scholarly journals A Temperature-Dependent Heat Source for Simulating Deep Penetration in Selective Laser Melting Process

2021 ◽  
Vol 11 (23) ◽  
pp. 11406
Author(s):  
Yabo Jia ◽  
Yassine Saadlaoui ◽  
Jean-Michel Bergheau
Keyword(s):  
Fluid Flow ◽  
Heat Source ◽  
Selective Laser Melting ◽  
Powder Layer ◽  
Deep Penetration ◽  
Model Parameters ◽  
Conductivity Method ◽  
Temperature Dependent ◽  
Laser Melting ◽  
Anisotropic Thermal Conductivity

Numerical methods for simulating selective laser melting (SLM) have been widely carried out to understand the physical behaviors behind the process. Numerical simulation at the macroscale allows the relationship between input parameters (laser power, scanning speed, powder layer thickness, etc.) and output results (distortion, residual stress, etc.) to be investigated. However, the macroscale thermal models solved by the finite element method cannot predict the melt pool depth correctly as they ignore the effect of fluid flow in the melting pool, especially in the case of the presence of deep penetration. To remedy this limitation, an easy-implemented temperature-dependent heat source is proposed. This heat source can adjust its parameters during the simulation to compensate for these neglected thermal effects related to the fluid flow and keyhole, and the heat source’s parameters become fixed once the temperatures of the points of interest become stable. Contrary to the conventional heat source model, parameters of the proposed heat source do not require a calibration with experiments for each process parameter. The proposed model is validated by comparing its results with those of the anisotropic thermal conductivity method and experimental measurements.

scholarly journals Computational investigation of thermal behavior and molten metal flow with moving laser heat source for selective laser melting process

2021 ◽  
Vol 24 ◽  
pp. 100860
Author(s):  
Patiparn Ninpetch ◽  
Pruet Kowitwarangkul ◽  
Sitthipong Mahathanabodee ◽  
Prasert Chalermkarnnon ◽  
Phadungsak Rattanadecho
Keyword(s):  
Heat Source ◽  
Thermal Behavior ◽  
Selective Laser Melting ◽  
Molten Metal ◽  
Metal Flow ◽  
Melting Process ◽  
Computational Investigation ◽  
Laser Melting ◽  
Laser Heat Source ◽  
Molten Metal Flow

A Comparative Study Between Selective Laser Melting and Electron Beam Additive Manufacturing Based on Thermal Modeling

2018 ◽  
Author(s):  
M. Shafiqur Rahman ◽  
Paul J. Schilling ◽  
Paul D. Herrington ◽  
Uttam K. Chakravarty
Keyword(s):  
Electron Beam ◽  
Additive Manufacturing ◽  
Heat Source ◽  
Selective Laser Melting ◽  
Thermal Modeling ◽  
Maximum Temperature ◽  
Full Density ◽  
Rate Variation ◽  
Laser Melting ◽  
Melt Pool

Selective Laser Melting (SLM) and Electron Beam Additive Manufacturing (EBAM) are two of the most promising additive manufacturing technologies that can make full density metallic components using layer-by-layer fabrication methods. In this study, three-dimensional computational fluid dynamics models with Ti-6Al-4V powder were developed to conduct numerical simulations of both the SLM and EBAM processes. A moving conical volumetric heat source with Gaussian distribution and temperature-dependent thermal properties were incorporated in the thermal modeling of both processes. The melt-pool geometry and its thermal behavior were investigated numerically and results for temperature profile, cooling rate, variation in specific heat, density, thermal conductivity, and enthalpy were obtained with similar heat source specifications. Results obtained from the two models at the same maximum temperature of the melt pool were then compared to describe their deterministic features to be considered for industrial applications. Validation of the modeling was performed by comparing the EBAM simulation results with the EBAM experimental results for melt pool geometry.

