scholarly journals Modeling Power GaN-HEMTs Using Standard MOSFET Equations and Parameters in SPICE

Electronics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 130
Author(s):  
Utkarsh Jadli ◽  
Faisal Mohd-Yasin ◽  
Hamid Amini Moghadam ◽  
Peyush Pande ◽  
Mayank Chaturvedi ◽  
...  
Keyword(s):  
High Electron Mobility Transistor ◽  
Parameter Extraction ◽  
High Electron ◽  
Power Electronic ◽  
Static And Dynamic Characteristics ◽  
Circuit Simulator ◽  
Gan Hemt ◽  
Power Electronic Circuits ◽  
Level 3 ◽  
Gan Hemts

The device library in the standard circuit simulator (SPICE) lacks a gallium nitride based high-electron-mobility-transistor (GaN-HEMT) model, required for the design and verification of power-electronic circuits. This paper shows that GaN-HEMTs can be modeled by selected equations from the standard MOSFET LEVEL 3 model in SPICE. A method is proposed for the extraction of SPICE parameters in these equations. The selected equations and the proposed parameter-extraction method are verified with measured static and dynamic characteristics of commercial GaN-HEMTs. Furthermore, a double pulse test is performed in LTSpice and compared to its manufacturer model to demonstrate the effectiveness of the MOSFET LEVEL 3 model. The advantage of the proposed approach to use the MOSFET LEVEL 3 model, in comparison to the alternative behavioral-based model provided by some manufacturers, is that users can apply the proposed method to adjust the parameters of the MOSFET LEVEL 3 model for the case of manufacturers who do not provide SPICE models for their HEMTs.

Electrical modeling of packaged GaN HEMT dedicated to internal power matching in S-band

2012 ◽  
Vol 4 (5) ◽  
pp. 495-503 ◽  
Author(s):  
Jérôme Chéron ◽  
Michel Campovecchio ◽  
Denis Barataud ◽  
Tibault Reveyrand ◽  
Michel Stanislawiak ◽  
...  
Keyword(s):  
High Efficiency ◽  
Extraction Procedure ◽  
Equivalent Circuit Model ◽  
High Electron Mobility Transistor ◽  
Oxide Semiconductor ◽  
High Electron ◽  
Electrical Modeling ◽  
Power Matching ◽  
Gan Hemt ◽  
Gan Hemts

The electrical modeling of power packages is a major issue for designers of high-efficiency hybrid power amplifiers. This paper reports the synthesis and the modeling of a packaged Gallium nitride (GaN) High electron mobility transistor (HEMT) associating a nonlinear model of the GaN HEMT die with an equivalent circuit model of the package. The extraction procedure is based on multi-bias S-parameter measurements of both packaged and unpackaged (on-wafer) configurations. Two different designs of 20 W packaged GaN HEMTs illustrate the modeling approach that is validated by time-domain load-pull measurements in S-band. The advantage of the electrical modeling dedicated to packaged GaN HEMTs is to enable a die-package co-design for power matching. Internal matching elements such as Metal oxide semiconductor (MOS) capacitors, Monolithic microwave integrated circuits (MMICs), and bond wires can be separately modeled to ensure an efficient optimization of the package for high power Radio frequency (RF) applications.

scholarly journals The Influence of the Different Repair Methods on the Electrical Properties of the Normally off p-GaN HEMT

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 131
Author(s):  
Di Niu ◽  
Quan Wang ◽  
Wei Li ◽  
Changxi Chen ◽  
Jiankai Xu ◽  
...  
Keyword(s):  
Electrical Properties ◽  
Electron Gas ◽  
High Electron Mobility Transistor ◽  
Repair Process ◽  
High Electron ◽  
Dimensional Electron ◽  
Two Dimensional Electron Gas ◽  
Gan Hemt ◽  
Gan Hemts ◽  
Dimensional Electron Gas

