scholarly journals Stochastic Dynamic Analysis of Cultural Heritage Towers up to Collapse

Buildings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 296
Author(s):  
Emmanouil-Georgios S. Kouris ◽  
Leonidas-Alexandros S. Kouris ◽  
Avraam A. Konstantinidis ◽  
Stavros K. Kourkoulis ◽  
Chris G. Karayannis ◽  
...  
Keyword(s):  
Cultural Heritage ◽  
Seismic Response ◽  
Seismic Vulnerability ◽  
Limit State ◽  
Collapse Mechanism ◽  
Ultimate Limit State ◽  
Stochastic Dynamic ◽  
Damage State ◽  
Limit States ◽  
Capacity Curves

This paper deals with the seismic vulnerability of monumental unreinforced masonry (URM) towers, the fragility of which has not yet been sufficiently studied. Thus, the present paper fills this gap by developing models to investigate the seismic response of URM towers up to collapse. On mount Athos, Greece, there exist more than a hundred medieval towers, having served mainly as campaniles or fortifications. Eight representative towers were selected for a thorough investigation to estimate their seismic response characteristics. Their history and architectural features are initially discussed and a two-step analysis follows: (i) limit analysis is performed to estimate the collapse mechanism and the locations of critical cracks, (ii) non-linear explicit dynamic analyses are then carried out, developing finite element (FE) simulations, with cracks modelled as interfacial surfaces to derive the capacity curves. A meaningful definition of the damage states is proposed based on the characteristics of their capacity curves, with the ultimate limit state related to collapse. The onset of slight damage-state is characterised by the formation and development of cracks responsible for the collapse mechanism of the structure. Apart from these two, another two additional limit states are also specified: the moderate damage-state and the extensive one. Fragility and vulnerability curves are finally generated which can help the assessment and preservation of cultural heritage URM towers.

Seismic Vulnerability of Existing RC Buildings and Influence of the Decoupling of the Effective Masonry Panels from the Structural Frames

2012 ◽  
Vol 268-270 ◽  
pp. 646-655
Author(s):  
Fabio de Angelis ◽  
Donato Cancellara
Keyword(s):  
Reinforced Concrete ◽  
Seismic Vulnerability ◽  
Seismic Analysis ◽  
Effective Interaction ◽  
Collapse Mechanism ◽  
Limit States ◽  
Capacity Curves ◽  
Masonry Infills ◽  
N2 Method ◽  
Structural Frame

In the present work we discuss on the seismic vulnerability of reinforced concrete existing buildings. In particular we consider a reinforced concrete building originally designed for only gravitational loads and located in a zone recently defined at seismic risk. According to the Italian seismic code NTC 2008 a displacement based approach is adopted and the N2-method is considered for the nonlinear seismic analysis. In the analysis all the masonry infill panels in effective interaction with the structural frame are considered for the nonlinear modeling of the structure. The influence of the effective masonry infills on the seismic response of the structure is analyzed and it is discussed how the effect of the masonry infills irregularly located within the building can give rise to a worsening of the seismic performance of the structure. It is shown that in the present case a not uniform positioning of the masonry infills within the building can give rise to a fragile structural behavior in the collapse mechanism. Furthermore a comparative analysis is performed by considering both the structure with the effective masonry infills and the bare structural frame. For these two structures a pushover analysis is performed, the relative capacity curves are derived and it is shown that fragile collapse mechanisms can occur depending on the irregular positioning of the effective masonry infills. Accordingly it is discussed how in the present case a decoupling of the effective masonry infills from the structural frame can give rise to a smoother response of the capacity curves. For the examined case of an obsolete building with irregular positioning of the masonry panels, the choice of decoupling the effective masonry panels from the structural frame may facilitate the retrofitting strategies for the achievement of the proper safety factors at the examined limit states.

