scholarly journals Crystal Structure and Electrical Characteristics of (0.965)(Li0.03(Na0.5K0.5)0.97)(Nb1−xSbx)O3−0.035(Bi0.5Na0.5)0.9(Sr)0.1ZrO3 Ceramics Doped with CuO, B2O3, and ZnO

Crystals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 859
Author(s):  
Juhyun Yoo ◽  
Sujin Kang
Keyword(s):  
Crystal Structure ◽  
Dielectric Constant ◽  
Electromechanical Coupling ◽  
Piezoelectric Properties ◽  
Temperature Stability ◽  
Electromechanical Coupling Factor ◽  
Coupling Factor ◽  
Electrical Characteristics ◽  
Sintering Aids ◽  
Mechanical Coupling

Recently, the need has arisen to enhance the piezoelectric properties and temperature stability of (Na,K)NbO3 system ceramics. The (0.965)(Li0.03(Na0.5K0.5)0.97)(Nb1−xSbx)O3−0.035 (Bi0.5Na0.5)0.9(Sr)0.1ZrO3 ceramics were newly manufactured using the sintering aids of CuO, B2O3, and ZnO as a function of antimony substitution, and the their crystal structure and electrical characteristics were analyzed. The grain size was apparently refined as the amount of antimony increased. The dielectric constant was enhanced and Curie temperature was decreased due to the content of the antimony substitution. The x = 0.07 sample sintered at 1060 °C presented the best electrical characteristics, which were bulk density = 4.488 g/cm3, piezoelectric constant d33 = 330 pC/N, electromechanical coupling factor kp = 0.427, mechanical coupling factor Qm = 61, and dielectric constant εr = 2521. We believe that the x = 0.07 sample is the best material for piezoelectric speakers.

Dielectric and Piezoelectric Properties of (Na,Ba)(Nb,Ti)O3 Lead-Free Piezoelectric Ceramics

2010 ◽  
Vol 445 ◽  
pp. 55-58 ◽  
Author(s):  
Rintaro Aoyagi ◽  
Makoto Iwata ◽  
Masaki Maeda
Keyword(s):  
Crystal Structure ◽  
Solid Solution ◽  
Dielectric Properties ◽  
Room Temperature ◽  
Electromechanical Coupling ◽  
Piezoelectric Properties ◽  
Electromechanical Coupling Factor ◽  
Coupling Factor ◽  
Lead Free ◽  
Dielectric And Piezoelectric Properties

(Na1-xBax)(Nb1-xTix)O3 (NNBTx; x=0.0-0.21) solid-solution ceramics were synthesized and their crystal structure, dielectric properties and piezoelectric properties were investigated. The crystal structure at room temperature of NNBTx varied from orthorhombic to tetragonal with increasing BaTiO3 content x. The phase boundary between orthorhombic and tetragonal at room temperature was confirmed BT content between x=0.08 and 0.09. For x>0.05, it was found that the Curie temperature was decreased with increasing x. The highest electromechanical coupling factor, kp, and the largest piezoelectric constant, d33, were obtained at x=0.09-0.10.

Dielectric and Piezoelectric Properties of Lead-Free (Na0.5K0.5)NbO3- Bi0.5(Na0.85K0.15)0.5TiO3 Ceramics

2011 ◽  
Vol 211-212 ◽  
pp. 152-155
Author(s):  
Chun Huy Wang
Keyword(s):  
Solid Solution ◽  
Dielectric Constant ◽  
Coupling Coefficient ◽  
Electromechanical Coupling ◽  
Piezoelectric Properties ◽  
Electromechanical Coupling Factor ◽  
Coupling Factor ◽  
Lead Free ◽  
Solid Solution System ◽  
Dielectric And Piezoelectric Properties

Extending the investigations on (Na0.5K0.5)NbO3-based solid solution for lead-free piezoelectric ceramics, this paper consider the complex solid-solution system (Na0.5K0.5)NbO3–Bi0.5(Na0.85K0.15)0.5TiO3[NKN-BNKT]. (Na0.5K0.5)NbO3with 2 ~ 6 mol% Bi0.5(Na0.85K0.15)0.5TiO3has been prepared following the conventional mixed oxide process. A morphotropic phase boundary (MPB) between orthorhombic (O) and hexagonal (H) was found at the composition 0.96NKN-0.04BNKT with correspondingly enhanced dielectric and piezoelectric properties. The electromechanical coupling factor and dielectric constant are higher for compositions near the MPB. The dielectric constant (KT33), planar coupling coefficient (kp) and thickness coupling coefficient (kt)of 0.96NKN-0.04BNKT ceramics were 1273, 34% and 38%, respectively.