The influence of the repair process on the electrical properties of the normally off p-GaN high-electron-mobility transistor (HEMT) is studied in detail in this paper. We find that the etching process will cause the two-dimensional electron gas (2DEG) and the mobility of the p-GaN HEMT to decrease. However, the repair process will gradually recover the electrical properties. We study different repair methods and different repair conditions, propose the best repair conditions, and further fabricate the p-GaN HEMTs devices. The threshold voltage of the fabricated device is 1.6 V, the maximum gate voltage is 7 V, and the on-resistance is 23 Ω·mm. The device has a good performance, which proves that the repair conditions can be successfully applied to the fabricate of the p-GaN HEMT devices.

Infrared and Visible—Near Infrared Electroluminescence Developments for FA in AlGaN/GaN HEMTS on SiC

2010 ◽  
Author(s):  
M. Bouya ◽  
D. Carisetti ◽  
J.C. Clement ◽  
N. Malbert ◽  
N. Labat ◽  
...  
Keyword(s):  
Failure Analysis ◽  
Near Infrared ◽  
High Electron Mobility Transistor ◽  
Low Noise ◽  
Civil Defense ◽  
Base Stations ◽  
Infrared Range ◽  
High Electron ◽  
Radar Applications ◽  
Gan Hemts

Abstract HEMT (High Electron Mobility Transistor) are playing a key role for power and RF low noise applications. They are crucial components for the development of base stations in the telecommunications networks and for civil, defense and space radar applications. As well as the improvement of the MMIC performances, the localization of the defects and the failure analysis of these devices are very challenging. To face these challenges, we have developed a complete approach, without degrading the component, based on front side failure analysis by standard (Visible-NIR) and Infrared (range of wavelength: 3-5 µm) electroluminescence techniques. Its complementarities and efficiency have been demonstrated through two case studies.

scholarly journals Physics-Based TCAD Simulation and Calibration of 600 V GaN/AlGaN/GaN Device Characteristics and Analysis of Interface Traps

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 751
Author(s):  
Yu-Lin Song ◽  
Manoj Kumar Reddy ◽  
Luh-Maan Chang ◽  
Gene Sheu
Keyword(s):  
Conduction Band ◽  
Computer Aided Design ◽  
Measurement Data ◽  
High Electron Mobility Transistor ◽  
High Electron ◽  
Device Structure ◽  
Gan Hemt ◽  
Fixed Charges ◽  
Vertical Electric Field ◽  
Aided Design

This study proposes an analysis of the physics-based TCAD (Technology Computer-Aided Design) simulation procedure for GaN/AlGaN/GaN HEMT (High Electron Mobility Transistor) device structures grown on Si (111) substrate which is calibrated against measurement data. The presence of traps and activation energies in the device structure will impact the performance of a device, the source of traps and position of traps in the device remains as a complex exercise until today. The key parameters for the precise tuning of threshold voltage (Vth) in GaN transistors are the control of the positive fixed charges −5 × 1012 cm−2, donor-like traps −3 × 1013 cm−2 at the nitride/GaN interfaces, the energy of the donor-like traps 1.42 eV below the conduction band and the acceptor traps activation energy in the AlGaN layer and buffer regions with 0.59 eV below the conduction band. Hence in this paper, the sensitivity of the trap mechanisms in GaN/AlGaN/GaN HEMT transistors, understanding the absolute vertical electric field distribution, electron density and the physical characteristics of the device has been investigated and the results are in good agreement with GaN experimental data.

scholarly journals A New Study on the Temperature and Bias Dependence of the Kink Effects in S22 and h21 for the GaN HEMT Technology

Electronics ◽  
2018 ◽  
Vol 7 (12) ◽  
pp. 353 ◽  
Author(s):  
Giovanni Crupi ◽  
Antonio Raffo ◽  
Valeria Vadalà ◽  
Giorgio Vannini ◽  
Alina Caddemi
Keyword(s):  
Short Circuit ◽  
Equivalent Circuit Model ◽  
Short Circuit Current ◽  
High Electron Mobility Transistor ◽  
Current Gain ◽  
Device Performance ◽  
High Electron ◽  
Gan Hemt ◽  
Temperature Conditions ◽  
Conventional Instrumentation

