scholarly journals In-Exchanged CHA Zeolites for Selective Dehydrogenation of Ethane: Characterization and Effect of Zeolite Framework Type

Catalysts ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 807
Author(s):  
Zen Maeno ◽  
Xiaopeng Wu ◽  
Shunsaku Yasumura ◽  
Takashi Toyao ◽  
Yasuharu Kanda ◽  
...  
Keyword(s):  
Active Sites ◽  
Temperature Programmed Desorption ◽  
X Ray Diffraction ◽  
Zeolite Framework ◽  
X Ray ◽  
Catalytic Activities ◽  
Ethane Dehydrogenation ◽  
Temperature Programmed

In this study, the characterization of In-exchanged CHA zeolite (In-CHA (SiO2/Al2O3 = 22.3)) was conducted by in-situ X-ray diffraction (XRD) and ammonia temperature-programmed desorption (NH3-TPD). We also prepared other In-exchanged zeolites with different zeolite structures (In-MFI (SiO2/Al2O3 = 22.3), In-MOR (SiO2/Al2O3 = 20), and In-BEA (SiO2/Al2O3 = 25)) and different SiO2/Al2O3 ratios (In-CHA(Al-rich) (SiO2/Al2O3 = 13.7)). Their catalytic activities in nonoxidative ethane dehydrogenation were compared. Among the tested catalysts, In-CHA(Al-rich) provided the highest conversion. From kinetic experiments and in-situ Fourier transform infrared (FTIR) spectroscopy, [InH2]+ ions are formed regardless of SiO2/Al2O3 ratio, serving as the active sites.

Cerium Incorporated Nanocrystalline ZSM-5: An Efficient Catalyst for Friedel Crafts Acylation of Toluene

2020 ◽  
Vol 20 (9) ◽  
pp. 5823-5832
Author(s):  
O. P. Farsana ◽  
Prajitha Kumari ◽  
P. Aneesh
Keyword(s):  
Acetic Anhydride ◽  
Active Sites ◽  
Temperature Programmed Desorption ◽  
Lewis Acidity ◽  
Acylating Agent ◽  
X Ray Diffraction ◽  
Efficient Catalyst ◽  
X Ray ◽  
Temperature Programmed ◽  
Scanning Electron

In this paper, the application of cerium modified nanocrystalline zeolite ZSM-5 as catalyst for Friedel Crafts acylation of toluene was investigated and compared with nanocrystalline ZSM-5. The acylating agent used was acetic anhydride. The zeolite samples were characterized by means of Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDX), Thermal analysis, ammonia temperature-programmed desorption (NH3-TPD) and Nitrogen sorption analysis. The results show an enhanced Lewis acidity, pore volume and surface area for cerium modified ZSM-5 providing a superior accessibility for acetic anhydride and toluene to the active sites compared to the unmodified one, thereby leading to 93% conversion of acetic anhydride, which was higher than that of unmodified ZSM-5 sample.

scholarly journals Characterization of Highly Dispersed Rod- and Particle-Shaped CuFe19Ox Catalysts and Their Shape Effects on WGS

Catalysts ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 635
Author(s):  
Lingjuan Ma ◽  
Dawei Han ◽  
Hongbin Ma ◽  
Longgang Liu ◽  
Huichao Guo
Keyword(s):  
X Ray Diffraction ◽  
X Ray ◽  
In Situ Xrd ◽  
Transmission Electron ◽  
Highly Dispersed ◽  
Shape Effects ◽  
Temperature Programmed ◽  
Water Gas

Highly dispersed CuFe19Ox catalysts with different shapes were prepared and further characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), H2 temperature-programmed reduction (H2-TPR), and in-situ XRD. XRD and TEM results showed that the synthesized CuFe19Ox nanoparticles consisted of CuO and Fe2O3, while CuFe19Ox nanorods consisted of CuFe2O4 and Fe2O3. The reduction properties of CuFe19Ox samples were finely studied by H2-TPR, and the phase composition was identified by in-situ XPS, HR-TEM, and surface TPR (s-TPR). In-situ X-ray photoelectroscopy (XPS) indicated that the metallic Cu and Fe3O4 were the main species after reduction. Moreover, s-TPR studies showed that the reduction performance of copper was significantly affected by the shapes of the Fe3O4 supports. Low-temperature water gas shift (LT-WGS) was chosen to characterize the Cu species on the surface. It was found that reduced CuFe19Ox nanorods had no activity. On the contrary, reduced CuFe19Ox particles showed higher initial WGS activity, where the active Cu0 should originate from the reduction of Cu2O at lower temperatures, as confirmed by the s-TPR profiles.