Seismic Vulnerability of Existing RC Buildings and Influence of the Decoupling of the Effective Masonry Panels from the Structural Frames

2012 ◽  
Vol 256-259 ◽  
pp. 2244-2253 ◽  
Author(s):  
Fabio de Angelis ◽  
Donato Cancellara
Keyword(s):  
Reinforced Concrete ◽  
Seismic Vulnerability ◽  
Seismic Analysis ◽  
Effective Interaction ◽  
Collapse Mechanism ◽  
Limit States ◽  
Capacity Curves ◽  
Masonry Infills ◽  
N2 Method ◽  
Structural Frame

In the present work we discuss on the seismic vulnerability of reinforced concrete existing buildings. In particular we consider a reinforced concrete building originally designed for only gravitational loads and located in a zone recently defined at seismic risk. According to the Italian seismic code NTC 2008 a displacement based approach is adopted and the N2-method is considered for the nonlinear seismic analysis. In the analysis all the masonry infill panels in effective interaction with the structural frame are considered for the nonlinear modeling of the structure. The influence of the effective masonry infills on the seismic response of the structure is analyzed and it is discussed how the effect of the masonry infills irregularly located within the building can give rise to a worsening of the seismic performance of the structure. It is shown that in the present case a not uniform positioning of the masonry infills within the building can give rise to a fragile structural behavior in the collapse mechanism. Furthermore a comparative analysis is performed by considering both the structure with the effective masonry infills and the bare structural frame. For these two structures a pushover analysis is performed, the relative capacity curves are derived and it is shown that fragile collapse mechanisms can occur depending on the irregular positioning of the effective masonry infills. Accordingly it is discussed how in the present case a decoupling of the effective masonry infills from the structural frame can give rise to a smoother response of the capacity curves. For the examined case of an obsolete building with irregular positioning of the masonry panels, the choice of decoupling the effective masonry panels from the structural frame may facilitate the retrofitting strategies for the achievement of the proper safety factors at the examined limit states.

scholarly journals Fragility curves for Italian URM buildings based on a hybrid method

2021 ◽  
Author(s):  
A. Sandoli ◽  
G. P. Lignola ◽  
B. Calderoni ◽  
A. Prota
Keyword(s):  
Seismic Vulnerability ◽  
Fragility Curves ◽  
Limit State ◽  
Ultimate Limit State ◽  
Masonry Building ◽  
Masonry Buildings ◽  
Seismic Behaviour ◽  
Building Stock ◽  
Ground Acceleration ◽  
Damage Scenario

AbstractA hybrid seismic fragility model for territorial-scale seismic vulnerability assessment of masonry buildings is developed and presented in this paper. The method combines expert-judgment and mechanical approaches to derive typological fragility curves for Italian residential masonry building stock. The first classifies Italian masonry buildings in five different typological classes as function of age of construction, structural typology, and seismic behaviour and damaging of buildings observed following the most severe earthquakes occurred in Italy. The second, based on numerical analyses results conducted on building prototypes, provides all the parameters necessary for developing fragility functions. Peak-Ground Acceleration (PGA) at Ultimate Limit State attainable by each building’s class has been chosen as an Intensity Measure to represent fragility curves: three types of curve have been developed, each referred to mean, maximum and minimum value of PGAs defined for each building class. To represent the expected damage scenario for increasing earthquake intensities, a correlation between PGAs and Mercalli-Cancani-Sieber macroseismic intensity scale has been used and the corresponding fragility curves developed. Results show that the proposed building’s classes are representative of the Italian masonry building stock and that fragility curves are effective for predicting both seismic vulnerability and expected damage scenarios for seismic-prone areas. Finally, the fragility curves have been compared with empirical curves obtained through a macroseismic approach on Italian masonry buildings available in literature, underlining the differences between the methods.

Combined flexure and torsion of I-shaped steel beams

1989 ◽  
Vol 16 (2) ◽  
pp. 124-139 ◽  
Author(s):  
Robert G. Driver ◽  
D. J. Laurie Kennedy
Keyword(s):  
Limit State ◽  
Bending Moment ◽  
Phase Behaviour ◽  
Inelastic Interaction ◽  
Steel Beams ◽  
Ultimate Limit State ◽  
Second Phase ◽  
Design Standards ◽  
Limit States ◽  
Interaction Diagram

Design standards provide little information for the design of I-shaped steel beams not loaded through the shear centre and therefore subjected to combined flexure and torsion. In particular, methods for determining the ultimate capacity, as is required in limit states design standards, are not presented. The literature on elastic analysis is extensive, but only limited experimental and analytical work has been conducted in the inelastic region. No comprehensive design procedures, applicable to limit states design standards, have been developed.From four tests conducted on cantilever beams, with varying moment–torque ratios, it is established that the torsional behaviour has two distinct phases, with the second dominated by second-order geometric effects. This second phase is nonutilizable because the added torsional restraint developed is path dependent and, if deflections had been restricted, would not have been significant. Based on the first-phase behaviour, a normal and shearing stress distribution on the cross section is proposed. From this, a moment–torque ultimate strength interaction diagram is developed, applicable to a number of different end and loading conditions. This ultimate limit state interaction diagram and serviceability limit states, based on first yield and on distortion limitations, provide a comprehensive design approach for these members. Key words: beams, bending moment, flexure, inelastic, interaction diagram, I-shaped, limit states, serviceability, steel, torsion, torque, ultimate.

