrated into the proposed platform for the laboratory education of the active distribution networks in the future.

scholarly journals Simulation Study of Power Management for a Highly Reliable Distribution System using a Triple Active Bridge Converter in a DC Microgrid

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 3178 ◽  
Author(s):  
Yue Yu ◽  
Keiji Wada
Keyword(s):  
Power Management ◽  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Data Centers ◽  
High Reliability ◽  
Renewable Energy Sources ◽  
Management Approach ◽  
Dc Microgrid ◽  
Power Distribution System

Owing to the acute energy shortage issue and the increasing energy demands of information and communication technology systems worldwide, the development of a DC microgrid that can utilize renewable energy sources, such as wind and photovoltaic power, has been accelerated. Therefore, power management for DC microgrid distributed systems is promoted to achieve high reliability and efficiency in power distribution systems. For industry and power transmission applications such as data centers, power management with the help of DC converters is highly recommended. In this paper, we propose a prototype of a power distribution system with a triple active bridge (TAB) converter for data centers in the DC microgrid. Moreover, we introduce a power management approach for a distribution system using the TAB converter. Finally, we perform simulations of the proposed configuration to verify the controllability of the circuit performance and the high reliability of the system.

scholarly journals Complete power distribution system representation and state determination for fault location

DYNA ◽  
2015 ◽  
Vol 82 (192) ◽  
pp. 141-149 ◽  
Author(s):  
Andres Felipe Panesso-Hernández ◽  
Juan Mora-Flórez ◽  
Sandra Pérez-Londoño
Keyword(s):  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Fault Location ◽  
Estimation Error ◽  
Distance Estimation ◽  
Power Distribution Systems ◽  
Line Load ◽  
Power Distribution System ◽  
Line Section

<p>The impedance-based approaches for fault location in power distribution systems determine a faulted line section. Next, these require of the estimation of the voltages and currents at one or both section line ends to exactly determine the fault location. It is a challenge because in most of the power distribution systems, measurements are only available at the main substation.  This document presents a modeling proposal of the power distribution system and an easy implementation method to estimate the voltages and currents at the faulted line section, using the measurements at the main substation, the line, load, transformer parameters and other serial and shunt connected devices and the power system topology. The approach here proposed is tested using a fault locator based on superimposed components, where the distance estimation error is lower than 1.5% in all of the cases. </p>

scholarly journals Active Reduction of Short-Circuit Current in Power Distribution Systems

Energies ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 334
Author(s):  
Esteban Pulido ◽  
Luis Morán ◽  
Felipe Villarroel ◽  
José Silva
Keyword(s):  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Short Circuit ◽  
Circuit Breaker ◽  
Short Circuit Current ◽  
Power Converter ◽  
Power Distribution Systems ◽  
Power Distribution System ◽  
In Series

In this paper, a new concept of short-circuit current (SCC) reduction for power distribution systems is presented and analyzed. Conventional fault current limiters (FCLs) are connected in series with a circuit breaker (CB) that is required to limit the short-circuit current. Instead, the proposed scheme consisted of the parallel connection of a current-controlled power converter to the same bus intended to reduce the amplitude of the short-circuit current. This power converter was controlled to absorb a percentage of the short-circuit current from the bus to reduce the amplitude of the short-circuit current. The proposed active short-circuit current reduction scheme was implemented with a cascaded H-bridge power converter and tested by simulation in a 13.2 kV industrial power distribution system for three-phase faults, showing the effectiveness of the short-circuit current attenuation in reducing the maximum current requirement in all circuit breakers connected to the same bus. The paper also presents the design characteristics of the power converter and its associated control scheme.

scholarly journals Flexibility Enhancement in an Islanded Distribution Power System by Online Demand-Side Management

2019 ◽  
Vol 217 ◽  
pp. 01020 ◽  
Author(s):  
Margarita Chulyukova ◽  
Nikolai Voropai
Keyword(s):  
Power System ◽  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Load Shedding ◽  
Load Management ◽  
Daily Maximum ◽  
Power Distribution Systems ◽  
Power Distribution System ◽  
Islanded Operation

The paper considers the possibilities of increasing the flexibility of power distribution systems by real-time load management. The principles of the implementation of special automatic systems for this purpose are proposed. These systems enable some loads of specific consumers of the power distribution system switched to islanded operation to “shift” from the daily maximum to the minimum, which makes some generators available to connect certain essential consumers disconnected earlier by under-frequency load shedding system to the power system. The approach under consideration is illustrated by a power system with distributed generation.

scholarly journals Islanding Detection in Rural Distribution Systems

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5503
Author(s):  
Wen Fan ◽  
Ning Kang ◽  
Robert Hebner ◽  
Xianyong Feng
Keyword(s):  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Islanding Detection ◽  
Distribution Grid ◽  
Power Distribution System ◽  
University Of Texas ◽  
Intelligent Sensors ◽  
Detection Approach ◽  
The University