Processing and Electrical Properties of KNbO3 Ferroelectric Dense Ceramics Added with Small Amount of Bi2O3 and MnCO3

2006 ◽  
Vol 301 ◽  
pp. 19-22 ◽  
Author(s):  
Takeru Yoshida ◽  
Hajime Nagata ◽  
Tadashi Takenaka
Keyword(s):  
Electrical Properties ◽  
Grain Growth ◽  
Remanent Polarization ◽  
Electromechanical Coupling ◽  
Piezoelectric Properties ◽  
Hysteresis Loops ◽  
Electromechanical Coupling Factor ◽  
Coupling Factor ◽  
Milling Process ◽  
Firing Process

Doping a small quantity of additive Bi2O3 is effective in suppressing the deliquescence of KNbO3 ceramics. When an optimized ball-milling process was included, dense and nondeliquescent KNbO3 ceramics were obtained by a conventional firing process. However, the presence of Bi prevented grain growth (<0.2 μm) and it was one of the causes of low ferroelectricity. Moreover, the insufficient resistivity made the poling treatment difficult. In order to improve the electric properties, a small quantity of additive MnCO3 was also doped into KNbO3 with 0.5 mass% Bi2O3. Codoping of KNbO3 with MnCO3 and Bi2O3 (abbreviated to KNBixMny; x = 0~1.0, y = 0~1.0 in mass%) improved the ferroelectricity of samples, and it also had an effect on the resistivity and densification of sintered bodies. Well-saturated P-E hysteresis loops were observed with any amount of Mn and the largest remanent polarization Pr was about 16 μC/cm2. The piezoelectric properties of KNBi0.5Mn0.3, which had the highest piezoelectricity in this study, are an electromechanical coupling factor k33 and piezoelectric constant d33 of 0.30 and 101 pC/N, respectively.

Influence of Poling Conditions on the Characteristics of PZT Ceramics

2011 ◽  
Vol 284-286 ◽  
pp. 1375-1380 ◽  
Author(s):  
Ming Cheng Chure ◽  
Ping Cheng Chen ◽  
Long Wu ◽  
Bing Huei Chen ◽  
King Kung Wu
Keyword(s):  
Dielectric Constant ◽  
Electromechanical Coupling ◽  
Electromechanical Coupling Factor ◽  
Coupling Factor ◽  
Poling Field ◽  
Pzt Ceramics ◽  
Poling Process ◽  
Poling Temperature ◽  
Higher Temperature ◽  
Planar Electromechanical Coupling Factor

In the poling process of PZT ceramics, the poling temperature is a critical condition. When the poling temperature is too low, no matter how high is the poling field and how long is the poling time, the planar electromechanical coupling factor kpis lower. When the poling temperature is higher enough, the kpcan reach to a saturated value with a lower poling field and short poling time. The variation of dielectric constant with the poling conditions is the same as that of planar electromechanical coupling factor. When poling with a low temperature, the dielectric constant after poling is lower than 1400. When poling with higher temperature, no matter how high is the poling field and how long is the poling time, the dielectric constant after poling is higher than 1500.

The Effects of Ba(Zr0.05Ti0.95)O3 Addition on Piezoelectric Properties and Microstructures of (Na0.5Bi0.5)0.94Ba0.06TiO3 Ceramics

2017 ◽  
Vol 732 ◽  
pp. 69-75
Author(s):  
Tai Kuang Lee ◽  
Jyun Hung Chen ◽  
Ying Chieh Lee
Keyword(s):  
Phase Transition ◽  
Electromechanical Coupling ◽  
Piezoelectric Coefficient ◽  
Piezoelectric Properties ◽  
Electromechanical Coupling Factor ◽  
Coupling Factor ◽  
Doping Content ◽  
Remarkable Effect ◽  
Significant Change

(Na0.5Bi0.5)0.94Ba0.06TiO3 (NBBT) ceramics doped with 0.1∼2.0 mol.% Ba (Zr0.05Ti0.95)O3 were investigated in terms of the sintering, microstructure, phase transition, and piezoelectric properties. BZT doping has no remarkable effect on the microstructure and densification within the studied doping content. Up to 2 mol.% BZT can dissolve into the lattice of NBBT ceramics, and the structure symmetry is not changed. However, a significant change in the piezoelectric properties took place. The piezoelectric coefficient d33 for the 0.1 wt.% BZT-doped NBBT ceramics sintered at 1150 °C was found to be 120 pC/N and the electromechanical coupling factor kp = 0.24.

Investigation on Electrical Properties of CaCu3Ti4O12-Modified (Na,Bi)TiO3-BaTiO3 Lead Free Piezoceramics

2014 ◽  
Vol 887-888 ◽  
pp. 289-293
Author(s):  
Jing Chang Zhao ◽  
Zhen Lai Zhou
Keyword(s):  
Electrical Properties ◽  
Electromechanical Coupling ◽  
Piezoelectric Properties ◽  
Piezoelectric Ceramics ◽  
Electromechanical Coupling Factor ◽  
Coupling Factor ◽  
Mechanical Quality Factor ◽  
Lead Free ◽  
Lead Free Ceramics ◽  
Structure Morphology

(Na,Bi)TiO3-BaTiO3lead free piezoelectric ceramics were fabricated with modification of CaCu3Ti4O12additives. The phase structure, morphology, dielectric and piezoelectric properties of prepared samples were investigated, respectively. It was found that CaCu3Ti4O12additives evidently improve the polarization properties of (Na,Bi)TiO3-BaTiO3lead free ceramics and the obtained samples exhibit an excellent piezoelectric properties (electromechanical coupling factorKp=31%, mechanical quality factorQm=151 and piezoelectric constantd33=160pC/N). According to results, the effect of CaCu3Ti4O12additives on electrical properties of (Na,Bi)TiO3-BaTiO3lead free piezoelectric ceramics is discussed.