Anchor rod forces and maximum bending moments in sheet pile walls using the factored strength approach

1996 ◽  
Vol 33 (5) ◽  
pp. 815-821 ◽  
Author(s):  
A B Schriver ◽  
A J Valsangkar
Keyword(s):  
Water Pressure ◽  
Limit State ◽  
Bending Moment ◽  
Ultimate Limit State ◽  
Sheet Pile ◽  
Limit States ◽  
Working Stress ◽  
Geotechnical Design ◽  
Ultimate Limit State Design ◽  
Sheet Pile Wall

Recently, the limit states approach using factored strength has been recommended in geotechnical design. Some recent research has indicated that the application of limit states design using recommended load and strength factors leads to conservative designs compared with the conventional methods. In this study the influence of sheet pile wall geometry, type of water pressure distribution, and different methods of analysis on the maximum bending moment and achor rod force are presented. Recommendations are made to make the factored strength design compatible with conventional design. Key words: factored strength, working stress design, ultimate limit state design, anchored sheet pile wall, bending moment, anchor rod force.

Theoretical and Experimental Study on the Ultimate Strength of Corrugated Bulkheads

1997 ◽  
Vol 41 (04) ◽  
pp. 301-317
Author(s):  
Jeom K. Paik ◽  
Anil K. Thayamballi ◽  
Min S. Chun
Keyword(s):  
Ultimate Strength ◽  
Lateral Pressure ◽  
Limit State ◽  
Plate Thickness ◽  
Experimental Information ◽  
Design Guidelines ◽  
Design Parameters ◽  
Collapse Mechanism ◽  
Ultimate Limit State ◽  
Analytical Formulation

The objectives of the present study are to obtain experimental data on collapse strength of steel corrugated bulkhead models and also to develop a simple analytical formulation for ultimate strength useful in the design of corrugated bulkheads under static lateral pressure. Collapse tests on nine mild steel corrugated bulkhead models having five bays of corrugations are carried out, varying the corrugation angle, the plate thickness and the type of loading (axial compression and/or lateral pressure). Using the test data, the characteristics of the collapse mechanism for corrugated bulkheads are investigated. For purposes of rapid first cut estimates of strength, a new and simple analytical formulation for predicting the ultimate strength of corrugated bulkheads under hydrostatic pressure is derived based on an assumed stress distribution over the corrugation cross section at the ultimate limit state. The modeling error associated with the new formulation is established by comparing its predictions with the experimental results. The development of ultimate strength based design guidelines and the effect of design parameters such as the corrugation angle on ultimate strength of a corrugated bulkhead are then discussed. All experimental information and strength data are tabulated, which is a benefit in itself.

scholarly journals Fragility Assessment of a Container Crane under Seismic Excitation Considering Uplift and Derailment Behavior

2019 ◽  
Vol 9 (21) ◽  
pp. 4660
Author(s):  
Quang Huy Tran ◽  
Jungwon Huh ◽  
Nhu Son Doan ◽  
Van Ha Mac ◽  
Jin-Hee Ahn
Keyword(s):  
Structural Damage ◽  
Seismic Vulnerability ◽  
Fragility Curves ◽  
Three Dimensional ◽  
Time History ◽  
Element Model ◽  
Seismic Excitation ◽  
Damage State ◽  
Limit States ◽  
Container Crane

While the container crane is an important part of daily port operations, it has received little attention in comparison with other infrastructures such as buildings and bridges. Crane collapses owing to earthquakes affect the operation of the port and indirectly impact the economy. This study proposes fragility analyses for various damage levels of a container crane, thus enabling the port owner and partners to better understand the seismic vulnerability presented by container cranes. A large number of nonlinear time-history analyses were applied for a three-dimensional (3D) finite element model to quantify the vulnerability of a Korean case-study container crane considering the uplift and derailment behavior. The uncertainty of the demand and capacity of the crane structures were also considered through random variables, i.e., the elastic modulus of members, ground motion profile, and intensity. The results analyzed in the case of the Korean container crane indicated the probability of exceeding the first uplift with or without derailment before the crane reached the structure’s limit states. This implies that under low seismic excitation, the crane may be derailed without any structural damage. However, when the crane reaches the minor damage state, this condition is always coupled with a certain probability of uplift with or without derailment. Furthermore, this study proposes fragility curves developed for different structural periods to enable port stakeholders to assess the risk of their container crane.

