scholarly journals Analysis of Magnetic Properties of Nano-Particles Due to a Magnetic Dipole in Micropolar Fluid Flow over a Stretching Sheet

Coatings ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 170 ◽  
Author(s):  
Liaqat Ali ◽  
Xiaomin Liu ◽  
Bagh Ali ◽  
Saima Mujeed ◽  
Sohaib Abdal ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Finite Element ◽  
Nusselt Number ◽  
Fluid Flow ◽  
Differential Equations ◽  
Magnetic Dipole ◽  
Stretching Sheet ◽  
Nano Particles ◽  
Boundary Parameter ◽  
The Impact

This article explores the impact of a magnetic dipole on the heat transfer phenomena of different nano-particles Fe (ferromagnetic) and Fe3O4 (Ferrimagnetic) dispersed in a base fluid ( 60 % water + 40 % ethylene glycol) on micro-polar fluid flow over a stretching sheet. A magnetic dipole in the presence of the ferrities of nano-particles plays an important role in controlling the thermal and momentum boundary layers. The use of magnetic nano-particles is to control the flow and heat transfer process through an external magnetic field. The governing system of partial differential equations is transformed into a system of coupled nonlinear ordinary differential equations by using appropriate similarity variables, and the transformed equations are then solved numerically by using a variational finite element method. The impact of different physical parameters on the velocity, the temperature, the Nusselt number, and the skin friction coefficient is shown. The velocity profile decreases in the order Fe (ferromagnetic fluid) and Fe3O4 (ferrimagnetic fluid). Furthermore, it was observed that the Nusselt number is decreasing with the increasing values of boundary parameter ( δ ) , while there is controversy with respect to the increasing values of radiation parameter ( N ) . Additionally, it was observed that the ferromagnetic case gained maximum thermal conductivity, as compared to ferrimagnetic case. In the end, the convergence of the finite element solution was observed; the calculations were found by reducing the mesh size.

scholarly journals The Impact of Nanoparticles Due to Applied Magnetic Dipole in Micropolar Fluid Flow Using the Finite Element Method

Symmetry ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 520 ◽  
Author(s):  
Liaqat Ali ◽  
Xiaomin Liu ◽  
Bagh Ali ◽  
Saima Mujeed ◽  
Sohaib Abdal ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Finite Element Method ◽  
Finite Element ◽  
Differential Equations ◽  
Magnetic Dipole ◽  
Thermal Stratification ◽  
Volume Fraction ◽  
Numerical Technique ◽  
The Impact ◽  
Element Method

The present work examines the effect of different magnetic nanoparticles and the heat transfer phenomena over the stretching sheet with thermal stratification and slips effect. The mixture of water (H 2 O) and ethylene glycol (C 2 H 6 O 2 ) is used as base fluid whereas the paramagnetic, diamagnetic, and ferromagnetic ferrites are taken as nanoparticles. In the presence of ferrite nanoparticles, the magnetic dipole has a significant effect in controlling the rate of heat transfer and the thermal boundary layers. By using suitable similarity transformations, the system of partial differential equations is transformed into nonlinear ordinary differential equations. The numerical solution of resulting equations is found out by using the variational finite element method. The effect of numerous emerging parameters on velocity, temperature, and micro-rotation velocity are represented graphically and analyzed numerically. It has been noticed that comparatively the diamagnetic ferrites have gained maximum thermal conductivity relative to the other nanoparticles. It was also observed that the thermal conduction of nanoparticles increases with the variation of volume fraction. Moreover, with increasing values of thermal stratification the thermal boundary layer thickness decreases and the heat transfer rate increases at the surface. Furthermore, the validation of code and the accuracy of the numerical technique has been confirmed by the assessment of current results with earlier studies.