A Study of Water Influence on Carbon Monoxide Adsorption and Oxidation on Nanocrystals of: γ-Fe2O3, Au/Fe2O3 and MnxZn1-xFe2O4

2006 ◽  
Vol 518 ◽  
pp. 85-90 ◽  
Author(s):  
V. Dondur ◽  
Nenad Radić ◽  
Boško Grbić ◽  
Miha Drofenik
Keyword(s):  
Temperature Programmed Desorption ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
Oxidation Of Co ◽  
X Ray ◽  
Catalytic Activities ◽  
Mixed Ferrite ◽  
Temperature Programmed ◽  
Co Precipitation ◽  
Transition Electron

In this paper the adsorption and oxidation of CO on nanocrystalline Au/γ-Fe2O3, Au/α- Fe2O3, γ-Fe2O3 and a series of mixed ferrite with MnxZn1-xFe2O4 composition are investigated. The catalysts were prepared by co-precipitation method and characterized using X-ray diffraction (XRPD), specific surface (BET), transition electron spectroscopy (TEM) and magnetization measurements. A temperature programmed desorption (TPD) study of the water and CO interaction with nanocrystalline adsorbents is presented. The catalytic activities towards CO oxidation increased in the following order: γ-Fe2O3 < MnxZn1-xFe2O4 < Au/γ-Fe2O3 .

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Synthesis and Characterization of the PANI/ITO Conducting Nanocomposites

2010 ◽  
Vol 663-665 ◽  
pp. 542-545 ◽  
Author(s):  
Bing Jie Zhu ◽  
Xin Wei Wang ◽  
Mei Fang Zhu ◽  
Qing Hong Zhang ◽  
Yao Gang Li ◽  
...  
Keyword(s):  
Doping Concentration ◽  
In Situ Polymerization ◽  
Synthesis And Characterization ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
X Ray ◽  
Maximum Conductivity ◽  
Scanning Electron

The PANI/ITO conducting nanocomposites have been synthesized by in-situ polymerization. The obtained nanocomposites were characterized by X-ray diffraction pattern, scanning electron microscopy and Fourier transform infrared. Electrical conductivity measurements on the samples pressed into pellets showed that the maximum conductivity attained 2.0 ± 0.05 S/cm for PANI/ITO nanocomposites, at ITO doping concentration of 10 wt%. The results of the present work may provide a simple, rapid and efficient approach for preparing PANI/ITO nanocomposites.

scholarly journals Characterization of the Interface Between the Bulk Glass Forming Alloy Zr41Ti14Cu12Ni10Be23 with Pure Metals and Ceramics

2000 ◽  
Vol 15 (7) ◽  
pp. 1617-1621 ◽  
Author(s):  
Jan Schroers ◽  
Konrad Samwer ◽  
Frigyes Szuecs ◽  
William L. Johnson
Keyword(s):  
Sessile Drop ◽  
Bulk Glass ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Glass Forming ◽  
Processing Times ◽  
Thermal Stability Of

The reaction of the bulk glass forming alloy Zr41Ti14Cu12Ni10Be23 (Vit 1) with W, Ta, Mo, AlN, Al2O3, Si, graphite, and amorphous carbon was investigated. Vit 1 samples were melted and subsequently solidified after different processing times on discs of the different materials. Sessile drop examinations of the macroscopic wetting of Vit 1 on the discs as a function of temperature were carried out in situ with a digital optical camera. The reactions at the interfaces between the Vit 1 sample and the different disc materials were investigated with an electron microprobe. The structure and thermal stability of the processed Vit 1 samples were examined by x-ray diffraction and differential scanning calorimetry. The results are discussed in terms of possible applications for composite materials.

