scholarly journals The Use of Tunable Optical Absorption Plasmonic Au and Ag Decorated TiO2 Structures as Efficient Visible Light Photocatalysts

Catalysts ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 139 ◽  
Author(s):  
Xiaohong Yang ◽  
Yan Wang ◽  
Lingtong Zhang ◽  
Haitao Fu ◽  
Peng He ◽  
...  
Keyword(s):  
Visible Light ◽  
Noble Metal ◽  
Environmental Remediation ◽  
Noble Metals ◽  
Incident Light ◽  
Perfect Match ◽  
Energy Utilization ◽  
Plasmonic Enhancement ◽  
Research Attention ◽  
Tio2 Particles

Exploring solar-excited heterogeneous photocatalysts by taking advantage of surface plasmon resonance (SPR) has drawn growing research attention. As it could help to pave the way for global sustainable development. The decoration of TiO2 particles with noble metals possessing SPR effects is regarded as one of the most effective solutions. The perfect match of the SPR absorption band with the spectrum of incident light is an essential factor for plasmonic enhancement. However, modifying with sole noble metal is often limited as it tunes wavelength of only several nanometers. To overcome this drawback, an alternative approach can be offered by decoration with more than one noble metal. For instance, Au-Ag co-decoration displays greatly adjustable, composition-dependent SPR agent over a broad range of the visible light spectrum (ca. from 415 to 525 nm). Hence Au-Ag complex is a remarkable candidate for tuning the photo adsorption of TiO2 from UV to visible light. This study presents a novel and tailored method for the fabrication of Au-Ag co-modified TiO2 particles, and how Au-Ag dependent SPR was applied as the visible light-responsive TiO2 based photocatalysts in a simple but reliable way. The fabricated Au-Ag co-decorated TiO2 (AuxAg(1−x)/TiO2) was characterized and proved to own excellent stability and large specific surface area. The optimization of these particles against the wavelength of maximal solar light intensity was confirmed by photo degradation of methylene blue under visible light radiation. This work may provide further insight into the design of TiO2-based composites with improved photocatalytic properties for environmental remediation and renewable energy utilization.

scholarly journals Plasmon Assisted Highly Efficient Visible Light Catalytic CO2 Reduction Over the Noble Metal Decorated Sr-Incorporated g-C3N4

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Muhammad Humayun ◽  
Habib Ullah ◽  
Lang Shu ◽  
Xiang Ao ◽  
Asif Ali Tahir ◽  
...  
Keyword(s):  
Visible Light ◽  
Noble Metal ◽  
Light Absorption ◽  
Density Functional ◽  
Noble Metals ◽  
Resonance Effect ◽  
Noble Metal Nanoparticles ◽  
Localized Surface Plasmon ◽  
High Quantum Efficiency ◽  
Conversion Performance

AbstractThe photocatalytic performance of g-C3N4 for CO2 conversion is still inadequate by several shortfalls including the instability, insufficient solar light absorption and rapid charge carrier’s recombination rate. To solve these problems, herein, noble metals (Pt and Au) decorated Sr-incorporated g-C3N4 photocatalysts are fabricated via the simple calcination and photo-deposition methods. The Sr-incorporation remarkably reduced the g-C3N4 band gap from 2.7 to 2.54 eV, as evidenced by the UV–visible absorption spectra and the density functional theory results. The CO2 conversion performance of the catalysts was evaluated under visible light irradiation. The Pt/0.15Sr-CN sample produced 48.55 and 74.54 µmol h−1 g−1 of CH4 and CO, respectively. These amounts are far greater than that produced by the Au/0.15Sr-CN, 0.15Sr-CN, and CN samples. A high quantum efficiency of 2.92% is predicted for the Pt/0.15Sr-CN sample. Further, the stability of the photocatalyst is confirmed via the photocatalytic recyclable test. The improved CO2 conversion performance of the catalyst is accredited to the promoted light absorption and remarkably enhanced charge separation via the Sr-incorporated mid gap states and the localized surface plasmon resonance effect induced by noble metal nanoparticles. This work will provide a new approach for promoting the catalytic efficiency of g-C3N4 for efficient solar fuel production.

scholarly journals Visible Light-Mediated Sustainable Antibacterial Activity and Osteogenic Functionality of Au and Pt Multi-Coated TiO2 Nanotubes

Materials ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 5976
Author(s):  
Kyoung-Suk Moon ◽  
Young-Bum Park ◽  
Ji-Myung Bae ◽  
Eun-Joo Choi ◽  
Seung-Han Oh
Keyword(s):  
Antibacterial Activity ◽  
Visible Light ◽  
Metal Nanoparticles ◽  
Noble Metal ◽  
Noble Metals ◽  
Human Mesenchymal Stem Cells ◽  
Antibacterial Activities ◽  
Titania Nanotubes ◽  
Noble Metal Nanoparticles ◽  
Low Level Laser Therapy