This paper summarizes the literature on detection of islanding resulting from distributed generating capabilities in a power distribution system, with emphasis on the rural distribution systems. It is important to understand the legacy technology and equipment in the rural distribution electrical environment due to the growth of power electronics and the potential for adding the new generations of intelligent sensors. The survey identified four areas needing further research: 1. Robustness in the presence of distribution grid disturbances; 2. the future role of artificial intelligence in the islanding application; 3. more realistic standard tests for the emerging electrical environment; 4. smarter sensors. In addition, this paper presents a synchro-phasor-based islanding detection approach based on a wireless sensor network developed by the University of Texas at Austin. Initial test results in a control hardware-in-the-loop (CHIL) simulation environment suggest the effectiveness of the developed method.

Shunt Petersen-Coil with Resistor for Single Phase Fault Detection in Resonant Grounded Power Distribution Systems

2013 ◽  
Vol 860-863 ◽  
pp. 2007-2012 ◽  
Author(s):  
Xiao Meng ◽  
Neng Ling Tai ◽  
Yan Hu ◽  
Xia Yang
Keyword(s):  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Single Phase ◽  
Detection Sensitivity ◽  
Power Distribution Systems ◽  
Power Distribution System ◽  
Multi Level ◽  
The Difference ◽  
Petersen Coil

The failure current in resonant grounder power distribution system is small, so it is difficult to detect the fault feeder. This passage presents the equivalent circuit of resonant grounded system, and discusses the difference of electrical characteristics between faulty feeder and sound feeders by using shunt resistors. To reduce the influence of shunt resistors on the system and improve the detection sensitivity, it presents the method of shunting multi-level resistors, and it proves the sensitivity and reliability of this method by EMTP simulation.

Planning of Distribution System with High Penetration Level for Distributed Generation in Smart Grid

2018 ◽  
Vol 8 (3) ◽  
Author(s):  
Reza Tajik
Keyword(s):  
Smart Grid ◽  
Power Systems ◽  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Distribution Networks ◽  
Planning Problem ◽  
Renewable Energy Resources ◽  
Power Distribution System ◽  
High Penetration

Nowadays, the utilization of renewable energy resources in distribution systems (DSs) has been rapidly increased. Since distribution generation (DG) use renewable resources (i.e., biomass, wind and solar) are emerging as proper solutions for electricity generation. Regarding the tremendous deployment of DG, common distribution networks are undergoing a transition to DSs, and the common planning methods have become traditional in the high penetration level. Indeed, in conformity with the voltage violation challenge of these resources, this problem must be dealt with too. So, due to the high penetration of DG resources and nonlinear nature of most industrial loads, the planning of DG installation has become an important issue in power systems. The goal of this paper is to determine the planning of DG in distribution systems through smart grid to minimize losses and control grid factors. In this regard, the present work intending to propose a suitable method for the planning of DSs, the key properties of DS planning problem are evaluated from the various aspects, such as the allocation of DGs, and planning, and high-level uncertainties. Also depending on these analyses, this universal literature review addressed the updated study associated with DS planning. In this work, an operational design has been prepared for a higher performance of the power distribution system in the presence of DG. Artificial neural network (ANN) has been used as a method for voltage monitoring and generation output optimization. The findings of the study show that the proposed method can be utilized as a technique to improve the process of the distribution system under various penetration levels and in the presence of DG. Also, the findings revealed that the optimal use of ANN method leads to more controllable and apparent DS.

scholarly journals An Encoding Technique for Multiobjective Evolutionary Algorithms Applied to Power Distribution System Reconfiguration

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
J. L. Guardado ◽  
F. Rivas-Davalos ◽  
J. Torres ◽  
S. Maximov ◽  
E. Melgoza
Keyword(s):  
Evolutionary Algorithms ◽  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Pareto Optimal ◽  
Pareto Optimal Solutions ◽  
Optimal Solutions ◽  
Power Distribution Systems ◽  
Encoding Scheme ◽  
Power Distribution System

Network reconfiguration is an alternative to reduce power losses and optimize the operation of power distribution systems. In this paper, an encoding scheme for evolutionary algorithms is proposed in order to search efficiently for the Pareto-optimal solutions during the reconfiguration of power distribution systems considering multiobjective optimization. The encoding scheme is based on the edge window decoder (EWD) technique, which was embedded in the Strength Pareto Evolutionary Algorithm 2 (SPEA2) and the Nondominated Sorting Genetic Algorithm II (NSGA-II). The effectiveness of the encoding scheme was proved by solving a test problem for which the true Pareto-optimal solutions are known in advance. In order to prove the practicability of the encoding scheme, a real distribution system was used to find the near Pareto-optimal solutions for different objective functions to optimize.

Sign in / Sign up

Export Citation Format

Share Document