Material Design of High-Dielectric-Constant and Large-Electromechanical-Coupling-Factor Relaxor-Based Piezoelectric Ceramics

2005 ◽  
Vol 44 (9B) ◽  
pp. 7046-7049 ◽  
Author(s):  
Yohachi Yohachi ◽  
John John ◽  
textscYamashita textscYamashita ◽  
Yasuharu Hosono
Keyword(s):  
Dielectric Constant ◽  
Electromechanical Coupling ◽  
High Dielectric Constant ◽  
Material Design ◽  
Piezoelectric Ceramics ◽  
Electromechanical Coupling Factor ◽  
Coupling Factor ◽  
High Dielectric

scholarly journals High piezoelectricity after field cooling AC poling in temperature stable ternary single crystals manufactured by continuous-feeding Bridgman method

2021 ◽  
Vol 11 (1) ◽  
pp. 57-65
Author(s):  
Cong Luo ◽  
Tomoaki Karaki ◽  
Zhuangkai Wang ◽  
Yiqin Sun ◽  
Yohachi Yamashita ◽  
...  
Keyword(s):  
Single Crystals ◽  
Electromechanical Coupling ◽  
Piezoelectric Properties ◽  
Electromechanical Coupling Factor ◽  
Coupling Factor ◽  
Wide Range ◽  
Device Applications ◽  
Continuous Feeding ◽  
High Dielectric ◽  
Field Cooling

AbstractAfter field cooling (FC) alternating current poling (ACP), we investigated the dielectric and piezoelectric properties of [001]pc-oriented 0.24Pb(In1/2Nb1/2)O3 (PIN)-0.46Pb(Mg1/3Nb2/3)O3 (PMN)-0.30PbTiO3 (PT) (PIMN-0.30PT) single crystals (SCs), which were manufactured by continuous-feeding Bridgman (CF BM) within morphotropic phase boundary (MPB) region. By ACP with 4 kVrms/cm from 100 to 70 °C, the PIMN-0.30PT SC attained high dielectric permittivity (ε33T/ε0) of 8330, piezoelectric coefficient (d33) of 2750 pC/N, bar mode electromechanical coupling factor k33 of 0.96 with higher phase change temperature (Tpc) of 103 °C, and high Curie temperature (TC) of 180 °C. These values are the highest ever reported as PIMN-xPT SC system with Tpc > 100 °C. The enhancement of these properties is attributed to the induced low symmetry multi-phase supported by phase analysis. This work indicates that FC ACP is a smart and promising method to enhance piezoelectric properties of relaxor-PT ferroelectric SCs including PIMN-xPT, and provides a route to a wide range of piezoelectric device applications.

Ultrahigh Piezoelectricity After Field Cooling AC Poling in Ferroelectric Crystals Manufactured by Continuous-feeding Bridgman

2021 ◽  
Author(s):  
Cong Luo ◽  
Tomoaki Karaki ◽  
Zhuangkai Wang ◽  
Yiqin Sun ◽  
Yohachi Yamashita ◽  
...  
Keyword(s):  
Electromechanical Coupling ◽  
Piezoelectric Properties ◽  
Electromechanical Coupling Factor ◽  
Coupling Factor ◽  
Wide Range ◽  
Device Applications ◽  
Change Temperature ◽  
Continuous Feeding ◽  
Multi Phase ◽  
Field Cooling

Abstract We investigated the dielectric and piezoelectric properties of [001]-oriented 0.24Pb(In1/2Nb1/2)O3-0.46Pb(Mg1/3Nb2/3)O3-0.30PbTiO3 (PIMN-0.30PT) single crystals (SCs) manufactured by continuous-feeding Bridgman (CF BM) within morphotropic phase boundary (MPB) region after field cooling alternating current poling (FC ACP). By optimized the FC ACP conditions of 4 kVrms/cm from 100 to 70 oC, the PIMN-0.30PT SC process attained ultrahigh dielectric permittivity (εT 33/ε0) of 8330 and piezoelectric coefficient (d33) of 2750 pC/N, and bar mode electromechanical coupling factor k33 of 0.96 with higher phase change temperature (Tpc) of 103 oC, respectively. These values are the highest ever reported as PIMN-xPT system SCs with Tpc > 100 oC. The enhancement of these properties of the PIMN-0.30PT SC is attributed to the induced low symmetry multi-phase supported by phase analysis. This work indicates that FC ACP is a smart and promising method to enhance piezoelectric properties of relaxor-PT ferroelectric SCs including PIMNT, which provide a route to a wide range of piezoelectric device applications.

Sign in / Sign up

Export Citation Format

Share Document