The visible light reactions of noble metal-based photocatalysts have been increasingly utilized to investigate their antibacterial activities. Furthermore, the photoreactions at various visible light wavelengths for specific combinations of titania nanotubes and noble metal nanoparticles have been found to promote osteogenic functionality. In this investigation, a novel multi-coating combination of noble metals (gold and platinum) on titania nanotubes was assessed using plasmonic photocatalysis and low-level laser therapy at 470 and 600 nm. The results showed that this coating on the nanotubes promoted antibacterial activity and osteogenic functionality. The order in which the gold and platinum coatings were layered onto the titania nanotubes strongly affected the osteogenic performance of the human mesenchymal stem cells. These results have identified a new approach for the development of efficient novel combinations of noble metal nanoparticles and titania nanotubes with visible light responses, sustainable antimicrobial activity, and osteogenic functionality.

scholarly journals Visible Light-Responsive N-Doped TiO2 Photocatalysis: Synthesis, Characterizations, and Applications

2021 ◽  
Author(s):  
Shiwen Du ◽  
Juhong Lian ◽  
Fuxiang Zhang
Keyword(s):  
Solar Energy ◽  
Visible Light ◽  
Environmental Remediation ◽  
Solar Spectrum ◽  
Light Response ◽  
Physicochemical Characteristics ◽  
Energy Utilization ◽  
As Doping ◽  
Energy Applications ◽  
Recent Developments

AbstractPhotocatalysis based on semiconductors has recently been receiving considerable research interest because of its extensive applications in environmental remediation and renewable energy generation. Various semiconductor-based materials that are vital to solar energy utilization have been extensively investigated, among which titanium oxide (TiO2) has attracted considerable attention because of its exceptional physicochemical characteristics. However, the sluggish responsiveness to visible light in the solar spectrum and the inefficient separation of photoinduced electron–hole pairs hamper the practical application of TiO2 materials. To overcome the aforementioned serious drawbacks of TiO2, numerous strategies, such as doping with foreign atoms, particularly nitrogen (N), have been improved in the past few decades. This review aims to provide a comprehensive update and description of the recent developments of N-doped TiO2 materials for visible light-responsive photocatalysis, such as (1) the preparation of N-doped/co-doped TiO2 photocatalysts and (2) mechanistic studies on the reasons for visible light response. Furthermore, the most recent and significant advances in the field of solar energy applications of modified N-doped TiO2 are summarized. The analysis indicated the critical need for further development of these types of materials for the solar-to-energy conversion, particularly for water splitting purposes.

Semiconductor Photocatalysts for Solar-to-Hydrogen Energy Conversion: Recent Advances of CdS

2020 ◽  
Vol 16 ◽  
Author(s):  
Yuxue Wei ◽  
Honglin Qin ◽  
Jinxin Deng ◽  
Xiaomeng Cheng ◽  
Mengdie Cai ◽  
...  
Keyword(s):  
Hydrogen Production ◽  
Visible Light ◽  
Hydrogen Evolution ◽  
Water Splitting ◽  
Visible Light Irradiation ◽  
Noble Metals ◽  
Light Irradiation ◽  
Photocatalytic Hydrogen Evolution ◽  
Theoretical Design ◽  
Recent Developments

Introduction: Solar-driven photocatalytic hydrogen production from water splitting is one of the most promising solutions to satisfy the increasing demands of a rapidly developing society. CdS has emerged as a representative semiconductor photocatalyst due to its suitable band gap and band position. However, the poor stability and rapid charge recombination of CdS restrict its application for hydrogen production. The strategy of using a cocatalyst is typically recognized as an effective approach for improving the activity, stability, and selectivity of photocatalysts. In this review, recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation are summarized. In particular, the factors affecting the photocatalytic performance and new cocatalyst design, as well as the general classification of cocatalysts, are discussed, which includes a single cocatalyst containing noble-metal cocatalysts, non-noble metals, metal-complex cocatalysts, metal-free cocatalysts, and multi-cocatalysts. Finally, future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are described. Background: Photocatalytic hydrogen evolution from water splitting using photocatalyst semiconductors is one of the most promising solutions to satisfy the increasing demands of a rapidly developing society. CdS has emerged as a representative semiconductor photocatalyst due to its suitable band gap and band position. However, the poor stability and rapid charge recombination of CdS restrict its application for hydrogen production. The strategy of using a cocatalyst is typically recognized as an effective approach for improving the activity, stability, and selectivity of photocatalysts. Methods: This review summarizes the recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation. Results: Recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation are summarized. The factors affecting the photocatalytic performance and new cocatalyst design, as well as the general classification of cocatalysts, are discussed, which includes a single cocatalyst containing noble-metal cocatalysts, non-noble metals, metal-complex cocatalysts, metal-free cocatalysts, and multi-cocatalysts. Finally, future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are described. Conclusion: The state-of-the-art CdS for producing hydrogen from photocatalytic water splitting under visible light is discussed. The future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are also described.