scholarly journals Simplified Data-Driven Model for the Moment Curvature of T-Shaped RC Shear Walls

2019 ◽  
Vol 2019 ◽  
pp. 1-16 ◽  
Author(s):  
Bin Wang ◽  
Wenzhe Cai ◽  
Qingxuan Shi
Keyword(s):  
Cross Sections ◽  
Limit State ◽  
Shear Walls ◽  
Load Ratio ◽  
Ultimate Limit State ◽  
Limit States ◽  
Displacement Ductility ◽  
And Performance ◽  
Displacement Based ◽  
Ductility Capacity

Sectional deformation quantities, such as curvature and ductility, are of prime significance in the displacement-based seismic design and performance evaluation of structural members. However, few studies on the estimates of curvatures at different limit states have been performed on asymmetric flanged walls. In this paper, a parametric study was performed for a series of T-shaped wall cross-sections based on moment-curvature analyses. By investigating the effects of the axial load ratio, reinforcement content, material properties, and geometric parameters on curvatures at the yield and ultimate limit state, we interpret the variation in curvature with different influencing factors in detail according to the changes of the neutral axis depth. Based on the regression analyses of the numerical results of 4941 T-shaped cross-sections, simple expressions to estimate the yield curvature and ultimate curvature for asymmetric flanged walls are developed, and simplified estimates of the ductility capacity including curvature ductility and displacement ductility are further deduced. By comparing with the experimental results, we verify the accuracy of the proposed formulas. Such simple expressions will be valuable for the determination of the displacement response of asymmetric flanged reinforced concrete walls.

Seismic Test Methods for Architectural Glazing Systems

1996 ◽  
Vol 12 (1) ◽  
pp. 129-143 ◽  
Author(s):  
Richard A. Behr ◽  
Abdeldjelil Belarbi
Keyword(s):  
Rational Design ◽  
Limit State ◽  
Test Methods ◽  
Test Method ◽  
Ultimate Limit State ◽  
Limit States ◽  
State Data ◽  
Design Procedures ◽  
Seismic Loadings ◽  
Ultimate Limit

An ongoing effort is being made at the University of Missouri-Rolla to develop standard laboratory test methods and codified design procedures for architectural glass under seismic loadings. Recent laboratory work has yielded some promising results regarding the development of an appropriate seismic test method for architectural glass, as well as identifying ultimate limit states that quantify the seismic performance and damage thresholds of various glass types. Specifically, a straightforward “crescendo-like” in-plane dynamic racking test, performed at a constant frequency, has been employed successfully. Two ultimate limit states for architectural glass have been defined: (1) a lower ultimate limit state corresponding to major glass crack pattern formation; and (2) an upper limit state corresponding to significant glass fallout. Early crescendo tests have yielded distinct and repeatable ultimate limit state data for various storefront glass types tested under dynamic racking motions. Crescendo tests will also be used to identify and quantify serviceability limit states for architectural glass and associated glazing components under dynamic loadings. These limit state data will support the development of rational design procedures for architectural glass under seismic loadings.

An Automated Approach for Designing Monopiles Subjected to Lateral Loads

2017 ◽  
Author(s):  
James P. Doherty ◽  
Barry M. Lehane
Keyword(s):  
Limit State ◽  
Ultimate Limit State ◽  
Lateral Loads ◽  
Limit States ◽  
Laterally Loaded Piles ◽  
Improve Design ◽  
Design Procedures ◽  
Automated Algorithm ◽  
Laterally Loaded ◽  
Ultimate Limit

This paper describes an automated algorithm for determining the length and diameter of monopile foundations subject to lateral loads with the aim of minimising the pile weight, whilst satisfying both ultimate and serviceability limit states. The algorithm works by wrapping an optimisation routine around a finite element p - y model for laterally loaded piles. The objective function is expressed as a function representing the pile volume, while the ultimate limit state and serviceability limit states are expressed as optimisation constraints. The approach was found to be accurate and near instantaneous when compared to manual design procedures and may improve design outcomes and reduce design time and costs.

Sign in / Sign up

Export Citation Format

Share Document