Impact of Stefan blowing and magnetic dipole on bio-convective flow of Maxwell nanofluid over a stretching sheet

2021 ◽  
pp. 095440892110581
Author(s):  
A. Alhadhrami ◽  
Hassan A. H. Alzahrani ◽  
B. M. Prasanna ◽  
N. Madhukeshwara ◽  
K. C. Rajendraprasad ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Brownian Motion ◽  
Magnetic Dipole ◽  
Stretching Sheet ◽  
High Heat ◽  
Hard Drives ◽  
Linear System Of Equations ◽  
High Heat Transfer ◽  
Non Linear System ◽  
The Impact

The features of ferromagnetic fluids make it supportive for an extensive usage in loudspeakers, magnetic resonance imaging, computer hard drives, directing of magnetic drug and magnetic hyperthermia. Owing to all such potential applications, the current investigation is to understand the relationship between the thermal distribution, magnetic field and resulting fluid flow of Maxwell liquid over a stretching sheet. Investigation of thermal energy and concentration is carried out in the presence of thermal radiation, non-uniform heat sink/source, chemical reaction, Stefan blowing, magnetic dipole, thermophoresis and Brownian motion. Also, microorganisms are considered just to stabilize the suspended nanoparticles. Boundary layer approximation is employed during mathematical derivation. Based on a new constitutive relation, the governing equations are formulated and are reduced into a coupled non-linear system of equations using appropriate transformations. Further, these equations are solved numerically using fourth-order Runge–Kutta method with shooting technique. The impact of involved parameters is discussed and analysed graphically. Outcomes disclose that Newtonian liquid shows high heat transfer when compared to non-Newtonian (Maxwell) liquid for increased values of Brownian motion and thermophoresis parameters. Increased values of Peclet number declines the rate of gyrotactic microorganisms. Finally, an increase in Brownian and thermophoresis motion parameters declines the rate of heat transfer.

Effect of Porous Medium in Stagnation Point Flow of Ferrofluid Due to a Variable Convected Thicked Sheet

2019 ◽  
Vol 141 (11) ◽  
Author(s):  
Maria Imtiaz ◽  
Hira Nazar ◽  
Tasawar Hayat ◽  
Ahmed Alsaedi
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Nusselt Number ◽  
Differential Equations ◽  
Stagnation Point ◽  
Skin Friction Coefficient ◽  
Stagnation Point Flow ◽  
Heat Transfer Analysis ◽  
Series Solutions ◽  
The Impact

Abstract The focus of this paper is to study the effects of stagnation point flow and porous medium on ferrofluid flow over a variable thicked sheet. Heat transfer analysis is discussed by including thermal radiation. Suitable transformations are applied to convert partial differential equations to ordinary differential equations. Convergent results for series solutions are calculated. The impact of numerous parameters on velocity and temperature is displayed for series solutions. Graphical behavior for skin friction coefficient and Nusselt number is also analyzed. Numerical values of Nusselt number are tabulated depending upon various parameters

scholarly journals Magnetohydrodynamic stagnation point on a Casson nanofluid flow over a radially stretching sheet

2020 ◽  
Vol 11 ◽  
pp. 1303-1315
Author(s):  
Ganji Narender ◽  
Kamatam Govardhan ◽  
Gobburu Sreedhar Sarma
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Radiation Effects ◽  
Stretching Sheet ◽  
Nonlinear Partial Differential Equations ◽  
Casson Nanofluid ◽  
Similarity Transformations ◽  
Program Language ◽  
The Impact

This article proposes a numerical model to investigate the impact of the radiation effects in the presence of heat generation/absorption and magnetic field on the magnetohydrodynamics (MHD) stagnation point flow over a radially stretching sheet using a Casson nanofluid. The nonlinear partial differential equations (PDEs) describing the proposed flow problem are reduced to a set of ordinary differential equations (ODEs) via suitable similarity transformations. The shooting technique and the Adams–Moulton method of fourth order are used to obtain the numerical results via the computational program language FORTRAN. Nanoparticles have unique thermal and electrical properties which can improve heat transfer in nanofluids. The effects of pertinent flow parameters on the nondimensional velocity, temperature and concentration profiles are presented. Overall, the results show that the heat transfer rate increases for higher values of the radiation parameter in a Casson nanofluid.

