scholarly journals Optimized Technologies for Cointegration of MOS Transistor and Glucose Oxidase Enzyme on a Si-Wafer

Biosensors ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 497
Author(s):  
Cristian Ravariu ◽  
Catalin Corneliu Parvulescu ◽  
Elena Manea ◽  
Vasilica Tucureanu

The biosensors that work with field effect transistors as transducers and enzymes as bio-receptors are called ENFET devices. In the actual paper, a traditional MOS-FET transistor is cointegrated with a glucose oxidase enzyme, offering a glucose biosensor. The manufacturing process of the proposed ENFET is optimized in the second iteration. Above the MOS gate oxide, the enzymatic bioreceptor as the glucose oxidase is entrapped onto the nano-structured TiO2 compound. This paper proposes multiple details for cointegration between MOS devices with enzymatic biosensors. The Ti conversion into a nanostructured layer occurs by anodization. Two cross-linkers are experimentally studied for a better enzyme immobilization. The final part of the paper combines experimental data with analytical models and extracts the calibration curve of this ENFET transistor, prescribing at the same time a design methodology.

1990 ◽  
Vol 182 ◽  
Author(s):  
S. F. Gong ◽  
H. T. G. Hentzell ◽  
A. Robertsson

AbstractSolid phase doping from Sb heavily-doped Si films has been studied by using transmission electron microscopy and secondary ion mass spectroscopy. Based on the results of the material study, metal-oxidesemiconductor field effect transistors (MOSFETs) made on a (100) Si wafer, and thin film transistors have been implemented. The technique for the MOSFETs suggests the possibility for making small dimensional and high speed integrated circuits by using the method of solid phase doping.


Author(s):  
Hsiu-Ching Chen ◽  
Yuan-Hwei Cheng ◽  
Jin-Siang Shaw ◽  
Win-Der Lee ◽  
Kun-Fong Lin ◽  
...  

This study investigates the effect of dispensing glucose oxidase enzyme onto the reaction zone of a golden electrode via a jetting dispenser. Each droplet of enzyme solution dispensed onto the reaction zone of golden electrode weighs exactly the same at around 0.4 mg. This study shows that the spring and needle assembly can be controlled by adjusting the stroke value of the stroke adjustment knob to generate different jet dispensing effects, thus affecting the change of droplets of glucose oxidase enzyme solution within the reaction zone of the golden electrode. This study performs experiments using three stroke values, which are 0.8, 1.2, and 1.6 mm. The experimental results show that adjusting the stroke value to change the droplet of the dispensing liquid will significantly affect the accuracy of the test strip reading value. When the stroke value is adjusted to 1.5 mm, the standard deviation of the test strip is 3.8 mg/dL and the coefficient of variation is 4.1%–6.1%. The study suggested that adjusting the stroke value can stabilize the dispensed droplet to increase the stability of test strip reading, improving the accuracy of the test strip reading. This adjustment method can also be applied to the process of other biochemical sensors.


The Analyst ◽  
2019 ◽  
Vol 144 (6) ◽  
pp. 1960-1967 ◽  
Author(s):  
Chao Chen ◽  
Pengcheng Zhao ◽  
Meijun Ni ◽  
Chunyan Li ◽  
Yixi Xie ◽  
...  

A temperature-induced sensing film consisting of poly(N-vinylcaprolactam) (PVCL), graphene oxide (GO) and glucose oxidase (GOD) was fabricated and used to modify a glassy carbon electrode (GCE).


Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3757
Author(s):  
Gabriela Valdés-Ramírez ◽  
Laura Galicia

A biosensing membrane base on ferulic acid and glucose oxidase is synthesized onto a carbon paste electrode by electropolymerization via cyclic voltammetry in aqueous media at neutral pH at a single step. The developed biosensors exhibit a linear response from 0.082 to 34 mM glucose concentration, with a coefficient of determination R2 equal to 0.997. The biosensors display a sensitivity of 1.1 μAmM−1 cm−2, a detection limit of 0.025 mM, and 0.082 mM as glucose quantification limit. The studies reveal stable, repeatable, and reproducible biosensors response. The results indicate that the novel poly-ferulic acid membrane synthesized by electropolymerization is a promising method for glucose oxidase immobilization towards the development of glucose biosensors. The developed glucose biosensors exhibit a broader linear glucose response than other polymer-based glucose biosensors.


2011 ◽  
Vol 152 (1) ◽  
pp. 49-55 ◽  
Author(s):  
Baozhan Zheng ◽  
Shunping Xie ◽  
Lei Qian ◽  
Hongyan Yuan ◽  
Dan Xiao ◽  
...  

2005 ◽  
Vol 23 (3) ◽  
pp. 275-279 ◽  
Author(s):  
Yao Hui ◽  
Li Nan ◽  
Xu Jing-Zhong ◽  
Zhu Jun-Jie

Sign in / Sign up

Export Citation Format

Share Document