Single Track Formation during Selective Laser Melting of Ti-6Al-4V Alloy

2019 ◽  
Vol 946 ◽  
pp. 978-983 ◽  
Author(s):  
R.M. Baitimerov
Keyword(s):  
Selective Laser Melting ◽  
Process Parameters ◽  
Complex Shape ◽  
Powder Layer ◽  
Single Track ◽  
Laser Melting ◽  
Additive Manufacturing Technology ◽  
Geometrical Characteristics ◽  
Track Formation ◽  
Point Distance

Selective laser melting (SLM) is an additive manufacturing technology that allows to produce functional parts with extremely complex shape from metal powder feedstock. 240 single tracks with the length of 10 mm were fabricated using different SLM process parameters: laser power output, powder layer thickness, point distance and exposure time. Obtained single tracks were measured using optical microscopy. An influence of SLM process parameters on geometrical characteristics of obtained single tracks was investigated.

scholarly journals Phase Change with Density Variation and Cylindrical Symmetry: Application to Selective Laser Melting

2019 ◽  
Vol 3 (3) ◽  
pp. 62 ◽  
Author(s):  
Fyrillas ◽  
Ioannou ◽  
Papadakis ◽  
Rebholz ◽  
Doumanidis
Keyword(s):  
Heat Transfer ◽  
Heat Source ◽  
Phase Change ◽  
Selective Laser Melting ◽  
Unit Length ◽  
Cylindrical Symmetry ◽  
Density Variation ◽  
Laser Melting ◽  
Molten Material ◽  
Melt Pool

In this paper we introduce an analytical approach for predicting the melting radius during powder melting in selective laser melting (SLM) with minimum computation duration. The purpose of this work is to evaluate the suggested analytical expression in determining the melt pool geometry for SLM processes, by considering heat transfer and phase change effects with density variation and cylindrical symmetry. This allows for rendering first findings of the melt pool numerical prediction during SLM using a quasi-real-time calculation, which will contribute significantly in the process design and control, especially when applying novel powders. We consider the heat transfer problem associated with a heat source of power Q' (W/m) per unit length, activated along the span of a semi-infinite fusible material. As soon as the line heat source is activated, melting commences along the line of the heat source and propagates cylindrically outwards. The temperature field is also cylindrically symmetric. At small times (i.e., neglecting gravity and Marangoni effects), when the density of the solid material is less than that of the molten material (i.e., in the case of metallic powders), an annulus is created of which the outer interface separates the molten material from the solid. In this work we include the effect of convection on the melting process, which is shown to be relatively important. We also justify that the assumption of constant but different properties between the two material phases (liquid and solid) does not introduce significant errors in the calculations. A more important result; however, is that, if we assume constant energy input per unit length, there is an optimum power of the heat source that would result to a maximum amount of molten material when the heat source is deactivated. The model described above can be suitably applied in the case of selective laser melting (SLM) when one considers the heat energy transferred to the metallic powder bed during scanning. Using a characteristic time and length for the process, we can model the energy transfer by the laser as a heat source per unit length. The model was applied in a set of five experimental data, and it was demonstrated that it has the potential to quantitatively describe the SLM process.

scholarly journals Numerical Simulation of Moving Heat Flux during Selective Laser Melting of AlSi25 Alloy Powder

Metals ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 877
Author(s):  
Cong Ma ◽  
Xianshun Wei ◽  
Biao Yan ◽  
Pengfei Yan
Keyword(s):  
Numerical Simulation ◽  
Selective Laser Melting ◽  
Process Parameters ◽  
Molten Pool ◽  
Laser Power ◽  
Scanning Speed ◽  
Powder Layer ◽  
Maximum Temperature ◽  
Three Dimensional Model ◽  
Laser Melting

A single-layer three-dimensional model was created to simulate multi-channel scanning of AlSi25 powder in selective laser melting (SLM) by the finite element method. Thermal behaviors of laser power and scanning speed in the procedure of SLM AlSi25 powder were studied. With the increase of laser power, the maximum temperature, size and cooling rate of the molten pool increase, while the scanning speed decreases. For an expected SLM process, a perfect molten pool can be generated using process parameters of laser power of 180 W and a scanning speed of 200 mm/s. The pool is greater than the width of the scanning interval, the depth of the molten pool is close to scan powder layer thickness, the temperature of the molten pool is higher than the melting point temperature of the powder and the parameters of the width and depth are the highest. To confirm the accuracy of the simulation results of forecasting excellent process parameters, the SLM experiment of forming AlSi25 powder was carried out. The surface morphology of the printed sample is intact without holes and defects, and a satisfactory metallurgical bond between adjacent scanning channels and adjacent scanning layers was achieved. Therefore, the development of numerical simulation in this paper provides an effective method to obtain the best process parameters, which can be used as a choice to further improve SLM process parameters. In the future, metallographic technology can also be implemented to obtain the width-to-depth ratio of the SLM sample molten pool, enhancing the connection between experiment and theory.

Sign in / Sign up

Export Citation Format

Share Document