Impact of convective heat transfer and buoyancy on micropolar fluid flow through a porous shrinking sheet: An FEM approach

2021 ◽  
pp. 095440622110456
Author(s):  
Degavath Gopal ◽  
Hina Firdous ◽  
Salman Saleem ◽  
Naikoti Kishan
Keyword(s):  
Heat Transfer ◽  
Finite Element Method ◽  
Finite Element ◽  
Fluid Flow ◽  
Differential Equations ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Micropolar Fluid ◽  
Micropolar Fluid Flow ◽  
Element Method

This paper represents steady two-dimensional boundary layer flow of micropolar fluid flow with impact of convective heat transfer and buoyancy force investigated numerically. The shrinking velocity has been expected to fluctuate linearly with the existence of a fixed point on the sheet. With the assistance of similarity transformations, the governing partial differential equations are transformed into a set of nonlinear ordinary differential equations; these nonlinear ODEs are solved numerically by using the variational finite element method. The current numerical results are obtained from the variational finite element method and compared with the previously published literature work, with which it exists in good agreement. The impact of the flow monitoring parameters on velocity, microrotation and temperature profiles is examined graphically and discussed. The skin friction coefficient and Nusselt numbers are impacts from adjusting various values of the physical parameters and relevant features which are studied.

Analytical Investigation of Nusselt Number and Skin Friction of Fluid Flow Over a Stretching Sheet Using Optimal Homotopy Asymptotic Method

2020 ◽  
Vol 12 (5) ◽  
pp. 657-661
Author(s):  
Zohreh Aliannejadi
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Boundary Layer ◽  
Nusselt Number ◽  
Fluid Flow ◽  
Differential Equations ◽  
Skin Friction ◽  
Flow And Heat Transfer ◽  
Optimal Homotopy Asymptotic Method ◽  
The Magnetic Field

In many cases such as production of metal sheets, the behavior of fluid flow and heat transfer in the neighborhood of a hot plate is very important. The CFD simulation of fluid flow is a widespread study that reveals detail information about the fluid flow in the calculated domain. In this study, the flow and heat transfer of a specific fluid in the above area of a stretching plate is examined analytically to find the variation of skin friction and Nusselt number. For this purpose, the similarity transformations can be employed to achieve the ordinary differential equations from the governing partial differential equations. The optimal homotopy asymptotic method (OHAM) is used to solve the ordinary differential equations which is applicable in solving of nonlinear equations. The effects of magnetic field on the analytical results from solving the equations are evaluated in detail. It is found that the thickness of the flow boundary layer decreases and the thickness of the thermal boundary layer increases by increasing in the magnetic field. Moreover, the Nusselt number is lower and skin friction is higher for the higher values of the magnetic field.

Characteristics of combined heat and mass transfer on mixed convection flow of Sisko fluid model: A numerical study

2020 ◽  
Vol 34 (24) ◽  
pp. 2050255
Author(s):  
Aamir hamid ◽  
Abdul Hafeez ◽  
Masood Khan
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Fluid Flow ◽  
Differential Equations ◽  
Mixed Convection ◽  
Heat And Mass Transfer ◽  
Numerical Study ◽  
Convection Flow ◽  
Sisko Fluid ◽  
The Impact

In this paper, the combined heat and mass transfer of mixed convection, non-similar Sisko fluid flow in the presence of a magnetic field is studied. The combined effects of thermal radiation and heat generation/absorption are examined for Sisko fluid flow via local non-similar method. For the radiative heat transfer, Rosseland approximation model is used. The governing partial differential equations of the present problem are transformed into a system of nonlinear ordinary differential equations by employing the Sparrow–Quack–Boerner local non-similarity method (LNM). The obtained equations are then numerically investigated by utilizing the bvp4c function in MATLAB. The impact of different supervising parameters on the velocity, temperature, skin friction and rate of heat transfer is performed graphically. It is observed that the velocity is more for a higher rate of the buoyancy force parameter while it is less for opposing buoyancy fluid. The thermal boundary layer thickness for the shear thickening fluids is smaller than the shear thinning fluids.

