scholarly journals Properties of Iron-Modified-by-Silver Supported on Mordenite as Catalysts for NOx Reduction

Catalysts ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1156 ◽  
Author(s):  
Perla Sánchez-López ◽  
Yulia Kotolevich ◽  
Evgeny Khramov ◽  
Ramesh Kumar Chowdari ◽  
Miguel Angel Estrada ◽  
...  
Keyword(s):  
Ion Exchange ◽  
Bimetallic Catalysts ◽  
Active Sites ◽  
Nox Reduction ◽  
The State ◽  
Edge Structure ◽  
X Ray ◽  
Disordered Phase ◽  
Activity Test ◽  
X Ray Absorption

A series of mono and bimetallic catalysts based on a Fe-Ag mixture deposited on mordenite was prepared by ion-exchange and evaluated in the catalytic activity test of the de-NOx reaction in the presence of CO/C3H6. The activity results showed that the most active samples were the Fe-containing ones, and at high temperatures, a co-promoter effect of Ag on the activity of Fe catalysts was also observed. The influence of the order of cation deposition on catalysts formation and their physicochemical properties was studied by FTIR (Fourier Transform Infrared Spectroscopy) of adsorbed NO, XANES (X-ray Absorption Near-Edge Structure), and EXAFS (Extended X-ray Absorption Fine Structure) and discussed in terms of the state of iron. Results of Fe K-edge XANES oscillations showed that, in FeMOR catalysts, iron was present in a disordered state as Fe3+ and Fe2+. In FeAgMOR, the prevailing species was Fe3+, while in the AgFeMOR catalyst, the state of iron was intermediate or mixed between FeMOR and FeAgMOR. The Fe K-edge EXAFS results were characteristic of a disordered phase, the first coordination sphere being asymmetric with two different Fe-O distances. In FeAgMOR and AgFeMOR, coordination of Fe-O was similar to Fe2O3 with a few amount of Fe2+ species. We may conclude that, in the bimetallic FeAgMOR and AgFeMOR samples, a certain amount of tetrahedral Al3+ ions in the mordenite framework is replaced by Fe3+ ions, confirming the previous reports that these species are active sites for the de-NOx reaction. Based on the thermodynamic analysis and experimental data, also, it was confirmed that the order of deposition of the components influenced the mechanism of active sites’ formation during the two steps ion-exchange synthesis.

scholarly journals In situ X-ray absorption spectroscopic studies of TiO2 photocatalytic active sites for degradation of trace CHCl3 in drinking water

2021 ◽  
Vol 28 (6) ◽  
Author(s):  
T.-L. Hsiung ◽  
L.-W. Wei ◽  
H.-L. Huang ◽  
H. Paul Wang
Keyword(s):  
Drinking Water ◽  
Photocatalytic Degradation ◽  
Active Sites ◽  
Spectroscopic Studies ◽  
Band Gap Energy ◽  
Disinfection Byproducts ◽  
Edge Structure ◽  
X Ray ◽  
X Ray Absorption

Toxic disinfection byproducts such as trihalomethanes (e.g. CHCl3) are often found after chlorination of drinking water. It has been found that photocatalytic degradation of trace CHCl3 in drinking water generally lacks an expected relationship with the crystalline phase, band-gap energy or the particle sizes of the TiO2-based photocatalysts used such as nano TiO2 on SBA-15 (Santa Barbara amorphous-15), TiO2 clusters (TiO2–SiO2) and atomic dispersed Ti [Ti-MCM-41 (Mobil Composition of Matter)]. To engineer capable TiO2 photocatalysts, a better understanding of their photoactive sites is of great importance and interest. Using in situ X-ray absorption near-edge structure (XANES) spectroscopy, the A1 (4969 eV), A2 (4971 eV) and A3 (4972 eV) sites in TiO2 can be distinguished as four-, five- and six- coordinated Ti species, respectively. Notably, the A2 Ti sites that are the main photocatalytic species of TiO2 are shown to be accountable for about 95% of the photocatalytic degradation of trace CHCl3 in drinking water (7.2 p.p.m. CHCl3 gTiO2 −1 h−1). This work reveals that the A2 Ti species of a TiO2-based photocatalyst are mainly responsible for the photocatalytic reactivity, especially in photocatalytic degradation of CHCl3 in drinking water.

LOCAL STRUCTURE OF THE CHARGE ORDERED La0.5Ca0.5MnO3

2000 ◽  
Vol 14 (25n27) ◽  
pp. 2852-2857
Author(s):  
S. AGRESTINI ◽  
N. L. SAINI ◽  
A. LANZARA ◽  
F. NATALI ◽  
A. BIANCONI
Keyword(s):  
Charge Ordering ◽  
Temperature Dependent ◽  
Edge Structure ◽  
X Ray ◽  
Disordered Phase ◽  
Local Lattice ◽  
Jahn Teller ◽  
Lattice Distortions ◽  
X Ray Absorption ◽  
Absorption Measurements

Local lattice of the charge ordered La 0.5 Ca 0.5 MnO 3 has been studied by temperature dependent Mn K-edge x-ray absorption measurements, using fluorescence detection method, to explore how the local lattice distortions are associated with the charge ordering in this system. The x-ray absorption near edge structure (XANES) reveals an abrupt change in the local MnO 6 octahedral geometry across the charge ordering temperature. The extended x-ray absorption fine structure (EXAFS) analysis shows largely distorted MnO 6 octahedra with coexisting Q 3-type and Q 2-type of Jahn-Teller (JT) modes at low temperature in the commensurate charge ordered phase. We find that small JT distortions persist also in the charge disordered phase at high temperature.