The aim of this feature article is to provide a deep insight into the origin of the kink effects affecting the output reflection coefficient (S22) and the short-circuit current-gain (h21) of solid-state electronic devices. To gain a clear and comprehensive understanding of how these anomalous phenomena impact device performance, the kink effects in S22 and h21 are thoroughly analyzed over a broad range of bias and temperature conditions. The analysis is accomplished using high-frequency scattering (S-) parameters measured on a gallium-nitride (GaN) high electron-mobility transistor (HEMT). The experiments show that the kink effects might become more or less severe depending on the bias and temperature conditions. By using a GaN HEMT equivalent-circuit model, the experimental results are analyzed and interpreted in terms of the circuit elements to investigate the origin of the kink effects and their dependence on the operating condition. This empirical analysis provides valuable information, simply achievable by conventional instrumentation, that can be used not only by GaN foundries to optimize the technology processes and, as a consequence, device performance, but also by designers that need to face out with the pronounced kink effects of this amazing technology.

Performance Enhancement of AlGaN/GaN HEMT by Optimization of Device Parameters Considering Nanometer Barrier Layer Thickness

2020 ◽  
Vol 19 (06) ◽  
pp. 2050011
Author(s):  
Yogesh Kumar Verma ◽  
Varun Mishra ◽  
Santosh Kumar Gupta
Keyword(s):  
Performance Enhancement ◽  
High Electron Mobility Transistor ◽  
High Electron ◽  
Barrier Layer Thickness ◽  
Gan Hemt ◽  
Transfer Characteristics ◽  
Strong Inversion ◽  
Present Design ◽  
Device Geometry ◽  
Dimensional Electron Gas

The two-dimensional electron gas (2DEG) at the heterointerface of AlGaN and GaN is a complicated transcendental function of gate voltage, so an analytical charge control model for AlGaN/GaN high electron mobility transistor (HEMT) is presented accounting for all the three regions of operation (i.e., sub-threshold, moderate, and strong-inversion region). In addition to it, the performance of AlGaN/GaN HEMT is highly dependent on the device geometry. Therefore, to get the optimum performance of the device it is advisable to optimize the parameters governing the device geometry. Accordingly, the output and transfer characteristics, threshold voltage, ON current, OFF current, and transconductance are calculated using numerical computations. The present design is tested to calculate the voltage transfer characteristics (VTC) and transient characteristics of the invertor circuit, after the optimization of the device parameters.

A differential extended gate-AlGaN/GaN HEMT sensor for real-time detection of ionic pollutants

2019 ◽  
Vol 11 (31) ◽  
pp. 3981-3986 ◽  
Author(s):  
Lei Zhao ◽  
Xinsheng Liu ◽  
Bin Miao ◽  
Zhiqi Gu ◽  
Jin Wang ◽  
...  
Keyword(s):  
Real Time ◽  
Electron Mobility ◽  
High Electron Mobility Transistor ◽  
High Electron ◽  
High Electron Mobility ◽  
Gan Hemt ◽  
Real Time Detection

In this study, we propose a differential extended gate (DEG)-AlGaN/GaN high electron mobility transistor (HEMT) sensor to detect ionic pollutants in solution.

