scholarly journals An Adaptive Neural Non-Singular Fast-Terminal Sliding-Mode Control for Industrial Robotic Manipulators

2018 ◽  
Vol 8 (12) ◽  
pp. 2562 ◽  
Author(s):  
Anh Tuan Vo ◽  
Hee-Jun Kang

In this study, a robust control strategy is suggested for industrial robotic manipulators. First, to minimize the effects of disturbances and dynamic uncertainties, while achieving faster response times and removing the singularity problem, a nonsingular fast terminal sliding function is proposed. Second, to achieve the proposed tracking trajectory and chattering phenomenon elimination, a robust control strategy is designed for the robotic manipulator based on the proposed sliding function and a continuous adaptive control law. Furthermore, the dynamical model of the robotic system is estimated by applying a radial basis function neural network. Thanks to those techniques, the proposed system can operate free of an exact robotic model. The suggested system provides high tracking accuracy, robustness, and fast response with minimal positional errors compared to other control strategies. Proof of the robustness and stability of the suggested system has been verified by the Lyapunov theory. In simulation analyses, the simulated results present the effectiveness of the suggested strategy for the joint position tracking control of a 3-degree of freedom (3-DOF) PUMA560 robot.

2018 ◽  
Vol 10 (6) ◽  
pp. 168781401878128 ◽  
Author(s):  
Chongzhen Cao ◽  
Fengqin Wang ◽  
Qianlei Cao ◽  
Hui Sun ◽  
Wei Xu ◽  
...  

This study considers the control problem of constrained robotic manipulators with dynamic uncertainties. A new force/position control strategy is proposed based upon terminal sliding mode and neural network. The terminal sliding mode combines position tracking with velocity tracking, and the neural network estimates unknown dynamics. Then, an adaptive control law is utilized to ensure finite-time convergent performance of position tracking and boundedness of contacting force tracking. Compared with existing force/position control strategies, the proposed strategy ensures the convergent performance without nominal model of the system dynamics. Simulation analysis verifies that the proposed strategy is effective.


2013 ◽  
Vol 273 ◽  
pp. 280-285 ◽  
Author(s):  
Hong Pei Han ◽  
Wu Wang ◽  
Zheng Min Bai

Permanent Magnet Linear Synchronous Motor (P MLSM was hard to control with traditional control strategy for parameters variation and external load disturbance, a global robust terminal sliding mode control (GRTSMC) was designed for PMLSM servo system, the sliding mode surface function was designed, the robust sliding mode control law was deduced and the stability was proved by Lyapunov theory. With the mathematical models of PMLSM, the simulation was taken with traditional PID control, SMC control and GRTSMC control proposed in this paper, the robust performance be found with GRTSMC control when motor parameters and external load changed, the efficiency and advantages of this robust control strategy was successfully demonstrated.


Machines ◽  
2022 ◽  
Vol 10 (1) ◽  
pp. 34
Author(s):  
Aydin Azizi ◽  
Hamed Mobki ◽  
Hassen M. Ouakad ◽  
Omid Reza B. Speily

This investigation attempts to study a possible controller in improving the dynamic stability of capacitive microstructures through mitigating the effects of disturbances and uncertainties in their resultant dynamic behavior. Consequently, a nonsingular terminal sliding mode control strategy is suggested in this regard. The main features of this particular control strategy are its high response speed and its non-reliance on powerful controller forces. The stability of the controller was investigated using Lyapunov theory. For this purpose, a suitable Lyapunov function was introduced to prove the stability of a controller, and the singularity conditions and methods to overcome these conditions are presented. The achieved results proved the high capability of the applied technique in stabilizing of the microstructure as well as mitigating the effects of disturbances and uncertainties.


2021 ◽  
Author(s):  
Chenguang Liu ◽  
Wei Wang ◽  
Junjie Kang ◽  
Zheng H. Zhu

Abstract This paper studies the deployment control of a spinning hub-spoke tethered satellite formation, which is a challenging issue due to the strong nonlinear coupling between the hub and sub-satellites, and the underactuated nature of the system if no thrust is used for control. The mathematical model of the formation system is established based on the assumption of rigid body of the hub, inextensible tether, and lumped masses of the sub-satellites. Two novel formation deployment controllers are proposed based on tension control and hybrid tension-thrust control strategies, where underactuated sliding mode control and nonsingular terminal sliding mode control method are used, respectively. The adaptive control theory is adopted to estimate the unknown upper bound of the gravitational perturbation caused by the rotation of the system around the hub. It can be proven by the Lyapunov theory that the close-loop systems have bounded and asymptotic stability under these two deployment controllers, respectively. Finally, numerical simulations are conducted to validate the effectiveness and robustness of the proposed controllers.


Author(s):  
Dalong Tian ◽  
Jianguo Guo

This study aims to develop an advanced integral terminal sliding-mode robust control method using a disturbance observer (DO) to suppress the forced vibration of a large space intelligent truss structure (LSITS). First, the dynamics of the electromechanical coupling of the piezoelectric stack actuator and the LSITS, based on finite element and Lagrangian methods, are established. Subsequently, to constrict the vibration of the structure, a novel integral terminal sliding-mode control (ITSMC) law for the DO is used to estimate the parameter perturbation of the LSITS based on a continuous external disturbance. Simulation results show that, under a forced vibration and compared with the ITSMC system without a DO, the displacement amplitude of the ITSMC system with the DO is effectively reduced. In the case where the model parameters of the LSITS deviate by ±50%, and an unknown continuous external disturbance exists, the control system with the DO can adequately attenuate the structural vibration and realize robust control. Concurrently, the voltage of the employed piezoelectric stack actuator is reduced, and voltage jitter is alleviated.


2020 ◽  
pp. 107754632098244
Author(s):  
Hamid Razmjooei ◽  
Mohammad Hossein Shafiei ◽  
Elahe Abdi ◽  
Chenguang Yang

In this article, an innovative technique to design a robust finite-time state feedback controller for a class of uncertain robotic manipulators is proposed. This controller aims to converge the state variables of the system to a small bound around the origin in a finite time. The main innovation of this article is transforming the model of an uncertain robotic manipulator into a new time-varying form to achieve the finite-time boundedness criteria using asymptotic stability methods. First, based on prior knowledge about the upper bound of uncertainties and disturbances, an innovative finite-time sliding mode controller is designed. Then, the innovative finite-time sliding mode controller is developed for finite-time tracking of time-varying reference signals by the outputs of the system. Finally, the efficiency of the proposed control laws is illustrated for serial robotic manipulators with any number of links through numerical simulations, and it is compared with the nonsingular terminal sliding mode control method as one of the most powerful finite-time techniques.


Automatica ◽  
2005 ◽  
Vol 41 (11) ◽  
pp. 1957-1964 ◽  
Author(s):  
Shuanghe Yu ◽  
Xinghuo Yu ◽  
Bijan Shirinzadeh ◽  
Zhihong Man

Sign in / Sign up

Export Citation Format

Share Document