scholarly journals Finite Element Analysis of Variable Viscosity Impact on MHD Flow and Heat Transfer of Nanofluid Using the Cattaneo–Christov Model

Coatings ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 395 ◽  
Author(s):  
Liaqat Ali ◽  
Xiaomin Liu ◽  
Bagh Ali
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Finite Element ◽  
Differential Equations ◽  
Thermal Relaxation ◽  
Fluid Temperature ◽  
Flow And Heat Transfer ◽  
Flux Model ◽  
The Impact ◽  
Heat Flux Model

In this mathematical study, magnetohydrodynamic, time-independent nanofluid flow over a stretching sheet by using the Cattaneo–Christov heat flux model is inspected. The impact of the thermal, solutal boundary and gravitational body forces with the effect of double stratification on the mass flow and heat transfer phenomena is also observed. The temperature-dependent viscosity impact on heat transfer through a moving sheet with capricious heat generation in nanofluids have studied, and the viscosity of the fluid is presumed to deviate as the inverse function of temperature. With the appropriate transformations, the system of partial differential equations is transformed into a system of nonlinear ordinary differential equations. By applying the variational finite element method, the transformed system of equations is solved. The properties of the several parameters for buoyancy, velocity, temperature, stratification, and Brownian motion parameters have examined. The enhancement in the concentration and thermal boundary layer thickness of the nanofluid sheet due to the increment in the viscosity parameter, also increased the temperature and concentration of nanoparticles. Moreover, the fluid temperature declined with the increasing values of thermal relaxation parameter. This displays that the Cattaneo–Christov heat flux model provides a better assessment of temperature distribution. Moreover, confirmation of the code and precision of the numerical method has inveterate with the valuation of the presented results with previous studies.

scholarly journals Biomagnetic Fluid Flow and Heat Transfer Study of Blood with Gold Nanoparticles over a Stretching Sheet in the Presence of Magnetic Dipole

Fluids ◽  
2021 ◽  
Vol 6 (3) ◽  
pp. 113
Author(s):  
Jahangir Alam ◽  
Ghulam Murtaza ◽  
Efstratios Tzirtzilakis ◽  
Mohammad Ferdows
Keyword(s):  
Heat Transfer ◽  
Gold Nanoparticles ◽  
Differential Equations ◽  
Prandtl Number ◽  
Magnetic Dipole ◽  
Biot Number ◽  
Stretching Sheet ◽  
Function Technique ◽  
Suction Parameter ◽  
Flow And Heat Transfer

In this study, we examined the biomagnetic flow and heat transfer of an incompressible electrically conductive fluid (blood) containing gold nanoparticles over a stretching sheet in the presence of a magnetic dipole. In this problem, both principles of magnetohydrodynamics (MHD) and ferrohydrodynamics (FHD) were adopted. Biot number and slip and suction parameters were taken into consideration. The nonlinear partial differential equations were transformed into ordinary differential equations by implementing similarity transformations. The numerical solution was attained by utilizing the bvp4c function technique in MATLAB R2018b software. The influence of pertinent parameters involved in this model, such as ferromagnetic parameter, magnetic field parameter, Grashof number, Eckert number, suction parameter, Biot number, slip parameter and Prandtl number, on the dimensionless velocity, temperature, skin friction and heat transfer rate were analyzed numerically and are represented graphically. Among the numerous results, it was observed that increment in ferromagnetic parameter and Prandtl number results in decrement of the velocity and temperature, respectively. For some values of the parameters, a comparison with the results of other documents in the literature is also made.

Sign in / Sign up

Export Citation Format

Share Document