Effect of GaN Cap Layer on the Electrical Properties of AlGaN/GaN HEMT

2012 ◽  
Vol 217-219 ◽  
pp. 2393-2396 ◽  
Author(s):  
Han Guo ◽  
Wu Tang ◽  
Wei Zhou ◽  
Chi Ming Li
Keyword(s):  
Electrical Properties ◽  
Doping Concentration ◽  
Cutoff Frequency ◽  
High Electron Mobility Transistor ◽  
Current Gain ◽  
High Electron ◽  
Saturation Current ◽  
Gan Hemt ◽  
Cap Layer ◽  
Dimensional Electron Gas

The electrical properties of AlGaN/GaN heterojunction high electron mobility transistor (HEMT) are simulated by using sentaurus software. This paper compares two structures, the HEMT with GaN cap layer and the HEMT without GaN cap layer. The sentaurus software simulates the DC and AC characteristics of the two AlGaN/GaN HEMT structures. The HEMT with GaN cap layer can increase the maximum transconductance gm from 177ms/mm to 399ms/mm when the doping concentration of the cap layer is 3×1018cm-3 compared with the other structure under the same conditions. The simulation results indicate that the HEMT with cap layer can increase maximum transconductance gm, saturation current Ids, current-gain cutoff frequency fT, maximum oscillation frequency fmax and reduce the series resistance of the drain to source compared with the HEMT without GaN cap layer. The large Ids of the HEMT with cap layer is attributed to the increase of the concentration of two dimensional electron gas (2DEG). Moreover, the change of the doping concentration of the cap layer will affect the gm and Ids.

scholarly journals Highly sensitive extended gate-AlGaN/GaN high electron mobility transistor for bioassay applications

RSC Advances ◽  
2017 ◽  
Vol 7 (88) ◽  
pp. 55835-55838 ◽  
Author(s):  
Xiangzhen Ding ◽  
Bin Miao ◽  
Zhiqi Gu ◽  
Baojun Wu ◽  
Yimin Hu ◽  
...  
Keyword(s):  
Electron Mobility ◽  
High Sensitivity ◽  
High Electron Mobility Transistor ◽  
High Electron ◽  
High Electron Mobility ◽  
Gan Hemt ◽  
Highly Sensitive

An extended gate-AlGaN/GaN high electron mobility transistor (EG-AlGaN/GaN HEMT) with a high sensitivity for bioassay has been developed.

scholarly journals Millimeter-wave GaN-based HEMT development at ETH-Zürich

2010 ◽  
Vol 2 (1) ◽  
pp. 33-38 ◽  
Author(s):  
Haifeng Sun ◽  
Diego Marti ◽  
Stefano Tirelli ◽  
Andreas R. Alt ◽  
Hansruedi Benedickter ◽  
...  
Keyword(s):  
Millimeter Wave ◽  
High Speed ◽  
Low Cost ◽  
High Electron Mobility Transistor ◽  
High Resistivity ◽  
High Electron ◽  
Cutoff Frequencies ◽  
Gan Hemts ◽  
The Difference ◽  
Gan On Si

We review the AlGaN/GaN high electron mobility transistor (HEMT) activities in the Millimeter-Wave Electronics Group at ETH-Zürich. Our group's main thrust in the AlGaN/GaN arena is the extension of device bandwidth to higher frequency bands. We demonstrated surprising performances for AlGaN/GaN HEMTs grown on high-resistivity (HR) silicon (111) substrates, and extended cutoff frequencies of 100 nm gate devices well into the millimeter (mm)-wave domain. Our results narrow the performance gap between GaN-on-SiC (or sapphire) and GaN-on-silicon and establish GaN-on-Si as a viable technology for low-cost mm-wave electronics. We here contrast the difference in behaviors observed in our laboratory between nominally identical devices built on high-resistivity silicon (HR-Si) and on sapphire substrates; we show high-speed devices with high-cutoff frequencies and breakdown voltages which combine fT,MAX × BV products as high as 5–10 THz V, and show AlGaN/GaN HEMTs with fT values exceeding 100 GHz on HR-Si. Although the bulk of our activities have so far focused on AlGaN/GaN HEMTs on HR-Si, our process produces excellent device performances when applied to GaN HEMTs on SiC as well: 100 nm gate transistors with fT > 125 GHz have been realized at ETH-Zürich.

Sign in / Sign up

Export Citation Format

Share Document