Synthesis and Characterization of Tetraphenylphosphonium Tetraazidoborate

2002 ◽  
Vol 57 (6) ◽  
pp. 621-624 ◽  
Author(s):  
Wolfgang Fraenk ◽  
Heinrich Nöth ◽  
Thomas M. Klapötke ◽  
Max Suter
Keyword(s):  
Single Crystal ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray

AbstractTetraphenylphosphonium tetraazidoborate, [P(C6H5)4][B(N3)4], was obtained from B(N3)3 - in situ prepared from BH3 · O(C2H5)2 and HN3 - and [P(C6H5)4][N3]. Recrystallization from an acetonitrile / hexane mixture yielded colorless crystals in 60% yield. The molecular structurewas determined by single crystal X-ray diffraction and the [B(N3)4]- anionwas shown to possess S4 symmetry.

scholarly journals Adsorción del naranja de metilo en solución acuosa sobre hidróxidos dobles laminares

2015 ◽  
Vol 25 (3) ◽  
pp. 25-34 ◽  
Author(s):  
Laura Alicia Ramírez Llamas ◽  
Araceli Jacobo Azuara ◽  
J. Merced Martínez Rosales
Keyword(s):  
Methyl Orange ◽  
Adsorption Capacity ◽  
Dye Adsorption ◽  
Temperature Programmed Desorption ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Suitable Temperature ◽  
Temperature Programmed ◽  
Double Hydroxides

In this paper, layered double hydroxides (LDH) were synthesized and characterized using techniques of Physisorption of Nitrogen, Infrared, Temperature Programmed Desorption, X-Ray Diffraction, TGA and Immersion Microcalorimetry, in order to determine the basic properties of the adsorbent. The methyl orange (MO) is used as a dye and as a result, it is frequently found in effluents from textile industries. The dye adsorption isotherms on LDH were studied as function of pH and temperature. The maximum adsorption capacity of methyl orange on LDH was carried out at pH 5, and the minimum adsorption capacity at pH 11, being 40.2 mg/g and 22.1 mg/g, respectively. Furthermore, the suitable temperature to promote the adsorption of methyl orange on LDH was at 25 °C, as at 35 °C shows a significant decrease. 

scholarly journals Effect of Zirconia Polymorph on Vapor-Phase Ketonization of Propionic Acid

Catalysts ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 768 ◽  
Author(s):  
Shuang Ding ◽  
Jiankang Zhao ◽  
Qiang Yu
Keyword(s):  
Propionic Acid ◽  
Vapor Phase ◽  
Surface Concentration ◽  
X Ray Diffraction ◽  
In Situ Drifts ◽  
X Ray ◽  
Surface Intermediates ◽  
Temperature Programmed ◽  
Diffuse Reflectance Infrared

Vapor-phase ketonization of propionic acid derived from biomass was studied at 300–375 °C over ZrO2 with different zirconia polymorph. The tetragonal ZrO2 (t-ZrO2) are more active than monoclinic ZrO2 (m-ZrO2). The results of characterizations from X-ray diffraction (XRD) and Raman suggest m-ZrO2 and t-ZrO2 are synthesized by the solvothermal method. NH3 and CO2 temperature-programmed desorption (NH3-TPD and CO2-TPD) measurements show that there were more medium-strength Lewis acid base sites with lower coordination exposed on m-ZrO2 relative to t-ZrO2, increasing the adsorption strength of propionic acid. The in situ DRIFTS (Diffuse reflectance infrared Fourier transform spectroscopy) of adsorbed propionic acid under ketonization reaction reveal that as the most abundant surface intermediates, the monodentate propionates are more active than bidentate propionates. In comparison with m-ZrO2, the t-ZrO2 surface favors monodentate adsorption over bidentate adsorption. Additionally, the adsorption strength of monodentate propionate is weaker on t-ZrO2. These differences in adsorption configuration and adsorption strength of propionic acid are affected by the zirconia structure. The higher surface concentration and weaker adsorption strength of monodentate propionates contribute to the higher ketonization rate in the steady state.

Sign in / Sign up

Export Citation Format

Share Document