Media engineering in marine diatom Phaeodactylum tricornutum employing cost-effective substrates for sustainable production of high value renewables

Phaeodactylum tricornutum is a marine diatom, and well-studied model of unicellular microalga. This diatom contains a wide range of high-value renewables (HVRs) with high commercial relevance owing to their importance in human nutrition and health. In this study, we screened P. tricornutum for biomass, eicosapentaenoic acid (EPA) and fucoxanthin production under photoautotrophic and mixotrophic condition with various substrate combinations. Results highlights that culture supplemented with glycerol and urea lead to enhanced biomass, biochemical and HVR production. Further continuous feeding of urea in glycerol supplemented medium results in an increase in biomass yield (0.77 g L-1) by ~ 2-fold. Additionally, continuous feeding of urea channelizes the carbon flux towards biosynthesis of fatty acids increasing FAME content by ~2-fold as compared to the control conditions. Overall EPA and fucoxanthin production was 27 mg L-1 and 11 mg L-1 (~2 & 4 fold) in urea fed cultures respectively. Present study demonstrates efficient valorization of cost-effective substrates such as glycerol and urea for the production of high-value renewables in P. tricornutum.

High piezoelectricity after field cooling AC poling in temperature stable ternary single crystals manufactured by continuous-feeding Bridgman method

After field cooling (FC) alternating current poling (ACP), we investigated the dielectric and piezoelectric properties of [001]pc-oriented 0.24Pb(In1/2Nb1/2)O3 (PIN)-0.46Pb(Mg1/3Nb2/3)O3 (PMN)-0.30PbTiO3 (PT) (PIMN-0.30PT) single crystals (SCs), which were manufactured by continuous-feeding Bridgman (CF BM) within morphotropic phase boundary (MPB) region. By ACP with 4 kVrms/cm from 100 to 70 °C, the PIMN-0.30PT SC attained high dielectric permittivity (ε33T/ε0) of 8330, piezoelectric coefficient (d33) of 2750 pC/N, bar mode electromechanical coupling factor k33 of 0.96 with higher phase change temperature (Tpc) of 103 °C, and high Curie temperature (TC) of 180 °C. These values are the highest ever reported as PIMN-xPT SC system with Tpc > 100 °C. The enhancement of these properties is attributed to the induced low symmetry multi-phase supported by phase analysis. This work indicates that FC ACP is a smart and promising method to enhance piezoelectric properties of relaxor-PT ferroelectric SCs including PIMN-xPT, and provides a route to a wide range of piezoelectric device applications.

Personalized Feeding Infusion Rate of Nutrition to Improve Glycemic Variability Control in Critical Care Patients

Control-based algorithms in the intensive care unit (ICU) patients have been developed to deliver a sufficient amount of insulin, but optimizing the rate of feeding of nutrition in ICU patients to improve glycemic variability control has not been done yet. Continuous feeding is commonly used for nutrition in critically ill patients who cannot be fed orally to maintain a normal blood sugar concentration, but optimizing its rate, for these individuals, is needed to avoid the adverse outcomes caused by medications such as insulin. This paper develops a control-based algorithm combines a predictive control algorithm with a revised nonlinear compartmental model used in the ICU to design personalized feeding function rates to improve patient glycemic variability. Our control algorithm is robust and acts very quickly to avoid medical intervention effects.

Robust bacterial co-occurence community structures are independent of r- and K-selection history

Selection for bacteria which are K-strategists instead of r-strategists has been shown to improve fish health and survival in aquaculture. We considered an experiment where microcosms were inoculated with natural seawater and the selection regime was switched from K-selection (by continuous feeding) to r-selection (by pulse feeding) and vice versa. We found the networks of significant co-occurrences to contain clusters of taxonomically related bacteria having positive associations. Comparing this with the time dynamics, we found that the clusters most likely were results of similar niche preferences of the involved bacteria. In particular, the distinction between r- or K-strategists was evident. Each selection regime seemed to give rise to a specific pattern, to which the community converges regardless of its prehistory. Furthermore, the results proved robust to parameter choices in the analysis, such as the filtering threshold, level of random noise, replacing absolute abundances with relative abundances, and the choice of similarity measure. Even though our data and approaches cannot directly predict ecological interactions, our approach provides insights on how the selection regime affects the composition of the microbial community, providing a basis for aquaculture experiments targeted at eliminating opportunistic fish pathogens.