Chemical and orientational imaging of polymeric samples

1994 ◽  
Vol 52 ◽  
pp. 68-69
Author(s):  
H. Ade ◽  
B. Hsiao ◽  
G. Mitchell ◽  
E. Rightor ◽  
A. P. Smith ◽  
...  
Keyword(s):  
Ethylene Terephthalate ◽  
National Laboratory ◽  
Brookhaven National Laboratory ◽  
Carbonyl Groups ◽  
Aromatic Rings ◽  
Edge Structure ◽  
X Ray ◽  
Scanning Transmission ◽  
Polymeric Samples ◽  
X Ray Absorption

We have used the Scanning Transmission X-ray Microscope at beamline X1A (X1-STXM) at Brookhaven National Laboratory (BNL) to acquire high resolution, chemical and orientation sensitive images of polymeric samples as well as point spectra from 0.1 μm areas. This sensitivity is achieved by exploiting the X-ray Absorption Near Edge Structure (XANES) of the carbon K edge. One of the most illustrative example of the chemical sensitivity achievable is provided by images of a polycarbonate/pol(ethylene terephthalate) (70/30 PC/PET) blend. Contrast reversal at high overall contrast is observed between images acquired at 285.36 and 285.69 eV (Fig. 1). Contrast in these images is achieved by exploring subtle differences between resonances associated with the π bonds (sp hybridization) of the aromatic groups of each polymer. PET has a split peak associated with these aromatic groups, due to the proximity of its carbonyl groups to its aromatic rings, whereas PC has only a single peak.

Full-Field Calcium K-Edge X-ray Absorption Near-Edge Structure Spectroscopy on Cortical Bone at the Micron-Scale: Polarization Effects Reveal Mineral Orientation

2016 ◽  
Vol 88 (7) ◽  
pp. 3826-3835 ◽  
Author(s):  
Bernhard Hesse ◽  
Murielle Salome ◽  
Hiram Castillo-Michel ◽  
Marine Cotte ◽  
Barbara Fayard ◽  
...  
Keyword(s):  
Cortical Bone ◽  
Edge Structure ◽  
Full Field ◽  
Polarization Effects ◽  
X Ray ◽  
X Ray Absorption

scholarly journals Database of ab initio L-edge X-ray absorption near edge structure

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Yiming Chen ◽  
Chi Chen ◽  
Chen Zheng ◽  
Shyam Dwaraknath ◽  
Matthew K. Horton ◽  
...  
Keyword(s):  
High Throughput ◽  
Scattering Theory ◽  
Research Community ◽  
Metal Compounds ◽  
Edge Structure ◽  
X Ray ◽  
Initial Release ◽  
Computational Workflow ◽  
X Ray Absorption

AbstractThe L-edge X-ray Absorption Near Edge Structure (XANES) is widely used in the characterization of transition metal compounds. Here, we report the development of a database of computed L-edge XANES using the multiple scattering theory-based FEFF9 code. The initial release of the database contains more than 140,000 L-edge spectra for more than 22,000 structures generated using a high-throughput computational workflow. The data is disseminated through the Materials Project and addresses a critical need for L-edge XANES spectra among the research community.

Theoretical and experimental investigation of point defects in cubic boron nitride

MRS Advances ◽  
2017 ◽  
Vol 2 (29) ◽  
pp. 1545-1550 ◽  
Author(s):  
Nicholas L. McDougall ◽  
Jim G. Partridge ◽  
Desmond W. M. Lau ◽  
Philipp Reineck ◽  
Brant C. Gibson ◽  
...  
Keyword(s):  
Boron Nitride ◽  
Cubic Boron Nitride ◽  
Optical Emission ◽  
Wide Band ◽  
Wide Band Gap ◽  
Edge Structure ◽  
X Ray ◽  
Substitutional Defects ◽  
X Ray Absorption ◽  
Annealing Experiments

ABSTRACTCubic boron nitride (cBN) is a synthetic wide band gap material that has attracted attention due to its high thermal conductivity, optical transparency and optical emission. In this work, defects in cBN have been investigated using experimental and theoretical X-ray absorption near edge structure (XANES). Vacancy and O substitutional defects were considered, with O substituted at the N site (ON) to be the most energetically favorable. All defects produce unique signatures in either the B or N K-edges and can thus be identified using XANES. The calculations coupled with electron-irradiation / annealing experiments strongly suggest that ON is the dominant defect in irradiated cBN and remains after annealing. This defect is a likely source of optical emission in cBN.

Revealing the structural transformation of rutile RuO2via in situ X-ray absorption spectroscopy during the oxygen evolution reaction

2019 ◽  
Vol 48 (21) ◽  
pp. 7122-7129 ◽  
Author(s):  
Chia-Jui Chang ◽  
You-Chiuan Chu ◽  
Hao-Yu Yan ◽  
Yen-Fa Liao ◽  
Hao Ming Chen
Keyword(s):  
Oxygen Evolution ◽  
Structural Transformation ◽  
Absorption Spectroscopy ◽  
Oxygen Evolution Reaction ◽  
The State ◽  
X Ray ◽  
Alkaline Conditions ◽  
X Ray Absorption ◽  
State Of Art

The state-of-art RuO2 catalyst for the oxygen evolution reaction (OER) is measured by using in situ X-ray absorption spectroscopy (XAS) to elucidate the structural transformation during catalyzing the reaction in acidic and alkaline conditions.

Sign in / Sign up

Export Citation Format

Share Document