scholarly journals Preparation and Photocatalytic Performance for Degradation of Rhodamine B of AgPt/Bi4Ti3O12 Composites

Nanomaterials ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 2206
Author(s):  
Gaoqian Yuan ◽  
Gen Zhang ◽  
Kezhuo Li ◽  
Faliang Li ◽  
Yunbo Cao ◽  
...  
Keyword(s):  
Visible Light ◽  
Noble Metal ◽  
Rhodamine B ◽  
Photocatalytic Performance ◽  
Bimetallic Nanoparticles ◽  
Resonance Effect ◽  
Visible Region ◽  
Photogenerated Electron ◽  
Pt Nanoparticles ◽  
Electron Hole

Loading a noble metal on Bi4Ti3O12 could enable the formation of the Schottky barrier at the interface between the former and the latter, which causes electrons to be trapped and inhibits the recombination of photoelectrons and photoholes. In this paper, AgPt/Bi4Ti3O12 composite photocatalysts were prepared using the photoreduction method, and the effects of the type and content of noble metal on the photocatalytic performance of the catalysts were investigated. The photocatalytic degradation of rhodamine B (RhB) showed that the loading of AgPt bimetallic nanoparticles significantly improved the catalytic performance of Bi4Ti3O12. When 0.10 wt% noble metal was loaded, the degradation rate for RhB of Ag0.7Pt0.3/Bi4Ti3O12 was 0.027 min−1, which was respectively about 2, 1.7 and 3.7 times as that of Ag/Bi4Ti3O12, Pt/Bi3Ti4O12 and Bi4Ti3O12. The reasons may be attributed as follows: (i) the utilization of visible light was enhanced due to the surface plasmon resonance effect of Ag and Pt in the visible region; (ii) Ag nanoparticles mainly acted as electron acceptors to restrain the recombination of photogenerated electron-hole pairs under visible light irradiation; and (iii) Pt nanoparticles acted as electron cocatalysts to further suppress the recombination of photogenerated electron-hole pairs. The photocatalytic performance of Ag0.7Pt0.3/Bi4Ti3O12 was superior to that of Ag/Bi4Ti3O12 and Pt/Bi3Ti4O12 owing to the synergistic effect between Ag and Pt nanoparticles.

Solution Processed Sb2S3-based Photocathode with Enhanced Photocatalytic Performance via Constructing Ultrathin TiO2 Overlayer and Noble Metal Modification

2021 ◽  
Author(s):  
Yanwen Wang ◽  
Rong Liang ◽  
Chao Qin ◽  
Lei Ren ◽  
Zhizhen Ye ◽  
...  
Keyword(s):  
Visible Light ◽  
Noble Metal ◽  
Photocatalytic Performance ◽  
Low Cost ◽  
Light Response ◽  
Solution Processed ◽  
Antimony Sulfide ◽  
Visible Light Response ◽  
Absorbing Material

Antimony sulfide (Sb2S3) is a light absorbing material with strong visible light response, which is suitable for efficient and low-cost photoelectrodes. Nano-structured films have unique advantages in constructing photoelectrodes due...

A renewable photocatalytic system with dramatic photocatalytic activity for H2 evolution and constant light energy utilization: Eosin Y sensitized ZnWO4 nanoplates loaded with CuO nanoparticles

2021 ◽  
Author(s):  
Xiaoluo Bao ◽  
Xiaokun Wang ◽  
Xiangqing Li ◽  
Lixia Qin ◽  
Taiyang Zhang ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Light Intensity ◽  
Incident Light ◽  
Cuo Nanoparticles ◽  
Energy Utilization ◽  
Limited Attention ◽  
Eosin Y ◽  
H2 Evolution ◽  
Incident Light Intensity ◽  
Photocatalytic System

It is necessary for the commercialization of sunlight-driven H2 evolution to develop an efficient photocatalytic system whose energy utilization is independent on incident light intensity. Unfortunately, limited attention has been...

Adsorption of the Gas Molecules (NH3, C2H6O, C3H6O, CO, H2S) on noble metal (Ag, Au, Pt, Pd, Ru)–Doped MoSe2 Monolayer: A First-Principles Study

2021 ◽  
Author(s):  
Lanjuan Zhou ◽  
Sujing Yu ◽  
Yan Yang ◽  
Qi Li ◽  
Tingting Li ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Noble Metal ◽  
First Principles ◽  
Density Functional ◽  
Noble Metals ◽  
Gas Sensing ◽  
Functional Theory ◽  
First Principles Study ◽  
Gas Molecules ◽  
Sensing Performance

In this paper, the effects of five noble metals (Au, Pt, Pd, Ag, Ru) doped MoSe2 on improving gas sensing performance were predicted through density functional theory (DFT) based on...

Sign in / Sign up

Export Citation Format

Share Document