Prospective randomised trial of bolus vs. continuous regime of jejunostomy feed

Enteral alimentation can be administered continuously, cyclically, intermittently, or by a bolus technique. Current literature does not suggest superiority of any one regime. Most studies have used nasogastric feeds, little is known about the outcome of jejunal feeding. This study compares the efficiency and safety of bolus and continuous jejunostomy feeding. 46 adults undergoing a feeding jejunostomy for nutritional support or as an adjunct to a major upper GI surgery, were randomised to bolus feeding (BF group, n = 24) and continuous feeding (CF group, n = 22). Demographic, anthropometric, and laboratory parameters were measured preoperatively and on post-operative days (POD) 3, 7, 15, and 30. These parameters; as well as nutritional and functional outcomes, and complications at POD 30; were comparable in both groups. Both groups tolerated jejunal feeds well. Bolus feeding is simple, inexpensive, and permits daily physical activities. Hence it may be preferred over continuous jejunostomy feeding for enteral alimentation.

Remelting and Addition of Alloy Components

This chapter discusses our scientific understanding of alloying. Class I alloy additions have a melting point lower than the bulk melt temperature, whereas class II additions have a melting point higher than the bulk melt temperature. This means that magnesium is a class I element when added to aluminium, and silicon and manganese are class II alloy additions. An energy conservation model for melting is presented and compared to measurements. A numerical model is presented for continuous feeding and melting of aluminium plates into aluminium melt. For class II alloy additions it is shown from the literature that the melting rate can be strongly affected by the formation of intermetallic phases during the melting process. Therefore, it is virtually impossible to put up a general model for the melting of these types of alloying elements. Safety regarding alloying operations is also addressed.

Intermittent bolus feeding does not enhance protein synthesis, myonuclear accretion, or lean growth more than continuous feeding in a premature piglet model

Optimizing enteral nutrition for premature infants may help mitigate extrauterine growth restriction and adverse chronic health outcomes. Previously, we showed in neonatal pigs born at term that lean growth is enhanced by intermittent bolus compared to continuous feeding. The objective was to determine if prematurity impacts how body composition, muscle protein synthesis, and myonuclear accretion respond to feeding modality. Following preterm delivery, pigs were fed equivalent amounts of formula delivered either as intermittent boluses (INT; n = 30) or continuously (CONT; n = 14) for 21 days. Body composition was measured by DXA and muscle growth was assessed by morphometry, myonuclear accretion, and satellite cell abundance. Tissue anabolic signaling and fractional protein synthesis rates were determined in INT pigs in postabsorptive (INT-PA) and postprandial (INT-PP) states and in CONT pigs. Body weight gain and composition did not differ between INT and CONT pigs. Longissimus dorsi (LD) protein synthesis was 34% greater in INT-PP than INT-PA pigs (P < 0.05) but was not different between INT-PP and CONT pigs. Phosphorylation of 4EBP1 and S6K1 and eIF4E·eIF4G abundance in LD paralleled changes in LD protein synthesis. Satellite cell abundance, myonuclear accretion, and fiber cross-sectional area in LD did not differ between groups. These results suggest that, unlike pigs born at term, intermittent bolus feeding does not enhance lean growth more than continuous feeding in pigs born preterm. Premature birth attenuates the capacity of skeletal muscle to respond to cyclical surges in insulin and amino acids with intermittent feeding in early postnatal life.